Add missing chosen and memory nodes.
Signed-off-by: Neil Armstrong <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index d399078..f0de884 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -60,6 +60,15 @@
serial1 = &uart_A;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
main_12v: regulator-main_12v {
compatible = "regulator-fixed";
regulator-name = "12V";
--
2.7.4
On Mon, Sep 10, 2018 at 8:33 PM Neil Armstrong <[email protected]> wrote:
>
> Add missing chosen and memory nodes.
>
> Signed-off-by: Neil Armstrong <[email protected]>
out of curiosity:
- does the bootloader add the memory node (meaning that this is just a
cosmetic bit)?
- setting stdout-path is always a good idea, without it you can't use
earlycon (without parameters)
Acked-by: Martin Blumenstingl <[email protected]>
Hi Martin,
On 10/09/2018 20:45, Martin Blumenstingl wrote:
> On Mon, Sep 10, 2018 at 8:33 PM Neil Armstrong <[email protected]> wrote:
>>
>> Add missing chosen and memory nodes.
>>
>> Signed-off-by: Neil Armstrong <[email protected]>
> out of curiosity:
> - does the bootloader add the memory node (meaning that this is just a
> cosmetic bit)?
Yes, but it's always better to already have the node so it only change the memory,
otherwise it has to relocate and insert a node in the middle of the dtb.
> - setting stdout-path is always a good idea, without it you can't use
> earlycon (without parameters)
>
> Acked-by: Martin Blumenstingl <[email protected]>
>
Thanks,
Neil
Neil Armstrong <[email protected]> writes:
> Add missing chosen and memory nodes.
>
> Signed-off-by: Neil Armstrong <[email protected]>
Applied to v4.20/dt64 with Martin's ack.
Thanks,
Kevin