> > $ dmesg
> > Linux version 2.6.25.test (dawitbro@fileserver) (gcc version 4.3.1 (Debian
> 4.3.1-2) ) #1 SMP Wed Aug 20 23:31:39 EDT 2008
> > Command line: root=/dev/hda1 ro video=uvesafb:1280x1024-16@60,mtrr:3
> fbcon=scrollback:256k,font:10x18 debug
> > BIOS-provided physical RAM map:
> > BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> > BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> > BIOS-e820: 0000000000100000 - 0000000077fe0000 (usable)
> > BIOS-e820: 0000000077fe0000 - 0000000077fe3000 (ACPI NVS)
> > BIOS-e820: 0000000077fe3000 - 0000000077ff0000 (ACPI data)
> > BIOS-e820: 0000000077ff0000 - 0000000078000000 (reserved)
> > BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> > Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> > Entering add_active_range(0, 256, 491488) 1 entries of 3200 used
> > end_pfn_map = 1048576
> > DMI 2.5 present.
> > ACPI: RSDP 000F7B80, 0024 (r2 RS690 )
> > ACPI: RSDT 77FE3040, 0038 (r1 RS690 AWRDACPI 42302E31 AWRD 0)
> > ACPI: FACP 77FE30C0, 0074 (r1 RS690 AWRDACPI 42302E31 AWRD 0)
> > ACPI: DSDT 77FE3180, 4B0B (r1 RS690 AWRDACPI 1000 MSFT 3000000)
> > ACPI: FACS 77FE0000, 0040
> > ACPI: SSDT 77FE7DC0, 028A (r1 PTLTD POWERNOW 1 LTP 1)
> > ACPI: HPET 77FE80C0, 0038 (r1 RS690 AWRDACPI 42302E31 AWRD 98)
> > ACPI: MCFG 77FE8140, 003C (r1 RS690 AWRDACPI 42302E31 AWRD 0)
> > ACPI: APIC 77FE7D00, 0068 (r1 RS690 AWRDACPI 42302E31 AWRD 0)
> > No NUMA configuration found
> > Faking a node at 0000000000000000-0000000077fe0000
> > Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> > Entering add_active_range(0, 256, 491488) 1 entries of 3200 used
> > Bootmem setup node 0 0000000000000000-0000000077fe0000
> > NODE_DATA [000000000000c000 - 0000000000012fff]
> > bootmap [0000000000013000 - 0000000000021fff] pages f
> > early res: 0 [0-fff] BIOS data page
> > early res: 1 [6000-7fff] SMP_TRAMPOLINE
> > early res: 2 [200000-7b5387] TEXT DATA BSS
> > early res: 3 [9f000-aefff] EBDA
> > early res: 4 [8000-bfff] PGTABLE
> > [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
> > [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
> > [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
> > [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
> > [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
> > [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
> > [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
> > [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
> > [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
> > [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
> > [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
> > [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
> > [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
> > [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
> > Zone PFN ranges:
> > DMA 0 -> 4096
> > DMA32 4096 -> 1048576
> > Normal 1048576 -> 1048576
> > Movable zone start PFN for each node
> > early_node_map[2] active PFN ranges
> > 0: 0 -> 159
> > 0: 256 -> 491488
> > On node 0 totalpages: 491391
> > DMA zone: 56 pages used for memmap
> > DMA zone: 1486 pages reserved
> > DMA zone: 2457 pages, LIFO batch:0
> > DMA32 zone: 6663 pages used for memmap
> > DMA32 zone: 480729 pages, LIFO batch:31
> > Normal zone: 0 pages used for memmap
> > Movable zone: 0 pages used for memmap
> > ATI board detected. Disabling timer routing over 8254.
> > Detected use of extended apic ids on hypertransport bus
> > ACPI: PM-Timer IO Port: 0x4008
> > ACPI: Local APIC address 0xfee00000
> > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> > Processor #0 (Bootup-CPU)
> > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> > Processor #1
> > ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> > ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> > IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
> > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> > ACPI: IRQ0 used by override.
> > ACPI: IRQ2 used by override.
> > ACPI: IRQ9 used by override.
> > Setting APIC routing to flat
> > ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> > Using ACPI (MADT) for SMP configuration information
> > insert_resource: parent: (PCI mem) [0, ffffffffffffffff], new: (Local APIC)
> [fee00000, fee00fff]
> > insert_resource: good with request direct parent: (PCI mem) [0,
> ffffffffffffffff], new: (Local APIC) [fee00000, fee00fff]
> > request_resource: root: (PCI mem) [0, ffffffffffffffff], new: (System RAM) [0,
> 9f3ff] conflict 0
> > request_resource: root: (System RAM) [0, 9f3ff], new: (Kernel code) [200000,
> 557241] conflict 1
> > request_resource: root: (System RAM) [0, 9f3ff], new: (Kernel data) [557242,
> 6b4397] conflict 1
> > request_resource: root: (System RAM) [0, 9f3ff], new: (Kernel bss) [736000,
> 7b5387] conflict 1
> > request_resource: root: (PCI mem) [0, ffffffffffffffff], new: (reserved)
> [9f400, 9ffff] conflict 0
> > request_resource: root: (PCI mem) [0, ffffffffffffffff], new: (reserved)
> [f0000, fffff] conflict 0
> > request_resource: root: (PCI mem) [0, ffffffffffffffff], new: (System RAM)
> [100000, 77fdffff] conflict 0
> > request_resource: root: (System RAM) [100000, 77fdffff], new: (Kernel code)
> [200000, 557241] conflict 0
> > request_resource: root: (System RAM) [100000, 77fdffff], new: (Kernel data)
> [557242, 6b4397] conflict 0
> > request_resource: root: (System RAM) [100000, 77fdffff], new: (Kernel bss)
> [736000, 7b5387] conflict 0
> > request_resource: root: (PCI mem) [0, ffffffffffffffff], new: (ACPI
> Non-volatile Storage) [77fe0000, 77fe2fff] conflict 0
> > request_resource: root: (PCI mem) [0, ffffffffffffffff], new: (ACPI Tables)
> [77fe3000, 77feffff] conflict 0
> > request_resource: root: (PCI mem) [0, ffffffffffffffff], new: (reserved)
> [77ff0000, 77ffffff] conflict 0
> > request_resource: root: (PCI mem) [0, ffffffffffffffff], new: (reserved)
> [e0000000, efffffff] conflict 0
> > request_resource: root: (PCI mem) [0, ffffffffffffffff], new: (reserved)
> [fec00000, ffffffff] conflict 1
> ..
> > insert_resource: parent: (PCI mem) [0, ffffffffffffffff], new: (HPET 0)
> [fed00000, fed003ff]
> > insert_resource: first: (0000:00:14.0) [fed00000, fed003ff], new: (HPET 0)
> [fed00000, fed003ff]
> > insert_resource: direct parent: (PCI mem) [0, ffffffffffffffff], new: (HPET
> 0) [fed00000, fed003ff]
> > insert_resource: child: (0000:00:14.0) [fed00000, fed003ff], new: (HPET 0)
> [fed00000, fed003ff]
> > insert_resource: parent: (PCI mem) [0, ffffffffffffffff], new: (IOAPIC 0)
> [fec00000, fec00fff]
> > insert_resource: first: (pnp 00:0d) [fec00000, fec00fff], new: (IOAPIC 0)
> [fec00000, fec00fff]
> > insert_resource: direct parent: (PCI mem) [0, ffffffffffffffff], new: (IOAPIC
> 0) [fec00000, fec00fff]
> > insert_resource: child: (pnp 00:0d) [fec00000, fec00fff], new: (IOAPIC 0)
> [fec00000, fec00fff]
>
> so old kernel doesn't register [fec00000, ffffffff] from e820 as
> reserved. because lapic address register at first.
Well, at least it tried! ;)
request_resource: root: (PCI mem) [0, ffffffffffffffff], new: (reserved) [fec00000, ffffffff] conflict 1
> lapic, ioapic, and hpet0 addr all should be children of [fec00000,
> fffffffff] as reserved from e820.
I can see that the resources are not recorded in the tree properly, but
this kernel was still able to boot without hanging. Is it enough that
the memory region was already marked as busy, or do these resource
structures need to be in the tree for other purposes?
> please use my print out patch with current kernel.
On the suggestion of Ilpo J?rvinen, I tried to delay the printk's long
enough to see them using CONFIG_BOOT_PRINTK_DELAY. Unfortunately, I was
stung by what the help text for that option warns of: the
CONFIG_BOOT_PRINTK_DELAY option can cause the kernel to hang on SMP
machines.
That is exactly what happens: the kernel hangs pretty much immediately,
with only about a half dozen lines printed.
I did try my own suggestion: change KERN_DEBUG to KERN_WARNING in your patch,
and boot with "loglevel=5". This worked, and almost the only lines printed
were those from your patch. However, without the printk delay everything
just scrolled away too fast to read... until the kernel hung.
I believe I can find a workaround to print this output in a more compact way...
your formatting takes up 2 lines for each printk. However, I am busy this
morning and I have to work this afternoon. I may not be able to provide
the entire output until tonight or tomorrow.
For now, I can only report that the last lines printed were the same as
these from the working kernel's 'dmesg' output:
========
request_resource: root: (PCI IO) [0, ffff], new: (0000:00:14.1) [3f6, 3f6] conflict 0
request_resource: root: (PCI IO) [0, ffff], new: (0000:00:14.1) [170, 177] conflict 0
request_resource: root: (PCI IO) [0, ffff], new: (0000:00:14.1) [376, 376] conflict 0
request_resource: root: (PCI IO) [0, ffff], new: (0000:00:14.1) [f900, f90f] conflict 0
request_resource: root: (PCI mem) [0, ffffffffffffffff], new: (0000:00:14.2) [fe020000, fe023fff] conflict 0
request_resource: root: (PCI Bus #01) [d8000000, dfffffff], new: (0000:01:05.0) [d8000000, dfffffff] conflict 0
request_resource: root: (PCI Bus #01) [fdd00000, fdefffff], new: (0000:01:05.0) [fdee0000, fdeeffff] conflict 0
request_resource: root: (PCI Bus #01) [e000, efff], new: (0000:01:05.0) [ee00, eeff] conflict 0
request_resource: root: (PCI Bus #01) [fdd00000, fdefffff], new: (0000:01:05.0) [fdd00000, fddfffff] conflict 0
request_resource: root: (PCI Bus #01) [fdd00000, fdefffff], new: (0000:01:05.2) [fdefc000, fdefffff] conflict 0
request_resource: root: (PCI Bus #02) [d000, dfff], new: (0000:02:05.0) [de00, deff] conflict 0
request_resource: root: (PCI Bus #02) [fdc00000, fdcfffff], new: (0000:02:05.0) [fdcff000, fdcff0ff] conflict 0
========
The only differences were trivial: the "PCI Bus" strings now print in a
different format, like "PCI Bus 0000:01".
I will try to provide the entire output tonight or tomorrow. It will be
difficult, though: it looks like I have to try to fit the info from about
60 of the printk's in your patch onto the 80x25 VGA screen, and still
make it understandable enough to be useful.
BTW, in a previous message, I recursed the iomem_resource tree and printed
all of the elements that end up there. This was not sufficient, right? You
also want to see what is rejected and not stored in the tree, which your
patch's printks do show?
Thanks,
Dave W.
On Thu, Aug 21, 2008 at 7:09 AM, David Witbrodt <[email protected]> wrote:
>
> I will try to provide the entire output tonight or tomorrow. It will be
> difficult, though: it looks like I have to try to fit the info from about
> 60 of the printk's in your patch onto the 80x25 VGA screen, and still
> make it understandable enough to be useful.
>
with hpet=disable?
YH