2021-03-29 16:16:38

by Christian Hewitt

[permalink] [raw]
Subject: [PATCH 0/3] arm64: dts: meson: misc ODROID-N2/N2+ changes

This series cleans-up and submits some minor patches used in HardKernel
Linux 5.10 and 5.11 images for the ODROID N2/N2+, and fixes a stray tab.

Christian Hewitt (1):
arm64: dts: meson: remove extra tab from ODROID N2/N2+ ext_mdio node

Hyeonki Hong (2):
arm64: dts: meson: add saradc node to ODROID N2/N2+
arm64: dts: meson: add GPIO line names to ODROID N2/N2+

.../dts/amlogic/meson-g12b-odroid-n2.dtsi | 51 ++++++++++++++++++-
1 file changed, 50 insertions(+), 1 deletion(-)

--
2.17.1


2021-03-29 16:17:42

by Christian Hewitt

[permalink] [raw]
Subject: [PATCH 3/3] arm64: dts: meson: add GPIO line names to ODROID N2/N2+

From: Hyeonki Hong <[email protected]>

Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.

Signed-off-by: Hyeonki Hong <[email protected]>
---
.../dts/amlogic/meson-g12b-odroid-n2.dtsi | 45 +++++++++++++++++++
1 file changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 139c12cf9f66..4489715fc4f3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -446,6 +446,51 @@
};

&gpio {
+ gpio-line-names =
+ /* GPIOZ */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* GPIOH */
+ "", "", "", "", "", "", "", "",
+ "",
+ /* BOOT */
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ /* GPIOC */
+ "", "", "", "", "", "", "", "",
+ /* GPIOA */
+ "PIN_44", /* GPIOA_0 */
+ "PIN_46", /* GPIOA_1 */
+ "PIN_45", /* GPIOA_2 */
+ "PIN_47", /* GPIOA_3 */
+ "PIN_26", /* GPIOA_4 */
+ "", "", "", "", "", "",
+ "PIN_42", /* GPIOA_11 */
+ "PIN_32", /* GPIOA_12 */
+ "PIN_7", /* GPIOA_13 */
+ "PIN_27", /* GPIOA_14 */
+ "PIN_28", /* GPIOA_15 */
+ /* GPIOX */
+ "PIN_16", /* GPIOX_0 */
+ "PIN_18", /* GPIOX_1 */
+ "PIN_22", /* GPIOX_2 */
+ "PIN_11", /* GPIOX_3 */
+ "PIN_13", /* GPIOX_4 */
+ "PIN_33", /* GPIOX_5 */
+ "PIN_35", /* GPIOX_6 */
+ "PIN_15", /* GPIOX_7 */
+ "PIN_19", /* GPIOX_8 */
+ "PIN_21", /* GPIOX_9 */
+ "PIN_24", /* GPIOX_10 */
+ "PIN_23", /* GPIOX_11 */
+ "PIN_8", /* GPIOX_12 */
+ "PIN_10", /* GPIOX_13 */
+ "PIN_29", /* GPIOX_14 */
+ "PIN_31", /* GPIOX_15 */
+ "PIN_12", /* GPIOX_16 */
+ "PIN_3", /* GPIOX_17 */
+ "PIN_5", /* GPIOX_18 */
+ "PIN_36"; /* GPIOX_19 */
/*
* WARNING: The USB Hub on the Odroid-N2 needs a reset signal
* to be turned high in order to be detected by the USB Controller
--
2.17.1

2021-03-30 15:25:35

by Neil Armstrong

[permalink] [raw]
Subject: Re: [PATCH 3/3] arm64: dts: meson: add GPIO line names to ODROID N2/N2+

On 29/03/2021 18:12, Christian Hewitt wrote:
> From: Hyeonki Hong <[email protected]>
>
> Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
>
> Signed-off-by: Hyeonki Hong <[email protected]>
> ---
> .../dts/amlogic/meson-g12b-odroid-n2.dtsi | 45 +++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> index 139c12cf9f66..4489715fc4f3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
> @@ -446,6 +446,51 @@
> };
>
> &gpio {
> + gpio-line-names =
> + /* GPIOZ */
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + /* GPIOH */
> + "", "", "", "", "", "", "", "",
> + "",
> + /* BOOT */
> + "", "", "", "", "", "", "", "",
> + "", "", "", "", "", "", "", "",
> + /* GPIOC */
> + "", "", "", "", "", "", "", "",
> + /* GPIOA */
> + "PIN_44", /* GPIOA_0 */
> + "PIN_46", /* GPIOA_1 */
> + "PIN_45", /* GPIOA_2 */
> + "PIN_47", /* GPIOA_3 */
> + "PIN_26", /* GPIOA_4 */
> + "", "", "", "", "", "",
> + "PIN_42", /* GPIOA_11 */
> + "PIN_32", /* GPIOA_12 */
> + "PIN_7", /* GPIOA_13 */
> + "PIN_27", /* GPIOA_14 */
> + "PIN_28", /* GPIOA_15 */
> + /* GPIOX */
> + "PIN_16", /* GPIOX_0 */
> + "PIN_18", /* GPIOX_1 */
> + "PIN_22", /* GPIOX_2 */
> + "PIN_11", /* GPIOX_3 */
> + "PIN_13", /* GPIOX_4 */
> + "PIN_33", /* GPIOX_5 */
> + "PIN_35", /* GPIOX_6 */
> + "PIN_15", /* GPIOX_7 */
> + "PIN_19", /* GPIOX_8 */
> + "PIN_21", /* GPIOX_9 */
> + "PIN_24", /* GPIOX_10 */
> + "PIN_23", /* GPIOX_11 */
> + "PIN_8", /* GPIOX_12 */
> + "PIN_10", /* GPIOX_13 */
> + "PIN_29", /* GPIOX_14 */
> + "PIN_31", /* GPIOX_15 */
> + "PIN_12", /* GPIOX_16 */
> + "PIN_3", /* GPIOX_17 */
> + "PIN_5", /* GPIOX_18 */
> + "PIN_36"; /* GPIOX_19 */
> /*
> * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
> * to be turned high in order to be detected by the USB Controller
>

Reviewed-by: Neil Armstrong <[email protected]>

2021-03-31 21:41:05

by Kevin Hilman

[permalink] [raw]
Subject: Re: [PATCH 3/3] arm64: dts: meson: add GPIO line names to ODROID N2/N2+

Hi Christian,

Christian Hewitt <[email protected]> writes:

> From: Hyeonki Hong <[email protected]>
>
> Add GPIO line-name identifiers to the ODROID N2/N2+ common dtsi.
>
> Signed-off-by: Hyeonki Hong <[email protected]>

You need to add your SoB here also.

Kevin