From: Rafael J. Wysocki <[email protected]>
When a cpufreq policy appears or goes away, the CPU cooling devices for
the CPUs covered by that policy need to be updated so that the new
processor_get_max_state() value is stored as max_state and the
statistics in sysfs are rearranged for each of them.
Do that accordingly in acpi_thermal_cpufreq_init() and
acpi_thermal_cpufreq_exit().
Fixes: a365105c685c("thermal: sysfs: Reuse cdev->max_state")
Reported-by: Wang, Quanxian <[email protected]>
Link: https://lore.kernel.org/linux-pm/[email protected]/
Signed-off-by: Rafael J. Wysocki <[email protected]>
Tested-by: Zhang Rui <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
---
v2 -> v3: Add tags from Rui.
v1 -> v2: Remove the now redundant IS_ERR() checks on cdev before calling
thermal_cooling_device_update().
---
drivers/acpi/processor_thermal.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
Index: linux-pm/drivers/acpi/processor_thermal.c
===================================================================
--- linux-pm.orig/drivers/acpi/processor_thermal.c
+++ linux-pm/drivers/acpi/processor_thermal.c
@@ -140,9 +140,13 @@ void acpi_thermal_cpufreq_init(struct cp
ret = freq_qos_add_request(&policy->constraints,
&pr->thermal_req,
FREQ_QOS_MAX, INT_MAX);
- if (ret < 0)
+ if (ret < 0) {
pr_err("Failed to add freq constraint for CPU%d (%d)\n",
cpu, ret);
+ continue;
+ }
+
+ thermal_cooling_device_update(pr->cdev);
}
}
@@ -153,8 +157,12 @@ void acpi_thermal_cpufreq_exit(struct cp
for_each_cpu(cpu, policy->related_cpus) {
struct acpi_processor *pr = per_cpu(processors, cpu);
- if (pr)
- freq_qos_remove_request(&pr->thermal_req);
+ if (!pr)
+ continue;
+
+ freq_qos_remove_request(&pr->thermal_req);
+
+ thermal_cooling_device_update(pr->cdev);
}
}
#else /* ! CONFIG_CPU_FREQ */