2020-06-29 23:14:51

by Roger Quadros

Subject: [PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support

Hi Tero,

This series adds SERDES PHY support and Type-C USB Super-Speed support
to the J721E EVM.

Please queue this for -next. Thanks.

cheers,
-roger

Changelog:
v4:
- Removed redundant patch
- used compaible string for yaml filename
- typo fix s/mdf/mfd in patch subject
- added simple-mfd, address-cells, size-cells and ranges

v3:
- Add new DT schema for J721E System controller.
- Re-order system controller's compatible string i.e. most compatible to least.

v2:
- Addressed Rob's comments.
- Changed type-C debounce delay from 300ms to 700ms as 300ms is not
sufficient on EVM.


Kishon Vijay Abraham I (2):
arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES
lane mux

Roger Quadros (4):
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system
controller
arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR
line

.../mfd/ti,j721e-system-controller.yaml | 74 +++++
.../dts/ti/k3-j721e-common-proc-board.dts | 33 ++-
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 275 ++++++++++++++++++
include/dt-bindings/mux/mux-j721e-wiz.h | 53 ++++
4 files changed, 433 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

2020-07-17 07:37:07

by Tero Kristo

Subject: Re: [PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support

On 29/06/2020 15:52, Roger Quadros wrote:
> Hi Tero,
>
> This series adds SERDES PHY support and Type-C USB Super-Speed support
> to the J721E EVM.
>
> Please queue this for -next. Thanks.

Queued up for 5.9, thanks.

-Tero

>
> cheers,
> -roger
>
> Changelog:
> v4:
> - Removed redundant patch
> - used compaible string for yaml filename
> - typo fix s/mdf/mfd in patch subject
> - added simple-mfd, address-cells, size-cells and ranges
>
> v3:
> - Add new DT schema for J721E System controller.
> - Re-order system controller's compatible string i.e. most compatible to least.
>
> v2:
> - Addressed Rob's comments.
> - Changed type-C debounce delay from 300ms to 700ms as 300ms is not
> sufficient on EVM.
>
>
> Kishon Vijay Abraham I (2):
> arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
> arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES
> lane mux
>
> Roger Quadros (4):
> dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system
> controller
> arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
> arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
> arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR
> line
>
> .../mfd/ti,j721e-system-controller.yaml | 74 +++++
> .../dts/ti/k3-j721e-common-proc-board.dts | 33 ++-
> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 275 ++++++++++++++++++
> include/dt-bindings/mux/mux-j721e-wiz.h | 53 ++++
> 4 files changed, 433 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h
>

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki