This patchset adds support for the Ugoos AM6, an Android STB based on
the Amlogic W400 reference design with the S922X chipset.
v2: correction of minor nits
v3: address regulator and GPIO corrections from Neil Armstrong (using
schematic excerpts from Ugoos) and related v2 comments from Martin
Blumenstingle. Add acks on patches 1/2 from Rob Herring.
v4: address nits from Martin except for the vcc_3v3 node as it's not
known how to handle the vcc_3v3 regulator managed by ATF firmware, so
it remains untouched/undeclared like other g12a/g12b/sm1 boards.
v5: corrected some tabs v spaces issues introduced in v4.
Christian Hewitt (3):
dt-bindings: Add vendor prefix for Ugoos
dt-bindings: arm: amlogic: Add support for the Ugoos AM6
arm64: dts: meson-g12b-ugoos-am6: add initial device-tree
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 557 +++++++++++++++++++++
4 files changed, 561 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
--
2.7.4
The Ugoos AM6 is based on the Amlogic W400 (G12B) reference design using the
S922X chipset.
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Christian Hewitt <[email protected]>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 325c6fd..2ded61d 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -139,6 +139,7 @@ properties:
items:
- enum:
- hardkernel,odroid-n2
+ - ugoos,am6
- const: amlogic,g12b
...
--
2.7.4
Christian Hewitt <[email protected]> writes:
> This patchset adds support for the Ugoos AM6, an Android STB based on
> the Amlogic W400 reference design with the S922X chipset.
>
> v2: correction of minor nits
>
> v3: address regulator and GPIO corrections from Neil Armstrong (using
> schematic excerpts from Ugoos) and related v2 comments from Martin
> Blumenstingle. Add acks on patches 1/2 from Rob Herring.
>
> v4: address nits from Martin except for the vcc_3v3 node as it's not
> known how to handle the vcc_3v3 regulator managed by ATF firmware, so
> it remains untouched/undeclared like other g12a/g12b/sm1 boards.
>
> v5: corrected some tabs v spaces issues introduced in v4.
Queued for v5.5,
Thanks,
Kevin