A few minor patches are needed to more easily boot a MIPS Magnum build
under 'qemu-system-mips64el -M magnum'. This series fixes a build failure
in the g364fb driver and modifies jazz_defconfig for use with QEMU.
Note that QEMU's dp8393x implementation has bugs, one of which prevents
the Linux jazzsonic driver from probing the chip. I have fixed the bugs
that I know of in a series of patches at,
https://github.com/fthain/qemu/commits/sonic
Finn Thain (3):
fbdev/g364fb: Fix build failure
mips/jazz: Remove redundant settings and shrink jazz_defconfig
mips/jazz: Update jazz_defconfig for MIPS Magnum
arch/mips/configs/jazz_defconfig | 267 ++-----------------------------
drivers/video/fbdev/g364fb.c | 29 +---
2 files changed, 15 insertions(+), 281 deletions(-)
--
2.24.1
Enable some options for machine type, framebuffer, serial controller and
ATA interfaces.
This allows a jazz_defconfig build to work on the emulated MIPS Magnum
machine provided by qemu-system-mips64el.
Signed-off-by: Finn Thain <[email protected]>
---
This patch enables CONFIG_FB_G364. This depends upon the build fix at
the beginning of this patch series.
---
arch/mips/configs/jazz_defconfig | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index b13b2396a8a9..92085df3e367 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -1,5 +1,7 @@
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
@@ -8,6 +10,8 @@ CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_MACH_JAZZ=y
CONFIG_OLIVETTI_M700=y
+CONFIG_MIPS_MAGNUM_4000=y
+CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -25,6 +29,7 @@ CONFIG_INET6_IPCOMP=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_1284=y
+CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -44,6 +49,8 @@ CONFIG_ISCSI_TCP=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
CONFIG_JAZZ_ESP=y
+CONFIG_ATA=y
+CONFIG_PATA_LEGACY=y
CONFIG_NETDEVICES=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
@@ -54,11 +61,15 @@ CONFIG_NE2000=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_RAW=m
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
+CONFIG_FB=y
+CONFIG_FB_G364=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_HWMON is not set
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=y
--
2.24.1
Remove some redundant assignments, that have no effect on
'make jazz_defconfig':
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_CRYPTO_HMAC=y
Also drop the settings relating to crypto, wireless, advanced
networking etc. The Kconfig defaults for these options are fine.
This reduces the size of vmlinux so it can be launched by
"NetBSD/arc Bootstrap, Revision 1.1", which is conveniently available
on NetBSD/arc 5.1 ISO images.
Signed-off-by: Finn Thain <[email protected]>
---
arch/mips/configs/jazz_defconfig | 254 -------------------------------
1 file changed, 254 deletions(-)
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index 328d4dfeb4cb..b13b2396a8a9 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -2,8 +2,6 @@ CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_RELAY=y
CONFIG_EXPERT=y
@@ -18,168 +16,16 @@ CONFIG_BINFMT_MISC=m
CONFIG_NET=y
CONFIG_PACKET=m
CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_DECNET_NF_GRABULATOR=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE=m
-CONFIG_DECNET=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_HAMRADIO=y
-CONFIG_AX25=m
-CONFIG_NETROM=m
-CONFIG_ROSE=m
-CONFIG_MKISS=m
-CONFIG_6PACK=m
-CONFIG_BPQETHER=m
-CONFIG_CONNECTOR=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_1284=y
CONFIG_BLK_DEV_FD=m
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
@@ -194,26 +40,10 @@ CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_SAS_ATTRS=m
CONFIG_ISCSI_TCP=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
CONFIG_JAZZ_ESP=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
CONFIG_NETDEVICES=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
@@ -221,16 +51,6 @@ CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_MIPS_JAZZ_SONIC=y
CONFIG_NE2000=m
-CONFIG_PHYLIB=m
-CONFIG_CICADA_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_MARVELL_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_PLIP=m
-CONFIG_INPUT_FF_MEMLESS=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_RAW=m
CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -239,10 +59,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
-CONFIG_PRINTER=m
-CONFIG_PPDEV=m
-# CONFIG_HW_RANDOM is not set
-CONFIG_W1=m
# CONFIG_HWMON is not set
CONFIG_EXT2_FS=m
CONFIG_EXT3_FS=y
@@ -263,78 +79,8 @@ CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
CONFIG_NFS_FS=m
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_CIFS=m
-CONFIG_CODA_FS=m
-CONFIG_AFS_FS=m
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC_CCITT=m
--
2.24.1
This patch resolves these compiler errors and warnings --
CC drivers/video/fbdev/g364fb.o
drivers/video/fbdev/g364fb.c: In function 'g364fb_cursor':
drivers/video/fbdev/g364fb.c:137:9: error: 'x' undeclared (first use in this function)
drivers/video/fbdev/g364fb.c:137:9: note: each undeclared identifier is reported only once for each function it appears in
drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontwidth' [-Werror=implicit-function-declaration]
drivers/video/fbdev/g364fb.c:137:23: error: 'p' undeclared (first use in this function)
drivers/video/fbdev/g364fb.c:137:38: error: 'y' undeclared (first use in this function)
drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontheight' [-Werror=implicit-function-declaration]
drivers/video/fbdev/g364fb.c: In function 'g364fb_init':
drivers/video/fbdev/g364fb.c:233:24: error: 'fbvar' undeclared (first use in this function)
drivers/video/fbdev/g364fb.c:234:24: error: 'xres' undeclared (first use in this function)
drivers/video/fbdev/g364fb.c:201:14: warning: unused variable 'j' [-Wunused-variable]
drivers/video/fbdev/g364fb.c:197:25: warning: unused variable 'pal_ptr' [-Wunused-variable]
The MIPS Magnum framebuffer console now works when tested in QEMU.
Cc: Bartlomiej Zolnierkiewicz <[email protected]>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <[email protected]>
---
drivers/video/fbdev/g364fb.c | 29 +++--------------------------
1 file changed, 3 insertions(+), 26 deletions(-)
diff --git a/drivers/video/fbdev/g364fb.c b/drivers/video/fbdev/g364fb.c
index 223896cc5f7d..fb26230a3c7b 100644
--- a/drivers/video/fbdev/g364fb.c
+++ b/drivers/video/fbdev/g364fb.c
@@ -108,7 +108,6 @@ static int g364fb_pan_display(struct fb_var_screeninfo *var,
static int g364fb_setcolreg(u_int regno, u_int red, u_int green,
u_int blue, u_int transp,
struct fb_info *info);
-static int g364fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
static int g364fb_blank(int blank, struct fb_info *info);
static struct fb_ops g364fb_ops = {
@@ -119,28 +118,8 @@ static struct fb_ops g364fb_ops = {
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
- .fb_cursor = g364fb_cursor,
};
-int g364fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
-{
-
- switch (cursor->enable) {
- case CM_ERASE:
- *(unsigned int *) CTLA_REG |= CURS_TOGGLE;
- break;
-
- case CM_MOVE:
- case CM_DRAW:
- *(unsigned int *) CTLA_REG &= ~CURS_TOGGLE;
- *(unsigned int *) CURS_POS_REG =
- ((x * fontwidth(p)) << 12) | ((y * fontheight(p)) -
- info->var.yoffset);
- break;
- }
- return 0;
-}
-
/*
* Pan or Wrap the Display
*
@@ -194,11 +173,9 @@ static int g364fb_setcolreg(u_int regno, u_int red, u_int green,
*/
int __init g364fb_init(void)
{
- volatile unsigned int *pal_ptr =
- (volatile unsigned int *) CLR_PAL_REG;
volatile unsigned int *curs_pal_ptr =
(volatile unsigned int *) CURS_PAL_REG;
- int mem, i, j;
+ int mem, i;
if (fb_get_options("g364fb", NULL))
return -ENODEV;
@@ -230,8 +207,8 @@ int __init g364fb_init(void)
*/
*(unsigned short *) (CURS_PAT_REG + 14 * 64) = 0xffff;
*(unsigned short *) (CURS_PAT_REG + 15 * 64) = 0xffff;
- fb_var.xres_virtual = fbvar.xres;
- fb_fix.line_length = (xres / 8) * fb_var.bits_per_pixel;
+ fb_var.xres_virtual = fb_var.xres;
+ fb_fix.line_length = fb_var.xres_virtual * fb_var.bits_per_pixel / 8;
fb_fix.smem_start = 0x40000000; /* physical address */
/* get size of video memory; this is special for the JAZZ hardware */
mem = (r4030_read_reg32(JAZZ_R4030_CONFIG) >> 8) & 3;
--
2.24.1
On Sun, Feb 2, 2020 at 3:41 AM Finn Thain <[email protected]> wrote:
>
> This patch resolves these compiler errors and warnings --
>
> CC drivers/video/fbdev/g364fb.o
> drivers/video/fbdev/g364fb.c: In function 'g364fb_cursor':
> drivers/video/fbdev/g364fb.c:137:9: error: 'x' undeclared (first use in this function)
> drivers/video/fbdev/g364fb.c:137:9: note: each undeclared identifier is reported only once for each function it appears in
> drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontwidth' [-Werror=implicit-function-declaration]
> drivers/video/fbdev/g364fb.c:137:23: error: 'p' undeclared (first use in this function)
> drivers/video/fbdev/g364fb.c:137:38: error: 'y' undeclared (first use in this function)
> drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontheight' [-Werror=implicit-function-declaration]
> drivers/video/fbdev/g364fb.c: In function 'g364fb_init':
> drivers/video/fbdev/g364fb.c:233:24: error: 'fbvar' undeclared (first use in this function)
> drivers/video/fbdev/g364fb.c:234:24: error: 'xres' undeclared (first use in this function)
18 years unnoticed...
> drivers/video/fbdev/g364fb.c:201:14: warning: unused variable 'j' [-Wunused-variable]
> drivers/video/fbdev/g364fb.c:197:25: warning: unused variable 'pal_ptr' [-Wunused-variable]
>
> The MIPS Magnum framebuffer console now works when tested in QEMU.
>
> Cc: Bartlomiej Zolnierkiewicz <[email protected]>
> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
This commit is the kernel 'git origin' import, not the proper reference.
The actual change is between v2.5.17/2.5.19:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/diff/drivers/video/g364fb.c?id=b30e6e183a728923267
Date: 2002-05-22 07:52:33...
The same commit introduced the changes in g364fb_cursor(), which was
implemented previous to v2.4.0 so it is hard to follow from there.
Nobody complains during 18 years so I doubt anyone care that
g364fb_cursor() is removed.
And by removing it, you improve the kernel quality, so:
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
(Maybe remove the unhelpful 'Fixes' tag).
> Signed-off-by: Finn Thain <[email protected]>
> ---
> drivers/video/fbdev/g364fb.c | 29 +++--------------------------
> 1 file changed, 3 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/video/fbdev/g364fb.c b/drivers/video/fbdev/g364fb.c
> index 223896cc5f7d..fb26230a3c7b 100644
> --- a/drivers/video/fbdev/g364fb.c
> +++ b/drivers/video/fbdev/g364fb.c
> @@ -108,7 +108,6 @@ static int g364fb_pan_display(struct fb_var_screeninfo *var,
> static int g364fb_setcolreg(u_int regno, u_int red, u_int green,
> u_int blue, u_int transp,
> struct fb_info *info);
> -static int g364fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
> static int g364fb_blank(int blank, struct fb_info *info);
>
> static struct fb_ops g364fb_ops = {
> @@ -119,28 +118,8 @@ static struct fb_ops g364fb_ops = {
> .fb_fillrect = cfb_fillrect,
> .fb_copyarea = cfb_copyarea,
> .fb_imageblit = cfb_imageblit,
> - .fb_cursor = g364fb_cursor,
> };
>
> -int g364fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
> -{
> -
> - switch (cursor->enable) {
> - case CM_ERASE:
> - *(unsigned int *) CTLA_REG |= CURS_TOGGLE;
> - break;
> -
> - case CM_MOVE:
> - case CM_DRAW:
> - *(unsigned int *) CTLA_REG &= ~CURS_TOGGLE;
> - *(unsigned int *) CURS_POS_REG =
> - ((x * fontwidth(p)) << 12) | ((y * fontheight(p)) -
> - info->var.yoffset);
> - break;
> - }
> - return 0;
> -}
> -
> /*
> * Pan or Wrap the Display
> *
> @@ -194,11 +173,9 @@ static int g364fb_setcolreg(u_int regno, u_int red, u_int green,
> */
> int __init g364fb_init(void)
> {
> - volatile unsigned int *pal_ptr =
> - (volatile unsigned int *) CLR_PAL_REG;
> volatile unsigned int *curs_pal_ptr =
> (volatile unsigned int *) CURS_PAL_REG;
> - int mem, i, j;
> + int mem, i;
>
> if (fb_get_options("g364fb", NULL))
> return -ENODEV;
> @@ -230,8 +207,8 @@ int __init g364fb_init(void)
> */
> *(unsigned short *) (CURS_PAT_REG + 14 * 64) = 0xffff;
> *(unsigned short *) (CURS_PAT_REG + 15 * 64) = 0xffff;
> - fb_var.xres_virtual = fbvar.xres;
> - fb_fix.line_length = (xres / 8) * fb_var.bits_per_pixel;
> + fb_var.xres_virtual = fb_var.xres;
> + fb_fix.line_length = fb_var.xres_virtual * fb_var.bits_per_pixel / 8;
> fb_fix.smem_start = 0x40000000; /* physical address */
> /* get size of video memory; this is special for the JAZZ hardware */
> mem = (r4030_read_reg32(JAZZ_R4030_CONFIG) >> 8) & 3;
> --
> 2.24.1
>
On 2/2/20 3:33 AM, Finn Thain wrote:
> Remove some redundant assignments, that have no effect on
> 'make jazz_defconfig':
>
> CONFIG_INET_XFRM_MODE_TRANSPORT=m
> CONFIG_INET_XFRM_MODE_TUNNEL=m
> CONFIG_CRYPTO_HMAC=y
>
> Also drop the settings relating to crypto, wireless, advanced
> networking etc. The Kconfig defaults for these options are fine.
>
> This reduces the size of vmlinux so it can be launched by
> "NetBSD/arc Bootstrap, Revision 1.1", which is conveniently available
> on NetBSD/arc 5.1 ISO images.
>
> Signed-off-by: Finn Thain <[email protected]>
> ---
> arch/mips/configs/jazz_defconfig | 254 -------------------------------
> 1 file changed, 254 deletions(-)
>
> diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
> index 328d4dfeb4cb..b13b2396a8a9 100644
> --- a/arch/mips/configs/jazz_defconfig
> +++ b/arch/mips/configs/jazz_defconfig
> @@ -2,8 +2,6 @@ CONFIG_SYSVIPC=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_PREEMPT_VOLUNTARY=y
> CONFIG_BSD_PROCESS_ACCT=y
> -CONFIG_IKCONFIG=y
> -CONFIG_IKCONFIG_PROC=y
> CONFIG_LOG_BUF_SHIFT=14
> CONFIG_RELAY=y
> CONFIG_EXPERT=y
> @@ -18,168 +16,16 @@ CONFIG_BINFMT_MISC=m
> CONFIG_NET=y
> CONFIG_PACKET=m
> CONFIG_UNIX=y
> -CONFIG_NET_KEY=m
> -CONFIG_NET_KEY_MIGRATE=y
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_NET_IPIP=m
> -CONFIG_IP_MROUTE=y
> -CONFIG_IP_PIMSM_V1=y
> -CONFIG_IP_PIMSM_V2=y
> -CONFIG_INET_XFRM_MODE_TRANSPORT=m
> -CONFIG_INET_XFRM_MODE_TUNNEL=m
> -CONFIG_TCP_MD5SIG=y
> -CONFIG_IPV6_ROUTER_PREF=y
> -CONFIG_IPV6_ROUTE_INFO=y
> CONFIG_INET6_AH=m
> CONFIG_INET6_ESP=m
> CONFIG_INET6_IPCOMP=m
> -CONFIG_IPV6_TUNNEL=m
> -CONFIG_NETWORK_SECMARK=y
> -CONFIG_NETFILTER=y
> -CONFIG_NF_CONNTRACK=m
> -CONFIG_NF_CONNTRACK_SECMARK=y
> -CONFIG_NF_CONNTRACK_EVENTS=y
> -CONFIG_NF_CONNTRACK_AMANDA=m
> -CONFIG_NF_CONNTRACK_FTP=m
> -CONFIG_NF_CONNTRACK_H323=m
> -CONFIG_NF_CONNTRACK_IRC=m
> -CONFIG_NF_CONNTRACK_PPTP=m
> -CONFIG_NF_CONNTRACK_SANE=m
> -CONFIG_NF_CONNTRACK_SIP=m
> -CONFIG_NF_CONNTRACK_TFTP=m
> -CONFIG_NF_CT_NETLINK=m
> -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
> -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
> -CONFIG_NETFILTER_XT_TARGET_MARK=m
> -CONFIG_NETFILTER_XT_TARGET_NFLOG=m
> -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
> -CONFIG_NETFILTER_XT_TARGET_SECMARK=m
> -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
> -CONFIG_NETFILTER_XT_MATCH_COMMENT=m
> -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
> -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
> -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
> -CONFIG_NETFILTER_XT_MATCH_DCCP=m
> -CONFIG_NETFILTER_XT_MATCH_ESP=m
> -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
> -CONFIG_NETFILTER_XT_MATCH_HELPER=m
> -CONFIG_NETFILTER_XT_MATCH_LENGTH=m
> -CONFIG_NETFILTER_XT_MATCH_LIMIT=m
> -CONFIG_NETFILTER_XT_MATCH_MAC=m
> -CONFIG_NETFILTER_XT_MATCH_MARK=m
> -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
> -CONFIG_NETFILTER_XT_MATCH_POLICY=m
> -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
> -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
> -CONFIG_NETFILTER_XT_MATCH_QUOTA=m
> -CONFIG_NETFILTER_XT_MATCH_REALM=m
> -CONFIG_NETFILTER_XT_MATCH_STATE=m
> -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
> -CONFIG_NETFILTER_XT_MATCH_STRING=m
> -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
> -CONFIG_IP_NF_IPTABLES=m
> -CONFIG_IP_NF_MATCH_AH=m
> -CONFIG_IP_NF_MATCH_ECN=m
> -CONFIG_IP_NF_MATCH_TTL=m
> -CONFIG_IP_NF_FILTER=m
> -CONFIG_IP_NF_TARGET_REJECT=m
> -CONFIG_IP_NF_MANGLE=m
> -CONFIG_IP_NF_TARGET_CLUSTERIP=m
> -CONFIG_IP_NF_TARGET_ECN=m
> -CONFIG_IP_NF_TARGET_TTL=m
> -CONFIG_IP_NF_RAW=m
> -CONFIG_IP_NF_ARPTABLES=m
> -CONFIG_IP_NF_ARPFILTER=m
> -CONFIG_IP_NF_ARP_MANGLE=m
> -CONFIG_IP6_NF_IPTABLES=m
> -CONFIG_IP6_NF_MATCH_AH=m
> -CONFIG_IP6_NF_MATCH_EUI64=m
> -CONFIG_IP6_NF_MATCH_FRAG=m
> -CONFIG_IP6_NF_MATCH_OPTS=m
> -CONFIG_IP6_NF_MATCH_HL=m
> -CONFIG_IP6_NF_MATCH_IPV6HEADER=m
> -CONFIG_IP6_NF_MATCH_MH=m
> -CONFIG_IP6_NF_MATCH_RT=m
> -CONFIG_IP6_NF_TARGET_HL=m
> -CONFIG_IP6_NF_FILTER=m
> -CONFIG_IP6_NF_TARGET_REJECT=m
> -CONFIG_IP6_NF_MANGLE=m
> -CONFIG_IP6_NF_RAW=m
> -CONFIG_DECNET_NF_GRABULATOR=m
> -CONFIG_BRIDGE_NF_EBTABLES=m
> -CONFIG_BRIDGE_EBT_BROUTE=m
> -CONFIG_BRIDGE_EBT_T_FILTER=m
> -CONFIG_BRIDGE_EBT_T_NAT=m
> -CONFIG_BRIDGE_EBT_802_3=m
> -CONFIG_BRIDGE_EBT_AMONG=m
> -CONFIG_BRIDGE_EBT_ARP=m
> -CONFIG_BRIDGE_EBT_IP=m
> -CONFIG_BRIDGE_EBT_LIMIT=m
> -CONFIG_BRIDGE_EBT_MARK=m
> -CONFIG_BRIDGE_EBT_PKTTYPE=m
> -CONFIG_BRIDGE_EBT_STP=m
> -CONFIG_BRIDGE_EBT_VLAN=m
> -CONFIG_BRIDGE_EBT_ARPREPLY=m
> -CONFIG_BRIDGE_EBT_DNAT=m
> -CONFIG_BRIDGE_EBT_MARK_T=m
> -CONFIG_BRIDGE_EBT_REDIRECT=m
> -CONFIG_BRIDGE_EBT_SNAT=m
> -CONFIG_BRIDGE_EBT_LOG=m
> -CONFIG_BRIDGE=m
> -CONFIG_DECNET=m
> -CONFIG_NET_SCHED=y
> -CONFIG_NET_SCH_CBQ=m
> -CONFIG_NET_SCH_HTB=m
> -CONFIG_NET_SCH_HFSC=m
> -CONFIG_NET_SCH_PRIO=m
> -CONFIG_NET_SCH_RED=m
> -CONFIG_NET_SCH_SFQ=m
> -CONFIG_NET_SCH_TEQL=m
> -CONFIG_NET_SCH_TBF=m
> -CONFIG_NET_SCH_GRED=m
> -CONFIG_NET_SCH_DSMARK=m
> -CONFIG_NET_SCH_NETEM=m
> -CONFIG_NET_CLS_BASIC=m
> -CONFIG_NET_CLS_TCINDEX=m
> -CONFIG_NET_CLS_ROUTE4=m
> -CONFIG_NET_CLS_FW=m
> -CONFIG_NET_CLS_U32=m
> -CONFIG_NET_CLS_RSVP=m
> -CONFIG_NET_CLS_RSVP6=m
> -CONFIG_HAMRADIO=y
> -CONFIG_AX25=m
> -CONFIG_NETROM=m
> -CONFIG_ROSE=m
> -CONFIG_MKISS=m
> -CONFIG_6PACK=m
> -CONFIG_BPQETHER=m
> -CONFIG_CONNECTOR=m
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> CONFIG_PARPORT_1284=y
> CONFIG_BLK_DEV_FD=m
> -CONFIG_PARIDE=m
> -CONFIG_PARIDE_PD=m
> -CONFIG_PARIDE_PCD=m
> -CONFIG_PARIDE_PF=m
> -CONFIG_PARIDE_PT=m
> -CONFIG_PARIDE_PG=m
> -CONFIG_PARIDE_ATEN=m
> -CONFIG_PARIDE_BPCK=m
> -CONFIG_PARIDE_BPCK6=m
> -CONFIG_PARIDE_COMM=m
> -CONFIG_PARIDE_DSTR=m
> -CONFIG_PARIDE_FIT2=m
> -CONFIG_PARIDE_FIT3=m
> -CONFIG_PARIDE_EPAT=m
> -CONFIG_PARIDE_EPIA=m
> -CONFIG_PARIDE_FRIQ=m
> -CONFIG_PARIDE_FRPW=m
> -CONFIG_PARIDE_KBIC=m
> -CONFIG_PARIDE_KTTI=m
> -CONFIG_PARIDE_ON20=m
> -CONFIG_PARIDE_ON26=m
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_CRYPTOLOOP=m
> CONFIG_BLK_DEV_NBD=m
> @@ -194,26 +40,10 @@ CONFIG_BLK_DEV_SR=m
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_SCAN_ASYNC=y
> -CONFIG_SCSI_FC_ATTRS=y
> -CONFIG_SCSI_SAS_ATTRS=m
> CONFIG_ISCSI_TCP=m
> CONFIG_SCSI_PPA=m
> CONFIG_SCSI_IMM=m
> CONFIG_JAZZ_ESP=y
> -CONFIG_MD=y
> -CONFIG_BLK_DEV_MD=m
> -CONFIG_MD_LINEAR=m
> -CONFIG_MD_RAID0=m
> -CONFIG_MD_RAID1=m
> -CONFIG_MD_RAID10=m
> -CONFIG_MD_RAID456=m
> -CONFIG_MD_MULTIPATH=m
> -CONFIG_MD_FAULTY=m
> -CONFIG_BLK_DEV_DM=m
> -CONFIG_DM_SNAPSHOT=m
> -CONFIG_DM_MIRROR=m
> -CONFIG_DM_ZERO=m
> -CONFIG_DM_MULTIPATH=m
> CONFIG_NETDEVICES=y
> CONFIG_BONDING=m
> CONFIG_DUMMY=m
> @@ -221,16 +51,6 @@ CONFIG_EQUALIZER=m
> CONFIG_TUN=m
> CONFIG_MIPS_JAZZ_SONIC=y
> CONFIG_NE2000=m
> -CONFIG_PHYLIB=m
> -CONFIG_CICADA_PHY=m
> -CONFIG_DAVICOM_PHY=m
> -CONFIG_LXT_PHY=m
> -CONFIG_MARVELL_PHY=m
> -CONFIG_QSEMI_PHY=m
> -CONFIG_SMSC_PHY=m
> -CONFIG_VITESSE_PHY=m
> -CONFIG_PLIP=m
> -CONFIG_INPUT_FF_MEMLESS=m
> CONFIG_SERIO_PARKBD=m
> CONFIG_SERIO_RAW=m
> CONFIG_VT_HW_CONSOLE_BINDING=y
> @@ -239,10 +59,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> CONFIG_SERIAL_8250_RSA=y
> -CONFIG_PRINTER=m
> -CONFIG_PPDEV=m
> -# CONFIG_HW_RANDOM is not set
> -CONFIG_W1=m
> # CONFIG_HWMON is not set
> CONFIG_EXT2_FS=m
> CONFIG_EXT3_FS=y
> @@ -263,78 +79,8 @@ CONFIG_VFAT_FS=m
> CONFIG_NTFS_FS=m
> CONFIG_PROC_KCORE=y
> CONFIG_TMPFS=y
> -CONFIG_ADFS_FS=m
> -CONFIG_AFFS_FS=m
> -CONFIG_HFS_FS=m
> -CONFIG_BEFS_FS=m
> -CONFIG_BFS_FS=m
> -CONFIG_EFS_FS=m
> -CONFIG_CRAMFS=m
> -CONFIG_VXFS_FS=m
> -CONFIG_MINIX_FS=m
> -CONFIG_HPFS_FS=m
> -CONFIG_QNX4FS_FS=m
> -CONFIG_ROMFS_FS=m
> -CONFIG_SYSV_FS=m
> CONFIG_UFS_FS=m
> CONFIG_NFS_FS=m
> CONFIG_NFSD=m
> CONFIG_NFSD_V3=y
> CONFIG_CIFS=m
> -CONFIG_CODA_FS=m
> -CONFIG_AFS_FS=m
> -CONFIG_NLS_CODEPAGE_437=m
> -CONFIG_NLS_CODEPAGE_737=m
> -CONFIG_NLS_CODEPAGE_775=m
> -CONFIG_NLS_CODEPAGE_850=m
> -CONFIG_NLS_CODEPAGE_852=m
> -CONFIG_NLS_CODEPAGE_855=m
> -CONFIG_NLS_CODEPAGE_857=m
> -CONFIG_NLS_CODEPAGE_860=m
> -CONFIG_NLS_CODEPAGE_861=m
> -CONFIG_NLS_CODEPAGE_862=m
> -CONFIG_NLS_CODEPAGE_863=m
> -CONFIG_NLS_CODEPAGE_864=m
> -CONFIG_NLS_CODEPAGE_865=m
> -CONFIG_NLS_CODEPAGE_866=m
> -CONFIG_NLS_CODEPAGE_869=m
> -CONFIG_NLS_CODEPAGE_936=m
> -CONFIG_NLS_CODEPAGE_950=m
> -CONFIG_NLS_CODEPAGE_932=m
> -CONFIG_NLS_CODEPAGE_949=m
> -CONFIG_NLS_CODEPAGE_874=m
> -CONFIG_NLS_ISO8859_8=m
> -CONFIG_NLS_CODEPAGE_1250=m
> -CONFIG_NLS_CODEPAGE_1251=m
> -CONFIG_NLS_ASCII=m
> -CONFIG_NLS_ISO8859_1=m
> -CONFIG_NLS_ISO8859_2=m
> -CONFIG_NLS_ISO8859_3=m
> -CONFIG_NLS_ISO8859_4=m
> -CONFIG_NLS_ISO8859_5=m
> -CONFIG_NLS_ISO8859_6=m
> -CONFIG_NLS_ISO8859_7=m
> -CONFIG_NLS_ISO8859_9=m
> -CONFIG_NLS_ISO8859_13=m
> -CONFIG_NLS_ISO8859_14=m
> -CONFIG_NLS_ISO8859_15=m
> -CONFIG_NLS_KOI8_R=m
> -CONFIG_NLS_KOI8_U=m
> -CONFIG_NLS_UTF8=m
> -CONFIG_CRYPTO_LRW=m
> -CONFIG_CRYPTO_PCBC=m
> -CONFIG_CRYPTO_HMAC=y
> -CONFIG_CRYPTO_XCBC=m
> -CONFIG_CRYPTO_MICHAEL_MIC=m
> -CONFIG_CRYPTO_TGR192=m
> -CONFIG_CRYPTO_WP512=m
> -CONFIG_CRYPTO_ANUBIS=m
> -CONFIG_CRYPTO_BLOWFISH=m
> -CONFIG_CRYPTO_CAMELLIA=m
> -CONFIG_CRYPTO_CAST6=m
> -CONFIG_CRYPTO_FCRYPT=m
> -CONFIG_CRYPTO_KHAZAD=m
> -CONFIG_CRYPTO_SERPENT=m
> -CONFIG_CRYPTO_TEA=m
> -CONFIG_CRYPTO_TWOFISH=m
> -CONFIG_CRC_CCITT=m
>
Tested-by: Philippe Mathieu-Daudé <[email protected]>
On 2/2/20 3:33 AM, Finn Thain wrote:
> Enable some options for machine type, framebuffer, serial controller and
> ATA interfaces.
>
> This allows a jazz_defconfig build to work on the emulated MIPS Magnum
> machine provided by qemu-system-mips64el.
>
> Signed-off-by: Finn Thain <[email protected]>
> ---
> This patch enables CONFIG_FB_G364. This depends upon the build fix at
> the beginning of this patch series.
> ---
> arch/mips/configs/jazz_defconfig | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
> index b13b2396a8a9..92085df3e367 100644
> --- a/arch/mips/configs/jazz_defconfig
> +++ b/arch/mips/configs/jazz_defconfig
> @@ -1,5 +1,7 @@
> CONFIG_SYSVIPC=y
> CONFIG_POSIX_MQUEUE=y
> +CONFIG_NO_HZ=y
> +CONFIG_HIGH_RES_TIMERS=y
> CONFIG_PREEMPT_VOLUNTARY=y
> CONFIG_BSD_PROCESS_ACCT=y
> CONFIG_LOG_BUF_SHIFT=14
> @@ -8,6 +10,8 @@ CONFIG_EXPERT=y
> CONFIG_SLAB=y
> CONFIG_MACH_JAZZ=y
> CONFIG_OLIVETTI_M700=y
> +CONFIG_MIPS_MAGNUM_4000=y
> +CONFIG_CPU_LITTLE_ENDIAN=y
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODVERSIONS=y
> @@ -25,6 +29,7 @@ CONFIG_INET6_IPCOMP=m
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> CONFIG_PARPORT_1284=y
> +CONFIG_DEVTMPFS=y
> CONFIG_BLK_DEV_FD=m
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_CRYPTOLOOP=m
> @@ -44,6 +49,8 @@ CONFIG_ISCSI_TCP=m
> CONFIG_SCSI_PPA=m
> CONFIG_SCSI_IMM=m
> CONFIG_JAZZ_ESP=y
> +CONFIG_ATA=y
> +CONFIG_PATA_LEGACY=y
> CONFIG_NETDEVICES=y
> CONFIG_BONDING=m
> CONFIG_DUMMY=m
> @@ -54,11 +61,15 @@ CONFIG_NE2000=m
> CONFIG_SERIO_PARKBD=m
> CONFIG_SERIO_RAW=m
> CONFIG_VT_HW_CONSOLE_BINDING=y
> -CONFIG_SERIAL_8250=m
> +CONFIG_SERIAL_8250=y
> +CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> CONFIG_SERIAL_8250_RSA=y
> +CONFIG_FB=y
> +CONFIG_FB_G364=y
> +CONFIG_FRAMEBUFFER_CONSOLE=y
> # CONFIG_HWMON is not set
> CONFIG_EXT2_FS=m
> CONFIG_EXT3_FS=y
>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Tested-by: Philippe Mathieu-Daudé <[email protected]>
On 2/5/20 7:02 PM, Philippe Mathieu-Daudé wrote:
> On Sun, Feb 2, 2020 at 3:41 AM Finn Thain <[email protected]> wrote:
>>
>> This patch resolves these compiler errors and warnings --
>>
>> CC drivers/video/fbdev/g364fb.o
>> drivers/video/fbdev/g364fb.c: In function 'g364fb_cursor':
>> drivers/video/fbdev/g364fb.c:137:9: error: 'x' undeclared (first use in this function)
>> drivers/video/fbdev/g364fb.c:137:9: note: each undeclared identifier is reported only once for each function it appears in
>> drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontwidth' [-Werror=implicit-function-declaration]
>> drivers/video/fbdev/g364fb.c:137:23: error: 'p' undeclared (first use in this function)
>> drivers/video/fbdev/g364fb.c:137:38: error: 'y' undeclared (first use in this function)
>> drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontheight' [-Werror=implicit-function-declaration]
>> drivers/video/fbdev/g364fb.c: In function 'g364fb_init':
>> drivers/video/fbdev/g364fb.c:233:24: error: 'fbvar' undeclared (first use in this function)
>> drivers/video/fbdev/g364fb.c:234:24: error: 'xres' undeclared (first use in this function)
>
> 18 years unnoticed...
>
>> drivers/video/fbdev/g364fb.c:201:14: warning: unused variable 'j' [-Wunused-variable]
>> drivers/video/fbdev/g364fb.c:197:25: warning: unused variable 'pal_ptr' [-Wunused-variable]
>>
>> The MIPS Magnum framebuffer console now works when tested in QEMU.
>>
>> Cc: Bartlomiej Zolnierkiewicz <[email protected]>
>> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
>
> This commit is the kernel 'git origin' import, not the proper reference.
>
> The actual change is between v2.5.17/2.5.19:
> https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/diff/drivers/video/g364fb.c?id=b30e6e183a728923267
> Date: 2002-05-22 07:52:33...
>
> The same commit introduced the changes in g364fb_cursor(), which was
> implemented previous to v2.4.0 so it is hard to follow from there.
>
> Nobody complains during 18 years so I doubt anyone care that
> g364fb_cursor() is removed.
> And by removing it, you improve the kernel quality, so:
> Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
> (Maybe remove the unhelpful 'Fixes' tag).
>
>> Signed-off-by: Finn Thain <[email protected]>
>> ---
>> drivers/video/fbdev/g364fb.c | 29 +++--------------------------
>> 1 file changed, 3 insertions(+), 26 deletions(-)
Note, you need to rebase your series due to:
commit 8a48ac339398f21282985bff16552447d41dcfb2
Author: Jani Nikula <[email protected]>
Date: Tue Dec 3 18:38:50 2019 +0200
video: constify fb ops across all drivers
On Wed, 5 Feb 2020, Philippe Mathieu-Daudé wrote:
> On Sun, Feb 2, 2020 at 3:41 AM Finn Thain <[email protected]> wrote:
> >
> > This patch resolves these compiler errors and warnings --
> >
> > CC drivers/video/fbdev/g364fb.o
> > drivers/video/fbdev/g364fb.c: In function 'g364fb_cursor':
> > drivers/video/fbdev/g364fb.c:137:9: error: 'x' undeclared (first use in this function)
> > drivers/video/fbdev/g364fb.c:137:9: note: each undeclared identifier is reported only once for each function it appears in
> > drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontwidth' [-Werror=implicit-function-declaration]
> > drivers/video/fbdev/g364fb.c:137:23: error: 'p' undeclared (first use in this function)
> > drivers/video/fbdev/g364fb.c:137:38: error: 'y' undeclared (first use in this function)
> > drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontheight' [-Werror=implicit-function-declaration]
> > drivers/video/fbdev/g364fb.c: In function 'g364fb_init':
> > drivers/video/fbdev/g364fb.c:233:24: error: 'fbvar' undeclared (first use in this function)
> > drivers/video/fbdev/g364fb.c:234:24: error: 'xres' undeclared (first use in this function)
>
> 18 years unnoticed...
>
More likely, it was noticed by those without the skills or time to get it
fixed upstream.
Those with the hardware skills and platform knowledge to be affected by an
obscure bug aren't necessarily also capable of fixing a kernel bug,
sending a patch upstream and getting it past code review.
Getting a patch into the Linux kernel is itself a lot of work, unless
you've had years of experience with that constantly changing process
(which varies significantly between subsystems).
Kernel developers are only human and do accidentally introduce breakage in
their work (as contributors) while ironically (as reviewers) they raise
the bar for random fixes from users not versed in the 10000+ lines of
Documentation/process/*.rst
Broken code does not mean zero potential users or zero frustrated users
yet I often hear kernel developers disingenuously claim that it does.
They have an incentive to make that claim and often there's no-one reading
the mailing lists to push back.
> > drivers/video/fbdev/g364fb.c:201:14: warning: unused variable 'j' [-Wunused-variable]
> > drivers/video/fbdev/g364fb.c:197:25: warning: unused variable 'pal_ptr' [-Wunused-variable]
> >
> > The MIPS Magnum framebuffer console now works when tested in QEMU.
> >
> > Cc: Bartlomiej Zolnierkiewicz <[email protected]>
> > Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
>
> This commit is the kernel 'git origin' import, not the proper reference.
>
> The actual change is between v2.5.17/2.5.19:
> https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/diff/drivers/video/g364fb.c?id=b30e6e183a728923267
> Date: 2002-05-22 07:52:33...
>
I think the driver was broken before that point. I didn't compile it, but
it seems that "xres" still has no declaration.
BTW, is it wise to cite a sha-1 that doesn't exist in mainline?
$ git show b30e6e183a728923267
fatal: ambiguous argument 'b30e6e183a728923267': unknown revision or path
not in the working tree.
I'd prefer to use a tag like this,
References: https://git.kernel.org/tglx/history/c/b30e6e183a728923267
FWIW, if you search for "tglx.history" in git log, you can find other
stuff, like "Histroy Tree:" [sic] and "History-tree:". I don't know what
the canonical form is.
> The same commit introduced the changes in g364fb_cursor(), which was
> implemented previous to v2.4.0 so it is hard to follow from there.
>
> Nobody complains during 18 years so I doubt anyone care that
> g364fb_cursor() is removed.
Right. The .fb_cursor method is optional (not all framebuffers have a
hardware cursor).
> And by removing it, you improve the kernel quality, so:
> Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
> (Maybe remove the unhelpful 'Fixes' tag).
>
In the past I've seen other reviewers of other patches say the same thing
("Please remove Fixes: Linux 2.6.12-rc2"). I don't know why.
I used that tag because it indicates that the patch can be backported at
least as far as the stated commit. Certainly the bug exists in Linux
2.6.12-rc2, so the "Fixes" tag is meaningful in that sense.
> > Signed-off-by: Finn Thain <[email protected]>
> > ---
> > drivers/video/fbdev/g364fb.c | 29 +++--------------------------
> > 1 file changed, 3 insertions(+), 26 deletions(-)
> >
> > diff --git a/drivers/video/fbdev/g364fb.c b/drivers/video/fbdev/g364fb.c
> > index 223896cc5f7d..fb26230a3c7b 100644
> > --- a/drivers/video/fbdev/g364fb.c
> > +++ b/drivers/video/fbdev/g364fb.c
> > @@ -108,7 +108,6 @@ static int g364fb_pan_display(struct fb_var_screeninfo *var,
> > static int g364fb_setcolreg(u_int regno, u_int red, u_int green,
> > u_int blue, u_int transp,
> > struct fb_info *info);
> > -static int g364fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
> > static int g364fb_blank(int blank, struct fb_info *info);
> >
> > static struct fb_ops g364fb_ops = {
> > @@ -119,28 +118,8 @@ static struct fb_ops g364fb_ops = {
> > .fb_fillrect = cfb_fillrect,
> > .fb_copyarea = cfb_copyarea,
> > .fb_imageblit = cfb_imageblit,
> > - .fb_cursor = g364fb_cursor,
> > };
> >
> > -int g364fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
> > -{
> > -
> > - switch (cursor->enable) {
> > - case CM_ERASE:
> > - *(unsigned int *) CTLA_REG |= CURS_TOGGLE;
> > - break;
> > -
> > - case CM_MOVE:
> > - case CM_DRAW:
> > - *(unsigned int *) CTLA_REG &= ~CURS_TOGGLE;
> > - *(unsigned int *) CURS_POS_REG =
> > - ((x * fontwidth(p)) << 12) | ((y * fontheight(p)) -
> > - info->var.yoffset);
> > - break;
> > - }
> > - return 0;
> > -}
> > -
> > /*
> > * Pan or Wrap the Display
> > *
> > @@ -194,11 +173,9 @@ static int g364fb_setcolreg(u_int regno, u_int red, u_int green,
> > */
> > int __init g364fb_init(void)
> > {
> > - volatile unsigned int *pal_ptr =
> > - (volatile unsigned int *) CLR_PAL_REG;
> > volatile unsigned int *curs_pal_ptr =
> > (volatile unsigned int *) CURS_PAL_REG;
> > - int mem, i, j;
> > + int mem, i;
> >
> > if (fb_get_options("g364fb", NULL))
> > return -ENODEV;
> > @@ -230,8 +207,8 @@ int __init g364fb_init(void)
> > */
> > *(unsigned short *) (CURS_PAT_REG + 14 * 64) = 0xffff;
> > *(unsigned short *) (CURS_PAT_REG + 15 * 64) = 0xffff;
> > - fb_var.xres_virtual = fbvar.xres;
> > - fb_fix.line_length = (xres / 8) * fb_var.bits_per_pixel;
> > + fb_var.xres_virtual = fb_var.xres;
> > + fb_fix.line_length = fb_var.xres_virtual * fb_var.bits_per_pixel / 8;
> > fb_fix.smem_start = 0x40000000; /* physical address */
> > /* get size of video memory; this is special for the JAZZ hardware */
> > mem = (r4030_read_reg32(JAZZ_R4030_CONFIG) >> 8) & 3;
> > --
> > 2.24.1
> >
>
On Wed, 5 Feb 2020, Philippe Mathieu-Daudé wrote:
> Note, you need to rebase your series due to:
>
> commit 8a48ac339398f21282985bff16552447d41dcfb2
> Author: Jani Nikula <[email protected]>
> Date: Tue Dec 3 18:38:50 2019 +0200
>
> video: constify fb ops across all drivers
>
OK.
Thanks for your review.
On Wed, Feb 5, 2020 at 11:18 PM Finn Thain <[email protected]> wrote:
> On Wed, 5 Feb 2020, Philippe Mathieu-Daudé wrote:
> > On Sun, Feb 2, 2020 at 3:41 AM Finn Thain <[email protected]> wrote:
> > >
> > > This patch resolves these compiler errors and warnings --
> > >
> > > CC drivers/video/fbdev/g364fb.o
> > > drivers/video/fbdev/g364fb.c: In function 'g364fb_cursor':
> > > drivers/video/fbdev/g364fb.c:137:9: error: 'x' undeclared (first use in this function)
> > > drivers/video/fbdev/g364fb.c:137:9: note: each undeclared identifier is reported only once for each function it appears in
> > > drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontwidth' [-Werror=implicit-function-declaration]
> > > drivers/video/fbdev/g364fb.c:137:23: error: 'p' undeclared (first use in this function)
> > > drivers/video/fbdev/g364fb.c:137:38: error: 'y' undeclared (first use in this function)
> > > drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontheight' [-Werror=implicit-function-declaration]
> > > drivers/video/fbdev/g364fb.c: In function 'g364fb_init':
> > > drivers/video/fbdev/g364fb.c:233:24: error: 'fbvar' undeclared (first use in this function)
> > > drivers/video/fbdev/g364fb.c:234:24: error: 'xres' undeclared (first use in this function)
> >
> > 18 years unnoticed...
> >
>
> More likely, it was noticed by those without the skills or time to get it
> fixed upstream.
>
> Those with the hardware skills and platform knowledge to be affected by an
> obscure bug aren't necessarily also capable of fixing a kernel bug,
> sending a patch upstream and getting it past code review.
>
> Getting a patch into the Linux kernel is itself a lot of work, unless
> you've had years of experience with that constantly changing process
> (which varies significantly between subsystems).
I see, I'm not custom to kernel workflow.
> Kernel developers are only human and do accidentally introduce breakage in
> their work (as contributors) while ironically (as reviewers) they raise
> the bar for random fixes from users not versed in the 10000+ lines of
> Documentation/process/*.rst
>
> Broken code does not mean zero potential users or zero frustrated users
> yet I often hear kernel developers disingenuously claim that it does.
> They have an incentive to make that claim and often there's no-one reading
> the mailing lists to push back.
But broken code is also bad example of code. The removed code is still
buried in the git tree.
> > > drivers/video/fbdev/g364fb.c:201:14: warning: unused variable 'j' [-Wunused-variable]
> > > drivers/video/fbdev/g364fb.c:197:25: warning: unused variable 'pal_ptr' [-Wunused-variable]
> > >
> > > The MIPS Magnum framebuffer console now works when tested in QEMU.
> > >
> > > Cc: Bartlomiej Zolnierkiewicz <[email protected]>
> > > Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> >
> > This commit is the kernel 'git origin' import, not the proper reference.
> >
> > The actual change is between v2.5.17/2.5.19:
> > https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/diff/drivers/video/g364fb.c?id=b30e6e183a728923267
> > Date: 2002-05-22 07:52:33...
> >
>
> I think the driver was broken before that point. I didn't compile it, but
> it seems that "xres" still has no declaration.
>
> BTW, is it wise to cite a sha-1 that doesn't exist in mainline?
I didn't want to suggest referencing an external sha1, but rather the full link.
Anyway I later figured out your reference isn't incorrect, this code
was really added in commit 1da177e4c3f4.
Maybe you can use:
Fixes: 1da177e4c3f4 (code modified earlier during v2.5.17-v2.5.19)
Anyway I'm bike-shedding, whichever reference you choose will be fine, even
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
>
> $ git show b30e6e183a728923267
> fatal: ambiguous argument 'b30e6e183a728923267': unknown revision or path
> not in the working tree.
>
> I'd prefer to use a tag like this,
> References: https://git.kernel.org/tglx/history/c/b30e6e183a728923267
>
> FWIW, if you search for "tglx.history" in git log, you can find other
> stuff, like "Histroy Tree:" [sic] and "History-tree:". I don't know what
> the canonical form is.
>
> > The same commit introduced the changes in g364fb_cursor(), which was
> > implemented previous to v2.4.0 so it is hard to follow from there.
> >
> > Nobody complains during 18 years so I doubt anyone care that
> > g364fb_cursor() is removed.
>
> Right. The .fb_cursor method is optional (not all framebuffers have a
> hardware cursor).
>
> > And by removing it, you improve the kernel quality, so:
> > Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
> > (Maybe remove the unhelpful 'Fixes' tag).
> >
>
> In the past I've seen other reviewers of other patches say the same thing
> ("Please remove Fixes: Linux 2.6.12-rc2"). I don't know why.
>
> I used that tag because it indicates that the patch can be backported at
> least as far as the stated commit. Certainly the bug exists in Linux
> 2.6.12-rc2, so the "Fixes" tag is meaningful in that sense.
Yes, agreed.
>
> > > Signed-off-by: Finn Thain <[email protected]>
> > > ---
> > > drivers/video/fbdev/g364fb.c | 29 +++--------------------------
> > > 1 file changed, 3 insertions(+), 26 deletions(-)
> > >
> > > diff --git a/drivers/video/fbdev/g364fb.c b/drivers/video/fbdev/g364fb.c
> > > index 223896cc5f7d..fb26230a3c7b 100644
> > > --- a/drivers/video/fbdev/g364fb.c
> > > +++ b/drivers/video/fbdev/g364fb.c
> > > @@ -108,7 +108,6 @@ static int g364fb_pan_display(struct fb_var_screeninfo *var,
> > > static int g364fb_setcolreg(u_int regno, u_int red, u_int green,
> > > u_int blue, u_int transp,
> > > struct fb_info *info);
> > > -static int g364fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
> > > static int g364fb_blank(int blank, struct fb_info *info);
> > >
> > > static struct fb_ops g364fb_ops = {
> > > @@ -119,28 +118,8 @@ static struct fb_ops g364fb_ops = {
> > > .fb_fillrect = cfb_fillrect,
> > > .fb_copyarea = cfb_copyarea,
> > > .fb_imageblit = cfb_imageblit,
> > > - .fb_cursor = g364fb_cursor,
> > > };
> > >
> > > -int g364fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
> > > -{
> > > -
> > > - switch (cursor->enable) {
> > > - case CM_ERASE:
> > > - *(unsigned int *) CTLA_REG |= CURS_TOGGLE;
> > > - break;
> > > -
> > > - case CM_MOVE:
> > > - case CM_DRAW:
> > > - *(unsigned int *) CTLA_REG &= ~CURS_TOGGLE;
> > > - *(unsigned int *) CURS_POS_REG =
> > > - ((x * fontwidth(p)) << 12) | ((y * fontheight(p)) -
> > > - info->var.yoffset);
> > > - break;
> > > - }
> > > - return 0;
> > > -}
> > > -
> > > /*
> > > * Pan or Wrap the Display
> > > *
> > > @@ -194,11 +173,9 @@ static int g364fb_setcolreg(u_int regno, u_int red, u_int green,
> > > */
> > > int __init g364fb_init(void)
> > > {
> > > - volatile unsigned int *pal_ptr =
> > > - (volatile unsigned int *) CLR_PAL_REG;
> > > volatile unsigned int *curs_pal_ptr =
> > > (volatile unsigned int *) CURS_PAL_REG;
> > > - int mem, i, j;
> > > + int mem, i;
> > >
> > > if (fb_get_options("g364fb", NULL))
> > > return -ENODEV;
> > > @@ -230,8 +207,8 @@ int __init g364fb_init(void)
> > > */
> > > *(unsigned short *) (CURS_PAT_REG + 14 * 64) = 0xffff;
> > > *(unsigned short *) (CURS_PAT_REG + 15 * 64) = 0xffff;
> > > - fb_var.xres_virtual = fbvar.xres;
> > > - fb_fix.line_length = (xres / 8) * fb_var.bits_per_pixel;
> > > + fb_var.xres_virtual = fb_var.xres;
> > > + fb_fix.line_length = fb_var.xres_virtual * fb_var.bits_per_pixel / 8;
> > > fb_fix.smem_start = 0x40000000; /* physical address */
> > > /* get size of video memory; this is special for the JAZZ hardware */
> > > mem = (r4030_read_reg32(JAZZ_R4030_CONFIG) >> 8) & 3;
> > > --
> > > 2.24.1
> > >
> >
On Fri, 7 Feb 2020, Philippe Mathieu-Daudé wrote:
> On Wed, Feb 5, 2020 at 11:18 PM Finn Thain <[email protected]> wrote:
> > On Wed, 5 Feb 2020, Philippe Mathieu-Daudé wrote:
> > > On Sun, Feb 2, 2020 at 3:41 AM Finn Thain <[email protected]> wrote:
> > > >
> > > > This patch resolves these compiler errors and warnings --
> > > >
> > > > CC drivers/video/fbdev/g364fb.o
> > > > drivers/video/fbdev/g364fb.c: In function 'g364fb_cursor':
> > > > drivers/video/fbdev/g364fb.c:137:9: error: 'x' undeclared (first use in this function)
> > > > drivers/video/fbdev/g364fb.c:137:9: note: each undeclared identifier is reported only once for each function it appears in
> > > > drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontwidth' [-Werror=implicit-function-declaration]
> > > > drivers/video/fbdev/g364fb.c:137:23: error: 'p' undeclared (first use in this function)
> > > > drivers/video/fbdev/g364fb.c:137:38: error: 'y' undeclared (first use in this function)
> > > > drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontheight' [-Werror=implicit-function-declaration]
> > > > drivers/video/fbdev/g364fb.c: In function 'g364fb_init':
> > > > drivers/video/fbdev/g364fb.c:233:24: error: 'fbvar' undeclared (first use in this function)
> > > > drivers/video/fbdev/g364fb.c:234:24: error: 'xres' undeclared (first use in this function)
> > >
> > > 18 years unnoticed...
> > >
> >
> > More likely, it was noticed by those without the skills or time to get
> > it fixed upstream.
> >
> > Those with the hardware skills and platform knowledge to be affected
> > by an obscure bug aren't necessarily also capable of fixing a kernel
> > bug, sending a patch upstream and getting it past code review.
> >
> > Getting a patch into the Linux kernel is itself a lot of work, unless
> > you've had years of experience with that constantly changing process
> > (which varies significantly between subsystems).
>
> I see, I'm not custom to kernel workflow.
>
> > Kernel developers are only human and do accidentally introduce
> > breakage in their work (as contributors) while ironically (as
> > reviewers) they raise the bar for random fixes from users not versed
> > in the 10000+ lines of Documentation/process/*.rst
> >
> > Broken code does not mean zero potential users or zero frustrated
> > users yet I often hear kernel developers disingenuously claim that it
> > does. They have an incentive to make that claim and often there's
> > no-one reading the mailing lists to push back.
>
> But broken code is also bad example of code. The removed code is still
> buried in the git tree.
>
Some bugs may never be noticed and yet everyone assumes that they are
present (hence "defence in depth" and all of the complexity that entails).
My complaint was really about broken code being used as a rationale to
remove additional code (whatever its quality).
For example, some maintainers would say, "18 years unnoticed... don't stop
at g364fb_cursor(), remove the entire driver".