There are lots of interface, power and endpoint properties that are currently
missing any documentation.
Add a description for them.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
See [PATCH 00/17] at: https://lore.kernel.org/all/[email protected]/
Documentation/ABI/testing/sysfs-bus-usb | 274 ++++++++++++++++++++++++
1 file changed, 274 insertions(+)
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 7269077ce505..2ebe5708b4bc 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -288,3 +288,277 @@ Description:
USB 3.2 adds Dual-lane support, 2 rx and 2 tx -lanes over Type-C.
Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per
direction. Devices before USB 3.2 are single lane (tx_lanes = 1)
+
+What: /sys/bus/usb/devices/usbX/bAlternateSetting
+Description:
+ The current interface alternate setting number, in decimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bcdDevice
+Description:
+ The device's release number, in hexadecimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bConfigurationValue
+Description:
+ While a USB device typically have just one configuration
+ setting, some devices support multiple configurations.
+
+ This value shows the current configuration, in decimal.
+
+ Changing its value will change the device's configuration
+ to another setting.
+
+ The number of configurations supported by a device is at:
+
+ /sys/bus/usb/devices/usbX/bNumConfigurations
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bDeviceClass
+Description:
+ Class code of the device, in hexadecimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bDeviceProtocol
+Description:
+ Protocol code of the device, in hexadecimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bDeviceSubClass
+Description:
+ Subclass code of the device, in hexadecimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bInterfaceClass
+Description:
+ Class code of the interface, in hexadecimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bInterfaceNumber
+Description:
+ Interface number, in hexadecimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bInterfaceProtocol
+Description:
+ Protocol code of the interface, in hexadecimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bInterfaceSubClass
+Description:
+ Subclass code of the interface, in hexadecimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bmAttributes
+Description:
+ Attributes of the current configuration, in hexadecimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bMaxPacketSize0
+Description:
+ Maximum endpoint 0 packet size, in decimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bMaxPower
+Description:
+ Maximum power consumption of the active configuration of
+ the device, in miliamperes.
+
+What: /sys/bus/usb/devices/usbX/bNumConfigurations
+Description:
+ Number of the possible configurations of the device, in
+ decimal. The current configuration is controlled via:
+
+ /sys/bus/usb/devices/usbX/bConfigurationValue
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bNumEndpoints
+Description:
+ Number of endpoints used on this interface, in hexadecimal.
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/bNumInterfaces
+Description:
+ Number of interfaces on this device, in decimal.
+
+What: /sys/bus/usb/devices/usbX/busnum
+Description:
+ Number of the bus.
+
+What: /sys/bus/usb/devices/usbX/configuration
+Description:
+ Contents of the string descriptor associated with the
+ current configuration. It may include the firmware version
+ of a device and/or its serial number.
+
+What: /sys/bus/usb/devices/usbX/descriptors
+Description:
+ Contains the interface descriptors, in binary.
+
+What: /sys/bus/usb/devices/usbX/idProduct
+Description:
+ Product ID, in hexadecimal.
+
+What: /sys/bus/usb/devices/usbX/idVendor
+Description:
+ Vendor ID, in hexadecimal.
+
+What: /sys/bus/usb/devices/usbX/devspec
+Description:
+ Displays the Device Tree Open Firmware node of the interface.
+
+What: /sys/bus/usb/devices/usbX/avoid_reset_quirk
+Description:
+ Most devices have this set to zero.
+
+ If the value is 1, enable a USB quirk that prevents this
+ device to use reset.
+
+ (read/write)
+
+What: /sys/bus/usb/devices/usbX/devnum
+Description:
+ USB interface device number, in decimal.
+
+What: /sys/bus/usb/devices/usbX/devpath
+Description:
+ String containing the USB interface device path.
+
+What: /sys/bus/usb/devices/usbX/manufacturer
+Description:
+ Vendor specific string containing the name of the
+ manufacturer of the device.
+
+What: /sys/bus/usb/devices/usbX/maxchild
+Description:
+ Number of ports of an USB hub
+
+What: /sys/bus/usb/devices/usbX/persist
+Description:
+ Keeps the device even if it gets disconnected.
+
+What: /sys/bus/usb/devices/usbX/product
+Description:
+ Vendor specific string containing the name of the
+ device's product.
+
+What: /sys/bus/usb/devices/usbX/speed
+Description:
+ Shows the device's max speed, according to the USB version,
+ in Mbps.
+ Can be:
+
+ ======= ====================
+ Unknown speed unknown
+ 1.5 Low speed
+ 15 Full speed
+ 480 High Speed
+ 5000 Super Speed
+ 10000 Super Speed+
+ 20000 Super Speed+ Gen 2x2
+ ======= ====================
+
+What: /sys/bus/usb/devices/usbX/supports_autosuspend
+Description:
+ Returns 1 if the device doesn't support autosuspend.
+ Otherwise, returns 0.
+
+What: /sys/bus/usb/devices/usbX/urbnum
+Description:
+ Number of URBs submitted for the whole device.
+
+What: /sys/bus/usb/devices/usbX/version
+Description:
+ String containing the USB device version, as encoded
+ at the BCD descriptor.
+
+What: /sys/bus/usb/devices/usbX/power/autosuspend
+Description:
+ Time in milliseconds for the device to autosuspend. If the
+ value is negative, then autosuspend is prevented.
+
+ (read/write)
+
+What: /sys/bus/usb/devices/usbX/power/active_duration
+Description:
+ The total time the device has not been suspended.
+
+What: /sys/bus/usb/devices/usbX/power/connected_duration
+Description:
+ The total time (in msec) that the device has been connected.
+
+What: /sys/bus/usb/devices/usbX/power/level
+Description:
+
+What: /sys/bus/usb/devices/usbX/ep_<N>/bEndpointAddress
+Description:
+ The address of the endpoint described by this descriptor,
+ in hexadecimal. The endpoint direction on this bitmapped field
+ is also shown at:
+
+ /sys/bus/usb/devices/usbX/ep_<N>/direction
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/ep_<N>/bInterval
+Description:
+ The interval of the endpoint as described on its descriptor,
+ in hexadecimal. The actual interval depends on the version
+ of the USB. Also shown in time units at
+ /sys/bus/usb/devices/usbX/ep_<N>/interval.
+
+What: /sys/bus/usb/devices/usbX/ep_<N>/bLength
+Description:
+ Number of bytes of the endpoint descriptor, in hexadecimal.
+
+What: /sys/bus/usb/devices/usbX/ep_<N>/bmAttributes
+Description:
+ Attributes which apply to the endpoint as described on its
+ descriptor, in hexadecimal. The endpoint type on this
+ bitmapped field is also shown at:
+
+ /sys/bus/usb/devices/usbX/ep_<N>/type
+
+ See USB specs for its meaning.
+
+What: /sys/bus/usb/devices/usbX/ep_<N>/direction
+Description:
+ Direction of the endpoint. Can be:
+
+ - both (on control endpoints)
+ - in
+ - out
+
+What: /sys/bus/usb/devices/usbX/ep_<N>/interval
+Description:
+ Interval for polling endpoint for data transfers, in
+ milisseconds or microseconds.
+
+What: /sys/bus/usb/devices/usbX/ep_<N>/type
+Description:
+ Descriptor type. Can be:
+
+ - Control
+ - Isoc
+ - Bulk
+ - Interrupt
+ - unknown
+
+What: /sys/bus/usb/devices/usbX/ep_<N>/wMaxPacketSize
+Description:
+ Maximum packet size this endpoint is capable of
+ sending or receiving, in hexadecimal.
--
2.31.1