This patchs series add support of New Amlogic temperature sensor and minimal
thermal zone for SEI510 and ODROID-N2 boards.
First implementation was doing on IIO[1] but after comments i move on thermal framework.
Formulas and calibration values come from amlogic.
Changes since v6:
- add missing critical trip point.
Changes since v5:
- fix patch 5 and 6 send twice
Changes since v4:
- Move thermal-zone in soc dtsi file
- Remove critical trip point and add passive one
- fix commit message
- use devm_platform_ioremap_resource instead of platform_get_resource
Changes since v3:
- Add cooling map and trip point for hot type
- move compatible on g12a instead of g12 to be aligned with others
- add all reviewer, sorry for this mistake
Changes since v2:
- fix yaml documention
- remove unneeded status variable for temperature-sensor node
- rework driver after Martin review
- add some information in commit message
Changes since v1:
- fix enum vs const in documentation
- fix error with thermal-sensor-cells value set to 1 instead of 0
- add some dependencies needed to add cooling-maps
Dependencies :
- patch 3,4 & 5: depends on Neil's patch and series :
- missing dwc2 phy-names[2]
- patchsets to add DVFS on G12a[3] which have deps on [4] and [5]
[1] https://lore.kernel.org/linux-amlogic/[email protected]/
[2] https://lore.kernel.org/linux-amlogic/[email protected]/
[3] https://lore.kernel.org/linux-amlogic/[email protected]/
[4] https://lore.kernel.org/linux-amlogic/[email protected]/
[5] https://lore.kernel.org/linux-amlogic/[email protected]/
Guillaume La Roque (7):
dt-bindings: thermal: Add DT bindings documentation for Amlogic
Thermal
thermal: amlogic: Add thermal driver to support G12 SoCs
arm64: dts: amlogic: g12: add temperature sensor
arm64: dts: meson: g12: Add minimal thermal zone
arm64: dts: amlogic: g12a: add cooling properties
arm64: dts: amlogic: g12b: add cooling properties
MAINTAINERS: add entry for Amlogic Thermal driver
.../bindings/thermal/amlogic,thermal.yaml | 54 +++
MAINTAINERS | 9 +
.../boot/dts/amlogic/meson-g12-common.dtsi | 77 ++++
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 24 ++
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 29 ++
drivers/thermal/Kconfig | 11 +
drivers/thermal/Makefile | 1 +
drivers/thermal/amlogic_thermal.c | 333 ++++++++++++++++++
8 files changed, 538 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
create mode 100644 drivers/thermal/amlogic_thermal.c
--
2.17.1
Eduardo,
Guillaume La Roque <[email protected]> writes:
> This patchs series add support of New Amlogic temperature sensor and minimal
> thermal zone for SEI510 and ODROID-N2 boards.
[...]
> Guillaume La Roque (7):
> dt-bindings: thermal: Add DT bindings documentation for Amlogic
> Thermal
> thermal: amlogic: Add thermal driver to support G12 SoCs
> arm64: dts: amlogic: g12: add temperature sensor
> arm64: dts: meson: g12: Add minimal thermal zone
> arm64: dts: amlogic: g12a: add cooling properties
> arm64: dts: amlogic: g12b: add cooling properties
> MAINTAINERS: add entry for Amlogic Thermal driver
This has now been thorougly reviewed/tested.
I've queued all the "arm64: dts:" patches via my amlogic tree for v5.5.
Can you please queue up the driver, bindings and MAINTAINERS patch?
Thanks,
Kevin
Hi Kevin,
On 16/10/2019 18:39, Kevin Hilman wrote:
> Eduardo,
>
> Guillaume La Roque <[email protected]> writes:
>
>> This patchs series add support of New Amlogic temperature sensor and minimal
>> thermal zone for SEI510 and ODROID-N2 boards.
>
> [...]
>
>> Guillaume La Roque (7):
>> dt-bindings: thermal: Add DT bindings documentation for Amlogic
>> Thermal
>> thermal: amlogic: Add thermal driver to support G12 SoCs
>> arm64: dts: amlogic: g12: add temperature sensor
>> arm64: dts: meson: g12: Add minimal thermal zone
>> arm64: dts: amlogic: g12a: add cooling properties
>> arm64: dts: amlogic: g12b: add cooling properties
>> MAINTAINERS: add entry for Amlogic Thermal driver
>
> This has now been thorougly reviewed/tested.
>
> I've queued all the "arm64: dts:" patches via my amlogic tree for v5.5.
> Can you please queue up the driver, bindings and MAINTAINERS patch?
1, 2, 7 right?
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Hi Daniel,
Daniel Lezcano <[email protected]> writes:
> On 16/10/2019 18:39, Kevin Hilman wrote:
>> Eduardo,
>>
>> Guillaume La Roque <[email protected]> writes:
>>
>>> This patchs series add support of New Amlogic temperature sensor and minimal
>>> thermal zone for SEI510 and ODROID-N2 boards.
>>
>> [...]
>>
>>> Guillaume La Roque (7):
>>> dt-bindings: thermal: Add DT bindings documentation for Amlogic
>>> Thermal
>>> thermal: amlogic: Add thermal driver to support G12 SoCs
>>> arm64: dts: amlogic: g12: add temperature sensor
>>> arm64: dts: meson: g12: Add minimal thermal zone
>>> arm64: dts: amlogic: g12a: add cooling properties
>>> arm64: dts: amlogic: g12b: add cooling properties
>>> MAINTAINERS: add entry for Amlogic Thermal driver
>>
>> This has now been thorougly reviewed/tested.
>>
>> I've queued all the "arm64: dts:" patches via my amlogic tree for v5.5.
>> Can you please queue up the driver, bindings and MAINTAINERS patch?
>
> 1, 2, 7 right?
Correct.
Thanks,
Kevin