This patchset adds minimal support for the SEI Robotics SEI510 Board,
which is based on the Amlogic G12A S905X2 :
and has the following features :
- Amlogic G12A S905X2 SoC
- 10/100 Ethernet
- USB2 + USB3 ports
- Micro SDCard Port
- Audio + CVBS AV Jack port
- HDMI 2.1 + CEC Port
- ADC Touch Button
- Far-Field Microphone Array + Mono HP
- IR Sensor
- IR Emmiter LED Array
- RGB Led
The first patch adds the Shenzhen SEI Robotics Co., Ltd vendor prefix.
Neil Armstrong (2):
vendor-prefixes: Add prefix for Shenzhen SEI Robotics Co., Ltd
arm64: dts: Add SEI Robotics SEI510 Board
.../devicetree/bindings/arm/amlogic.txt | 1 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-g12a-sei510.dts | 38 +++++++++++++++++++
4 files changed, 41 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
--
2.20.1
Add vendor prefix for the Shenzhen SEI Robotics Co., Ltd, a chinese ODM
specialized in Android TV HDMI Stick, OTT Box, Hybrid STB,
Smart Home Gateway & more.
Signed-off-by: Neil Armstrong <[email protected]>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 4615d4b9d11e..921ad8f88ed3 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -343,6 +343,7 @@ sandisk Sandisk Corporation
sbs Smart Battery System
schindler Schindler
seagate Seagate Technology PLC
+seirobotics Shenzhen SEI Robotics Co., Ltd
semtech Semtech Corporation
sensirion Sensirion AG
sff Small Form Factor Committee
--
2.20.1
The SEI Robotics SEI510 Board is based on the Amlogic G12A S905X2
and has the following features :
- Amlogic G12A S905X2 SoC
- 10/100 Ethernet
- USB2 + USB3 ports
- Micro SDCard Port
- Audio + CVBS AV Jack port
- HDMI 2.1 + CEC Port
- ADC Touch Button
- Far-Field Microphone Array + Mono HP
- IR Sensor
- IR Emmiter LED Array
- RGB Led
Signed-off-by: Neil Armstrong <[email protected]>
---
.../devicetree/bindings/arm/amlogic.txt | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-g12a-sei510.dts | 38 +++++++++++++++++++
3 files changed, 40 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 7f40cb5f490b..061f7b98a07f 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -110,6 +110,7 @@ Board compatible values (alphabetically, grouped by SoC):
- "amlogic,u200" (Meson g12a s905d2)
- "amediatech,x96-max" (Meson g12a s905x2)
+ - "seirobotics,sei510" (Meson g12a s905x2)
Amlogic Meson Firmware registers Interface
------------------------------------------
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 0821fed4c074..2709f7ede908 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
new file mode 100644
index 000000000000..6a7c3241862a
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+
+/ {
+ compatible = "seirobotics,sei510", "amlogic,g12a";
+ model = "SEI Robotics SEI510";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ reserved-memory {
+ /* TEE Reserved Memory */
+ bl32_reserved: bl32@5000000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+ };
+};
+
+&uart_AO {
+ status = "okay";
+};
--
2.20.1
Neil Armstrong <[email protected]> writes:
> The SEI Robotics SEI510 Board is based on the Amlogic G12A S905X2
> and has the following features :
> - Amlogic G12A S905X2 SoC
> - 10/100 Ethernet
> - USB2 + USB3 ports
> - Micro SDCard Port
> - Audio + CVBS AV Jack port
> - HDMI 2.1 + CEC Port
> - ADC Touch Button
> - Far-Field Microphone Array + Mono HP
> - IR Sensor
> - IR Emmiter LED Array
> - RGB Led
>
> Signed-off-by: Neil Armstrong <[email protected]>
[...]
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 0821fed4c074..2709f7ede908 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
nit: not sorted alphabetically. I'll move it bofore u200 when applying.
Thanks for the new board support!
Kevin