This is the start of the stable review cycle for the 4.9.44 release.
There are 41 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu Aug 17 01:17:56 UTC 2017.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.44-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.44-rc1
Maciej W. Rozycki <[email protected]>
MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
Neil Armstrong <[email protected]>
pinctrl: meson-gxbb: Add missing GPIODV_18 pin entry
Thomas Gleixner <[email protected]>
pinctrl: samsung: Remove bogus irq_[un]mask from resource management
Masahiro Yamada <[email protected]>
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
Masahiro Yamada <[email protected]>
pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
Andy Shevchenko <[email protected]>
pinctrl: intel: merrifield: Correct UART pin lists
Icenowy Zheng <[email protected]>
pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver
Christoph Hellwig <[email protected]>
pnfs/blocklayout: require 64-bit sector_t
Stefan-Gabriel Mirea <[email protected]>
iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits
Sandeep Singh <[email protected]>
usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume
Kai-Heng Feng <[email protected]>
usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter
Bin Liu <[email protected]>
usb: core: unlink urbs from the tail of the endpoint's urb_list
Alan Stern <[email protected]>
USB: Check for dropped connection before switching to full speed
Yoshihiro Shimoda <[email protected]>
usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3
Yoshihiro Shimoda <[email protected]>
usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling
Alan Swanson <[email protected]>
uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069
Ian Abbott <[email protected]>
staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING
Akinobu Mita <[email protected]>
iio: light: tsl2563: use correct event code
Hans de Goede <[email protected]>
iio: accel: bmc150: Always restore device to normal mode after suspend-resume
Arnd Bergmann <[email protected]>
staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read
Rafael J. Wysocki <[email protected]>
USB: hcd: Mark secondary HCD as dead if the primary one died
Bin Liu <[email protected]>
usb: musb: fix tx fifo flush handling again
Greg Kroah-Hartman <[email protected]>
USB: serial: pl2303: add new ATEN device id
Stefan Triller <[email protected]>
USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
Hector Martin <[email protected]>
USB: serial: option: add D-Link DWM-222 device ID
Maarten Lankhorst <[email protected]>
drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut
Wladimir J. van der Laan <[email protected]>
drm/etnaviv: Fix off-by-one error in reloc checking
Weston Andros Adamson <[email protected]>
nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays
Haibo Chen <[email protected]>
mmc: mmc: correct the logic for setting HS400ES signal voltage
Miquel Raynal <[email protected]>
nand: fix wrong default oob layout for small pages using soft ecc
Mateusz Jurczyk <[email protected]>
fuse: initialize the flock flag in fuse_file on allocation
Nicholas Bellinger <[email protected]>
target: Fix node_acl demo-mode + uncached dynamic shutdown regression
Nicholas Bellinger <[email protected]>
iscsi-target: Fix iscsi_np reset hung task during parallel delete
Varun Prakash <[email protected]>
iscsi-target: fix memory leak in iscsit_setup_text_cmd()
Boris Brezillon <[email protected]>
mtd: nand: Fix timing setup for NANDs that do not support SET FEATURES
Max Filippov <[email protected]>
xtensa: don't limit csum_partial export by CONFIG_NET
Max Filippov <[email protected]>
xtensa: mm/cache: add missing EXPORT_SYMBOLs
Max Filippov <[email protected]>
xtensa: fix cache aliasing handling code for WT cache
Mel Gorman <[email protected]>
futex: Remove unnecessary warning from get_futex_key
Cong Wang <[email protected]>
mm: fix list corruptions on shmem shrinklist
Jonathan Toppins <[email protected]>
mm: ratelimit PFNs busy info message
-------------
Diffstat:
Makefile | 4 +-
arch/mips/dec/int-handler.S | 34 +-
arch/xtensa/kernel/xtensa_ksyms.c | 2 -
arch/xtensa/mm/cache.c | 16 +-
drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c | 4 +-
drivers/gpu/drm/i915/intel_color.c | 1 +
drivers/iio/accel/bmc150-accel-core.c | 9 +-
drivers/iio/adc/vf610_adc.c | 2 +-
drivers/iio/light/tsl2563.c | 2 +-
drivers/mmc/core/mmc.c | 2 +-
drivers/mtd/nand/nand_base.c | 12 +-
drivers/pinctrl/intel/pinctrl-merrifield.c | 6 +-
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 1 +
drivers/pinctrl/samsung/pinctrl-exynos.c | 4 -
drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c | 1 +
drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c | 364 +++++++++++----------
drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c | 383 ++++++++++++-----------
drivers/staging/comedi/comedi_fops.c | 3 +
drivers/staging/iio/resolver/ad2s1210.c | 2 +-
drivers/target/iscsi/iscsi_target.c | 2 +
drivers/target/iscsi/iscsi_target_login.c | 7 +-
drivers/target/target_core_tpg.c | 4 +-
drivers/target/target_core_transport.c | 4 +-
drivers/usb/core/hcd.c | 4 +-
drivers/usb/core/hub.c | 10 +-
drivers/usb/core/quirks.c | 4 +
drivers/usb/gadget/udc/renesas_usb3.c | 21 +-
drivers/usb/host/pci-quirks.c | 17 +-
drivers/usb/musb/musb_host.c | 1 +
drivers/usb/renesas_usbhs/rcar3.c | 9 +-
drivers/usb/serial/cp210x.c | 1 +
drivers/usb/serial/option.c | 2 +
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 1 +
drivers/usb/storage/unusual_uas.h | 4 +-
fs/fuse/file.c | 2 +-
fs/nfs/Kconfig | 1 +
fs/nfs/flexfilelayout/flexfilelayoutdev.c | 1 +
include/target/iscsi/iscsi_target_core.h | 1 +
kernel/futex.c | 5 +-
mm/page_alloc.c | 2 +-
mm/shmem.c | 12 +-
42 files changed, 513 insertions(+), 455 deletions(-)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Shevchenko <[email protected]>
commit 5d996132d921c391af5f267123eca1a6a3148ecd upstream.
UART pin lists consist GPIO numbers which is simply wrong.
Replace it by pin numbers.
Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support")
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Mika Westerberg <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/intel/pinctrl-merrifield.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/pinctrl/intel/pinctrl-merrifield.c
+++ b/drivers/pinctrl/intel/pinctrl-merrifield.c
@@ -343,9 +343,9 @@ static const struct pinctrl_pin_desc mrf
static const unsigned int mrfld_sdio_pins[] = { 50, 51, 52, 53, 54, 55, 56 };
static const unsigned int mrfld_spi5_pins[] = { 90, 91, 92, 93, 94, 95, 96 };
-static const unsigned int mrfld_uart0_pins[] = { 124, 125, 126, 127 };
-static const unsigned int mrfld_uart1_pins[] = { 128, 129, 130, 131 };
-static const unsigned int mrfld_uart2_pins[] = { 132, 133, 134, 135 };
+static const unsigned int mrfld_uart0_pins[] = { 115, 116, 117, 118 };
+static const unsigned int mrfld_uart1_pins[] = { 119, 120, 121, 122 };
+static const unsigned int mrfld_uart2_pins[] = { 123, 124, 125, 126 };
static const unsigned int mrfld_pwm0_pins[] = { 144 };
static const unsigned int mrfld_pwm1_pins[] = { 145 };
static const unsigned int mrfld_pwm2_pins[] = { 132 };
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maciej W. Rozycki <[email protected]>
commit 68fe55680d0f3342969f49412fceabb90bdfadba upstream.
Fix a commit 3021773c7c3e ("MIPS: DEC: Avoid la pseudo-instruction in
delay slots") regression and remove assembly errors:
arch/mips/dec/int-handler.S: Assembler messages:
arch/mips/dec/int-handler.S:162: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:163: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:229: Error: Macro used $at after ".set noat"
arch/mips/dec/int-handler.S:230: Error: Macro used $at after ".set noat"
triggering with with the CPU_DADDI_WORKAROUNDS option set and the DADDIU
instruction. This is because with that option in place the instruction
becomes a macro, which expands to an LI/DADDU (or actually ADDIU/DADDU)
sequence that uses $at as a temporary register.
With CPU_DADDI_WORKAROUNDS we only support `-msym32' compilation though,
and this is already enforced in arch/mips/Makefile, so choose the 32-bit
expansion variant for the supported configurations and then replace the
64-bit variant with #error just in case.
Fixes: 3021773c7c3e ("MIPS: DEC: Avoid la pseudo-instruction in delay slots")
Signed-off-by: Maciej W. Rozycki <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/16893/
Signed-off-by: Ralf Baechle <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/dec/int-handler.S | 34 ++++++----------------------------
1 file changed, 6 insertions(+), 28 deletions(-)
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -147,23 +147,12 @@
* Find irq with highest priority
*/
# open coded PTR_LA t1, cpu_mask_nr_tbl
-#if (_MIPS_SZPTR == 32)
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
# open coded la t1, cpu_mask_nr_tbl
lui t1, %hi(cpu_mask_nr_tbl)
addiu t1, %lo(cpu_mask_nr_tbl)
-
-#endif
-#if (_MIPS_SZPTR == 64)
- # open coded dla t1, cpu_mask_nr_tbl
- .set push
- .set noat
- lui t1, %highest(cpu_mask_nr_tbl)
- lui AT, %hi(cpu_mask_nr_tbl)
- daddiu t1, t1, %higher(cpu_mask_nr_tbl)
- daddiu AT, AT, %lo(cpu_mask_nr_tbl)
- dsll t1, 32
- daddu t1, t1, AT
- .set pop
+#else
+#error GCC `-msym32' option required for 64-bit DECstation builds
#endif
1: lw t2,(t1)
nop
@@ -214,23 +203,12 @@
* Find irq with highest priority
*/
# open coded PTR_LA t1,asic_mask_nr_tbl
-#if (_MIPS_SZPTR == 32)
+#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
# open coded la t1, asic_mask_nr_tbl
lui t1, %hi(asic_mask_nr_tbl)
addiu t1, %lo(asic_mask_nr_tbl)
-
-#endif
-#if (_MIPS_SZPTR == 64)
- # open coded dla t1, asic_mask_nr_tbl
- .set push
- .set noat
- lui t1, %highest(asic_mask_nr_tbl)
- lui AT, %hi(asic_mask_nr_tbl)
- daddiu t1, t1, %higher(asic_mask_nr_tbl)
- daddiu AT, AT, %lo(asic_mask_nr_tbl)
- dsll t1, 32
- daddu t1, t1, AT
- .set pop
+#else
+#error GCC `-msym32' option required for 64-bit DECstation builds
#endif
2: lw t2,(t1)
nop
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yoshihiro Shimoda <[email protected]>
commit aca5b9ebd096039657417c321a9252c696b359c2 upstream.
According to the gadget.h, a "complete" function will always be called
with interrupts disabled. However, sometimes usb3_request_done() function
is called with interrupts enabled. So, this function should be held
by spin_lock_irqsave() to disable interruption. Also, this driver has
to call spin_unlock() to avoid spinlock recursion by this driver before
calling usb_gadget_giveback_request().
Reported-by: Kazuya Mizuguchi <[email protected]>
Tested-by: Kazuya Mizuguchi <[email protected]>
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/udc/renesas_usb3.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -685,21 +685,32 @@ static struct renesas_usb3_request *usb3
return usb3_req;
}
-static void usb3_request_done(struct renesas_usb3_ep *usb3_ep,
- struct renesas_usb3_request *usb3_req, int status)
+static void __usb3_request_done(struct renesas_usb3_ep *usb3_ep,
+ struct renesas_usb3_request *usb3_req,
+ int status)
{
struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
- unsigned long flags;
dev_dbg(usb3_to_dev(usb3), "giveback: ep%2d, %u, %u, %d\n",
usb3_ep->num, usb3_req->req.length, usb3_req->req.actual,
status);
usb3_req->req.status = status;
- spin_lock_irqsave(&usb3->lock, flags);
usb3_ep->started = false;
list_del_init(&usb3_req->queue);
- spin_unlock_irqrestore(&usb3->lock, flags);
+ spin_unlock(&usb3->lock);
usb_gadget_giveback_request(&usb3_ep->ep, &usb3_req->req);
+ spin_lock(&usb3->lock);
+}
+
+static void usb3_request_done(struct renesas_usb3_ep *usb3_ep,
+ struct renesas_usb3_request *usb3_req, int status)
+{
+ struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+ unsigned long flags;
+
+ spin_lock_irqsave(&usb3->lock, flags);
+ __usb3_request_done(usb3_ep, usb3_req, status);
+ spin_unlock_irqrestore(&usb3->lock, flags);
}
static void usb3_irq_epc_pipe0_status_end(struct renesas_usb3 *usb3)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann <[email protected]>
commit 105967ad68d2eb1a041bc041f9cf96af2a653b65 upstream.
gcc-7 points out an older regression:
drivers/staging/iio/resolver/ad2s1210.c: In function 'ad2s1210_read_raw':
drivers/staging/iio/resolver/ad2s1210.c:515:42: error: '<<' in boolean context, did you mean '<' ? [-Werror=int-in-bool-context]
The original code had 'unsigned short' here, but incorrectly got
converted to 'bool'. This reverts the regression and uses a normal
type instead.
Fixes: 29148543c521 ("staging:iio:resolver:ad2s1210 minimal chan spec conversion.")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/iio/resolver/ad2s1210.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -472,7 +472,7 @@ static int ad2s1210_read_raw(struct iio_
long m)
{
struct ad2s1210_state *st = iio_priv(indio_dev);
- bool negative;
+ u16 negative;
int ret = 0;
u16 pos;
s16 vel;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yoshihiro Shimoda <[email protected]>
commit 2acecd58969897795cf015c9057ebd349a3fda8a upstream.
The latest HW manual (Rev.0.55) shows us this UGCTRL2.VBUSSEL bit.
If the bit sets to 1, the VBUS drive is controlled by phy related
registers (called "UCOM Registers" on the manual). Since R-Car Gen3
environment will control VBUS by phy-rcar-gen3-usb2 driver,
the UGCTRL2.VBUSSEL bit should be set to 1. So, this patch fixes
the register's value. Otherwise, even if the ID pin indicates to
peripheral, the R-Car will output USBn_PWEN to 1 when a host driver
is running.
Fixes: de18757e272d ("usb: renesas_usbhs: add R-Car Gen3 power control"
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/renesas_usbhs/rcar3.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/usb/renesas_usbhs/rcar3.c
+++ b/drivers/usb/renesas_usbhs/rcar3.c
@@ -20,9 +20,13 @@
/* Low Power Status register (LPSTS) */
#define LPSTS_SUSPM 0x4000
-/* USB General control register 2 (UGCTRL2), bit[31:6] should be 0 */
+/*
+ * USB General control register 2 (UGCTRL2)
+ * Remarks: bit[31:11] and bit[9:6] should be 0
+ */
#define UGCTRL2_RESERVED_3 0x00000001 /* bit[3:0] should be B'0001 */
#define UGCTRL2_USB0SEL_OTG 0x00000030
+#define UGCTRL2_VBUSSEL 0x00000400
static void usbhs_write32(struct usbhs_priv *priv, u32 reg, u32 data)
{
@@ -34,7 +38,8 @@ static int usbhs_rcar3_power_ctrl(struct
{
struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
- usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 | UGCTRL2_USB0SEL_OTG);
+ usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 | UGCTRL2_USB0SEL_OTG |
+ UGCTRL2_VBUSSEL);
if (enable) {
usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai-Heng Feng <[email protected]>
commit 7496cfe5431f21da5d27a8388c326397e3f0a5db upstream.
Moshi USB to Ethernet Adapter internally uses a Genesys Logic hub to
connect to Realtek r8153.
The Realtek r8153 ethernet does not work on the internal hub, no-lpm quirk
can make it work.
Since another r8153 dongle at my hand does not have the issue, so add
the quirk to the Genesys Logic hub instead.
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -150,6 +150,9 @@ static const struct usb_device_id usb_qu
/* appletouch */
{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */
+ { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM },
+
/* Avision AV600U */
{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <[email protected]>
commit 94c43b9897abf4ea366ed4dba027494e080c7050 upstream.
Some buggy USB disk adapters disconnect and reconnect multiple times
during the enumeration procedure. This may lead to a device
connecting at full speed instead of high speed, because when the USB
stack sees that a device isn't able to enumerate at high speed, it
tries to hand the connection over to a full-speed companion
controller.
The logic for doing this is careful to check that the device is still
connected. But this check is inadequate if the device disconnects and
reconnects before the check is done. The symptom is that a device
works, but much more slowly than it is capable of operating.
The situation was made worse recently by commit 22547c4cc4fe ("usb:
hub: Wait for connection to be reestablished after port reset"), which
increases the delay following a reset before a disconnect is
recognized, thus giving the device more time to reconnect.
This patch makes the check more robust. If the device was
disconnected at any time during enumeration, we will now skip the
full-speed handover.
Signed-off-by: Alan Stern <[email protected]>
Reported-and-tested-by: Zdenek Kabelac <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hub.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4728,7 +4728,8 @@ hub_power_remaining(struct usb_hub *hub)
static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
u16 portchange)
{
- int status, i;
+ int status = -ENODEV;
+ int i;
unsigned unit_load;
struct usb_device *hdev = hub->hdev;
struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
@@ -4932,9 +4933,10 @@ loop:
done:
hub_port_disable(hub, port1, 1);
- if (hcd->driver->relinquish_port && !hub->hdev->parent)
- hcd->driver->relinquish_port(hcd, port1);
-
+ if (hcd->driver->relinquish_port && !hub->hdev->parent) {
+ if (status != -ENOTCONN && status != -ENODEV)
+ hcd->driver->relinquish_port(hcd, port1);
+ }
}
/* Handle physical or logical connection change events.
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bin Liu <[email protected]>
commit 2eac13624364db5b5e1666ae0bb3a4d36bc56b6e upstream.
While unlink an urb, if the urb has been programmed in the controller,
the controller driver might do some hw related actions to tear down the
urb.
Currently usb_hcd_flush_endpoint() passes each urb from the head of the
endpoint's urb_list to the controller driver, which could make the
controller driver think each urb has been programmed and take the
unnecessary actions for each urb.
This patch changes the behavior in usb_hcd_flush_endpoint() to pass the
urbs from the tail of the list, to avoid any unnecessary actions in an
controller driver.
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Bin Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hcd.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1877,7 +1877,7 @@ void usb_hcd_flush_endpoint(struct usb_d
/* No more submits can occur */
spin_lock_irq(&hcd_urb_list_lock);
rescan:
- list_for_each_entry (urb, &ep->urb_list, urb_list) {
+ list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) {
int is_in;
if (urb->unlinked)
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Swanson <[email protected]>
commit 89f23d51defcb94a5026d4b5da13faf4e1150a6f upstream.
Similar to commit d595259fbb7a ("usb-storage: Add ignore-residue quirk for
Initio INIC-3619") for INIC-3169 in unusual_devs.h but INIC-3069 already
present in unusual_uas.h. Both in same controller IC family.
Issue is that MakeMKV fails during key exchange with installed bluray drive
with following error:
002004:0000 Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED'
occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:0'
Signed-off-by: Alan Swanson <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/unusual_uas.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -124,9 +124,9 @@ UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x99
/* Reported-by: Benjamin Tissoires <[email protected]> */
UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
"Initio Corporation",
- "",
+ "INIC-3069",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
- US_FL_NO_ATA_1X),
+ US_FL_NO_ATA_1X | US_FL_IGNORE_RESIDUE),
/* Reported-by: Tom Arild Naess <[email protected]> */
UNUSUAL_DEV(0x152d, 0x0539, 0x0000, 0x9999,
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ian Abbott <[email protected]>
commit cef988642cdac44e910a27cb6e8166c96f86a0df upstream.
Comedi's read and write file operation handlers (`comedi_read()` and
`comedi_write()`) currently call `copy_to_user()` or `copy_from_user()`
whilst in the `TASK_INTERRUPTIBLE` state, which falls foul of the
`might_fault()` checks when enabled. Fix it by setting the current task
state back to `TASK_RUNNING` a bit earlier before calling these
functions.
Reported-by: Piotr Gregor <[email protected]>
Signed-off-by: Ian Abbott <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/comedi_fops.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -2385,6 +2385,7 @@ static ssize_t comedi_write(struct file
continue;
}
+ set_current_state(TASK_RUNNING);
wp = async->buf_write_ptr;
n1 = min(n, async->prealloc_bufsz - wp);
n2 = n - n1;
@@ -2517,6 +2518,8 @@ static ssize_t comedi_read(struct file *
}
continue;
}
+
+ set_current_state(TASK_RUNNING);
rp = async->buf_read_ptr;
n1 = min(n, async->prealloc_bufsz - rp);
n2 = n - n1;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Akinobu Mita <[email protected]>
commit a3507e48d3f99a93a3056a34a5365f310434570f upstream.
The TSL2563 driver provides three iio channels, two of which are raw ADC
channels (channel 0 and channel 1) in the device and the remaining one
is calculated by the two. The ADC channel 0 only supports programmable
interrupt with threshold settings and this driver supports the event but
the generated event code does not contain the corresponding iio channel
type.
This is going to change userspace ABI. Hopefully fixing this to be
what it should always have been won't break any userspace code.
Cc: Jonathan Cameron <[email protected]>
Signed-off-by: Akinobu Mita <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/light/tsl2563.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -626,7 +626,7 @@ static irqreturn_t tsl2563_event_handler
struct tsl2563_chip *chip = iio_priv(dev_info);
iio_push_event(dev_info,
- IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
+ IIO_UNMOD_EVENT_CODE(IIO_INTENSITY,
0,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_EITHER),
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Neil Armstrong <[email protected]>
commit 34e61801a3b9df74b69f0e359d64a197a77dd6ac upstream.
GPIODV_18 entry was missing in the original driver push.
Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC")
Signed-off-by: Neil Armstrong <[email protected]>
Reviewed-by: Jerome Brunet <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -85,6 +85,7 @@ static const struct pinctrl_pin_desc mes
MESON_PIN(GPIODV_15, EE_OFF),
MESON_PIN(GPIODV_16, EE_OFF),
MESON_PIN(GPIODV_17, EE_OFF),
+ MESON_PIN(GPIODV_18, EE_OFF),
MESON_PIN(GPIODV_19, EE_OFF),
MESON_PIN(GPIODV_20, EE_OFF),
MESON_PIN(GPIODV_21, EE_OFF),
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masahiro Yamada <[email protected]>
commit 9592bc256d50481dfcdba93890e576a728fb373c upstream.
The pingroups dump of debugfs hits WARN_ON() in pinctrl_groups_show().
Filling non-existing ports with '-1' turned out a bad idea.
Fixes: 70f2f9c4cf25 ("pinctrl: uniphier: add UniPhier PH1-LD11 pinctrl driver")
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c | 364 ++++++++++++-----------
1 file changed, 192 insertions(+), 172 deletions(-)
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c
@@ -508,57 +508,71 @@ static const unsigned usb1_pins[] = {48,
static const int usb1_muxvals[] = {0, 0};
static const unsigned usb2_pins[] = {50, 51};
static const int usb2_muxvals[] = {0, 0};
-static const unsigned port_range_pins[] = {
+static const unsigned port_range0_pins[] = {
159, 160, 161, 162, 163, 164, 165, 166, /* PORT0x */
0, 1, 2, 3, 4, 5, 6, 7, /* PORT1x */
8, 9, 10, 11, 12, 13, 14, 15, /* PORT2x */
- 16, 17, 18, -1, -1, -1, -1, -1, /* PORT3x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT4x */
- -1, -1, -1, 46, 47, 48, 49, 50, /* PORT5x */
- 51, -1, -1, 54, 55, 56, 57, 58, /* PORT6x */
+ 16, 17, 18, /* PORT30-32 */
+};
+static const int port_range0_muxvals[] = {
+ 15, 15, 15, 15, 15, 15, 15, 15, /* PORT0x */
+ 15, 15, 15, 15, 15, 15, 15, 15, /* PORT1x */
+ 15, 15, 15, 15, 15, 15, 15, 15, /* PORT2x */
+ 15, 15, 15, /* PORT30-32 */
+};
+static const unsigned port_range1_pins[] = {
+ 46, 47, 48, 49, 50, /* PORT53-57 */
+ 51, /* PORT60 */
+};
+static const int port_range1_muxvals[] = {
+ 15, 15, 15, 15, 15, /* PORT53-57 */
+ 15, /* PORT60 */
+};
+static const unsigned port_range2_pins[] = {
+ 54, 55, 56, 57, 58, /* PORT63-67 */
59, 60, 69, 70, 71, 72, 73, 74, /* PORT7x */
75, 76, 77, 78, 79, 80, 81, 82, /* PORT8x */
83, 84, 85, 86, 87, 88, 89, 90, /* PORT9x */
91, 92, 93, 94, 95, 96, 97, 98, /* PORT10x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT11x */
- 99, 100, 101, 102, 103, 104, 105, 106, /* PORT12x */
- 107, 108, 109, 110, 111, 112, 113, 114, /* PORT13x */
- 115, 116, 117, 118, 119, 120, 121, 122, /* PORT14x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT15x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT16x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT17x */
- 61, 62, 63, 64, 65, 66, 67, 68, /* PORT18x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT19x */
- 123, 124, 125, 126, 127, 128, 129, 130, /* PORT20x */
- 131, 132, 133, 134, 135, 136, 137, 138, /* PORT21x */
- 139, 140, 141, 142, -1, -1, -1, -1, /* PORT22x */
- 147, 148, 149, 150, 151, 152, 153, 154, /* PORT23x */
- 155, 156, 157, 143, 144, 145, 146, 158, /* PORT24x */
};
-static const int port_range_muxvals[] = {
- 15, 15, 15, 15, 15, 15, 15, 15, /* PORT0x */
- 15, 15, 15, 15, 15, 15, 15, 15, /* PORT1x */
- 15, 15, 15, 15, 15, 15, 15, 15, /* PORT2x */
- 15, 15, 15, -1, -1, -1, -1, -1, /* PORT3x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT4x */
- -1, -1, -1, 15, 15, 15, 15, 15, /* PORT5x */
- 15, -1, -1, 15, 15, 15, 15, 15, /* PORT6x */
+static const int port_range2_muxvals[] = {
+ 15, 15, 15, 15, 15, /* PORT63-67 */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT7x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT8x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT9x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT10x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT11x */
+};
+static const unsigned port_range3_pins[] = {
+ 99, 100, 101, 102, 103, 104, 105, 106, /* PORT12x */
+ 107, 108, 109, 110, 111, 112, 113, 114, /* PORT13x */
+ 115, 116, 117, 118, 119, 120, 121, 122, /* PORT14x */
+};
+static const int port_range3_muxvals[] = {
15, 15, 15, 15, 15, 15, 15, 15, /* PORT12x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT13x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT14x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT15x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT16x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT17x */
+};
+static const unsigned port_range4_pins[] = {
+ 61, 62, 63, 64, 65, 66, 67, 68, /* PORT18x */
+};
+static const int port_range4_muxvals[] = {
15, 15, 15, 15, 15, 15, 15, 15, /* PORT18x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT19x */
+};
+static const unsigned port_range5_pins[] = {
+ 123, 124, 125, 126, 127, 128, 129, 130, /* PORT20x */
+ 131, 132, 133, 134, 135, 136, 137, 138, /* PORT21x */
+ 139, 140, 141, 142, /* PORT220-223 */
+};
+static const int port_range5_muxvals[] = {
15, 15, 15, 15, 15, 15, 15, 15, /* PORT20x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT21x */
- 15, 15, 15, 15, -1, -1, -1, -1, /* PORT22x */
+ 15, 15, 15, 15, /* PORT220-223 */
+};
+static const unsigned port_range6_pins[] = {
+ 147, 148, 149, 150, 151, 152, 153, 154, /* PORT23x */
+ 155, 156, 157, 143, 144, 145, 146, 158, /* PORT24x */
+};
+static const int port_range6_muxvals[] = {
15, 15, 15, 15, 15, 15, 15, 15, /* PORT23x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT24x */
};
@@ -607,147 +621,153 @@ static const struct uniphier_pinctrl_gro
UNIPHIER_PINCTRL_GROUP(usb0),
UNIPHIER_PINCTRL_GROUP(usb1),
UNIPHIER_PINCTRL_GROUP(usb2),
- UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range),
+ UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range0),
+ UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range1),
+ UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range2),
+ UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range3),
+ UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range4),
+ UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range5),
+ UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range6),
UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_IRQ(xirq),
UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_IRQ(xirq_alternatives),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port00, port_range, 0),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port01, port_range, 1),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port02, port_range, 2),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port03, port_range, 3),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port04, port_range, 4),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port05, port_range, 5),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port06, port_range, 6),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port07, port_range, 7),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port10, port_range, 8),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port11, port_range, 9),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port12, port_range, 10),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port13, port_range, 11),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port14, port_range, 12),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port15, port_range, 13),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port16, port_range, 14),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port17, port_range, 15),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port20, port_range, 16),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port21, port_range, 17),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port22, port_range, 18),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port23, port_range, 19),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port24, port_range, 20),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port25, port_range, 21),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port26, port_range, 22),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port27, port_range, 23),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port30, port_range, 24),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port31, port_range, 25),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port32, port_range, 26),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port53, port_range, 43),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port54, port_range, 44),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port55, port_range, 45),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port56, port_range, 46),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port57, port_range, 47),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port60, port_range, 48),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port63, port_range, 51),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port64, port_range, 52),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port65, port_range, 53),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port66, port_range, 54),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port67, port_range, 55),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port70, port_range, 56),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port71, port_range, 57),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port72, port_range, 58),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port73, port_range, 59),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port74, port_range, 60),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port75, port_range, 61),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port76, port_range, 62),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port77, port_range, 63),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port80, port_range, 64),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port81, port_range, 65),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port82, port_range, 66),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port83, port_range, 67),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port84, port_range, 68),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port85, port_range, 69),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port86, port_range, 70),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port87, port_range, 71),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port90, port_range, 72),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port91, port_range, 73),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port92, port_range, 74),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port93, port_range, 75),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port94, port_range, 76),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port95, port_range, 77),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port96, port_range, 78),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port97, port_range, 79),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port100, port_range, 80),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port101, port_range, 81),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port102, port_range, 82),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port103, port_range, 83),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port104, port_range, 84),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port105, port_range, 85),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port106, port_range, 86),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port107, port_range, 87),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port120, port_range, 96),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port121, port_range, 97),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port122, port_range, 98),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port123, port_range, 99),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port124, port_range, 100),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port125, port_range, 101),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port126, port_range, 102),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port127, port_range, 103),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port130, port_range, 104),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port131, port_range, 105),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port132, port_range, 106),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port133, port_range, 107),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port134, port_range, 108),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port135, port_range, 109),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port136, port_range, 110),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port137, port_range, 111),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port140, port_range, 112),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port141, port_range, 113),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port142, port_range, 114),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port143, port_range, 115),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port144, port_range, 116),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port145, port_range, 117),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port146, port_range, 118),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port147, port_range, 119),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port180, port_range, 144),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port181, port_range, 145),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port182, port_range, 146),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port183, port_range, 147),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port184, port_range, 148),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port185, port_range, 149),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port186, port_range, 150),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port187, port_range, 151),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port200, port_range, 160),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port201, port_range, 161),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port202, port_range, 162),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port203, port_range, 163),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port204, port_range, 164),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port205, port_range, 165),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port206, port_range, 166),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port207, port_range, 167),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port210, port_range, 168),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port211, port_range, 169),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port212, port_range, 170),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port213, port_range, 171),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port214, port_range, 172),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port215, port_range, 173),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port216, port_range, 174),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port217, port_range, 175),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port220, port_range, 176),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port221, port_range, 177),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port222, port_range, 178),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port223, port_range, 179),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port230, port_range, 184),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port231, port_range, 185),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port232, port_range, 186),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port233, port_range, 187),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port234, port_range, 188),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port235, port_range, 189),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port236, port_range, 190),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port237, port_range, 191),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port240, port_range, 192),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port241, port_range, 193),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port242, port_range, 194),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port243, port_range, 195),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port244, port_range, 196),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port245, port_range, 197),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port246, port_range, 198),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port247, port_range, 199),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port00, port_range0, 0),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port01, port_range0, 1),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port02, port_range0, 2),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port03, port_range0, 3),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port04, port_range0, 4),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port05, port_range0, 5),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port06, port_range0, 6),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port07, port_range0, 7),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port10, port_range0, 8),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port11, port_range0, 9),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port12, port_range0, 10),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port13, port_range0, 11),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port14, port_range0, 12),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port15, port_range0, 13),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port16, port_range0, 14),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port17, port_range0, 15),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port20, port_range0, 16),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port21, port_range0, 17),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port22, port_range0, 18),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port23, port_range0, 19),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port24, port_range0, 20),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port25, port_range0, 21),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port26, port_range0, 22),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port27, port_range0, 23),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port30, port_range0, 24),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port31, port_range0, 25),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port32, port_range0, 26),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port53, port_range1, 0),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port54, port_range1, 1),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port55, port_range1, 2),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port56, port_range1, 3),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port57, port_range1, 4),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port60, port_range1, 5),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port63, port_range2, 0),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port64, port_range2, 1),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port65, port_range2, 2),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port66, port_range2, 3),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port67, port_range2, 4),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port70, port_range2, 5),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port71, port_range2, 6),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port72, port_range2, 7),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port73, port_range2, 8),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port74, port_range2, 9),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port75, port_range2, 10),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port76, port_range2, 11),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port77, port_range2, 12),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port80, port_range2, 13),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port81, port_range2, 14),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port82, port_range2, 15),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port83, port_range2, 16),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port84, port_range2, 17),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port85, port_range2, 18),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port86, port_range2, 19),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port87, port_range2, 20),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port90, port_range2, 21),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port91, port_range2, 22),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port92, port_range2, 23),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port93, port_range2, 24),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port94, port_range2, 25),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port95, port_range2, 26),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port96, port_range2, 27),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port97, port_range2, 28),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port100, port_range2, 29),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port101, port_range2, 30),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port102, port_range2, 31),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port103, port_range2, 32),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port104, port_range2, 33),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port105, port_range2, 34),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port106, port_range2, 35),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port107, port_range2, 36),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port120, port_range3, 0),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port121, port_range3, 1),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port122, port_range3, 2),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port123, port_range3, 3),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port124, port_range3, 4),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port125, port_range3, 5),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port126, port_range3, 6),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port127, port_range3, 7),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port130, port_range3, 8),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port131, port_range3, 9),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port132, port_range3, 10),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port133, port_range3, 11),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port134, port_range3, 12),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port135, port_range3, 13),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port136, port_range3, 14),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port137, port_range3, 15),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port140, port_range3, 16),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port141, port_range3, 17),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port142, port_range3, 18),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port143, port_range3, 19),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port144, port_range3, 20),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port145, port_range3, 21),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port146, port_range3, 22),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port147, port_range3, 23),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port180, port_range4, 0),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port181, port_range4, 1),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port182, port_range4, 2),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port183, port_range4, 3),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port184, port_range4, 4),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port185, port_range4, 5),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port186, port_range4, 6),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port187, port_range4, 7),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port200, port_range5, 0),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port201, port_range5, 1),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port202, port_range5, 2),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port203, port_range5, 3),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port204, port_range5, 4),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port205, port_range5, 5),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port206, port_range5, 6),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port207, port_range5, 7),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port210, port_range5, 8),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port211, port_range5, 9),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port212, port_range5, 10),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port213, port_range5, 11),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port214, port_range5, 12),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port215, port_range5, 13),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port216, port_range5, 14),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port217, port_range5, 15),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port220, port_range5, 16),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port221, port_range5, 17),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port222, port_range5, 18),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port223, port_range5, 19),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port230, port_range6, 0),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port231, port_range6, 1),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port232, port_range6, 2),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port233, port_range6, 3),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port234, port_range6, 4),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port235, port_range6, 5),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port236, port_range6, 6),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port237, port_range6, 7),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port240, port_range6, 8),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port241, port_range6, 9),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port242, port_range6, 10),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port243, port_range6, 11),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port244, port_range6, 12),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port245, port_range6, 13),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port246, port_range6, 14),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port247, port_range6, 15),
UNIPHIER_PINCTRL_GROUP_SINGLE(xirq0, xirq, 0),
UNIPHIER_PINCTRL_GROUP_SINGLE(xirq1, xirq, 1),
UNIPHIER_PINCTRL_GROUP_SINGLE(xirq2, xirq, 2),
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masahiro Yamada <[email protected]>
commit 1bd303dc04c3f744474e77c153575087b657f7e1 upstream.
The pingroups dump of debugfs hits WARN_ON() in pinctrl_groups_show().
Filling non-existing ports with '-1' turned out a bad idea.
Fixes: 336306ee1f2d ("pinctrl: uniphier: add UniPhier PH1-LD20 pinctrl driver")
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c | 383 +++++++++++------------
1 file changed, 194 insertions(+), 189 deletions(-)
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c
@@ -597,7 +597,7 @@ static const unsigned usb2_pins[] = {50,
static const int usb2_muxvals[] = {0, 0};
static const unsigned usb3_pins[] = {52, 53};
static const int usb3_muxvals[] = {0, 0};
-static const unsigned port_range_pins[] = {
+static const unsigned port_range0_pins[] = {
168, 169, 170, 171, 172, 173, 174, 175, /* PORT0x */
0, 1, 2, 3, 4, 5, 6, 7, /* PORT1x */
8, 9, 10, 11, 12, 13, 14, 15, /* PORT2x */
@@ -609,23 +609,8 @@ static const unsigned port_range_pins[]
75, 76, 77, 78, 79, 80, 81, 82, /* PORT8x */
83, 84, 85, 86, 87, 88, 89, 90, /* PORT9x */
91, 92, 93, 94, 95, 96, 97, 98, /* PORT10x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT11x */
- 99, 100, 101, 102, 103, 104, 105, 106, /* PORT12x */
- 107, 108, 109, 110, 111, 112, 113, 114, /* PORT13x */
- 115, 116, 117, 118, 119, 120, 121, 122, /* PORT14x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT15x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT16x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT17x */
- 61, 62, 63, 64, 65, 66, 67, 68, /* PORT18x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT19x */
- 123, 124, 125, 126, 127, 128, 129, 130, /* PORT20x */
- 131, 132, 133, 134, 135, 136, 137, 138, /* PORT21x */
- 139, 140, 141, 142, 143, 144, 145, 146, /* PORT22x */
- 147, 148, 149, 150, 151, 152, 153, 154, /* PORT23x */
- 155, 156, 157, 158, 159, 160, 161, 162, /* PORT24x */
- 163, 164, 165, 166, 167, /* PORT25x */
};
-static const int port_range_muxvals[] = {
+static const int port_range0_muxvals[] = {
15, 15, 15, 15, 15, 15, 15, 15, /* PORT0x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT1x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT2x */
@@ -637,21 +622,38 @@ static const int port_range_muxvals[] =
15, 15, 15, 15, 15, 15, 15, 15, /* PORT8x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT9x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT10x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT11x */
+};
+static const unsigned port_range1_pins[] = {
+ 99, 100, 101, 102, 103, 104, 105, 106, /* PORT12x */
+ 107, 108, 109, 110, 111, 112, 113, 114, /* PORT13x */
+ 115, 116, 117, 118, 119, 120, 121, 122, /* PORT14x */
+};
+static const int port_range1_muxvals[] = {
15, 15, 15, 15, 15, 15, 15, 15, /* PORT12x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT13x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT14x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT15x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT16x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT17x */
+};
+static const unsigned port_range2_pins[] = {
+ 61, 62, 63, 64, 65, 66, 67, 68, /* PORT18x */
+};
+static const int port_range2_muxvals[] = {
15, 15, 15, 15, 15, 15, 15, 15, /* PORT18x */
- -1, -1, -1, -1, -1, -1, -1, -1, /* PORT19x */
+};
+static const unsigned port_range3_pins[] = {
+ 123, 124, 125, 126, 127, 128, 129, 130, /* PORT20x */
+ 131, 132, 133, 134, 135, 136, 137, 138, /* PORT21x */
+ 139, 140, 141, 142, 143, 144, 145, 146, /* PORT22x */
+ 147, 148, 149, 150, 151, 152, 153, 154, /* PORT23x */
+ 155, 156, 157, 158, 159, 160, 161, 162, /* PORT24x */
+ 163, 164, 165, 166, 167, /* PORT250-254 */
+};
+static const int port_range3_muxvals[] = {
15, 15, 15, 15, 15, 15, 15, 15, /* PORT20x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT21x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT22x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT23x */
15, 15, 15, 15, 15, 15, 15, 15, /* PORT24x */
- 15, 15, 15, 15, 15, /* PORT25x */
+ 15, 15, 15, 15, 15, /* PORT250-254 */
};
static const unsigned xirq_pins[] = {
149, 150, 151, 152, 153, 154, 155, 156, /* XIRQ0-7 */
@@ -695,174 +697,177 @@ static const struct uniphier_pinctrl_gro
UNIPHIER_PINCTRL_GROUP(usb1),
UNIPHIER_PINCTRL_GROUP(usb2),
UNIPHIER_PINCTRL_GROUP(usb3),
- UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range),
+ UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range0),
+ UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range1),
+ UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range2),
+ UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_PORT(port_range3),
UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_IRQ(xirq),
UNIPHIER_PINCTRL_GROUP_GPIO_RANGE_IRQ(xirq_alternatives),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port00, port_range, 0),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port01, port_range, 1),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port02, port_range, 2),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port03, port_range, 3),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port04, port_range, 4),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port05, port_range, 5),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port06, port_range, 6),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port07, port_range, 7),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port10, port_range, 8),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port11, port_range, 9),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port12, port_range, 10),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port13, port_range, 11),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port14, port_range, 12),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port15, port_range, 13),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port16, port_range, 14),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port17, port_range, 15),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port20, port_range, 16),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port21, port_range, 17),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port22, port_range, 18),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port23, port_range, 19),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port24, port_range, 20),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port25, port_range, 21),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port26, port_range, 22),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port27, port_range, 23),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port30, port_range, 24),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port31, port_range, 25),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port32, port_range, 26),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port33, port_range, 27),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port34, port_range, 28),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port35, port_range, 29),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port36, port_range, 30),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port37, port_range, 31),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port40, port_range, 32),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port41, port_range, 33),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port42, port_range, 34),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port43, port_range, 35),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port44, port_range, 36),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port45, port_range, 37),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port46, port_range, 38),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port47, port_range, 39),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port50, port_range, 40),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port51, port_range, 41),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port52, port_range, 42),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port53, port_range, 43),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port54, port_range, 44),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port55, port_range, 45),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port56, port_range, 46),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port57, port_range, 47),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port60, port_range, 48),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port61, port_range, 49),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port62, port_range, 50),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port63, port_range, 51),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port64, port_range, 52),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port65, port_range, 53),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port66, port_range, 54),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port67, port_range, 55),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port70, port_range, 56),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port71, port_range, 57),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port72, port_range, 58),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port73, port_range, 59),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port74, port_range, 60),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port75, port_range, 61),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port76, port_range, 62),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port77, port_range, 63),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port80, port_range, 64),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port81, port_range, 65),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port82, port_range, 66),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port83, port_range, 67),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port84, port_range, 68),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port85, port_range, 69),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port86, port_range, 70),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port87, port_range, 71),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port90, port_range, 72),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port91, port_range, 73),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port92, port_range, 74),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port93, port_range, 75),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port94, port_range, 76),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port95, port_range, 77),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port96, port_range, 78),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port97, port_range, 79),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port100, port_range, 80),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port101, port_range, 81),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port102, port_range, 82),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port103, port_range, 83),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port104, port_range, 84),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port105, port_range, 85),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port106, port_range, 86),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port107, port_range, 87),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port120, port_range, 96),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port121, port_range, 97),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port122, port_range, 98),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port123, port_range, 99),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port124, port_range, 100),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port125, port_range, 101),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port126, port_range, 102),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port127, port_range, 103),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port130, port_range, 104),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port131, port_range, 105),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port132, port_range, 106),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port133, port_range, 107),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port134, port_range, 108),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port135, port_range, 109),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port136, port_range, 110),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port137, port_range, 111),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port140, port_range, 112),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port141, port_range, 113),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port142, port_range, 114),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port143, port_range, 115),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port144, port_range, 116),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port145, port_range, 117),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port146, port_range, 118),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port147, port_range, 119),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port180, port_range, 144),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port181, port_range, 145),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port182, port_range, 146),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port183, port_range, 147),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port184, port_range, 148),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port185, port_range, 149),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port186, port_range, 150),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port187, port_range, 151),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port200, port_range, 160),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port201, port_range, 161),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port202, port_range, 162),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port203, port_range, 163),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port204, port_range, 164),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port205, port_range, 165),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port206, port_range, 166),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port207, port_range, 167),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port210, port_range, 168),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port211, port_range, 169),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port212, port_range, 170),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port213, port_range, 171),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port214, port_range, 172),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port215, port_range, 173),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port216, port_range, 174),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port217, port_range, 175),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port220, port_range, 176),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port221, port_range, 177),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port222, port_range, 178),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port223, port_range, 179),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port224, port_range, 180),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port225, port_range, 181),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port226, port_range, 182),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port227, port_range, 183),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port230, port_range, 184),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port231, port_range, 185),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port232, port_range, 186),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port233, port_range, 187),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port234, port_range, 188),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port235, port_range, 189),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port236, port_range, 190),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port237, port_range, 191),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port240, port_range, 192),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port241, port_range, 193),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port242, port_range, 194),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port243, port_range, 195),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port244, port_range, 196),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port245, port_range, 197),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port246, port_range, 198),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port247, port_range, 199),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port250, port_range, 200),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port251, port_range, 201),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port252, port_range, 202),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port253, port_range, 203),
- UNIPHIER_PINCTRL_GROUP_SINGLE(port254, port_range, 204),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port00, port_range0, 0),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port01, port_range0, 1),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port02, port_range0, 2),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port03, port_range0, 3),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port04, port_range0, 4),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port05, port_range0, 5),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port06, port_range0, 6),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port07, port_range0, 7),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port10, port_range0, 8),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port11, port_range0, 9),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port12, port_range0, 10),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port13, port_range0, 11),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port14, port_range0, 12),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port15, port_range0, 13),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port16, port_range0, 14),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port17, port_range0, 15),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port20, port_range0, 16),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port21, port_range0, 17),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port22, port_range0, 18),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port23, port_range0, 19),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port24, port_range0, 20),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port25, port_range0, 21),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port26, port_range0, 22),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port27, port_range0, 23),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port30, port_range0, 24),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port31, port_range0, 25),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port32, port_range0, 26),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port33, port_range0, 27),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port34, port_range0, 28),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port35, port_range0, 29),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port36, port_range0, 30),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port37, port_range0, 31),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port40, port_range0, 32),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port41, port_range0, 33),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port42, port_range0, 34),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port43, port_range0, 35),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port44, port_range0, 36),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port45, port_range0, 37),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port46, port_range0, 38),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port47, port_range0, 39),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port50, port_range0, 40),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port51, port_range0, 41),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port52, port_range0, 42),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port53, port_range0, 43),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port54, port_range0, 44),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port55, port_range0, 45),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port56, port_range0, 46),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port57, port_range0, 47),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port60, port_range0, 48),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port61, port_range0, 49),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port62, port_range0, 50),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port63, port_range0, 51),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port64, port_range0, 52),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port65, port_range0, 53),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port66, port_range0, 54),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port67, port_range0, 55),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port70, port_range0, 56),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port71, port_range0, 57),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port72, port_range0, 58),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port73, port_range0, 59),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port74, port_range0, 60),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port75, port_range0, 61),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port76, port_range0, 62),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port77, port_range0, 63),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port80, port_range0, 64),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port81, port_range0, 65),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port82, port_range0, 66),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port83, port_range0, 67),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port84, port_range0, 68),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port85, port_range0, 69),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port86, port_range0, 70),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port87, port_range0, 71),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port90, port_range0, 72),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port91, port_range0, 73),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port92, port_range0, 74),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port93, port_range0, 75),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port94, port_range0, 76),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port95, port_range0, 77),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port96, port_range0, 78),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port97, port_range0, 79),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port100, port_range0, 80),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port101, port_range0, 81),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port102, port_range0, 82),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port103, port_range0, 83),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port104, port_range0, 84),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port105, port_range0, 85),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port106, port_range0, 86),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port107, port_range0, 87),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port120, port_range1, 0),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port121, port_range1, 1),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port122, port_range1, 2),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port123, port_range1, 3),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port124, port_range1, 4),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port125, port_range1, 5),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port126, port_range1, 6),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port127, port_range1, 7),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port130, port_range1, 8),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port131, port_range1, 9),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port132, port_range1, 10),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port133, port_range1, 11),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port134, port_range1, 12),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port135, port_range1, 13),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port136, port_range1, 14),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port137, port_range1, 15),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port140, port_range1, 16),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port141, port_range1, 17),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port142, port_range1, 18),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port143, port_range1, 19),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port144, port_range1, 20),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port145, port_range1, 21),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port146, port_range1, 22),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port147, port_range1, 23),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port180, port_range2, 0),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port181, port_range2, 1),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port182, port_range2, 2),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port183, port_range2, 3),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port184, port_range2, 4),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port185, port_range2, 5),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port186, port_range2, 6),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port187, port_range2, 7),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port200, port_range3, 0),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port201, port_range3, 1),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port202, port_range3, 2),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port203, port_range3, 3),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port204, port_range3, 4),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port205, port_range3, 5),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port206, port_range3, 6),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port207, port_range3, 7),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port210, port_range3, 8),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port211, port_range3, 9),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port212, port_range3, 10),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port213, port_range3, 11),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port214, port_range3, 12),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port215, port_range3, 13),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port216, port_range3, 14),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port217, port_range3, 15),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port220, port_range3, 16),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port221, port_range3, 17),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port222, port_range3, 18),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port223, port_range3, 19),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port224, port_range3, 20),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port225, port_range3, 21),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port226, port_range3, 22),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port227, port_range3, 23),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port230, port_range3, 24),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port231, port_range3, 25),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port232, port_range3, 26),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port233, port_range3, 27),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port234, port_range3, 28),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port235, port_range3, 29),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port236, port_range3, 30),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port237, port_range3, 31),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port240, port_range3, 32),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port241, port_range3, 33),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port242, port_range3, 34),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port243, port_range3, 35),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port244, port_range3, 36),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port245, port_range3, 37),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port246, port_range3, 38),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port247, port_range3, 39),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port250, port_range3, 40),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port251, port_range3, 41),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port252, port_range3, 42),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port253, port_range3, 43),
+ UNIPHIER_PINCTRL_GROUP_SINGLE(port254, port_range3, 44),
UNIPHIER_PINCTRL_GROUP_SINGLE(xirq0, xirq, 0),
UNIPHIER_PINCTRL_GROUP_SINGLE(xirq1, xirq, 1),
UNIPHIER_PINCTRL_GROUP_SINGLE(xirq2, xirq, 2),
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Gleixner <[email protected]>
commit 3fa53ec2ed885b0aec3f0472e3b4a8a6f1cd748c upstream.
The irq chip callbacks irq_request/release_resources() have absolutely no
business with masking and unmasking the irq.
The core code unmasks the interrupt after complete setup and masks it
before invoking irq_release_resources().
The unmask is actually harmful as it happens before the interrupt is
completely initialized in __setup_irq().
Remove it.
Fixes: f6a8249f9e55 ("pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs")
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Sylwester Nawrocki <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Kukjin Kim <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Acked-by: Tomasz Figa <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/samsung/pinctrl-exynos.c | 4 ----
1 file changed, 4 deletions(-)
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -195,8 +195,6 @@ static int exynos_irq_request_resources(
spin_unlock_irqrestore(&bank->slock, flags);
- exynos_irq_unmask(irqd);
-
return 0;
}
@@ -217,8 +215,6 @@ static void exynos_irq_release_resources
shift = irqd->hwirq * bank_type->fld_width[PINCFG_TYPE_FUNC];
mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;
- exynos_irq_mask(irqd);
-
spin_lock_irqsave(&bank->slock, flags);
con = readl(d->virt_base + reg_con);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit 978d13d60c34818a41fc35962602bdfa5c03f214 upstream.
This patch fixes a bug associated with iscsit_reset_np_thread()
that can occur during parallel configfs rmdir of a single iscsi_np
used across multiple iscsi-target instances, that would result in
hung task(s) similar to below where configfs rmdir process context
was blocked indefinately waiting for iscsi_np->np_restart_comp
to finish:
[ 6726.112076] INFO: task dcp_proxy_node_:15550 blocked for more than 120 seconds.
[ 6726.119440] Tainted: G W O 4.1.26-3321 #2
[ 6726.125045] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 6726.132927] dcp_proxy_node_ D ffff8803f202bc88 0 15550 1 0x00000000
[ 6726.140058] ffff8803f202bc88 ffff88085c64d960 ffff88083b3b1ad0 ffff88087fffeb08
[ 6726.147593] ffff8803f202c000 7fffffffffffffff ffff88083f459c28 ffff88083b3b1ad0
[ 6726.155132] ffff88035373c100 ffff8803f202bca8 ffffffff8168ced2 ffff8803f202bcb8
[ 6726.162667] Call Trace:
[ 6726.165150] [<ffffffff8168ced2>] schedule+0x32/0x80
[ 6726.170156] [<ffffffff8168f5b4>] schedule_timeout+0x214/0x290
[ 6726.176030] [<ffffffff810caef2>] ? __send_signal+0x52/0x4a0
[ 6726.181728] [<ffffffff8168d7d6>] wait_for_completion+0x96/0x100
[ 6726.187774] [<ffffffff810e7c80>] ? wake_up_state+0x10/0x10
[ 6726.193395] [<ffffffffa035d6e2>] iscsit_reset_np_thread+0x62/0xe0 [iscsi_target_mod]
[ 6726.201278] [<ffffffffa0355d86>] iscsit_tpg_disable_portal_group+0x96/0x190 [iscsi_target_mod]
[ 6726.210033] [<ffffffffa0363f7f>] lio_target_tpg_store_enable+0x4f/0xc0 [iscsi_target_mod]
[ 6726.218351] [<ffffffff81260c5a>] configfs_write_file+0xaa/0x110
[ 6726.224392] [<ffffffff811ea364>] vfs_write+0xa4/0x1b0
[ 6726.229576] [<ffffffff811eb111>] SyS_write+0x41/0xb0
[ 6726.234659] [<ffffffff8169042e>] system_call_fastpath+0x12/0x71
It would happen because each iscsit_reset_np_thread() sets state
to ISCSI_NP_THREAD_RESET, sends SIGINT, and then blocks waiting
for completion on iscsi_np->np_restart_comp.
However, if iscsi_np was active processing a login request and
more than a single iscsit_reset_np_thread() caller to the same
iscsi_np was blocked on iscsi_np->np_restart_comp, iscsi_np
kthread process context in __iscsi_target_login_thread() would
flush pending signals and only perform a single completion of
np->np_restart_comp before going back to sleep within transport
specific iscsit_transport->iscsi_accept_np code.
To address this bug, add a iscsi_np->np_reset_count and update
__iscsi_target_login_thread() to keep completing np->np_restart_comp
until ->np_reset_count has reached zero.
Reported-by: Gary Guo <[email protected]>
Tested-by: Gary Guo <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target.c | 1 +
drivers/target/iscsi/iscsi_target_login.c | 7 +++++--
include/target/iscsi/iscsi_target_core.h | 1 +
3 files changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -418,6 +418,7 @@ int iscsit_reset_np_thread(
return 0;
}
np->np_thread_state = ISCSI_NP_THREAD_RESET;
+ atomic_inc(&np->np_reset_count);
if (np->np_thread) {
spin_unlock_bh(&np->np_thread_lock);
--- a/drivers/target/iscsi/iscsi_target_login.c
+++ b/drivers/target/iscsi/iscsi_target_login.c
@@ -1233,9 +1233,11 @@ static int __iscsi_target_login_thread(s
flush_signals(current);
spin_lock_bh(&np->np_thread_lock);
- if (np->np_thread_state == ISCSI_NP_THREAD_RESET) {
+ if (atomic_dec_if_positive(&np->np_reset_count) >= 0) {
np->np_thread_state = ISCSI_NP_THREAD_ACTIVE;
+ spin_unlock_bh(&np->np_thread_lock);
complete(&np->np_restart_comp);
+ return 1;
} else if (np->np_thread_state == ISCSI_NP_THREAD_SHUTDOWN) {
spin_unlock_bh(&np->np_thread_lock);
goto exit;
@@ -1268,7 +1270,8 @@ static int __iscsi_target_login_thread(s
goto exit;
} else if (rc < 0) {
spin_lock_bh(&np->np_thread_lock);
- if (np->np_thread_state == ISCSI_NP_THREAD_RESET) {
+ if (atomic_dec_if_positive(&np->np_reset_count) >= 0) {
+ np->np_thread_state = ISCSI_NP_THREAD_ACTIVE;
spin_unlock_bh(&np->np_thread_lock);
complete(&np->np_restart_comp);
iscsit_put_transport(conn->conn_transport);
--- a/include/target/iscsi/iscsi_target_core.h
+++ b/include/target/iscsi/iscsi_target_core.h
@@ -785,6 +785,7 @@ struct iscsi_np {
int np_sock_type;
enum np_thread_state_table np_thread_state;
bool enabled;
+ atomic_t np_reset_count;
enum iscsi_timer_flags_table np_login_timer_flags;
u32 np_exports;
enum np_flags_table np_flags;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Icenowy Zheng <[email protected]>
commit d81ece747d8727bb8b1cfc9a20dbe62f09a4e35a upstream.
The PH16 pin has a function with mux id 0x5, which is the DET pin of the
"sim" (smart card reader) IP block.
This function is missing in old versions of A10/A20 SoCs' datasheets and
user manuals, so it's also missing in the old drivers. The newest A10
Datasheet V1.70 and A20 Datasheet V1.41 contain this pin function, and
it's discovered during implementing R40 pinctrl driver.
Add it to the driver. As we now merged A20 pinctrl driver to the A10
one, we need to only fix the A10 driver now.
Fixes: f2821b1ca3a2 ("pinctrl: sunxi: Move Allwinner A10 pinctrl
driver to a driver of its own")
Signed-off-by: Icenowy Zheng <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c
@@ -811,6 +811,7 @@ static const struct sunxi_desc_pin sun4i
SUNXI_FUNCTION(0x2, "lcd1"), /* D16 */
SUNXI_FUNCTION(0x3, "pata"), /* ATAD12 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN6 */
+ SUNXI_FUNCTION(0x5, "sim"), /* DET */
SUNXI_FUNCTION_IRQ(0x6, 16), /* EINT16 */
SUNXI_FUNCTION(0x7, "csi1")), /* D16 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 17),
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Hellwig <[email protected]>
commit 8a9d6e964d318533ba3d2901ce153ba317c99a89 upstream.
The blocklayout code does not compile cleanly for a 32-bit sector_t,
and also has no reliable checks for devices sizes, which makes it
unsafe to use with a kernel that doesn't support large block devices.
Signed-off-by: Christoph Hellwig <[email protected]>
Reported-by: Arnd Bergmann <[email protected]>
Fixes: 5c83746a0cf2 ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/fs/nfs/Kconfig
+++ b/fs/nfs/Kconfig
@@ -121,6 +121,7 @@ config PNFS_FILE_LAYOUT
config PNFS_BLOCK
tristate
depends on NFS_V4_1 && BLK_DEV_DM
+ depends on 64BIT || LBDAF
default NFS_V4
config PNFS_OBJLAYOUT
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Varun Prakash <[email protected]>
commit ea8dc5b4cd2195ee582cae28afa4164c6dea1738 upstream.
On receiving text request iscsi-target allocates buffer for
payload in iscsit_handle_text_cmd() and assigns buffer pointer
to cmd->text_in_ptr, this buffer is currently freed in
iscsit_release_cmd(), if iscsi-target sets 'C' bit in text
response then it will receive another text request from the
initiator with ttt != 0xffffffff in this case iscsi-target
will find cmd using itt and call iscsit_setup_text_cmd()
which will set cmd->text_in_ptr to NULL without freeing
previously allocated buffer.
This patch fixes this issue by calling kfree(cmd->text_in_ptr)
in iscsit_setup_text_cmd() before assigning NULL to it.
For the first text request cmd->text_in_ptr is NULL as
cmd is memset to 0 in iscsit_allocate_cmd().
Signed-off-by: Varun Prakash <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -2177,6 +2177,7 @@ iscsit_setup_text_cmd(struct iscsi_conn
cmd->cmd_sn = be32_to_cpu(hdr->cmdsn);
cmd->exp_stat_sn = be32_to_cpu(hdr->exp_statsn);
cmd->data_direction = DMA_NONE;
+ kfree(cmd->text_in_ptr);
cmd->text_in_ptr = NULL;
return 0;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan-Gabriel Mirea <[email protected]>
commit d466d3c1217406b14b834335b5b4b33c0d45bd09 upstream.
In order to select the alternate voltage reference pair (VALTH/VALTL), the
right value for the REFSEL field in the ADCx_CFG register is "01", leading
to 0x800 as register mask. See section 8.2.6.4 in the reference manual[1].
[1] http://www.nxp.com/docs/en/reference-manual/VFXXXRM.pdf
Fixes: a775427632fd ("iio:adc:imx: add Freescale Vybrid vf610 adc driver")
Signed-off-by: Stefan-Gabriel Mirea <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/vf610_adc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/adc/vf610_adc.c
+++ b/drivers/iio/adc/vf610_adc.c
@@ -77,7 +77,7 @@
#define VF610_ADC_ADSTS_MASK 0x300
#define VF610_ADC_ADLPC_EN 0x80
#define VF610_ADC_ADHSC_EN 0x400
-#define VF610_ADC_REFSEL_VALT 0x100
+#define VF610_ADC_REFSEL_VALT 0x800
#define VF610_ADC_REFSEL_VBG 0x1000
#define VF610_ADC_ADTRG_HARD 0x2000
#define VF610_ADC_AVGS_8 0x4000
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sandeep Singh <[email protected]>
commit e788787ef4f9c24aafefc480a8da5f92b914e5e6 upstream.
Certain HP keyboards would keep inputting a character automatically which
is the wake-up key after S3 resume
On some AMD platforms USB host fails to respond (by holding resume-K) to
USB device (an HP keyboard) resume request within 1ms (TURSM) and ensures
that resume is signaled for at least 20 ms (TDRSMDN), which is defined in
USB 2.0 spec. The result is that the keyboard is out of function.
In SNPS USB design, the host responds to the resume request only after
system gets back to S0 and the host gets to functional after the internal
HW restore operation that is more than 1 second after the initial resume
request from the USB device.
As a workaround for specific keyboard ID(HP Keyboards), applying port reset
after resume when the keyboard is plugged in.
Signed-off-by: Sandeep Singh <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
cc: Nehal Shah <[email protected]>
Reviewed-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/quirks.c | 1 +
drivers/usb/host/pci-quirks.c | 17 ++++++++++++-----
2 files changed, 13 insertions(+), 5 deletions(-)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -252,6 +252,7 @@ static const struct usb_device_id usb_am
{ USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },
+ { USB_DEVICE(0x03f0, 0x2b4a), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Optical Mouse M90/M100 */
{ USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -98,6 +98,7 @@ enum amd_chipset_gen {
AMD_CHIPSET_HUDSON2,
AMD_CHIPSET_BOLTON,
AMD_CHIPSET_YANGTZE,
+ AMD_CHIPSET_TAISHAN,
AMD_CHIPSET_UNKNOWN,
};
@@ -141,6 +142,11 @@ static int amd_chipset_sb_type_init(stru
pinfo->sb_type.gen = AMD_CHIPSET_SB700;
else if (rev >= 0x40 && rev <= 0x4f)
pinfo->sb_type.gen = AMD_CHIPSET_SB800;
+ }
+ pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ 0x145c, NULL);
+ if (pinfo->smbus_dev) {
+ pinfo->sb_type.gen = AMD_CHIPSET_TAISHAN;
} else {
pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
@@ -260,11 +266,12 @@ int usb_hcd_amd_remote_wakeup_quirk(stru
{
/* Make sure amd chipset type has already been initialized */
usb_amd_find_chipset_info();
- if (amd_chipset.sb_type.gen != AMD_CHIPSET_YANGTZE)
- return 0;
-
- dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
- return 1;
+ if (amd_chipset.sb_type.gen == AMD_CHIPSET_YANGTZE ||
+ amd_chipset.sb_type.gen == AMD_CHIPSET_TAISHAN) {
+ dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
+ return 1;
+ }
+ return 0;
}
EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
commit 7f81e55c737a8fa82c71f290945d729a4902f8d2 upstream.
csum_partial and csum_partial_copy_generic are defined unconditionally
and are available even when CONFIG_NET is disabled. They are used not
only by the network drivers, but also by scsi and media.
Don't limit these functions export by CONFIG_NET.
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index d159e9b9c018..672391003e40 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -94,13 +94,11 @@ unsigned long __sync_fetch_and_or_4(unsigned long *p, unsigned long v)
}
EXPORT_SYMBOL(__sync_fetch_and_or_4);
-#ifdef CONFIG_NET
/*
* Networking support
*/
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
-#endif /* CONFIG_NET */
/*
* Architecture-specific symbols
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <[email protected]>
commit e59e18989c68a8d7941005f81ad6abc4ca682de0 upstream.
After probe we would put the device in normal mode, after a runtime
suspend-resume we would put it back in normal mode. But for a regular
suspend-resume we would only put it back in normal mode if triggers
or events have been requested. This is not consistent and breaks
reading raw values after a suspend-resume.
This commit changes the regular resume path to also unconditionally put
the device back in normal mode, fixing reading of raw values not working
after a regular suspend-resume cycle.
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/accel/bmc150-accel-core.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -193,7 +193,6 @@ struct bmc150_accel_data {
struct regmap *regmap;
int irq;
struct bmc150_accel_interrupt interrupts[BMC150_ACCEL_INTERRUPTS];
- atomic_t active_intr;
struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS];
struct mutex mutex;
u8 fifo_mode, watermark;
@@ -493,11 +492,6 @@ static int bmc150_accel_set_interrupt(st
goto out_fix_power_state;
}
- if (state)
- atomic_inc(&data->active_intr);
- else
- atomic_dec(&data->active_intr);
-
return 0;
out_fix_power_state:
@@ -1709,8 +1703,7 @@ static int bmc150_accel_resume(struct de
struct bmc150_accel_data *data = iio_priv(indio_dev);
mutex_lock(&data->mutex);
- if (atomic_read(&data->active_intr))
- bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
+ bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
bmc150_accel_fifo_set_mode(data);
mutex_unlock(&data->mutex);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mel Gorman <[email protected]>
commit 48fb6f4db940e92cfb16cd878cddd59ea6120d06 upstream.
Commit 65d8fc777f6d ("futex: Remove requirement for lock_page() in
get_futex_key()") removed an unnecessary lock_page() with the
side-effect that page->mapping needed to be treated very carefully.
Two defensive warnings were added in case any assumption was missed and
the first warning assumed a correct application would not alter a
mapping backing a futex key. Since merging, it has not triggered for
any unexpected case but Mark Rutland reported the following bug
triggering due to the first warning.
kernel BUG at kernel/futex.c:679!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 3695 Comm: syz-executor1 Not tainted 4.13.0-rc3-00020-g307fec773ba3 #3
Hardware name: linux,dummy-virt (DT)
task: ffff80001e271780 task.stack: ffff000010908000
PC is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
LR is at get_futex_key+0x6a4/0xcf0 kernel/futex.c:679
pc : [<ffff00000821ac14>] lr : [<ffff00000821ac14>] pstate: 80000145
The fact that it's a bug instead of a warning was due to an unrelated
arm64 problem, but the warning itself triggered because the underlying
mapping changed.
This is an application issue but from a kernel perspective it's a
recoverable situation and the warning is unnecessary so this patch
removes the warning. The warning may potentially be triggered with the
following test program from Mark although it may be necessary to adjust
NR_FUTEX_THREADS to be a value smaller than the number of CPUs in the
system.
#include <linux/futex.h>
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <sys/syscall.h>
#include <sys/time.h>
#include <unistd.h>
#define NR_FUTEX_THREADS 16
pthread_t threads[NR_FUTEX_THREADS];
void *mem;
#define MEM_PROT (PROT_READ | PROT_WRITE)
#define MEM_SIZE 65536
static int futex_wrapper(int *uaddr, int op, int val,
const struct timespec *timeout,
int *uaddr2, int val3)
{
syscall(SYS_futex, uaddr, op, val, timeout, uaddr2, val3);
}
void *poll_futex(void *unused)
{
for (;;) {
futex_wrapper(mem, FUTEX_CMP_REQUEUE_PI, 1, NULL, mem + 4, 1);
}
}
int main(int argc, char *argv[])
{
int i;
mem = mmap(NULL, MEM_SIZE, MEM_PROT,
MAP_SHARED | MAP_ANONYMOUS, -1, 0);
printf("Mapping @ %p\n", mem);
printf("Creating futex threads...\n");
for (i = 0; i < NR_FUTEX_THREADS; i++)
pthread_create(&threads[i], NULL, poll_futex, NULL);
printf("Flipping mapping...\n");
for (;;) {
mmap(mem, MEM_SIZE, MEM_PROT,
MAP_FIXED | MAP_SHARED | MAP_ANONYMOUS, -1, 0);
}
return 0;
}
Reported-and-tested-by: Mark Rutland <[email protected]>
Signed-off-by: Mel Gorman <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/futex.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -668,13 +668,14 @@ again:
* this reference was taken by ihold under the page lock
* pinning the inode in place so i_lock was unnecessary. The
* only way for this check to fail is if the inode was
- * truncated in parallel so warn for now if this happens.
+ * truncated in parallel which is almost certainly an
+ * application bug. In such a case, just retry.
*
* We are not calling into get_futex_key_refs() in file-backed
* cases, therefore a successful atomic_inc return below will
* guarantee that get_futex_key() will still imply smp_mb(); (B).
*/
- if (WARN_ON_ONCE(!atomic_inc_not_zero(&inode->i_count))) {
+ if (!atomic_inc_not_zero(&inode->i_count)) {
rcu_read_unlock();
put_page(page);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
commit 6d0f581d1768d3eaba15776e7dd1fdfec10cfe36 upstream.
Currently building kernel for xtensa core with aliasing WT cache fails
with the following messages:
mm/memory.c:2152: undefined reference to `flush_dcache_page'
mm/memory.c:2332: undefined reference to `local_flush_cache_page'
mm/memory.c:1919: undefined reference to `local_flush_cache_range'
mm/memory.c:4179: undefined reference to `copy_to_user_page'
mm/memory.c:4183: undefined reference to `copy_from_user_page'
This happens because implementation of these functions is only compiled
when data cache is WB, which looks wrong: even when data cache doesn't
need flushing it still needs invalidation. The functions like
__flush_[invalidate_]dcache_* are correctly defined for both WB and WT
caches (and even if they weren't that'd still be ok, just slower).
Fix this by providing the same implementation of the above functions for
both WB and WT cache.
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/xtensa/mm/cache.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -120,10 +120,6 @@ void copy_user_highpage(struct page *dst
preempt_enable();
}
-#endif /* DCACHE_WAY_SIZE > PAGE_SIZE */
-
-#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
-
/*
* Any time the kernel writes to a user page cache page, or it is about to
* read from a page cache page this routine is called.
@@ -208,7 +204,7 @@ void local_flush_cache_page(struct vm_ar
__invalidate_icache_page_alias(virt, phys);
}
-#endif
+#endif /* DCACHE_WAY_SIZE > PAGE_SIZE */
void
update_mmu_cache(struct vm_area_struct * vma, unsigned long addr, pte_t *ptep)
@@ -225,7 +221,7 @@ update_mmu_cache(struct vm_area_struct *
flush_tlb_page(vma, addr);
-#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
if (!PageReserved(page) && test_bit(PG_arch_1, &page->flags)) {
unsigned long phys = page_to_phys(page);
@@ -256,7 +252,7 @@ update_mmu_cache(struct vm_area_struct *
* flush_dcache_page() on the page.
*/
-#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
unsigned long vaddr, void *dst, const void *src,
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Max Filippov <[email protected]>
commit bc652eb6a0d5cffaea7dc8e8ad488aab2a1bf1ed upstream.
Functions clear_user_highpage, copy_user_highpage, flush_dcache_page,
local_flush_cache_range and local_flush_cache_page may be used from
modules. Export them.
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
diff --git a/arch/xtensa/mm/cache.c b/arch/xtensa/mm/cache.c
index dbb1cdef3663..3c75c4e597da 100644
--- a/arch/xtensa/mm/cache.c
+++ b/arch/xtensa/mm/cache.c
@@ -103,6 +103,7 @@ void clear_user_highpage(struct page *page, unsigned long vaddr)
clear_page_alias(kvaddr, paddr);
preempt_enable();
}
+EXPORT_SYMBOL(clear_user_highpage);
void copy_user_highpage(struct page *dst, struct page *src,
unsigned long vaddr, struct vm_area_struct *vma)
@@ -119,6 +120,7 @@ void copy_user_highpage(struct page *dst, struct page *src,
copy_page_alias(dst_vaddr, src_vaddr, dst_paddr, src_paddr);
preempt_enable();
}
+EXPORT_SYMBOL(copy_user_highpage);
/*
* Any time the kernel writes to a user page cache page, or it is about to
@@ -172,7 +174,7 @@ void flush_dcache_page(struct page *page)
/* There shouldn't be an entry in the cache for this page anymore. */
}
-
+EXPORT_SYMBOL(flush_dcache_page);
/*
* For now, flush the whole cache. FIXME??
@@ -184,6 +186,7 @@ void local_flush_cache_range(struct vm_area_struct *vma,
__flush_invalidate_dcache_all();
__invalidate_icache_all();
}
+EXPORT_SYMBOL(local_flush_cache_range);
/*
* Remove any entry in the cache for this page.
@@ -203,6 +206,7 @@ void local_flush_cache_page(struct vm_area_struct *vma, unsigned long address,
__flush_invalidate_dcache_page_alias(virt, phys);
__invalidate_icache_page_alias(virt, phys);
}
+EXPORT_SYMBOL(local_flush_cache_page);
#endif /* DCACHE_WAY_SIZE > PAGE_SIZE */
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Boris Brezillon <[email protected]>
commit a11bf5ed951f8900d244d09eb03a888b59c7fc82 upstream.
Some ONFI NANDs do not support the SET/GET FEATURES commands, which,
according to the spec, is perfectly valid.
On these NANDs we can't set a specific timing mode using the "timing
mode" feature, and we should assume the NAND does not require any setup
to enter a specific timing mode.
Signed-off-by: Boris Brezillon <[email protected]>
Fixes: d8e725dd8311 ("mtd: nand: automate NAND timings selection")
Reported-by: Alexander Dahl <[email protected]>
Tested-by: Alexander Dahl <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/nand_base.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1081,7 +1081,9 @@ static int nand_setup_data_interface(str
* Ensure the timing mode has been changed on the chip side
* before changing timings on the controller side.
*/
- if (chip->onfi_version) {
+ if (chip->onfi_version &&
+ (le16_to_cpu(chip->onfi_params.opt_cmd) &
+ ONFI_OPT_CMD_SET_GET_FEATURES)) {
u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = {
chip->onfi_timing_mode_default,
};
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rafael J. Wysocki <[email protected]>
commit cd5a6a4fdaba150089af2afc220eae0fef74878a upstream.
Make usb_hc_died() clear the HCD_FLAG_RH_RUNNING flag for the shared
HCD and set HCD_FLAG_DEAD for it, in analogy with what is done for
the primary one.
Among other thigs, this prevents check_root_hub_suspended() from
returning -EBUSY for dead HCDs which helps to work around system
suspend issues in some situations.
This actually fixes occasional suspend failures on one of my test
machines.
Suggested-by: Alan Stern <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/hcd.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2474,6 +2474,8 @@ void usb_hc_died (struct usb_hcd *hcd)
}
if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
hcd = hcd->shared_hcd;
+ clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+ set_bit(HCD_FLAG_DEAD, &hcd->flags);
if (hcd->rh_registered) {
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang <[email protected]>
commit d041353dc98a6339182cd6f628b4c8f111278cb3 upstream.
We saw many list corruption warnings on shmem shrinklist:
WARNING: CPU: 18 PID: 177 at lib/list_debug.c:59 __list_del_entry+0x9e/0xc0
list_del corruption. prev->next should be ffff9ae5694b82d8, but was ffff9ae5699ba960
Modules linked in: intel_rapl sb_edac edac_core x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul ghash_clmulni_intel raid0 dcdbas shpchp wmi hed i2c_i801 ioatdma lpc_ich i2c_smbus acpi_cpufreq tcp_diag inet_diag sch_fq_codel ipmi_si ipmi_devintf ipmi_msghandler igb ptp crc32c_intel pps_core i2c_algo_bit i2c_core dca ipv6 crc_ccitt
CPU: 18 PID: 177 Comm: kswapd1 Not tainted 4.9.34-t3.el7.twitter.x86_64 #1
Hardware name: Dell Inc. PowerEdge C6220/0W6W6G, BIOS 2.2.3 11/07/2013
Call Trace:
dump_stack+0x4d/0x66
__warn+0xcb/0xf0
warn_slowpath_fmt+0x4f/0x60
__list_del_entry+0x9e/0xc0
shmem_unused_huge_shrink+0xfa/0x2e0
shmem_unused_huge_scan+0x20/0x30
super_cache_scan+0x193/0x1a0
shrink_slab.part.41+0x1e3/0x3f0
shrink_slab+0x29/0x30
shrink_node+0xf9/0x2f0
kswapd+0x2d8/0x6c0
kthread+0xd7/0xf0
ret_from_fork+0x22/0x30
WARNING: CPU: 23 PID: 639 at lib/list_debug.c:33 __list_add+0x89/0xb0
list_add corruption. prev->next should be next (ffff9ae5699ba960), but was ffff9ae5694b82d8. (prev=ffff9ae5694b82d8).
Modules linked in: intel_rapl sb_edac edac_core x86_pkg_temp_thermal coretemp iTCO_wdt iTCO_vendor_support crct10dif_pclmul crc32_pclmul ghash_clmulni_intel raid0 dcdbas shpchp wmi hed i2c_i801 ioatdma lpc_ich i2c_smbus acpi_cpufreq tcp_diag inet_diag sch_fq_codel ipmi_si ipmi_devintf ipmi_msghandler igb ptp crc32c_intel pps_core i2c_algo_bit i2c_core dca ipv6 crc_ccitt
CPU: 23 PID: 639 Comm: systemd-udevd Tainted: G W 4.9.34-t3.el7.twitter.x86_64 #1
Hardware name: Dell Inc. PowerEdge C6220/0W6W6G, BIOS 2.2.3 11/07/2013
Call Trace:
dump_stack+0x4d/0x66
__warn+0xcb/0xf0
warn_slowpath_fmt+0x4f/0x60
__list_add+0x89/0xb0
shmem_setattr+0x204/0x230
notify_change+0x2ef/0x440
do_truncate+0x5d/0x90
path_openat+0x331/0x1190
do_filp_open+0x7e/0xe0
do_sys_open+0x123/0x200
SyS_open+0x1e/0x20
do_syscall_64+0x61/0x170
entry_SYSCALL64_slow_path+0x25/0x25
The problem is that shmem_unused_huge_shrink() moves entries from the
global sbinfo->shrinklist to its local lists and then releases the
spinlock. However, a parallel shmem_setattr() could access one of these
entries directly and add it back to the global shrinklist if it is
removed, with the spinlock held.
The logic itself looks solid since an entry could be either in a local
list or the global list, otherwise it is removed from one of them by
list_del_init(). So probably the race condition is that, one CPU is in
the middle of INIT_LIST_HEAD() but the other CPU calls list_empty()
which returns true too early then the following list_add_tail() sees a
corrupted entry.
list_empty_careful() is designed to fix this situation.
[[email protected]: add comments]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure")
Signed-off-by: Cong Wang <[email protected]>
Acked-by: Linus Torvalds <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/shmem.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1007,7 +1007,11 @@ static int shmem_setattr(struct dentry *
*/
if (IS_ENABLED(CONFIG_TRANSPARENT_HUGE_PAGECACHE)) {
spin_lock(&sbinfo->shrinklist_lock);
- if (list_empty(&info->shrinklist)) {
+ /*
+ * _careful to defend against unlocked access to
+ * ->shrink_list in shmem_unused_huge_shrink()
+ */
+ if (list_empty_careful(&info->shrinklist)) {
list_add_tail(&info->shrinklist,
&sbinfo->shrinklist);
sbinfo->shrinklist_len++;
@@ -1774,7 +1778,11 @@ alloc_nohuge: page = shmem_alloc_and_ac
* to shrink under memory pressure.
*/
spin_lock(&sbinfo->shrinklist_lock);
- if (list_empty(&info->shrinklist)) {
+ /*
+ * _careful to defend against unlocked access to
+ * ->shrink_list in shmem_unused_huge_shrink()
+ */
+ if (list_empty_careful(&info->shrinklist)) {
list_add_tail(&info->shrinklist,
&sbinfo->shrinklist);
sbinfo->shrinklist_len++;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bin Liu <[email protected]>
commit 45d73860530a14c608f410b91c6c341777bfa85d upstream.
commit 68fe05e2a451 ("usb: musb: fix tx fifo flush handling") drops the
1ms delay trying to solve the long disconnect time issue when
application queued many tx urbs. However, the 1ms delay is needed for
some use cases, for example, without the delay, reconnecting AR9271 WIFI
dongle no longer works if the connection is dropped from the AP.
So let's add back the 1ms delay in musb_h_tx_flush_fifo(), and solve the
long disconnect time problem with a separate patch for
usb_hcd_flush_endpoint().
Signed-off-by: Bin Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/musb/musb_host.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -139,6 +139,7 @@ static void musb_h_tx_flush_fifo(struct
"Could not flush host TX%d fifo: csr: %04x\n",
ep->epnum, csr))
return;
+ mdelay(1);
}
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stefan Triller <[email protected]>
commit 9585e340db9f6cc1c0928d82c3a23cc4460f0a3f upstream.
The German Telekom offers a ZigBee USB Stick under the brand name Qivicon
for their SmartHome Home Base in its 1. Generation. The productId is not
known by the according kernel module, this patch adds support for it.
Signed-off-by: Stefan Triller <[email protected]>
Reviewed-by: Frans Klaver <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -136,6 +136,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
{ USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
+ { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Greg Kroah-Hartman <[email protected]>
commit 3b6bcd3d093c698d32e93d4da57679b8fbc5e01e upstream.
This adds a new ATEN device id for a new pl2303-based device.
Reported-by: Peter Kuo <[email protected]>
Cc: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -49,6 +49,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
+ { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC485) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },
{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -27,6 +27,7 @@
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
#define ATEN_PRODUCT_ID 0x2008
+#define ATEN_PRODUCT_UC485 0x2021
#define ATEN_PRODUCT_ID2 0x2118
#define IODATA_VENDOR_ID 0x04bb
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maarten Lankhorst <[email protected]>
commit 5279fc7724ae3a82c9cfe5b09c1fb07ff0e41056 upstream.
bdw_load_gamma_lut is writing beyond the array to the maximum value.
The intend of the function is to clamp values > 1 to 1, so write
the intended color to the max register.
This fixes the following KASAN warning:
[ 197.020857] [IGT] kms_pipe_color: executing
[ 197.063434] [IGT] kms_pipe_color: starting subtest ctm-0-25-pipe0
[ 197.078989] ==================================================================
[ 197.079127] BUG: KASAN: slab-out-of-bounds in bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[ 197.079188] Read of size 2 at addr ffff8800d38db150 by task kms_pipe_color/1839
[ 197.079208] CPU: 2 PID: 1839 Comm: kms_pipe_color Tainted: G U 4.13.0-rc1-patser+ #5211
[ 197.079215] Hardware name: NUC5i7RYB, BIOS RYBDWi35.86A.0246.2015.0309.1355 03/09/2015
[ 197.079220] Call Trace:
[ 197.079230] dump_stack+0x68/0x9e
[ 197.079239] print_address_description+0x6f/0x250
[ 197.079251] kasan_report+0x216/0x370
[ 197.079374] ? bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[ 197.079451] ? gen8_write16+0x4e0/0x4e0 [i915]
[ 197.079460] __asan_report_load2_noabort+0x14/0x20
[ 197.079535] bdw_load_gamma_lut.isra.2+0x3b9/0x570 [i915]
[ 197.079612] broadwell_load_luts+0x1df/0x550 [i915]
[ 197.079690] intel_color_load_luts+0x7b/0x80 [i915]
[ 197.079764] intel_begin_crtc_commit+0x138/0x760 [i915]
[ 197.079783] drm_atomic_helper_commit_planes_on_crtc+0x1a3/0x820 [drm_kms_helper]
[ 197.079859] ? intel_pre_plane_update+0x571/0x580 [i915]
[ 197.079937] intel_update_crtc+0x238/0x330 [i915]
[ 197.080016] intel_update_crtcs+0x10f/0x210 [i915]
[ 197.080092] intel_atomic_commit_tail+0x1552/0x3340 [i915]
[ 197.080101] ? _raw_spin_unlock+0x3c/0x40
[ 197.080110] ? __queue_work+0xb40/0xbf0
[ 197.080188] ? skl_update_crtcs+0xc00/0xc00 [i915]
[ 197.080195] ? trace_hardirqs_on+0xd/0x10
[ 197.080269] ? intel_atomic_commit_ready+0x128/0x13c [i915]
[ 197.080329] ? __i915_sw_fence_complete+0x5b8/0x6d0 [i915]
[ 197.080336] ? debug_object_activate+0x39e/0x580
[ 197.080397] ? i915_sw_fence_await+0x30/0x30 [i915]
[ 197.080409] ? __might_sleep+0x15b/0x180
[ 197.080483] intel_atomic_commit+0x944/0xa70 [i915]
[ 197.080490] ? refcount_dec_and_test+0x11/0x20
[ 197.080567] ? intel_atomic_commit_tail+0x3340/0x3340 [i915]
[ 197.080597] ? drm_atomic_crtc_set_property+0x303/0x580 [drm]
[ 197.080674] ? intel_atomic_commit_tail+0x3340/0x3340 [i915]
[ 197.080704] drm_atomic_commit+0xd7/0xe0 [drm]
[ 197.080722] drm_atomic_helper_crtc_set_property+0xec/0x130 [drm_kms_helper]
[ 197.080749] drm_mode_crtc_set_obj_prop+0x7d/0xb0 [drm]
[ 197.080775] drm_mode_obj_set_property_ioctl+0x50b/0x5d0 [drm]
[ 197.080783] ? __might_fault+0x104/0x180
[ 197.080809] ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[ 197.080838] ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[ 197.080861] drm_ioctl_kernel+0x154/0x1a0 [drm]
[ 197.080885] drm_ioctl+0x624/0x8f0 [drm]
[ 197.080910] ? drm_mode_obj_find_prop_id+0x160/0x160 [drm]
[ 197.080934] ? drm_getunique+0x210/0x210 [drm]
[ 197.080943] ? __handle_mm_fault+0x1bd0/0x1ce0
[ 197.080949] ? lock_downgrade+0x610/0x610
[ 197.080957] ? __lru_cache_add+0x15a/0x180
[ 197.080967] do_vfs_ioctl+0xd92/0xe40
[ 197.080975] ? ioctl_preallocate+0x1b0/0x1b0
[ 197.080982] ? selinux_capable+0x20/0x20
[ 197.080991] ? __do_page_fault+0x7b7/0x9a0
[ 197.080997] ? lock_downgrade+0x5bb/0x610
[ 197.081007] ? security_file_ioctl+0x57/0x90
[ 197.081016] SyS_ioctl+0x4e/0x80
[ 197.081024] entry_SYSCALL_64_fastpath+0x18/0xad
[ 197.081030] RIP: 0033:0x7f61f287a987
[ 197.081035] RSP: 002b:00007fff7d44d188 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 197.081043] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f61f287a987
[ 197.081048] RDX: 00007fff7d44d1c0 RSI: 00000000c01864ba RDI: 0000000000000003
[ 197.081053] RBP: 00007f61f2b3eb00 R08: 0000000000000059 R09: 0000000000000000
[ 197.081058] R10: 0000002ea5c4a290 R11: 0000000000000246 R12: 00007f61f2b3eb58
[ 197.081063] R13: 0000000000001010 R14: 00007f61f2b3eb58 R15: 0000000000002702
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101659
Signed-off-by: Maarten Lankhorst <[email protected]>
Reported-by: Martin Peres <[email protected]>
Cc: Martin Peres <[email protected]>
Fixes: 82cf435b3134 ("drm/i915: Implement color management on bdw/skl/bxt/kbl")
Cc: Shashank Sharma <[email protected]>
Cc: Kiran S Kumar <[email protected]>
Cc: Kausal Malladi <[email protected]>
Cc: Lionel Landwerlin <[email protected]>
Cc: Matt Roper <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Lionel Landwerlin <[email protected]>
(cherry picked from commit 09a92bc8773b4314e02b478e003fe5936ce85adb)
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_color.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/i915/intel_color.c
+++ b/drivers/gpu/drm/i915/intel_color.c
@@ -394,6 +394,7 @@ static void broadwell_load_luts(struct d
}
/* Program the max register to clamp values > 1.0. */
+ i = lut_size - 1;
I915_WRITE(PREC_PAL_GC_MAX(pipe, 0),
drm_color_lut_extract(lut[i].red, 16));
I915_WRITE(PREC_PAL_GC_MAX(pipe, 1),
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hector Martin <[email protected]>
commit fd1b8668af59a11bb754a6c9b0051c6c5ce73b74 upstream.
Add device id for D-Link DWM-222.
Signed-off-by: Hector Martin <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2025,6 +2025,8 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) }, /* D-Link DWM-158 */
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff), /* D-Link DWM-221 B1 */
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff), /* D-Link DWM-222 */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wladimir J. van der Laan <[email protected]>
commit d6f756e09f01ea7a0efbbcef269a1e384a35d824 upstream.
A relocation pointing to the last four bytes of a buffer can
legitimately happen in the case of small vertex buffers.
Signed-off-by: Wladimir J. van der Laan <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Reviewed-by: Christian Gmeiner <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gem_submit.c
@@ -264,8 +264,8 @@ static int submit_reloc(struct etnaviv_g
if (ret)
return ret;
- if (r->reloc_offset >= bo->obj->base.size - sizeof(*ptr)) {
- DRM_ERROR("relocation %u outside object", i);
+ if (r->reloc_offset > bo->obj->base.size - sizeof(*ptr)) {
+ DRM_ERROR("relocation %u outside object\n", i);
return -EINVAL;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Haibo Chen <[email protected]>
commit 92ddd95919466de5d34f3cb43635da9a7f9ab814 upstream.
Change the default err value to -EINVAL, make sure the card only
has type EXT_CSD_CARD_TYPE_HS400_1_8V also do the signal voltage
setting when select hs400es mode.
Fixes: commit 1720d3545b77 ("mmc: core: switch to 1V8 or 1V2 for hs400es mode")
Signed-off-by: Haibo Chen <[email protected]>
Reviewed-by: Shawn Lin <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/core/mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1258,7 +1258,7 @@ out_err:
static int mmc_select_hs400es(struct mmc_card *card)
{
struct mmc_host *host = card->host;
- int err = 0;
+ int err = -EINVAL;
u8 val;
if (!(host->caps & MMC_CAP_8_BIT_DATA)) {
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Weston Andros Adamson <[email protected]>
commit 1feb26162bee7b2f110facfec71b5c7bdbc7d14d upstream.
The client was freeing the nfs4_ff_layout_ds, but not the contained
nfs4_ff_ds_version array.
Signed-off-by: Weston Andros Adamson <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfs/flexfilelayout/flexfilelayoutdev.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/nfs/flexfilelayout/flexfilelayoutdev.c
+++ b/fs/nfs/flexfilelayout/flexfilelayoutdev.c
@@ -30,6 +30,7 @@ void nfs4_ff_layout_free_deviceid(struct
{
nfs4_print_deviceid(&mirror_ds->id_node.deviceid);
nfs4_pnfs_ds_put(mirror_ds->ds);
+ kfree(mirror_ds->ds_versions);
kfree_rcu(mirror_ds, id_node.rcu);
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miquel Raynal <[email protected]>
commit f7f8c1756e9a5f1258a7cc6b663f8451b724900f upstream.
When using soft ecc, if no ooblayout is given, the core automatically
uses one of the nand_ooblayout_{sp,lp}*() functions to determine the
layout inside the out of band data.
Until kernel version 4.6, struct nand_ecclayout was used for that
purpose. During the migration from 4.6 to 4.7, an error shown up in the
small page layout, in the case oob section is only 8 bytes long.
The layout was using three bytes (0, 1, 2) for ecc, two bytes (3, 4)
as free bytes, one byte (5) for bad block marker and finally
two bytes (6, 7) as free bytes, as shown there:
[linux-4.6] drivers/mtd/nand/nand_base.c:52
static struct nand_ecclayout nand_oob_8 = {
.eccbytes = 3,
.eccpos = {0, 1, 2},
.oobfree = {
{.offset = 3,
.length = 2},
{.offset = 6,
.length = 2} }
};
This fixes the current implementation which is incoherent. It
references bit 3 at the same time as an ecc byte and a free byte.
Furthermore, it is clear with the previous implementation that there
is only one ecc section with 8 bytes oob sections. We shall return
-ERANGE in the nand_ooblayout_ecc_sp() function when asked for the
second section.
Signed-off-by: Miquel Raynal <[email protected]>
Fixes: 41b207a70d3a ("mtd: nand: implement the default mtd_ooblayout_ops")
Signed-off-by: Boris Brezillon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mtd/nand/nand_base.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -64,8 +64,14 @@ static int nand_ooblayout_ecc_sp(struct
if (!section) {
oobregion->offset = 0;
- oobregion->length = 4;
+ if (mtd->oobsize == 16)
+ oobregion->length = 4;
+ else
+ oobregion->length = 3;
} else {
+ if (mtd->oobsize == 8)
+ return -ERANGE;
+
oobregion->offset = 6;
oobregion->length = ecc->total - 4;
}
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Bellinger <[email protected]>
commit 6f48655facfd7f7ccfe6d252ac0fe319ab02e4dd upstream.
This patch fixes a generate_node_acls = 1 + cache_dynamic_acls = 0
regression, that was introduced by
commit 01d4d673558985d9a118e1e05026633c3e2ade9b
Author: Nicholas Bellinger <[email protected]>
Date: Wed Dec 7 12:55:54 2016 -0800
which originally had the proper list_del_init() usage, but was
dropped during list review as it was thought unnecessary by HCH.
However, list_del_init() usage is required during the special
generate_node_acls = 1 + cache_dynamic_acls = 0 case when
transport_free_session() does a list_del(&se_nacl->acl_list),
followed by target_complete_nacl() doing the same thing.
This was manifesting as a general protection fault as reported
by Justin:
kernel: general protection fault: 0000 [#1] SMP
kernel: Modules linked in:
kernel: CPU: 0 PID: 11047 Comm: iscsi_ttx Not tainted 4.13.0-rc2.x86_64.1+ #20
kernel: Hardware name: Intel Corporation S5500BC/S5500BC, BIOS S5500.86B.01.00.0064.050520141428 05/05/2014
kernel: task: ffff88026939e800 task.stack: ffffc90007884000
kernel: RIP: 0010:target_put_nacl+0x49/0xb0
kernel: RSP: 0018:ffffc90007887d70 EFLAGS: 00010246
kernel: RAX: dead000000000200 RBX: ffff8802556ca000 RCX: 0000000000000000
kernel: RDX: dead000000000100 RSI: 0000000000000246 RDI: ffff8802556ce028
kernel: RBP: ffffc90007887d88 R08: 0000000000000001 R09: 0000000000000000
kernel: R10: ffffc90007887df8 R11: ffffea0009986900 R12: ffff8802556ce020
kernel: R13: ffff8802556ce028 R14: ffff8802556ce028 R15: ffffffff88d85540
kernel: FS: 0000000000000000(0000) GS:ffff88027fc00000(0000) knlGS:0000000000000000
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 00007fffe36f5f94 CR3: 0000000009209000 CR4: 00000000003406f0
kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
kernel: Call Trace:
kernel: transport_free_session+0x67/0x140
kernel: transport_deregister_session+0x7a/0xc0
kernel: iscsit_close_session+0x92/0x210
kernel: iscsit_close_connection+0x5f9/0x840
kernel: iscsit_take_action_for_connection_exit+0xfe/0x110
kernel: iscsi_target_tx_thread+0x140/0x1e0
kernel: ? wait_woken+0x90/0x90
kernel: kthread+0x124/0x160
kernel: ? iscsit_thread_get_cpumask+0x90/0x90
kernel: ? kthread_create_on_node+0x40/0x40
kernel: ret_from_fork+0x22/0x30
kernel: Code: 00 48 89 fb 4c 8b a7 48 01 00 00 74 68 4d 8d 6c 24 08 4c
89 ef e8 e8 28 43 00 48 8b 93 20 04 00 00 48 8b 83 28 04 00 00 4c 89
ef <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 20
kernel: RIP: target_put_nacl+0x49/0xb0 RSP: ffffc90007887d70
kernel: ---[ end trace f12821adbfd46fed ]---
To address this, go ahead and use proper list_del_list() for all
cases of se_nacl->acl_list deletion.
Reported-by: Justin Maggard <[email protected]>
Tested-by: Justin Maggard <[email protected]>
Cc: Justin Maggard <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/target_core_tpg.c | 4 ++--
drivers/target/target_core_transport.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -364,7 +364,7 @@ void core_tpg_del_initiator_node_acl(str
mutex_lock(&tpg->acl_node_mutex);
if (acl->dynamic_node_acl)
acl->dynamic_node_acl = 0;
- list_del(&acl->acl_list);
+ list_del_init(&acl->acl_list);
mutex_unlock(&tpg->acl_node_mutex);
target_shutdown_sessions(acl);
@@ -540,7 +540,7 @@ int core_tpg_deregister(struct se_portal
* in transport_deregister_session().
*/
list_for_each_entry_safe(nacl, nacl_tmp, &node_list, acl_list) {
- list_del(&nacl->acl_list);
+ list_del_init(&nacl->acl_list);
core_tpg_wait_for_nacl_pr_ref(nacl);
core_free_device_list_for_node(nacl, se_tpg);
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -465,7 +465,7 @@ static void target_complete_nacl(struct
}
mutex_lock(&se_tpg->acl_node_mutex);
- list_del(&nacl->acl_list);
+ list_del_init(&nacl->acl_list);
mutex_unlock(&se_tpg->acl_node_mutex);
core_tpg_wait_for_nacl_pr_ref(nacl);
@@ -537,7 +537,7 @@ void transport_free_session(struct se_se
spin_unlock_irqrestore(&se_nacl->nacl_sess_lock, flags);
if (se_nacl->dynamic_stop)
- list_del(&se_nacl->acl_list);
+ list_del_init(&se_nacl->acl_list);
}
mutex_unlock(&se_tpg->acl_node_mutex);
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mateusz Jurczyk <[email protected]>
commit 68227c03cba84a24faf8a7277d2b1a03c8959c2c upstream.
Before the patch, the flock flag could remain uninitialized for the
lifespan of the fuse_file allocation. Unless set to true in
fuse_file_flock(), it would remain in an indeterminate state until read in
an if statement in fuse_release_common(). This could consequently lead to
taking an unexpected branch in the code.
The bug was discovered by a runtime instrumentation designed to detect use
of uninitialized memory in the kernel.
Signed-off-by: Mateusz Jurczyk <[email protected]>
Fixes: 37fb3a30b462 ("fuse: fix flock")
Signed-off-by: Miklos Szeredi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fuse/file.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -46,7 +46,7 @@ struct fuse_file *fuse_file_alloc(struct
{
struct fuse_file *ff;
- ff = kmalloc(sizeof(struct fuse_file), GFP_KERNEL);
+ ff = kzalloc(sizeof(struct fuse_file), GFP_KERNEL);
if (unlikely(!ff))
return NULL;
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonathan Toppins <[email protected]>
commit 75dddef32514f7aa58930bde6a1263253bc3d4ba upstream.
The RDMA subsystem can generate several thousand of these messages per
second eventually leading to a kernel crash. Ratelimit these messages
to prevent this crash.
Doug said:
"I've been carrying a version of this for several kernel versions. I
don't remember when they started, but we have one (and only one) class
of machines: Dell PE R730xd, that generate these errors. When it
happens, without a rate limit, we get rcu timeouts and kernel oopses.
With the rate limit, we just get a lot of annoying kernel messages but
the machine continues on, recovers, and eventually the memory
operations all succeed"
And:
"> Well... why are all these EBUSY's occurring? It sounds inefficient
> (at least) but if it is expected, normal and unavoidable then
> perhaps we should just remove that message altogether?
I don't have an answer to that question. To be honest, I haven't
looked real hard. We never had this at all, then it started out of the
blue, but only on our Dell 730xd machines (and it hits all of them),
but no other classes or brands of machines. And we have our 730xd
machines loaded up with different brands and models of cards (for
instance one dedicated to mlx4 hardware, one for qib, one for mlx5, an
ocrdma/cxgb4 combo, etc), so the fact that it hit all of the machines
meant it wasn't tied to any particular brand/model of RDMA hardware.
To me, it always smelled of a hardware oddity specific to maybe the
CPUs or mainboard chipsets in these machines, so given that I'm not an
mm expert anyway, I never chased it down.
A few other relevant details: it showed up somewhere around 4.8/4.9 or
thereabouts. It never happened before, but the prinkt has been there
since the 3.18 days, so possibly the test to trigger this message was
changed, or something else in the allocator changed such that the
situation started happening on these machines?
And, like I said, it is specific to our 730xd machines (but they are
all identical, so that could mean it's something like their specific
ram configuration is causing the allocator to hit this on these
machine but not on other machines in the cluster, I don't want to say
it's necessarily the model of chipset or CPU, there are other bits of
identicalness between these machines)"
Link: http://lkml.kernel.org/r/499c0f6cc10d6eb829a67f2a4d75b4228a9b356e.1501695897.git.jtoppins@redhat.com
Signed-off-by: Jonathan Toppins <[email protected]>
Reviewed-by: Doug Ledford <[email protected]>
Tested-by: Doug Ledford <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Hillf Danton <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/page_alloc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -7335,7 +7335,7 @@ int alloc_contig_range(unsigned long sta
/* Make sure the range is really isolated. */
if (test_pages_isolated(outer_start, end, false)) {
- pr_info("%s: [%lx, %lx) PFNs busy\n",
+ pr_info_ratelimited("%s: [%lx, %lx) PFNs busy\n",
__func__, outer_start, end);
ret = -EBUSY;
goto done;
On 08/14/2017 06:18 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.44 release.
> There are 41 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Aug 17 01:17:56 UTC 2017.
> Anything received after that time might be too late.
>
Build results:
total: 145 pass: 145 fail: 0
Qemu test results:
total: 122 pass: 122 fail: 0
Details are available at http://kerneltests.org/builders.
Guenter
On 08/14/2017 07:18 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.44 release.
> There are 41 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Aug 17 01:17:56 UTC 2017.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.44-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah