This is the start of the stable review cycle for the 3.4.46 release.
There are 50 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun May 19 21:37:09 UTC 2013.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.46-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 3.4.46-rc1
Oleg Nesterov <[email protected]>
usermodehelper: check subprocess_info->path != NULL
Kees Cook <[email protected]>
drm/radeon: check incoming cliprects pointer
Benjamin LaHaise <[email protected]>
ipmi: ipmi_devintf: compat_ioctl method fails to take ipmi_mutex
Chen Gang <[email protected]>
drivers/char/ipmi: memcpy, need additional 2 bytes to avoid memory overflow
Lan Tianyu <[email protected]>
ACPI / EC: Restart transaction even when the IBF flag set
Shlomo Pongratz <[email protected]>
iscsi-target: Fix processing of OOO commands
Wei Yongjun <[email protected]>
drivers/rtc/rtc-pcf2123.c: fix error return code in pcf2123_probe()
Philipp Reisner <[email protected]>
drbd: fix for deadlock when using automatic split-brain-recovery
Francois Romieu <[email protected]>
r8169: fix vlan tag read ordering.
Naoya Horiguchi <[email protected]>
hugetlbfs: fix mmap failure in unaligned size request
Tomoya MORINAGA <[email protected]>
pch_dma: Use GFP_ATOMIC because called from interrupt context
Mike Snitzer <[email protected]>
dm thin: do not set discard_zeroes_data
Cong Wang <[email protected]>
xfrm6: release dev before returning error
Eric Dumazet <[email protected]>
ipv6: do not clear pinet6 field
Jiri Pirko <[email protected]>
macvlan: fix passthru mode race between dev removal and rx path
Josh Boyer <[email protected]>
if_cablemodem.h: Add parenthesis around ioctl macros
Sergei Shtylyov <[email protected]>
3c59x: fix PCI resource management
Sergei Shtylyov <[email protected]>
3c59x: fix freeing nonexistent resource on driver unload
Daniel Borkmann <[email protected]>
packet: tpacket_v3: do not trigger bug() on wrong header status
stephen hemminger <[email protected]>
bridge: fix race with topology change timer
Bjørn Mork <[email protected]>
net: vlan,ethtool: netdev_features_t is more than 32 bit
Patrick McHardy <[email protected]>
net: use netdev_features_t in skb_needs_linearize()
Jamal Hadi Salim <[email protected]>
net_sched: act_ipt forward compat with xtables
Matthew Whitehead <[email protected]>
3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
Ben Hutchings <[email protected]>
sfc: Fix naming of MTD partitions for FPGA bitfiles
Eric Dumazet <[email protected]>
tcp: force a dst refcount when prequeue packet
Bjørn Mork <[email protected]>
net: qmi_wwan: prevent duplicate mac address on link (firmware bug workaround)
Bjørn Mork <[email protected]>
net: qmi_wwan: fixup destination address (firmware bug workaround)
Bjørn Mork <[email protected]>
net: qmi_wwan: fixup missing ethernet header (firmware bug workaround)
Daniel Vetter <[email protected]>
drm/mm: fix dump table BUG
Thommy Jakobsson <[email protected]>
B43: Handle DMA RX descriptor underrun
Daniel Drake <[email protected]>
mwifiex: fix setting of multicast filter
Bing Zhao <[email protected]>
mwifiex: clear is_suspended flag when interrupt is received early
Felix Fietkau <[email protected]>
ath9k: fix key allocation error handling for powersave keys
Robert Jennings <[email protected]>
powerpc: Bring all threads online prior to migration/hibernation
Lachlan McIlroy <[email protected]>
ext4: limit group search loop for non-extent files
Steven Rostedt (Red Hat) <[email protected]>
tracing: Fix leaks of filter preds
Thomas Gleixner <[email protected]>
tick: Cleanup NOHZ per cpu data on cpu down
Tirupathi Reddy <[email protected]>
timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE
Anton Blanchard <[email protected]>
audit: Syscall rules are not applied to existing processes on non-x86
James Bottomley <[email protected]>
SCSI: sd: fix array cache flushing bug causing performance problems
Konrad Rzeszutek Wilk <[email protected]>
xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
Shuah Khan <[email protected]>
hp_accel: Ignore the error from lis3lv02d_poweron() at resume
J. Bruce Fields <[email protected]>
nfsd4: don't allow owner override on 4.1 CLAIM_FH opens
Wei Yongjun <[email protected]>
dm snapshot: fix error return code in snapshot_ctr
Wang YanQing <[email protected]>
ALSA: HDA: Fix Oops caused by dereference NULL pointer
Bob Moore <[email protected]>
ACPICA: Fix possible buffer overflow during a field unit read operation
Dan Carpenter <[email protected]>
ASoC: wm8994: missing break in wm8994_aif3_hw_params()
Aaro Koskinen <[email protected]>
ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
Gleb Natapov <[email protected]>
KVM: VMX: fix halt emulation while emulating invalid guest sate
-------------
Diffstat:
Makefile | 4 +-
arch/arm/mach-omap2/board-rx51-peripherals.c | 4 +-
arch/powerpc/include/asm/rtas.h | 2 +
arch/powerpc/kernel/rtas.c | 113 +++++++++++++++++++++++++++
arch/powerpc/platforms/pseries/suspend.c | 22 ++++++
arch/x86/kvm/vmx.c | 6 ++
arch/x86/xen/enlighten.c | 15 ++++
drivers/acpi/acpica/exfldio.c | 14 +++-
drivers/acpi/ec.c | 4 +-
drivers/block/drbd/drbd_receiver.c | 1 -
drivers/char/ipmi/ipmi_bt_sm.c | 4 +-
drivers/char/ipmi/ipmi_devintf.c | 14 +++-
drivers/dma/pch_dma.c | 2 +-
drivers/gpu/drm/drm_mm.c | 34 ++++----
drivers/gpu/drm/radeon/r300_cmdbuf.c | 2 +-
drivers/md/dm-snap.c | 1 +
drivers/md/dm-thin.c | 2 +-
drivers/net/ethernet/3com/3c509.c | 2 +
drivers/net/ethernet/3com/3c59x.c | 27 ++++---
drivers/net/ethernet/realtek/r8169.c | 14 ++--
drivers/net/ethernet/sfc/mcdi.c | 2 +-
drivers/net/macvlan.c | 7 +-
drivers/net/usb/qmi_wwan.c | 101 ++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/main.c | 6 +-
drivers/net/wireless/b43/dma.c | 19 +++++
drivers/net/wireless/b43/dma.h | 4 +-
drivers/net/wireless/b43/main.c | 43 +++++-----
drivers/net/wireless/mwifiex/cmdevt.c | 1 +
drivers/net/wireless/mwifiex/sta_ioctl.c | 21 ++---
drivers/platform/x86/hp_accel.c | 3 +-
drivers/rtc/rtc-pcf2123.c | 1 +
drivers/scsi/sd.c | 20 +++++
drivers/scsi/sd.h | 1 +
drivers/target/iscsi/iscsi_target_erl1.c | 7 +-
fs/ext4/mballoc.c | 6 +-
fs/hugetlbfs/inode.c | 20 ++---
fs/nfsd/nfs4proc.c | 15 +++-
include/linux/audit.h | 2 +-
include/linux/hugetlb.h | 9 +--
include/linux/if_cablemodem.h | 12 +--
include/linux/rculist.h | 17 ++++
include/net/sock.h | 12 +++
include/net/tcp.h | 1 +
ipc/shm.c | 4 +-
kernel/kmod.c | 5 ++
kernel/time/tick-sched.c | 2 +-
kernel/timer.c | 2 +-
kernel/trace/trace_events_filter.c | 4 +
mm/mmap.c | 6 +-
net/8021q/vlan_dev.c | 2 +-
net/bridge/br_stp_timer.c | 2 +-
net/core/dev.c | 2 +-
net/core/ethtool.c | 2 +-
net/core/sock.c | 12 ---
net/ipv6/tcp_ipv6.c | 12 +++
net/ipv6/udp.c | 13 ++-
net/ipv6/udp_impl.h | 2 +
net/ipv6/udplite.c | 2 +-
net/ipv6/xfrm6_policy.c | 4 +-
net/packet/af_packet.c | 54 +++++--------
net/sched/act_ipt.c | 33 +++++++-
sound/pci/hda/hda_codec.c | 3 +
sound/soc/codecs/wm8994.c | 1 +
63 files changed, 597 insertions(+), 187 deletions(-)
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konrad Rzeszutek Wilk <[email protected]>
commit 7f1fc268c47491fd5e63548f6415fc8604e13003 upstream.
If a user did:
echo 0 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu1/online
we would (this a build with DEBUG enabled) get to:
smpboot: ++++++++++++++++++++=_---CPU UP 1
.. snip..
smpboot: Stack at about ffff880074c0ff44
smpboot: CPU1: has booted.
and hang. The RCU mechanism would kick in an try to IPI the CPU1
but the IPIs (and all other interrupts) would never arrive at the
CPU1. At first glance at least. A bit digging in the hypervisor
trace shows that (using xenanalyze):
[vla] d4v1 vec 243 injecting
0.043163027 --|x d4v1 intr_window vec 243 src 5(vector) intr f3
] 0.043163639 --|x d4v1 vmentry cycles 1468
] 0.043164913 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254
0.043164913 --|x d4v1 inj_virq vec 243 real
[vla] d4v1 vec 243 injecting
0.043164913 --|x d4v1 intr_window vec 243 src 5(vector) intr f3
] 0.043165526 --|x d4v1 vmentry cycles 1472
] 0.043166800 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254
0.043166800 --|x d4v1 inj_virq vec 243 real
[vla] d4v1 vec 243 injecting
there is a pending event (subsequent debugging shows it is the IPI
from the VCPU0 when smpboot.c on VCPU1 has done
"set_cpu_online(smp_processor_id(), true)") and the guest VCPU1 is
interrupted with the callback IPI (0xf3 aka 243) which ends up calling
__xen_evtchn_do_upcall.
The __xen_evtchn_do_upcall seems to do *something* but not acknowledge
the pending events. And the moment the guest does a 'cli' (that is the
ffffffff81673254 in the log above) the hypervisor is invoked again to
inject the IPI (0xf3) to tell the guest it has pending interrupts.
This repeats itself forever.
The culprit was the per_cpu(xen_vcpu, cpu) pointer. At the bootup
we set each per_cpu(xen_vcpu, cpu) to point to the
shared_info->vcpu_info[vcpu] but later on use the VCPUOP_register_vcpu_info
to register per-CPU structures (xen_vcpu_setup).
This is used to allow events for more than 32 VCPUs and for performance
optimizations reasons.
When the user performs the VCPU hotplug we end up calling the
the xen_vcpu_setup once more. We make the hypercall which returns
-EINVAL as it does not allow multiple registration calls (and
already has re-assigned where the events are being set). We pick
the fallback case and set per_cpu(xen_vcpu, cpu) to point to the
shared_info->vcpu_info[vcpu] (which is a good fallback during bootup).
However the hypervisor is still setting events in the register
per-cpu structure (per_cpu(xen_vcpu_info, cpu)).
As such when the events are set by the hypervisor (such as timer one),
and when we iterate in __xen_evtchn_do_upcall we end up reading stale
events from the shared_info->vcpu_info[vcpu] instead of the
per_cpu(xen_vcpu_info, cpu) structures. Hence we never acknowledge the
events that the hypervisor has set and the hypervisor keeps on reminding
us to ack the events which we never do.
The fix is simple. Don't on the second time when xen_vcpu_setup is
called over-write the per_cpu(xen_vcpu, cpu) if it points to
per_cpu(xen_vcpu_info).
Acked-by: Stefano Stabellini <[email protected]>
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/xen/enlighten.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -139,6 +139,21 @@ static void xen_vcpu_setup(int cpu)
BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info);
+ /*
+ * This path is called twice on PVHVM - first during bootup via
+ * smp_init -> xen_hvm_cpu_notify, and then if the VCPU is being
+ * hotplugged: cpu_up -> xen_hvm_cpu_notify.
+ * As we can only do the VCPUOP_register_vcpu_info once lets
+ * not over-write its result.
+ *
+ * For PV it is called during restore (xen_vcpu_restore) and bootup
+ * (xen_setup_vcpu_info_placement). The hotplug mechanism does not
+ * use this function.
+ */
+ if (xen_hvm_domain()) {
+ if (per_cpu(xen_vcpu, cpu) == &per_cpu(xen_vcpu_info, cpu))
+ return;
+ }
if (cpu < MAX_VIRT_CPUS)
per_cpu(xen_vcpu,cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <[email protected]>
commit 60705c89460fdc7227f2d153b68b3f34814738a4 upstream.
Special preds are created when folding a series of preds that
can be done in serial. These are allocated in an ops field of
the pred structure. But they were never freed, causing memory
leaks.
This was discovered using the kmemleak checker:
unreferenced object 0xffff8800797fd5e0 (size 32):
comm "swapper/0", pid 1, jiffies 4294690605 (age 104.608s)
hex dump (first 32 bytes):
00 00 01 00 03 00 05 00 07 00 09 00 0b 00 0d 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff814b52af>] kmemleak_alloc+0x73/0x98
[<ffffffff8111ff84>] kmemleak_alloc_recursive.constprop.42+0x16/0x18
[<ffffffff81120e68>] __kmalloc+0xd7/0x125
[<ffffffff810d47eb>] kcalloc.constprop.24+0x2d/0x2f
[<ffffffff810d4896>] fold_pred_tree_cb+0xa9/0xf4
[<ffffffff810d3781>] walk_pred_tree+0x47/0xcc
[<ffffffff810d5030>] replace_preds.isra.20+0x6f8/0x72f
[<ffffffff810d50b5>] create_filter+0x4e/0x8b
[<ffffffff81b1c30d>] ftrace_test_event_filter+0x5a/0x155
[<ffffffff8100028d>] do_one_initcall+0xa0/0x137
[<ffffffff81afbedf>] kernel_init_freeable+0x14d/0x1dc
[<ffffffff814b24b7>] kernel_init+0xe/0xdb
[<ffffffff814d539c>] ret_from_fork+0x7c/0xb0
[<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Steven Rostedt <[email protected]>
Cc: Tom Zanussi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_events_filter.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -777,7 +777,11 @@ static int filter_set_pred(struct event_
static void __free_preds(struct event_filter *filter)
{
+ int i;
+
if (filter->preds) {
+ for (i = 0; i < filter->n_preds; i++)
+ kfree(filter->preds[i].ops);
kfree(filter->preds);
filter->preds = NULL;
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Vetter <[email protected]>
commit 3a359f0b21ab218c1bf7a6a1b638b6fd143d0b99 upstream.
In
commit 9e8944ab564f2e3dde90a518cd32048c58918608
Author: Chris Wilson <[email protected]>
Date: Thu Nov 15 11:32:17 2012 +0000
drm: Introduce an iterator over holes in the drm_mm range manager
helpers and iterators for hole handling have been introduced with some
debug BUG_ONs sprinkled over. Unfortunately this broke the mm dumper
which unconditionally tried to compute the size of the very first
hole.
While at it unify the code a bit with the hole dumping in the loop.
v2: Extract a hole dump helper.
Reported-by: Christopher Harvey <[email protected]>
Cc: Christopher Harvey <[email protected]>
Cc: Dave Airlie <[email protected]>
Cc: Chris Wilson <[email protected]>
Acked-by: Dave Airlie <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_mm.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -680,33 +680,35 @@ void drm_mm_debug_table(struct drm_mm *m
EXPORT_SYMBOL(drm_mm_debug_table);
#if defined(CONFIG_DEBUG_FS)
-int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm)
+static unsigned long drm_mm_dump_hole(struct seq_file *m, struct drm_mm_node *entry)
{
- struct drm_mm_node *entry;
- unsigned long total_used = 0, total_free = 0, total = 0;
unsigned long hole_start, hole_end, hole_size;
- hole_start = drm_mm_hole_node_start(&mm->head_node);
- hole_end = drm_mm_hole_node_end(&mm->head_node);
- hole_size = hole_end - hole_start;
- if (hole_size)
+ if (entry->hole_follows) {
+ hole_start = drm_mm_hole_node_start(entry);
+ hole_end = drm_mm_hole_node_end(entry);
+ hole_size = hole_end - hole_start;
seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: free\n",
hole_start, hole_end, hole_size);
- total_free += hole_size;
+ return hole_size;
+ }
+
+ return 0;
+}
+
+int drm_mm_dump_table(struct seq_file *m, struct drm_mm *mm)
+{
+ struct drm_mm_node *entry;
+ unsigned long total_used = 0, total_free = 0, total = 0;
+
+ total_free += drm_mm_dump_hole(m, &mm->head_node);
drm_mm_for_each_node(entry, mm) {
seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: used\n",
entry->start, entry->start + entry->size,
entry->size);
total_used += entry->size;
- if (entry->hole_follows) {
- hole_start = drm_mm_hole_node_start(entry);
- hole_end = drm_mm_hole_node_end(entry);
- hole_size = hole_end - hole_start;
- seq_printf(m, "0x%08lx-0x%08lx: 0x%08lx: free\n",
- hole_start, hole_end, hole_size);
- total_free += hole_size;
- }
+ total_free += drm_mm_dump_hole(m, entry);
}
total = total_free + total_used;
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen Gang <[email protected]>
commit a5f2b3d6a738e7d4180012fe7b541172f8c8dcea upstream.
When calling memcpy, read_data and write_data need additional 2 bytes.
write_data:
for checking: "if (size > IPMI_MAX_MSG_LENGTH)"
for operating: "memcpy(bt->write_data + 3, data + 1, size - 1)"
read_data:
for checking: "if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH)"
for operating: "memcpy(data + 2, bt->read_data + 4, msg_len - 2)"
Signed-off-by: Chen Gang <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/ipmi/ipmi_bt_sm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -95,9 +95,9 @@ struct si_sm_data {
enum bt_states state;
unsigned char seq; /* BT sequence number */
struct si_sm_io *io;
- unsigned char write_data[IPMI_MAX_MSG_LENGTH];
+ unsigned char write_data[IPMI_MAX_MSG_LENGTH + 2]; /* +2 for memcpy */
int write_count;
- unsigned char read_data[IPMI_MAX_MSG_LENGTH];
+ unsigned char read_data[IPMI_MAX_MSG_LENGTH + 2]; /* +2 for memcpy */
int read_count;
int truncated;
long timeout; /* microseconds countdown */
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lan Tianyu <[email protected]>
commit 28fe5c825f8e15744d04c7c1b8df197950923ecd upstream.
The EC driver works abnormally with IBF flag always set.
IBF means "The host has written a byte of data to the command
or data port, but the embedded controller has not yet read it".
If IBF is set in the EC status and not cleared, this will cause
all subsequent EC requests to fail with a timeout error.
Change the EC driver so that it doesn't refuse to restart a
transaction if IBF is set in the status. Also increase the
number of transaction restarts to 5, as it turns out that 2
is not sufficient in some cases.
This bug happens on several different machines (Asus V1S,
Dell Latitude E6530, Samsung R719, Acer Aspire 5930G,
Sony Vaio SR19VN and others).
[rjw: Changelog]
References: https://bugzilla.kernel.org/show_bug.cgi?id=14733
References: https://bugzilla.kernel.org/show_bug.cgi?id=15560
References: https://bugzilla.kernel.org/show_bug.cgi?id=15946
References: https://bugzilla.kernel.org/show_bug.cgi?id=42945
References: https://bugzilla.kernel.org/show_bug.cgi?id=48221
Signed-off-by: Lan Tianyu <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/ec.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -217,7 +217,7 @@ static int ec_check_sci_sync(struct acpi
static int ec_poll(struct acpi_ec *ec)
{
unsigned long flags;
- int repeat = 2; /* number of command restarts */
+ int repeat = 5; /* number of command restarts */
while (repeat--) {
unsigned long delay = jiffies +
msecs_to_jiffies(ec_delay);
@@ -235,8 +235,6 @@ static int ec_poll(struct acpi_ec *ec)
}
advance_transaction(ec, acpi_ec_read_status(ec));
} while (time_before(jiffies, delay));
- if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)
- break;
pr_debug(PREFIX "controller reset, restart transaction\n");
spin_lock_irqsave(&ec->curr_lock, flags);
start_transaction(ec);
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shlomo Pongratz <[email protected]>
commit 3eccfdb01da58fbd0f789ae6ca61cee3769e26de upstream.
Fix two issues in OOO commands processing done at iscsit_attach_ooo_cmdsn.
Handle command serial numbers wrap around by using iscsi_sna_lt and not regular comparisson.
The routine iterates until it finds an entry whose serial number is greater than the serial number of
the new one, thus the new entry should be inserted before that entry and not after.
Signed-off-by: Shlomo Pongratz <[email protected]>
Signed-off-by: Nicholas Bellinger <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/target/iscsi/iscsi_target_erl1.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/target/iscsi/iscsi_target_erl1.c
+++ b/drivers/target/iscsi/iscsi_target_erl1.c
@@ -824,7 +824,7 @@ static int iscsit_attach_ooo_cmdsn(
/*
* CmdSN is greater than the tail of the list.
*/
- if (ooo_tail->cmdsn < ooo_cmdsn->cmdsn)
+ if (iscsi_sna_lt(ooo_tail->cmdsn, ooo_cmdsn->cmdsn))
list_add_tail(&ooo_cmdsn->ooo_list,
&sess->sess_ooo_cmdsn_list);
else {
@@ -834,11 +834,12 @@ static int iscsit_attach_ooo_cmdsn(
*/
list_for_each_entry(ooo_tmp, &sess->sess_ooo_cmdsn_list,
ooo_list) {
- if (ooo_tmp->cmdsn < ooo_cmdsn->cmdsn)
+ if (iscsi_sna_lt(ooo_tmp->cmdsn, ooo_cmdsn->cmdsn))
continue;
+ /* Insert before this entry */
list_add(&ooo_cmdsn->ooo_list,
- &ooo_tmp->ooo_list);
+ ooo_tmp->ooo_list.prev);
break;
}
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Francois Romieu <[email protected]>
commit ce11ff5e5963e441feb591e76278528f876c332d upstream.
Control of receive descriptor must not be returned to ethernet chipset
before vlan tag processing is done.
VLAN tag receive word is now reset both in normal and error path.
Signed-off-by: Francois Romieu <[email protected]>
Spotted-by: Timo Teras <[email protected]>
Cc: Hayes Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/realtek/r8169.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -1690,8 +1690,6 @@ static void rtl8169_rx_vlan_tag(struct R
if (opts2 & RxVlanTag)
__vlan_hwaccel_put_tag(skb, swab16(opts2 & 0xffff));
-
- desc->opts2 = 0;
}
static int rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd)
@@ -5434,8 +5432,6 @@ static int rtl_rx(struct net_device *dev
!(status & (RxRWT | RxFOVF)) &&
(dev->features & NETIF_F_RXALL))
goto process_pkt;
-
- rtl8169_mark_to_asic(desc, rx_buf_sz);
} else {
struct sk_buff *skb;
dma_addr_t addr;
@@ -5456,16 +5452,14 @@ process_pkt:
if (unlikely(rtl8169_fragmented_frame(status))) {
dev->stats.rx_dropped++;
dev->stats.rx_length_errors++;
- rtl8169_mark_to_asic(desc, rx_buf_sz);
- continue;
+ goto release_descriptor;
}
skb = rtl8169_try_rx_copy(tp->Rx_databuff[entry],
tp, pkt_size, addr);
- rtl8169_mark_to_asic(desc, rx_buf_sz);
if (!skb) {
dev->stats.rx_dropped++;
- continue;
+ goto release_descriptor;
}
rtl8169_rx_csum(skb, status);
@@ -5481,6 +5475,10 @@ process_pkt:
tp->rx_stats.bytes += pkt_size;
u64_stats_update_end(&tp->rx_stats.syncp);
}
+release_descriptor:
+ desc->opts2 = 0;
+ wmb();
+ rtl8169_mark_to_asic(desc, rx_buf_sz);
}
count = cur_rx - tp->cur_rx;
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <[email protected]>
commit 264b83c07a84223f0efd0d1db9ccc66d6f88288f upstream.
argv_split(empty_or_all_spaces) happily succeeds, it simply returns
argc == 0 and argv[0] == NULL. Change call_usermodehelper_exec() to
check sub_info->path != NULL to avoid the crash.
This is the minimal fix, todo:
- perhaps we should change argv_split() to return NULL or change the
callers.
- kill or justify ->path[0] check
- narrow the scope of helper_lock()
Signed-off-by: Oleg Nesterov <[email protected]>
Acked-By: Lucas De Marchi <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/kmod.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -541,6 +541,11 @@ int call_usermodehelper_exec(struct subp
int retval = 0;
helper_lock();
+ if (!sub_info->path) {
+ retval = -EINVAL;
+ goto out;
+ }
+
if (sub_info->path[0] == '\0')
goto out;
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
commit fefaedcfb82d2e57c2320acf60604ab03b750cc0 upstream.
The "boxes" parameter points into userspace memory. It should be verified
like any other operation against user memory.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/r300_cmdbuf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/radeon/r300_cmdbuf.c
+++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c
@@ -74,7 +74,7 @@ static int r300_emit_cliprects(drm_radeo
OUT_RING(CP_PACKET0(R300_RE_CLIPRECT_TL_0, nr * 2 - 1));
for (i = 0; i < nr; ++i) {
- if (DRM_COPY_FROM_USER_UNCHECKED
+ if (DRM_COPY_FROM_USER
(&box, &cmdbuf->boxes[n + i], sizeof(box))) {
DRM_ERROR("copy cliprect faulted\n");
return -EFAULT;
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin LaHaise <[email protected]>
commit 6368087e851e697679af059b4247aca33a69cef3 upstream.
When a 32 bit version of ipmitool is used on a 64 bit kernel, the
ipmi_devintf code fails to correctly acquire ipmi_mutex. This results in
incomplete data being retrieved in some cases, or other possible failures.
Add a wrapper around compat_ipmi_ioctl() to take ipmi_mutex to fix this.
Signed-off-by: Benjamin LaHaise <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/char/ipmi/ipmi_devintf.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/drivers/char/ipmi/ipmi_devintf.c
+++ b/drivers/char/ipmi/ipmi_devintf.c
@@ -837,13 +837,25 @@ static long compat_ipmi_ioctl(struct fil
return ipmi_ioctl(filep, cmd, arg);
}
}
+
+static long unlocked_compat_ipmi_ioctl(struct file *filep, unsigned int cmd,
+ unsigned long arg)
+{
+ int ret;
+
+ mutex_lock(&ipmi_mutex);
+ ret = compat_ipmi_ioctl(filep, cmd, arg);
+ mutex_unlock(&ipmi_mutex);
+
+ return ret;
+}
#endif
static const struct file_operations ipmi_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = ipmi_unlocked_ioctl,
#ifdef CONFIG_COMPAT
- .compat_ioctl = compat_ipmi_ioctl,
+ .compat_ioctl = unlocked_compat_ipmi_ioctl,
#endif
.open = ipmi_open,
.release = ipmi_release,
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Boyer <[email protected]>
[ Upstream commit 4f924b2aa4d3cb30f07e57d6b608838edcbc0d88 ]
Protect the SIOCGCM* ioctl macros with parenthesis.
Reported-by: Paul Wouters <[email protected]>
Signed-off-by: Josh Boyer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/if_cablemodem.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/include/linux/if_cablemodem.h
+++ b/include/linux/if_cablemodem.h
@@ -12,11 +12,11 @@
*/
/* some useful defines for sb1000.c e cmconfig.c - fv */
-#define SIOCGCMSTATS SIOCDEVPRIVATE+0 /* get cable modem stats */
-#define SIOCGCMFIRMWARE SIOCDEVPRIVATE+1 /* get cm firmware version */
-#define SIOCGCMFREQUENCY SIOCDEVPRIVATE+2 /* get cable modem frequency */
-#define SIOCSCMFREQUENCY SIOCDEVPRIVATE+3 /* set cable modem frequency */
-#define SIOCGCMPIDS SIOCDEVPRIVATE+4 /* get cable modem PIDs */
-#define SIOCSCMPIDS SIOCDEVPRIVATE+5 /* set cable modem PIDs */
+#define SIOCGCMSTATS (SIOCDEVPRIVATE+0) /* get cable modem stats */
+#define SIOCGCMFIRMWARE (SIOCDEVPRIVATE+1) /* get cm firmware version */
+#define SIOCGCMFREQUENCY (SIOCDEVPRIVATE+2) /* get cable modem frequency */
+#define SIOCSCMFREQUENCY (SIOCDEVPRIVATE+3) /* set cable modem frequency */
+#define SIOCGCMPIDS (SIOCDEVPRIVATE+4) /* get cable modem PIDs */
+#define SIOCSCMPIDS (SIOCDEVPRIVATE+5) /* set cable modem PIDs */
#endif
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Philipp Reisner <[email protected]>
commit 7c689e63a847316c1b2500f86891b0a574ce7e69 upstream.
With an automatic after split-brain recovery policy of
"after-sb-1pri call-pri-lost-after-sb",
when trying to drbd_set_role() to R_SECONDARY,
we run into a deadlock.
This was first recognized and supposedly fixed by
2009-06-10 "Fixed a deadlock when using automatic split brain recovery when both nodes are"
replacing drbd_set_role() with drbd_change_state() in that code-path,
but the first hunk of that patch forgets to remove the drbd_set_role().
We apparently only ever tested the "two primaries" case.
Signed-off-by: Philipp Reisner <[email protected]>
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Jonghwan Choi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/block/drbd/drbd_receiver.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -2225,7 +2225,6 @@ static int drbd_asb_recover_1p(struct dr
if (hg == -1 && mdev->state.role == R_PRIMARY) {
enum drbd_state_rv rv2;
- drbd_set_role(mdev, R_SECONDARY, 0);
/* drbd_change_state() does not sleep while in SS_IN_TRANSIENT_STATE,
* we might be here in C_WF_REPORT_PARAMS which is transient.
* we do not need to wait for the after state change work either. */
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Yongjun <[email protected]>
commit 35623715818dfa720cccf99cd280dcbb4b78da23 upstream.
Fix to return -ENODEV in the chip not found error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <[email protected]>
Cc: Jingoo Han <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Jonghwan Choi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-pcf2123.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -264,6 +264,7 @@ static int __devinit pcf2123_probe(struc
if (!(rxbuf[0] & 0x20)) {
dev_err(&spi->dev, "chip not found\n");
+ ret = -ENODEV;
goto kfree_exit;
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <[email protected]>
[ Upstream commit 8da3056c04bfc5f69f840ab038a38389e2de8189 ]
Jakub reported that it is fairly easy to trigger the BUG() macro
from user space with TPACKET_V3's RX_RING by just giving a wrong
header status flag. We already had a similar situation in commit
7f5c3e3a80e6654 (``af_packet: remove BUG statement in
tpacket_destruct_skb'') where this was the case in the TX_RING
side that could be triggered from user space. So really, don't use
BUG() or BUG_ON() unless there's really no way out, and i.e.
don't use it for consistency checking when there's user space
involved, no excuses, especially not if you're slapping the user
with WARN + dump_stack + BUG all at once. The two functions are
of concern:
prb_retire_current_block() [when block status != TP_STATUS_KERNEL]
prb_open_block() [when block_status != TP_STATUS_KERNEL]
Calls to prb_open_block() are guarded by ealier checks if block_status
is really TP_STATUS_KERNEL (racy!), but the first one BUG() is easily
triggable from user space. System behaves still stable after they are
removed. Also remove that yoda condition entirely, since it's already
guarded.
Reported-by: Jakub Zawadzki <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/packet/af_packet.c | 54 ++++++++++++++++++-------------------------------
1 file changed, 20 insertions(+), 34 deletions(-)
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -812,37 +812,27 @@ static void prb_open_block(struct tpacke
smp_rmb();
- if (likely(TP_STATUS_KERNEL == BLOCK_STATUS(pbd1))) {
-
- /* We could have just memset this but we will lose the
- * flexibility of making the priv area sticky
- */
- BLOCK_SNUM(pbd1) = pkc1->knxt_seq_num++;
- BLOCK_NUM_PKTS(pbd1) = 0;
- BLOCK_LEN(pbd1) = BLK_PLUS_PRIV(pkc1->blk_sizeof_priv);
- getnstimeofday(&ts);
- h1->ts_first_pkt.ts_sec = ts.tv_sec;
- h1->ts_first_pkt.ts_nsec = ts.tv_nsec;
- pkc1->pkblk_start = (char *)pbd1;
- pkc1->nxt_offset = (char *)(pkc1->pkblk_start +
- BLK_PLUS_PRIV(pkc1->blk_sizeof_priv));
- BLOCK_O2FP(pbd1) = (__u32)BLK_PLUS_PRIV(pkc1->blk_sizeof_priv);
- BLOCK_O2PRIV(pbd1) = BLK_HDR_LEN;
- pbd1->version = pkc1->version;
- pkc1->prev = pkc1->nxt_offset;
- pkc1->pkblk_end = pkc1->pkblk_start + pkc1->kblk_size;
- prb_thaw_queue(pkc1);
- _prb_refresh_rx_retire_blk_timer(pkc1);
-
- smp_wmb();
-
- return;
- }
+ /* We could have just memset this but we will lose the
+ * flexibility of making the priv area sticky
+ */
+ BLOCK_SNUM(pbd1) = pkc1->knxt_seq_num++;
+ BLOCK_NUM_PKTS(pbd1) = 0;
+ BLOCK_LEN(pbd1) = BLK_PLUS_PRIV(pkc1->blk_sizeof_priv);
+ getnstimeofday(&ts);
+ h1->ts_first_pkt.ts_sec = ts.tv_sec;
+ h1->ts_first_pkt.ts_nsec = ts.tv_nsec;
+ pkc1->pkblk_start = (char *)pbd1;
+ pkc1->nxt_offset = (char *)(pkc1->pkblk_start +
+ BLK_PLUS_PRIV(pkc1->blk_sizeof_priv));
+ BLOCK_O2FP(pbd1) = (__u32)BLK_PLUS_PRIV(pkc1->blk_sizeof_priv);
+ BLOCK_O2PRIV(pbd1) = BLK_HDR_LEN;
+ pbd1->version = pkc1->version;
+ pkc1->prev = pkc1->nxt_offset;
+ pkc1->pkblk_end = pkc1->pkblk_start + pkc1->kblk_size;
+ prb_thaw_queue(pkc1);
+ _prb_refresh_rx_retire_blk_timer(pkc1);
- WARN(1, "ERROR block:%p is NOT FREE status:%d kactive_blk_num:%d\n",
- pbd1, BLOCK_STATUS(pbd1), pkc1->kactive_blk_num);
- dump_stack();
- BUG();
+ smp_wmb();
}
/*
@@ -933,10 +923,6 @@ static void prb_retire_current_block(str
prb_close_block(pkc, pbd, po, status);
return;
}
-
- WARN(1, "ERROR-pbd[%d]:%p\n", pkc->kactive_blk_num, pbd);
- dump_stack();
- BUG();
}
static int prb_curr_blk_in_use(struct tpacket_kbdq_core *pkc,
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Patrick McHardy <[email protected]>
[ Upstream commit 6708c9e5cc9bfc7c9a00ce9c0fdd0b1d4952b3d1 ]
Signed-off-by: Patrick McHardy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2170,7 +2170,7 @@ EXPORT_SYMBOL(netif_skb_features);
* support DMA from it.
*/
static inline int skb_needs_linearize(struct sk_buff *skb,
- int features)
+ netdev_features_t features)
{
return skb_is_nonlinear(skb) &&
((skb_has_frag_list(skb) &&
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tomoya MORINAGA <[email protected]>
commit 5c1ef59168c485318e40ba485c1eba57d81d0faa upstream.
pdc_desc_get() is called from pd_prep_slave_sg, and the function is
called from interrupt context(e.g. Uart driver "pch_uart.c").
In fact, I saw kernel error message.
So, GFP_ATOMIC must be used not GFP_NOIO.
Signed-off-by: Tomoya MORINAGA <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/pch_dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -476,7 +476,7 @@ static struct pch_dma_desc *pdc_desc_get
dev_dbg(chan2dev(&pd_chan->chan), "scanned %d descriptors\n", i);
if (!ret) {
- ret = pdc_alloc_desc(&pd_chan->chan, GFP_NOIO);
+ ret = pdc_alloc_desc(&pd_chan->chan, GFP_ATOMIC);
if (ret) {
spin_lock(&pd_chan->lock);
pd_chan->descs_allocated++;
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Naoya Horiguchi <[email protected]>
commit af73e4d9506d3b797509f3c030e7dcd554f7d9c4 upstream.
The current kernel returns -EINVAL unless a given mmap length is
"almost" hugepage aligned. This is because in sys_mmap_pgoff() the
given length is passed to vm_mmap_pgoff() as it is without being aligned
with hugepage boundary.
This is a regression introduced in commit 40716e29243d ("hugetlbfs: fix
alignment of huge page requests"), where alignment code is pushed into
hugetlb_file_setup() and the variable len in caller side is not changed.
To fix this, this patch partially reverts that commit, and adds
alignment code in caller side. And it also introduces hstate_sizelog()
in order to get proper hstate to specified hugepage size.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=56881
[[email protected]: fix warning when CONFIG_HUGETLB_PAGE=n]
Signed-off-by: Naoya Horiguchi <[email protected]>
Signed-off-by: Johannes Weiner <[email protected]>
Reported-by: <[email protected]>
Cc: Steven Truelove <[email protected]>
Cc: Jianguo Wu <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Jianguo Wu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/hugetlbfs/inode.c | 20 ++++++++++----------
include/linux/hugetlb.h | 9 ++++-----
ipc/shm.c | 4 +++-
mm/mmap.c | 6 +++++-
4 files changed, 22 insertions(+), 17 deletions(-)
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -927,9 +927,13 @@ static int can_do_hugetlb_shm(void)
return capable(CAP_IPC_LOCK) || in_group_p(sysctl_hugetlb_shm_group);
}
-struct file *hugetlb_file_setup(const char *name, unsigned long addr,
- size_t size, vm_flags_t acctflag,
- struct user_struct **user, int creat_flags)
+/*
+ * Note that size should be aligned to proper hugepage size in caller side,
+ * otherwise hugetlb_reserve_pages reserves one less hugepages than intended.
+ */
+struct file *hugetlb_file_setup(const char *name, size_t size,
+ vm_flags_t acctflag, struct user_struct **user,
+ int creat_flags)
{
int error = -ENOMEM;
struct file *file;
@@ -937,8 +941,6 @@ struct file *hugetlb_file_setup(const ch
struct path path;
struct dentry *root;
struct qstr quick_string;
- struct hstate *hstate;
- unsigned long num_pages;
*user = NULL;
if (!hugetlbfs_vfsmount)
@@ -972,12 +974,10 @@ struct file *hugetlb_file_setup(const ch
if (!inode)
goto out_dentry;
- hstate = hstate_inode(inode);
- size += addr & ~huge_page_mask(hstate);
- num_pages = ALIGN(size, huge_page_size(hstate)) >>
- huge_page_shift(hstate);
error = -ENOMEM;
- if (hugetlb_reserve_pages(inode, 0, num_pages, NULL, acctflag))
+ if (hugetlb_reserve_pages(inode, 0,
+ size >> huge_page_shift(hstate_inode(inode)), NULL,
+ acctflag))
goto out_inode;
d_instantiate(path.dentry, inode);
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -152,8 +152,7 @@ static inline struct hugetlbfs_sb_info *
extern const struct file_operations hugetlbfs_file_operations;
extern const struct vm_operations_struct hugetlb_vm_ops;
-struct file *hugetlb_file_setup(const char *name, unsigned long addr,
- size_t size, vm_flags_t acct,
+struct file *hugetlb_file_setup(const char *name, size_t size, vm_flags_t acct,
struct user_struct **user, int creat_flags);
static inline int is_file_hugepages(struct file *file)
@@ -170,8 +169,8 @@ static inline int is_file_hugepages(stru
#define is_file_hugepages(file) 0
static inline struct file *
-hugetlb_file_setup(const char *name, unsigned long addr, size_t size,
- vm_flags_t acctflag, struct user_struct **user, int creat_flags)
+hugetlb_file_setup(const char *name, size_t size, vm_flags_t acctflag,
+ struct user_struct **user, int creat_flags)
{
return ERR_PTR(-ENOSYS);
}
@@ -294,7 +293,7 @@ static inline unsigned hstate_index_to_s
return hstates[index].order + PAGE_SHIFT;
}
-#else
+#else /* CONFIG_HUGETLB_PAGE */
struct hstate {};
#define alloc_huge_page_node(h, nid) NULL
#define alloc_bootmem_huge_page(h) NULL
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -479,10 +479,12 @@ static int newseg(struct ipc_namespace *
sprintf (name, "SYSV%08x", key);
if (shmflg & SHM_HUGETLB) {
+ size_t hugesize = ALIGN(size, huge_page_size(&default_hstate));
+
/* hugetlb_file_setup applies strict accounting */
if (shmflg & SHM_NORESERVE)
acctflag = VM_NORESERVE;
- file = hugetlb_file_setup(name, 0, size, acctflag,
+ file = hugetlb_file_setup(name, hugesize, acctflag,
&shp->mlock_user, HUGETLB_SHMFS_INODE);
} else {
/*
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1130,15 +1130,19 @@ SYSCALL_DEFINE6(mmap_pgoff, unsigned lon
file = fget(fd);
if (!file)
goto out;
+ if (is_file_hugepages(file))
+ len = ALIGN(len, huge_page_size(hstate_file(file)));
} else if (flags & MAP_HUGETLB) {
struct user_struct *user = NULL;
+
+ len = ALIGN(len, huge_page_size(&default_hstate));
/*
* VM_NORESERVE is used because the reservations will be
* taken when vm_ops->mmap() is called
* A dummy user value is used because we are not locking
* memory so no accounting is necessary
*/
- file = hugetlb_file_setup(HUGETLB_ANON_FILE, addr, len,
+ file = hugetlb_file_setup(HUGETLB_ANON_FILE, len,
VM_NORESERVE, &user,
HUGETLB_ANONHUGE_INODE);
if (IS_ERR(file))
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Snitzer <[email protected]>
commit 307615a26e95406c42c95916a66ba50434567e0f upstream.
The dm thin pool target claims to support the zeroing of discarded
data areas. This turns out to be incorrect when processing discards
that do not exactly cover a complete number of blocks, so the target
must always set discard_zeroes_data_unsupported.
The thin pool target will zero blocks when they are allocated if the
skip_block_zeroing feature is not specified. The block layer
may send a discard that only partly covers a block. If a thin pool
block is partially discarded then there is no guarantee that the
discarded data will get zeroed before it is accessed again.
Due to this, thin devices cannot claim discards will always zero data.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Joe Thornber <[email protected]>
Signed-off-by: Alasdair G Kergon <[email protected]>
Cc: Libo Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-thin.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -2027,6 +2027,7 @@ static int pool_ctr(struct dm_target *ti
* thin devices' discard limits consistent).
*/
ti->discards_supported = 1;
+ ti->discard_zeroes_data_unsupported = 1;
}
ti->private = pt;
@@ -2443,7 +2444,6 @@ static void set_discard_limits(struct po
* bios that overlap 2 blocks.
*/
limits->discard_granularity = pool->sectors_per_block << SECTOR_SHIFT;
- limits->discard_zeroes_data = pool->pf.zero_new_blocks;
}
static void pool_io_hints(struct dm_target *ti, struct queue_limits *limits)
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang <[email protected]>
[ Upstream commit 84c4a9dfbf430861e7588d95ae3ff61535dca351 ]
We forget to call dev_put() on error path in xfrm6_fill_dst(),
its caller doesn't handle this.
Signed-off-by: Cong Wang <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: Steffen Klassert <[email protected]>
Cc: David S. Miller <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/xfrm6_policy.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -96,8 +96,10 @@ static int xfrm6_fill_dst(struct xfrm_ds
dev_hold(dev);
xdst->u.rt6.rt6i_idev = in6_dev_get(dev);
- if (!xdst->u.rt6.rt6i_idev)
+ if (!xdst->u.rt6.rt6i_idev) {
+ dev_put(dev);
return -ENODEV;
+ }
xdst->u.rt6.rt6i_peer = rt->rt6i_peer;
if (rt->rt6i_peer)
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Pirko <[email protected]>
[ Upstream commit 233c7df0821c4190e2d3f4be0f2ca0ab40a5ed8c, note
that I had to add list_first_or_null_rcu to rculist.h in order
to accomodate this fix. ]
Currently, if macvlan in passthru mode is created and data are rxed and
you remove this device, following panic happens:
NULL pointer dereference at 0000000000000198
IP: [<ffffffffa0196058>] macvlan_handle_frame+0x153/0x1f7 [macvlan]
I'm using following script to trigger this:
<script>
while [ 1 ]
do
ip link add link e1 name macvtap0 type macvtap mode passthru
ip link set e1 up
ip link set macvtap0 up
IFINDEX=`ip link |grep macvtap0 | cut -f 1 -d ':'`
cat /dev/tap$IFINDEX >/dev/null &
ip link del dev macvtap0
done
</script>
I run this script while "ping -f" is running on another machine to send
packets to e1 rx.
Reason of the panic is that list_first_entry() is blindly called in
macvlan_handle_frame() even if the list was empty. vlan is set to
incorrect pointer which leads to the crash.
I'm fixing this by protecting port->vlans list by rcu and by preventing
from getting incorrect pointer in case the list is empty.
Introduced by: commit eb06acdc85585f2 "macvlan: Introduce 'passthru' mode to takeover the underlying device"
Signed-off-by: Jiri Pirko <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/macvlan.c | 7 ++++---
include/linux/rculist.h | 17 +++++++++++++++++
2 files changed, 21 insertions(+), 3 deletions(-)
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -205,7 +205,8 @@ static rx_handler_result_t macvlan_handl
}
if (port->passthru)
- vlan = list_first_entry(&port->vlans, struct macvlan_dev, list);
+ vlan = list_first_or_null_rcu(&port->vlans,
+ struct macvlan_dev, list);
else
vlan = macvlan_hash_lookup(port, eth->h_dest);
if (vlan == NULL)
@@ -724,7 +725,7 @@ int macvlan_common_newlink(struct net *s
if (err < 0)
goto destroy_port;
- list_add_tail(&vlan->list, &port->vlans);
+ list_add_tail_rcu(&vlan->list, &port->vlans);
netif_stacked_transfer_operstate(lowerdev, dev);
return 0;
@@ -750,7 +751,7 @@ void macvlan_dellink(struct net_device *
{
struct macvlan_dev *vlan = netdev_priv(dev);
- list_del(&vlan->list);
+ list_del_rcu(&vlan->list);
unregister_netdevice_queue(dev, head);
}
EXPORT_SYMBOL_GPL(macvlan_dellink);
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -242,6 +242,23 @@ static inline void list_splice_init_rcu(
list_entry_rcu((ptr)->next, type, member)
/**
+ * list_first_or_null_rcu - get the first element from a list
+ * @ptr: the list head to take the element from.
+ * @type: the type of the struct this is embedded in.
+ * @member: the name of the list_struct within the struct.
+ *
+ * Note that if the list is empty, it returns NULL.
+ *
+ * This primitive may safely run concurrently with the _rcu list-mutation
+ * primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
+ */
+#define list_first_or_null_rcu(ptr, type, member) \
+ ({struct list_head *__ptr = (ptr); \
+ struct list_head __rcu *__next = list_next_rcu(__ptr); \
+ likely(__ptr != __next) ? container_of(__next, type, member) : NULL; \
+ })
+
+/**
* list_for_each_entry_rcu - iterate over rcu list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit f77d602124d865c38705df7fa25c03de9c284ad2 ]
We have seen multiple NULL dereferences in __inet6_lookup_established()
After analysis, I found that inet6_sk() could be NULL while the
check for sk_family == AF_INET6 was true.
Bug was added in linux-2.6.29 when RCU lookups were introduced in UDP
and TCP stacks.
Once an IPv6 socket, using SLAB_DESTROY_BY_RCU is inserted in a hash
table, we no longer can clear pinet6 field.
This patch extends logic used in commit fcbdf09d9652c891
("net: fix nulls list corruptions in sk_prot_alloc")
TCP/UDP/UDPLite IPv6 protocols provide their own .clear_sk() method
to make sure we do not clear pinet6 field.
At socket clone phase, we do not really care, as cloning the parent (non
NULL) pinet6 is not adding a fatal race.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/sock.h | 12 ++++++++++++
net/core/sock.c | 12 ------------
net/ipv6/tcp_ipv6.c | 12 ++++++++++++
net/ipv6/udp.c | 13 ++++++++++++-
net/ipv6/udp_impl.h | 2 ++
net/ipv6/udplite.c | 2 +-
6 files changed, 39 insertions(+), 14 deletions(-)
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -793,6 +793,18 @@ struct inet_hashinfo;
struct raw_hashinfo;
struct module;
+/*
+ * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes
+ * un-modified. Special care is taken when initializing object to zero.
+ */
+static inline void sk_prot_clear_nulls(struct sock *sk, int size)
+{
+ if (offsetof(struct sock, sk_node.next) != 0)
+ memset(sk, 0, offsetof(struct sock, sk_node.next));
+ memset(&sk->sk_node.pprev, 0,
+ size - offsetof(struct sock, sk_node.pprev));
+}
+
/* Networking protocol blocks we attach to sockets.
* socket layer -> transport layer interface
* transport -> network interface is defined by struct inet_proto
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1093,18 +1093,6 @@ static void sock_copy(struct sock *nsk,
#endif
}
-/*
- * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes
- * un-modified. Special care is taken when initializing object to zero.
- */
-static inline void sk_prot_clear_nulls(struct sock *sk, int size)
-{
- if (offsetof(struct sock, sk_node.next) != 0)
- memset(sk, 0, offsetof(struct sock, sk_node.next));
- memset(&sk->sk_node.pprev, 0,
- size - offsetof(struct sock, sk_node.pprev));
-}
-
void sk_prot_clear_portaddr_nulls(struct sock *sk, int size)
{
unsigned long nulls1, nulls2;
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -2079,6 +2079,17 @@ void tcp6_proc_exit(struct net *net)
}
#endif
+static void tcp_v6_clear_sk(struct sock *sk, int size)
+{
+ struct inet_sock *inet = inet_sk(sk);
+
+ /* we do not want to clear pinet6 field, because of RCU lookups */
+ sk_prot_clear_nulls(sk, offsetof(struct inet_sock, pinet6));
+
+ size -= offsetof(struct inet_sock, pinet6) + sizeof(inet->pinet6);
+ memset(&inet->pinet6 + 1, 0, size);
+}
+
struct proto tcpv6_prot = {
.name = "TCPv6",
.owner = THIS_MODULE,
@@ -2120,6 +2131,7 @@ struct proto tcpv6_prot = {
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_KMEM
.proto_cgroup = tcp_proto_cgroup,
#endif
+ .clear_sk = tcp_v6_clear_sk,
};
static const struct inet6_protocol tcpv6_protocol = {
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1457,6 +1457,17 @@ void udp6_proc_exit(struct net *net) {
}
#endif /* CONFIG_PROC_FS */
+void udp_v6_clear_sk(struct sock *sk, int size)
+{
+ struct inet_sock *inet = inet_sk(sk);
+
+ /* we do not want to clear pinet6 field, because of RCU lookups */
+ sk_prot_clear_portaddr_nulls(sk, offsetof(struct inet_sock, pinet6));
+
+ size -= offsetof(struct inet_sock, pinet6) + sizeof(inet->pinet6);
+ memset(&inet->pinet6 + 1, 0, size);
+}
+
/* ------------------------------------------------------------------------ */
struct proto udpv6_prot = {
@@ -1487,7 +1498,7 @@ struct proto udpv6_prot = {
.compat_setsockopt = compat_udpv6_setsockopt,
.compat_getsockopt = compat_udpv6_getsockopt,
#endif
- .clear_sk = sk_prot_clear_portaddr_nulls,
+ .clear_sk = udp_v6_clear_sk,
};
static struct inet_protosw udpv6_protosw = {
--- a/net/ipv6/udp_impl.h
+++ b/net/ipv6/udp_impl.h
@@ -31,6 +31,8 @@ extern int udpv6_recvmsg(struct kiocb *i
extern int udpv6_queue_rcv_skb(struct sock * sk, struct sk_buff *skb);
extern void udpv6_destroy_sock(struct sock *sk);
+extern void udp_v6_clear_sk(struct sock *sk, int size);
+
#ifdef CONFIG_PROC_FS
extern int udp6_seq_show(struct seq_file *seq, void *v);
#endif
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -56,7 +56,7 @@ struct proto udplitev6_prot = {
.compat_setsockopt = compat_udpv6_setsockopt,
.compat_getsockopt = compat_udpv6_getsockopt,
#endif
- .clear_sk = sk_prot_clear_portaddr_nulls,
+ .clear_sk = udp_v6_clear_sk,
};
static struct inet_protosw udplite6_protosw = {
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergei Shtylyov <[email protected]>
[ Upstream commit 4b264a1676e70dc656ba53a8cac690f2d4b65f4e ]
The driver wrongly claimed I/O ports at an address returned by pci_iomap() --
even if it was passed an MMIO address. Fix this by claiming/releasing all PCI
resources in the PCI driver's probe()/remove() methods instead and get rid of
'must_free_region' flag weirdness (why would Cardbus claim anything for us?).
Signed-off-by: Sergei Shtylyov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/3com/3c59x.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -632,7 +632,6 @@ struct vortex_private {
pm_state_valid:1, /* pci_dev->saved_config_space has sane contents */
open:1,
medialock:1,
- must_free_region:1, /* Flag: if zero, Cardbus owns the I/O region */
large_frames:1, /* accept large frames */
handling_irq:1; /* private in_irq indicator */
/* {get|set}_wol operations are already serialized by rtnl.
@@ -1012,6 +1011,12 @@ static int __devinit vortex_init_one(str
if (rc < 0)
goto out;
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc < 0) {
+ pci_disable_device(pdev);
+ goto out;
+ }
+
unit = vortex_cards_found;
if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) {
@@ -1027,6 +1032,7 @@ static int __devinit vortex_init_one(str
if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */
ioaddr = pci_iomap(pdev, 0, 0);
if (!ioaddr) {
+ pci_release_regions(pdev);
pci_disable_device(pdev);
rc = -ENOMEM;
goto out;
@@ -1036,6 +1042,7 @@ static int __devinit vortex_init_one(str
ent->driver_data, unit);
if (rc < 0) {
pci_iounmap(pdev, ioaddr);
+ pci_release_regions(pdev);
pci_disable_device(pdev);
goto out;
}
@@ -1179,11 +1186,6 @@ static int __devinit vortex_probe1(struc
/* PCI-only startup logic */
if (pdev) {
- /* EISA resources already marked, so only PCI needs to do this here */
- /* Ignore return value, because Cardbus drivers already allocate for us */
- if (request_region(dev->base_addr, vci->io_size, print_name) != NULL)
- vp->must_free_region = 1;
-
/* enable bus-mastering if necessary */
if (vci->flags & PCI_USES_MASTER)
pci_set_master(pdev);
@@ -1221,7 +1223,7 @@ static int __devinit vortex_probe1(struc
&vp->rx_ring_dma);
retval = -ENOMEM;
if (!vp->rx_ring)
- goto free_region;
+ goto free_device;
vp->tx_ring = (struct boom_tx_desc *)(vp->rx_ring + RX_RING_SIZE);
vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE;
@@ -1486,9 +1488,7 @@ free_ring:
+ sizeof(struct boom_tx_desc) * TX_RING_SIZE,
vp->rx_ring,
vp->rx_ring_dma);
-free_region:
- if (vp->must_free_region)
- release_region(dev->base_addr, vci->io_size);
+free_device:
free_netdev(dev);
pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval);
out:
@@ -3256,8 +3256,9 @@ static void __devexit vortex_remove_one(
+ sizeof(struct boom_tx_desc) * TX_RING_SIZE,
vp->rx_ring,
vp->rx_ring_dma);
- if (vp->must_free_region)
- release_region(dev->base_addr, vp->io_size);
+
+ pci_release_regions(pdev);
+
free_netdev(dev);
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergei Shtylyov <[email protected]>
[ Upstream commit c81400be716aa4c76f6ebf339ba94358dbbf6da6 ]
When unloading the driver that drives an EISA board, a message similar to the
following one is displayed:
Trying to free nonexistent resource <0000000000013000-000000000001301f>
Then an user is unable to reload the driver because the resource it requested in
the previous load hasn't been freed. This happens most probably due to a typo in
vortex_eisa_remove() which calls release_region() with 'dev->base_addr' instead
of 'edev->base_addr'...
Reported-by: Matthew Whitehead <[email protected]>
Tested-by: Matthew Whitehead <[email protected]>
Signed-off-by: Sergei Shtylyov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/3com/3c59x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -951,7 +951,7 @@ static int __devexit vortex_eisa_remove(
unregister_netdev(dev);
iowrite16(TotalReset|0x14, ioaddr + EL3_CMD);
- release_region(dev->base_addr, VORTEX_TOTAL_SIZE);
+ release_region(edev->base_addr, VORTEX_TOTAL_SIZE);
free_netdev(dev);
return 0;
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Gleixner <[email protected]>
commit 4b0c0f294f60abcdd20994a8341a95c8ac5eeb96 upstream.
Prarit reported a crash on CPU offline/online. The reason is that on
CPU down the NOHZ related per cpu data of the dead cpu is not cleaned
up. If at cpu online an interrupt happens before the per cpu tick
device is registered the irq_enter() check potentially sees stale data
and dereferences a NULL pointer.
Cleanup the data after the cpu is dead.
Reported-by: Prarit Bhargava <[email protected]>
Cc: Mike Galbraith <[email protected]>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305031451561.2886@ionos
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/time/tick-sched.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -866,7 +866,7 @@ void tick_cancel_sched_timer(int cpu)
hrtimer_cancel(&ts->sched_timer);
# endif
- ts->nohz_mode = NOHZ_MODE_INACTIVE;
+ memset(ts, 0, sizeof(*ts));
}
#endif
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjørn Mork <[email protected]>
[ Upstream commit 6ff509af3869ccac69dcf8905fc75b9a76951594 ]
A number of LTE devices from different vendors all suffer from the
same firmware bug: Most of the packets received from the device while
it is attached to a LTE network will not have an ethernet header. The
devices work as expected when attached to 2G or 3G networks, sending
an ethernet header with all packets.
This driver is not aware of which network the modem attached to, and
even if it were there are still some packet types which are always
received with the header intact.
All devices supported by this driver have severely limited
networking capabilities:
- can only transmit IPv4, IPv6 and possibly ARP
- can only support a single host hardware address at any time
- will only do point-to-point communcation with the host
Because of this, we are able to reliably identify any bogus raw IP
packets by simply looking at the 4 IP version bits. All we need to
do is to avoid 4 or 6 in the first digit of the mac address. This
workaround ensures this, and fix up the received packets as necessary.
Given the distribution of the bug, it is believed that the source is
the chipset vendor. The devices which are verified to be affected are:
Huawei E392u-12 (Qualcomm MDM9200)
Pantech UML290 (Qualcomm MDM9600)
Novatel USB551L (Qualcomm MDM9600)
Novatel E362 (Qualcomm MDM9600)
It is believed that the bug depend on firmware revision, which means
that possibly all devices based on the above mentioned chipset may be
affected if we consider all available firmware revisions.
The information about affected devices and versions is likely
incomplete. As the additional overhead for packets not needing this
fixup is very small, it is considered acceptable to apply the
workaround to all devices handled by this driver.
Reported-by: Dan Williams <[email protected]>
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 81 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -9,6 +9,7 @@
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
@@ -174,6 +175,79 @@ err:
return status;
}
+/* Make up an ethernet header if the packet doesn't have one.
+ *
+ * A firmware bug common among several devices cause them to send raw
+ * IP packets under some circumstances. There is no way for the
+ * driver/host to know when this will happen. And even when the bug
+ * hits, some packets will still arrive with an intact header.
+ *
+ * The supported devices are only capably of sending IPv4, IPv6 and
+ * ARP packets on a point-to-point link. Any packet with an ethernet
+ * header will have either our address or a broadcast/multicast
+ * address as destination. ARP packets will always have a header.
+ *
+ * This means that this function will reliably add the appropriate
+ * header iff necessary, provided our hardware address does not start
+ * with 4 or 6.
+ */
+static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ __be16 proto;
+
+ /* usbnet rx_complete guarantees that skb->len is at least
+ * hard_header_len, so we can inspect the dest address without
+ * checking skb->len
+ */
+ switch (skb->data[0] & 0xf0) {
+ case 0x40:
+ proto = htons(ETH_P_IP);
+ break;
+ case 0x60:
+ proto = htons(ETH_P_IPV6);
+ break;
+ default:
+ /* pass along other packets without modifications */
+ return 1;
+ }
+ if (skb_headroom(skb) < ETH_HLEN)
+ return 0;
+ skb_push(skb, ETH_HLEN);
+ skb_reset_mac_header(skb);
+ eth_hdr(skb)->h_proto = proto;
+ memset(eth_hdr(skb)->h_source, 0, ETH_ALEN);
+ memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
+ return 1;
+}
+
+/* very simplistic detection of IPv4 or IPv6 headers */
+static bool possibly_iphdr(const char *data)
+{
+ return (data[0] & 0xd0) == 0x40;
+}
+
+/* disallow addresses which may be confused with IP headers */
+static int qmi_wwan_mac_addr(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data) ||
+ possibly_iphdr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+ memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+ return 0;
+}
+
+static const struct net_device_ops qmi_wwan_netdev_ops = {
+ .ndo_open = usbnet_open,
+ .ndo_stop = usbnet_stop,
+ .ndo_start_xmit = usbnet_start_xmit,
+ .ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_change_mtu = usbnet_change_mtu,
+ .ndo_set_mac_address = qmi_wwan_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
/* using a counter to merge subdriver requests with our own into a combined state */
static int qmi_wwan_manage_power(struct usbnet *dev, int on)
{
@@ -257,6 +331,12 @@ static int qmi_wwan_bind_shared(struct u
/* save subdriver struct for suspend/resume wrappers */
dev->data[0] = (unsigned long)subdriver;
+ /* make MAC addr easily distinguishable from an IP header */
+ if (possibly_iphdr(dev->net->dev_addr)) {
+ dev->net->dev_addr[0] |= 0x02; /* set local assignment bit */
+ dev->net->dev_addr[0] &= 0xbf; /* clear "IP" bit */
+ }
+ dev->net->netdev_ops = &qmi_wwan_netdev_ops;
err:
return rv;
}
@@ -326,6 +406,7 @@ static const struct driver_info qmi_wwan
.bind = qmi_wwan_bind_shared,
.unbind = qmi_wwan_unbind_shared,
.manage_power = qmi_wwan_manage_power,
+ .rx_fixup = qmi_wwan_rx_fixup,
};
static const struct driver_info qmi_wwan_force_int0 = {
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: stephen hemminger <[email protected]>
[ Upstream commit 83401eb4990ff6af55aeed8f49681558544192e6 ]
A bridge should only send topology change notice if it is not
the root bridge. It is possible for message age timer to elect itself
as a new root bridge, and still have a topology change timer running
but waiting for bridge lock on other CPU.
Solve the race by checking if we are root bridge before continuing.
This was the root cause of the cases where br_send_tcn_bpdu would OOPS.
Reported-by: JerryKang <[email protected]>
Signed-off-by: Stephen Hemminger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_stp_timer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/bridge/br_stp_timer.c
+++ b/net/bridge/br_stp_timer.c
@@ -107,7 +107,7 @@ static void br_tcn_timer_expired(unsigne
br_debug(br, "tcn timer expired\n");
spin_lock(&br->lock);
- if (br->dev->flags & IFF_UP) {
+ if (!br_is_root_bridge(br) && (br->dev->flags & IFF_UP)) {
br_transmit_tcn(br);
mod_timer(&br->tcn_timer,jiffies + br->bridge_hello_time);
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjørn Mork <[email protected]>
[ Upstream commit b29d3145183da4e07d4b570fa8acdd3ac4a5c572 ]
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/8021q/vlan_dev.c | 2 +-
net/core/ethtool.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -598,7 +598,7 @@ static netdev_features_t vlan_dev_fix_fe
netdev_features_t features)
{
struct net_device *real_dev = vlan_dev_priv(dev)->real_dev;
- u32 old_features = features;
+ netdev_features_t old_features = features;
features &= real_dev->vlan_features;
features |= NETIF_F_RXCSUM;
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1286,7 +1286,7 @@ int dev_ethtool(struct net *net, struct
void __user *useraddr = ifr->ifr_data;
u32 ethcmd;
int rc;
- u32 old_features;
+ netdev_features_t old_features;
if (!dev || !netif_device_present(dev))
return -ENODEV;
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjørn Mork <[email protected]>
[ Upstream commit 6483bdc9d76fb98174797516a19d289eb837909e ]
Received packets are sometimes addressed to 00:a0:c6:00:00:00
instead of the address the device firmware should have learned
from the host:
321.224126 77.16.85.204 -> 148.122.171.134 ICMP 98 Echo (ping) request id=0x4025, seq=64/16384, ttl=64
0000 82 c0 82 c9 f1 67 82 c0 82 c9 f1 67 08 00 45 00 .....g.....g..E.
0010 00 54 00 00 40 00 40 01 57 cc 4d 10 55 cc 94 7a .T..@[email protected]
0020 ab 86 08 00 62 fc 40 25 00 40 b2 bc 6e 51 00 00 ....b.@%[email protected]..
0030 00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15 ..k.............
0040 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 .......... !"#$%
0050 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 &'()*+,-./012345
0060 36 37 67
321.240607 148.122.171.134 -> 77.16.85.204 ICMP 98 Echo (ping) reply id=0x4025, seq=64/16384, ttl=55
0000 00 a0 c6 00 00 00 02 50 f3 00 00 00 08 00 45 00 .......P......E.
0010 00 54 00 56 00 00 37 01 a0 76 94 7a ab 86 4d 10 .T.V..7..v.z..M.
0020 55 cc 00 00 6a fc 40 25 00 40 b2 bc 6e 51 00 00 U...j.@%[email protected]..
0030 00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15 ..k.............
0040 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 .......... !"#$%
0050 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 &'()*+,-./012345
0060 36 37 67
The bogus address is always the same, and matches the address
suggested by many devices as a default address. It is likely a
hardcoded firmware default.
The circumstances where this bug has been observed indicates that
the trigger is related to timing or some other factor the host
cannot control. Repeating the exact same configuration sequence
that caused it to trigger once, will not necessarily cause it to
trigger the next time. Reproducing the bug is therefore difficult.
This opens up a possibility that the bug is more common than we can
confirm, because affected devices often will work properly again
after a reset. A procedure most users are likely to try out before
reporting a bug.
Unconditionally rewriting the destination address if the first digit
of the received packet is 0, is considered an acceptable compromise
since we already have to inspect this digit. The simplification will
cause unnecessary rewrites if the real address starts with 0, but this
is still better than adding additional tests for this particular case.
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -190,6 +190,10 @@ err:
* This means that this function will reliably add the appropriate
* header iff necessary, provided our hardware address does not start
* with 4 or 6.
+ *
+ * Another common firmware bug results in all packets being addressed
+ * to 00:a0:c6:00:00:00 despite the host address being different.
+ * This function will also fixup such packets.
*/
static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
@@ -206,6 +210,12 @@ static int qmi_wwan_rx_fixup(struct usbn
case 0x60:
proto = htons(ETH_P_IPV6);
break;
+ case 0x00:
+ if (is_multicast_ether_addr(skb->data))
+ return 1;
+ /* possibly bogus destination - rewrite just in case */
+ skb_reset_mac_header(skb);
+ goto fix_dest;
default:
/* pass along other packets without modifications */
return 1;
@@ -216,6 +226,7 @@ static int qmi_wwan_rx_fixup(struct usbn
skb_reset_mac_header(skb);
eth_hdr(skb)->h_proto = proto;
memset(eth_hdr(skb)->h_source, 0, ETH_ALEN);
+fix_dest:
memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
return 1;
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jamal Hadi Salim <[email protected]>
[ Upstream commit 0dcffd09641f3abb21ac5cabc61542ab289d1a3c ]
Deal with changes in newer xtables while maintaining backward
compatibility. Thanks to Jan Engelhardt for suggestions.
Signed-off-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_ipt.c | 33 ++++++++++++++++++++++++++++++---
1 file changed, 30 insertions(+), 3 deletions(-)
--- a/net/sched/act_ipt.c
+++ b/net/sched/act_ipt.c
@@ -8,7 +8,7 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * Copyright: Jamal Hadi Salim (2002-4)
+ * Copyright: Jamal Hadi Salim (2002-13)
*/
#include <linux/types.h>
@@ -299,17 +299,44 @@ static struct tc_action_ops act_ipt_ops
.walk = tcf_generic_walker
};
-MODULE_AUTHOR("Jamal Hadi Salim(2002-4)");
+static struct tc_action_ops act_xt_ops = {
+ .kind = "xt",
+ .hinfo = &ipt_hash_info,
+ .type = TCA_ACT_IPT,
+ .capab = TCA_CAP_NONE,
+ .owner = THIS_MODULE,
+ .act = tcf_ipt,
+ .dump = tcf_ipt_dump,
+ .cleanup = tcf_ipt_cleanup,
+ .lookup = tcf_hash_search,
+ .init = tcf_ipt_init,
+ .walk = tcf_generic_walker
+};
+
+MODULE_AUTHOR("Jamal Hadi Salim(2002-13)");
MODULE_DESCRIPTION("Iptables target actions");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("act_xt");
static int __init ipt_init_module(void)
{
- return tcf_register_action(&act_ipt_ops);
+ int ret1, ret2;
+ ret1 = tcf_register_action(&act_xt_ops);
+ if (ret1 < 0)
+ printk("Failed to load xt action\n");
+ ret2 = tcf_register_action(&act_ipt_ops);
+ if (ret2 < 0)
+ printk("Failed to load ipt action\n");
+
+ if (ret1 < 0 && ret2 < 0)
+ return ret1;
+ else
+ return 0;
}
static void __exit ipt_cleanup_module(void)
{
+ tcf_unregister_action(&act_xt_ops);
tcf_unregister_action(&act_ipt_ops);
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <[email protected]>
[ Upstream commit 89cc80a44b7c320e08599cb86f6aef0ead8986a1 ]
efx_mcdi_get_board_cfg() uses a buffer for the firmware response that
is only large enough to hold subtypes for the originally defined set
of NVRAM partitions. Longer responses are truncated, and we may read
off the end of the buffer when copying out subtypes for additional
partitions. In particular, this can result in the MTD partition for
an FPGA bitfile being named e.g. 'eth5 sfc_fpga:00' when it should be
'eth5 sfc_fpga:01'. This means the firmware update tool (sfupdate)
can't tell which bitfile should be written to the partition.
Correct the response buffer size.
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/sfc/mcdi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/sfc/mcdi.c
+++ b/drivers/net/ethernet/sfc/mcdi.c
@@ -640,7 +640,7 @@ fail:
int efx_mcdi_get_board_cfg(struct efx_nic *efx, u8 *mac_address,
u16 *fw_subtype_list, u32 *capabilities)
{
- uint8_t outbuf[MC_CMD_GET_BOARD_CFG_OUT_LENMIN];
+ uint8_t outbuf[MC_CMD_GET_BOARD_CFG_OUT_LENMAX];
size_t outlen, offset, i;
int port_num = efx_port_num(efx);
int rc;
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthew Whitehead <[email protected]>
[ Upstream commit 3b54912f9cd167641b91d4a697bd742f70e534fe ]
The venerable 3c509 driver only sets its device parent in one case, the ISAPnP one.
It does this with the SET_NETDEV_DEV function. It should register with the device
hierarchy in two additional cases: standard (non-PnP) ISA and EISA.
- Currently they appear here:
/sys/devices/virtual/net/eth0 (standard ISA)
/sys/devices/virtual/net/eth1 (EISA)
- Rather, they should instead be here:
/sys/devices/isa/3c509.0/net/eth0 (standard ISA)
/sys/devices/pci0000:00/0000:00:07.0/00:04/net/eth1 (EISA)
Tested on ISA and EISA boards.
Signed-off-by: Matthew Whitehead <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/3com/3c509.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/ethernet/3com/3c509.c
+++ b/drivers/net/ethernet/3com/3c509.c
@@ -309,6 +309,7 @@ static int __devinit el3_isa_match(struc
if (!dev)
return -ENOMEM;
+ SET_NETDEV_DEV(dev, pdev);
netdev_boot_setup_check(dev);
if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-isa")) {
@@ -704,6 +705,7 @@ static int __init el3_eisa_probe (struct
return -ENOMEM;
}
+ SET_NETDEV_DEV(dev, device);
netdev_boot_setup_check(dev);
el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_EISA);
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 093162553c33e9479283e107b4431378271c735d ]
Before escaping RCU protected section and adding packet into
prequeue, make sure the dst is refcounted.
Reported-by: Mike Galbraith <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/tcp.h | 1 +
1 file changed, 1 insertion(+)
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -948,6 +948,7 @@ static inline int tcp_prequeue(struct so
if (sysctl_tcp_low_latency || !tp->ucopy.task)
return 0;
+ skb_dst_force(skb);
__skb_queue_tail(&tp->ucopy.prequeue, skb);
tp->ucopy.memory += skb->truesize;
if (tp->ucopy.memory > sk->sk_rcvbuf) {
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjørn Mork <[email protected]>
[ Upstream commit cc6ba5fdaabea7a7b28de3ba1e0fe54d92232fe5 ]
We normally trust and use the CDC functional descriptors provided by a
number of devices. But some of these will erroneously list the address
reserved for the device end of the link. Attempting to use this on
both the device and host side will naturally not work.
Work around this bug by ignoring the functional descriptor and assign a
random address instead in this case.
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/qmi_wwan.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -175,6 +175,9 @@ err:
return status;
}
+/* default ethernet address used by the modem */
+static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3};
+
/* Make up an ethernet header if the packet doesn't have one.
*
* A firmware bug common among several devices cause them to send raw
@@ -342,6 +345,12 @@ static int qmi_wwan_bind_shared(struct u
/* save subdriver struct for suspend/resume wrappers */
dev->data[0] = (unsigned long)subdriver;
+ /* Never use the same address on both ends of the link, even
+ * if the buggy firmware told us to.
+ */
+ if (!compare_ether_addr(dev->net->dev_addr, default_modem_addr))
+ eth_hw_addr_random(dev->net);
+
/* make MAC addr easily distinguishable from an IP header */
if (possibly_iphdr(dev->net->dev_addr)) {
dev->net->dev_addr[0] |= 0x02; /* set local assignment bit */
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thommy Jakobsson <[email protected]>
commit 73b82bf0bfbf58e6ff328d3726934370585f6e78 upstream.
Add handling of rx descriptor underflow. This fixes a fault that could
happen on slow machines, where data is received faster than the CPU can
handle. In such a case the device will use up all rx descriptors and
refuse to send any more data before confirming that it is ok. This
patch enables necessary interrupt to discover such a situation and will
handle them by dropping everything in the ring buffer.
Reviewed-by: Michael Buesch <[email protected]>
Signed-off-by: Thommy Jakobsson <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/b43/dma.c | 19 +++++++++++++++++
drivers/net/wireless/b43/dma.h | 4 ++-
drivers/net/wireless/b43/main.c | 43 ++++++++++++++++------------------------
3 files changed, 40 insertions(+), 26 deletions(-)
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1733,6 +1733,25 @@ drop_recycle_buffer:
sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize);
}
+void b43_dma_handle_rx_overflow(struct b43_dmaring *ring)
+{
+ int current_slot, previous_slot;
+
+ B43_WARN_ON(ring->tx);
+
+ /* Device has filled all buffers, drop all packets and let TCP
+ * decrease speed.
+ * Decrement RX index by one will let the device to see all slots
+ * as free again
+ */
+ /*
+ *TODO: How to increase rx_drop in mac80211?
+ */
+ current_slot = ring->ops->get_current_rxslot(ring);
+ previous_slot = prev_slot(ring, current_slot);
+ ring->ops->set_current_rxslot(ring, previous_slot);
+}
+
void b43_dma_rx(struct b43_dmaring *ring)
{
const struct b43_dma_ops *ops = ring->ops;
--- a/drivers/net/wireless/b43/dma.h
+++ b/drivers/net/wireless/b43/dma.h
@@ -9,7 +9,7 @@
/* DMA-Interrupt reasons. */
#define B43_DMAIRQ_FATALMASK ((1 << 10) | (1 << 11) | (1 << 12) \
| (1 << 14) | (1 << 15))
-#define B43_DMAIRQ_NONFATALMASK (1 << 13)
+#define B43_DMAIRQ_RDESC_UFLOW (1 << 13)
#define B43_DMAIRQ_RX_DONE (1 << 16)
/*** 32-bit DMA Engine. ***/
@@ -295,6 +295,8 @@ int b43_dma_tx(struct b43_wldev *dev,
void b43_dma_handle_txstatus(struct b43_wldev *dev,
const struct b43_txstatus *status);
+void b43_dma_handle_rx_overflow(struct b43_dmaring *ring);
+
void b43_dma_rx(struct b43_dmaring *ring);
void b43_dma_direct_fifo_rx(struct b43_wldev *dev,
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1895,30 +1895,18 @@ static void b43_do_interrupt_thread(stru
}
}
- if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK |
- B43_DMAIRQ_NONFATALMASK))) {
- if (merged_dma_reason & B43_DMAIRQ_FATALMASK) {
- b43err(dev->wl, "Fatal DMA error: "
- "0x%08X, 0x%08X, 0x%08X, "
- "0x%08X, 0x%08X, 0x%08X\n",
- dma_reason[0], dma_reason[1],
- dma_reason[2], dma_reason[3],
- dma_reason[4], dma_reason[5]);
- b43err(dev->wl, "This device does not support DMA "
+ if (unlikely(merged_dma_reason & (B43_DMAIRQ_FATALMASK))) {
+ b43err(dev->wl,
+ "Fatal DMA error: 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X, 0x%08X\n",
+ dma_reason[0], dma_reason[1],
+ dma_reason[2], dma_reason[3],
+ dma_reason[4], dma_reason[5]);
+ b43err(dev->wl, "This device does not support DMA "
"on your system. It will now be switched to PIO.\n");
- /* Fall back to PIO transfers if we get fatal DMA errors! */
- dev->use_pio = true;
- b43_controller_restart(dev, "DMA error");
- return;
- }
- if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
- b43err(dev->wl, "DMA error: "
- "0x%08X, 0x%08X, 0x%08X, "
- "0x%08X, 0x%08X, 0x%08X\n",
- dma_reason[0], dma_reason[1],
- dma_reason[2], dma_reason[3],
- dma_reason[4], dma_reason[5]);
- }
+ /* Fall back to PIO transfers if we get fatal DMA errors! */
+ dev->use_pio = true;
+ b43_controller_restart(dev, "DMA error");
+ return;
}
if (unlikely(reason & B43_IRQ_UCODE_DEBUG))
@@ -1937,6 +1925,11 @@ static void b43_do_interrupt_thread(stru
handle_irq_noise(dev);
/* Check the DMA reason registers for received data. */
+ if (dma_reason[0] & B43_DMAIRQ_RDESC_UFLOW) {
+ if (B43_DEBUG)
+ b43warn(dev->wl, "RX descriptor underrun\n");
+ b43_dma_handle_rx_overflow(dev->dma.rx_ring);
+ }
if (dma_reason[0] & B43_DMAIRQ_RX_DONE) {
if (b43_using_pio_transfers(dev))
b43_pio_rx(dev->pio.rx_queue);
@@ -1994,7 +1987,7 @@ static irqreturn_t b43_do_interrupt(stru
return IRQ_NONE;
dev->dma_reason[0] = b43_read32(dev, B43_MMIO_DMA0_REASON)
- & 0x0001DC00;
+ & 0x0001FC00;
dev->dma_reason[1] = b43_read32(dev, B43_MMIO_DMA1_REASON)
& 0x0000DC00;
dev->dma_reason[2] = b43_read32(dev, B43_MMIO_DMA2_REASON)
@@ -3122,7 +3115,7 @@ static int b43_chip_init(struct b43_wlde
b43_write32(dev, 0x018C, 0x02000000);
}
b43_write32(dev, B43_MMIO_GEN_IRQ_REASON, 0x00004000);
- b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
+ b43_write32(dev, B43_MMIO_DMA0_IRQ_MASK, 0x0001FC00);
b43_write32(dev, B43_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
b43_write32(dev, B43_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
b43_write32(dev, B43_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Drake <[email protected]>
commit ccd384b10420ac81ba3fb9b0a7d18272c7173552 upstream.
A small bug in this code was causing the ALLMULTI filter to be set
when in fact we were just wanting to program a selective multicast list
to the hardware.
Fix that bug and remove a redundant if condition in the code that
follows.
This fixes wakeup behaviour when multicast WOL is enabled. Previously,
all multicast packets would wake up the system. Now, only those that the
host intended to receive trigger wakeups.
Signed-off-by: Daniel Drake <[email protected]>
Acked-by: Bing Zhao <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/mwifiex/sta_ioctl.c | 21 ++++++---------------
1 file changed, 6 insertions(+), 15 deletions(-)
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -105,7 +105,7 @@ int mwifiex_request_set_multicast_list(s
} else {
/* Multicast */
priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_PROMISCUOUS_ENABLE;
- if (mcast_list->mode == MWIFIEX_MULTICAST_MODE) {
+ if (mcast_list->mode == MWIFIEX_ALL_MULTI_MODE) {
dev_dbg(priv->adapter->dev,
"info: Enabling All Multicast!\n");
priv->curr_pkt_filter |=
@@ -117,20 +117,11 @@ int mwifiex_request_set_multicast_list(s
dev_dbg(priv->adapter->dev,
"info: Set multicast list=%d\n",
mcast_list->num_multicast_addr);
- /* Set multicast addresses to firmware */
- if (old_pkt_filter == priv->curr_pkt_filter) {
- /* Send request to firmware */
- ret = mwifiex_send_cmd_async(priv,
- HostCmd_CMD_MAC_MULTICAST_ADR,
- HostCmd_ACT_GEN_SET, 0,
- mcast_list);
- } else {
- /* Send request to firmware */
- ret = mwifiex_send_cmd_async(priv,
- HostCmd_CMD_MAC_MULTICAST_ADR,
- HostCmd_ACT_GEN_SET, 0,
- mcast_list);
- }
+ /* Send multicast addresses to firmware */
+ ret = mwifiex_send_cmd_async(priv,
+ HostCmd_CMD_MAC_MULTICAST_ADR,
+ HostCmd_ACT_GEN_SET, 0,
+ mcast_list);
}
}
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bing Zhao <[email protected]>
commit 48795424acff7215d5eac0b52793a2c1eb3a6283 upstream.
When the XO-4 with 8787 wireless is woken up due to wake-on-WLAN
mwifiex is often flooded with "not allowed while suspended" messages
and the interface is unusable.
[ 202.171609] int: sdio_ireg = 0x1
[ 202.180700] info: mwifiex_process_hs_config: auto cancelling host
sleep since there is interrupt from the firmware
[ 202.201880] event: wakeup device...
[ 202.211452] event: hs_deactivated
[ 202.514638] info: --- Rx: Data packet ---
[ 202.514753] data: 4294957544 BSS(0-0): Data <= kernel
[ 202.514825] PREP_CMD: device in suspended state
[ 202.514839] data: dequeuing the packet ec7248c0 ec4869c0
[ 202.514886] mwifiex_write_data_sync: not allowed while suspended
[ 202.514886] host_to_card, write iomem (1) failed: -1
[ 202.514917] mwifiex_write_data_sync: not allowed while suspended
[ 202.514936] host_to_card, write iomem (2) failed: -1
[ 202.514949] mwifiex_write_data_sync: not allowed while suspended
[ 202.514965] host_to_card, write iomem (3) failed: -1
[ 202.514976] mwifiex_write_data_async failed: 0xFFFFFFFF
This can be readily reproduced when putting the XO-4 in a loop where
it goes to sleep due to inactivity, but then wakes up due to an
incoming ping. The error is hit within an hour or two.
This issue happens when an interrupt comes in early while host sleep
is still activated. Driver handles this case by auto cancelling host
sleep. However is_suspended flag is still set which prevents any cmd
or data from being sent to firmware. Fix it by clearing is_suspended
flag in this path.
Reported-by: Daniel Drake <[email protected]>
Tested-by: Daniel Drake <[email protected]>
Signed-off-by: Bing Zhao <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/mwifiex/cmdevt.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -1084,6 +1084,7 @@ mwifiex_process_hs_config(struct mwifiex
adapter->if_ops.wakeup(adapter);
adapter->hs_activated = false;
adapter->is_hs_configured = false;
+ adapter->is_suspended = false;
mwifiex_hs_activated_event(mwifiex_get_priv(adapter,
MWIFIEX_BSS_ROLE_ANY),
false);
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lachlan McIlroy <[email protected]>
commit e6155736ad76b2070652745f9e54cdea3f0d8567 upstream.
In the case where we are allocating for a non-extent file,
we must limit the groups we allocate from to those below
2^32 blocks, and ext4_mb_regular_allocator() attempts to
do this initially by putting a cap on ngroups for the
subsequent search loop.
However, the initial target group comes in from the
allocation context (ac), and it may already be beyond
the artificially limited ngroups. In this case,
the limit
if (group == ngroups)
group = 0;
at the top of the loop is never true, and the loop will
run away.
Catch this case inside the loop and reset the search to
start at group 0.
[[email protected]: add commit msg & comments]
Signed-off-by: Lachlan McIlroy <[email protected]>
Signed-off-by: Eric Sandeen <[email protected]>
Signed-off-by: "Theodore Ts'o" <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ext4/mballoc.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1980,7 +1980,11 @@ repeat:
group = ac->ac_g_ex.fe_group;
for (i = 0; i < ngroups; group++, i++) {
- if (group == ngroups)
+ /*
+ * Artificially restricted ngroups for non-extent
+ * files makes group > ngroups possible on first loop.
+ */
+ if (group >= ngroups)
group = 0;
/* This now checks without needing the buddy page */
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
commit 4ef69d0394cba8caa9f75d3f2e53429bfb8b3045 upstream.
If no keycache slots are available, ath_key_config can return -ENOSPC.
If the key index is not checked for errors, it can lead to logspam that
looks like this: "ath: wiphy0: keyreset: keycache entry 228 out of range"
This can cause follow-up errors if the invalid keycache index gets
used for tx.
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/main.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1711,6 +1711,7 @@ static int ath9k_sta_add(struct ieee8021
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_node *an = (struct ath_node *) sta->drv_priv;
struct ieee80211_key_conf ps_key = { };
+ int key;
ath_node_attach(sc, sta, vif);
@@ -1718,7 +1719,9 @@ static int ath9k_sta_add(struct ieee8021
vif->type != NL80211_IFTYPE_AP_VLAN)
return 0;
- an->ps_key = ath_key_config(common, vif, sta, &ps_key);
+ key = ath_key_config(common, vif, sta, &ps_key);
+ if (key > 0)
+ an->ps_key = key;
return 0;
}
@@ -1735,6 +1738,7 @@ static void ath9k_del_ps_key(struct ath_
return;
ath_key_delete(common, &ps_key);
+ an->ps_key = 0;
}
static int ath9k_sta_remove(struct ieee80211_hw *hw,
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robert Jennings <[email protected]>
commit 120496ac2d2d60aee68d3123a68169502a85f4b5 upstream.
This patch brings online all threads which are present but not online
prior to migration/hibernation. After migration/hibernation those
threads are taken back offline.
During migration/hibernation all online CPUs must call H_JOIN, this is
required by the hypervisor. Without this patch, threads that are offline
(H_CEDE'd) will not be woken to make the H_JOIN call and the OS will be
deadlocked (all threads either JOIN'd or CEDE'd).
Signed-off-by: Robert Jennings <[email protected]>
Signed-off-by: Benjamin Herrenschmidt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/include/asm/rtas.h | 2
arch/powerpc/kernel/rtas.c | 113 +++++++++++++++++++++++++++++++
arch/powerpc/platforms/pseries/suspend.c | 22 ++++++
3 files changed, 137 insertions(+)
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -262,6 +262,8 @@ extern void rtas_progress(char *s, unsig
extern void rtas_initialize(void);
extern int rtas_suspend_cpu(struct rtas_suspend_me_data *data);
extern int rtas_suspend_last_cpu(struct rtas_suspend_me_data *data);
+extern int rtas_online_cpus_mask(cpumask_var_t cpus);
+extern int rtas_offline_cpus_mask(cpumask_var_t cpus);
extern int rtas_ibm_suspend_me(struct rtas_args *);
struct rtc_time;
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/capability.h>
#include <linux/delay.h>
+#include <linux/cpu.h>
#include <linux/smp.h>
#include <linux/completion.h>
#include <linux/cpumask.h>
@@ -808,6 +809,95 @@ static void rtas_percpu_suspend_me(void
__rtas_suspend_cpu((struct rtas_suspend_me_data *)info, 1);
}
+enum rtas_cpu_state {
+ DOWN,
+ UP,
+};
+
+#ifndef CONFIG_SMP
+static int rtas_cpu_state_change_mask(enum rtas_cpu_state state,
+ cpumask_var_t cpus)
+{
+ if (!cpumask_empty(cpus)) {
+ cpumask_clear(cpus);
+ return -EINVAL;
+ } else
+ return 0;
+}
+#else
+/* On return cpumask will be altered to indicate CPUs changed.
+ * CPUs with states changed will be set in the mask,
+ * CPUs with status unchanged will be unset in the mask. */
+static int rtas_cpu_state_change_mask(enum rtas_cpu_state state,
+ cpumask_var_t cpus)
+{
+ int cpu;
+ int cpuret = 0;
+ int ret = 0;
+
+ if (cpumask_empty(cpus))
+ return 0;
+
+ for_each_cpu(cpu, cpus) {
+ switch (state) {
+ case DOWN:
+ cpuret = cpu_down(cpu);
+ break;
+ case UP:
+ cpuret = cpu_up(cpu);
+ break;
+ }
+ if (cpuret) {
+ pr_debug("%s: cpu_%s for cpu#%d returned %d.\n",
+ __func__,
+ ((state == UP) ? "up" : "down"),
+ cpu, cpuret);
+ if (!ret)
+ ret = cpuret;
+ if (state == UP) {
+ /* clear bits for unchanged cpus, return */
+ cpumask_shift_right(cpus, cpus, cpu);
+ cpumask_shift_left(cpus, cpus, cpu);
+ break;
+ } else {
+ /* clear bit for unchanged cpu, continue */
+ cpumask_clear_cpu(cpu, cpus);
+ }
+ }
+ }
+
+ return ret;
+}
+#endif
+
+int rtas_online_cpus_mask(cpumask_var_t cpus)
+{
+ int ret;
+
+ ret = rtas_cpu_state_change_mask(UP, cpus);
+
+ if (ret) {
+ cpumask_var_t tmp_mask;
+
+ if (!alloc_cpumask_var(&tmp_mask, GFP_TEMPORARY))
+ return ret;
+
+ /* Use tmp_mask to preserve cpus mask from first failure */
+ cpumask_copy(tmp_mask, cpus);
+ rtas_offline_cpus_mask(tmp_mask);
+ free_cpumask_var(tmp_mask);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(rtas_online_cpus_mask);
+
+int rtas_offline_cpus_mask(cpumask_var_t cpus)
+{
+ return rtas_cpu_state_change_mask(DOWN, cpus);
+}
+EXPORT_SYMBOL(rtas_offline_cpus_mask);
+
int rtas_ibm_suspend_me(struct rtas_args *args)
{
long state;
@@ -815,6 +905,8 @@ int rtas_ibm_suspend_me(struct rtas_args
unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
struct rtas_suspend_me_data data;
DECLARE_COMPLETION_ONSTACK(done);
+ cpumask_var_t offline_mask;
+ int cpuret;
if (!rtas_service_present("ibm,suspend-me"))
return -ENOSYS;
@@ -838,11 +930,24 @@ int rtas_ibm_suspend_me(struct rtas_args
return 0;
}
+ if (!alloc_cpumask_var(&offline_mask, GFP_TEMPORARY))
+ return -ENOMEM;
+
atomic_set(&data.working, 0);
atomic_set(&data.done, 0);
atomic_set(&data.error, 0);
data.token = rtas_token("ibm,suspend-me");
data.complete = &done;
+
+ /* All present CPUs must be online */
+ cpumask_andnot(offline_mask, cpu_present_mask, cpu_online_mask);
+ cpuret = rtas_online_cpus_mask(offline_mask);
+ if (cpuret) {
+ pr_err("%s: Could not bring present CPUs online.\n", __func__);
+ atomic_set(&data.error, cpuret);
+ goto out;
+ }
+
stop_topology_update();
/* Call function on all CPUs. One of us will make the
@@ -858,6 +963,14 @@ int rtas_ibm_suspend_me(struct rtas_args
start_topology_update();
+ /* Take down CPUs not online prior to suspend */
+ cpuret = rtas_offline_cpus_mask(offline_mask);
+ if (cpuret)
+ pr_warn("%s: Could not restore CPUs to offline state.\n",
+ __func__);
+
+out:
+ free_cpumask_var(offline_mask);
return atomic_read(&data.error);
}
#else /* CONFIG_PPC_PSERIES */
--- a/arch/powerpc/platforms/pseries/suspend.c
+++ b/arch/powerpc/platforms/pseries/suspend.c
@@ -16,6 +16,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/suspend.h>
#include <linux/stat.h>
@@ -126,11 +127,15 @@ static ssize_t store_hibernate(struct de
struct device_attribute *attr,
const char *buf, size_t count)
{
+ cpumask_var_t offline_mask;
int rc;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
+ if (!alloc_cpumask_var(&offline_mask, GFP_TEMPORARY))
+ return -ENOMEM;
+
stream_id = simple_strtoul(buf, NULL, 16);
do {
@@ -140,15 +145,32 @@ static ssize_t store_hibernate(struct de
} while (rc == -EAGAIN);
if (!rc) {
+ /* All present CPUs must be online */
+ cpumask_andnot(offline_mask, cpu_present_mask,
+ cpu_online_mask);
+ rc = rtas_online_cpus_mask(offline_mask);
+ if (rc) {
+ pr_err("%s: Could not bring present CPUs online.\n",
+ __func__);
+ goto out;
+ }
+
stop_topology_update();
rc = pm_suspend(PM_SUSPEND_MEM);
start_topology_update();
+
+ /* Take down CPUs not online prior to suspend */
+ if (!rtas_offline_cpus_mask(offline_mask))
+ pr_warn("%s: Could not restore CPUs to offline "
+ "state.\n", __func__);
}
stream_id = 0;
if (!rc)
rc = count;
+out:
+ free_cpumask_var(offline_mask);
return rc;
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anton Blanchard <[email protected]>
commit cdee3904b4ce7c03d1013ed6dd704b43ae7fc2e9 upstream.
Commit b05d8447e782 (audit: inline audit_syscall_entry to reduce
burden on archs) changed audit_syscall_entry to check for a dummy
context before calling __audit_syscall_entry. Unfortunately the dummy
context state is maintained in __audit_syscall_entry so once set it
never gets cleared, even if the audit rules change.
As a result, if there are no auditing rules when a process starts
then it will never be subject to any rules added later. x86 doesn't
see this because it has an assembly fast path that calls directly into
__audit_syscall_entry.
I noticed this issue when working on audit performance optimisations.
I wrote a set of simple test cases available at:
http://ozlabs.org/~anton/junkcode/audit_tests.tar.gz
02_new_rule.py fails without the patch and passes with it. The
test case clears all rules, starts a process, adds a rule then
verifies the process produces a syscall audit record.
Signed-off-by: Anton Blanchard <[email protected]>
Signed-off-by: Eric Paris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/audit.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -480,7 +480,7 @@ static inline void audit_syscall_entry(i
unsigned long a1, unsigned long a2,
unsigned long a3)
{
- if (unlikely(!audit_dummy_context()))
+ if (unlikely(current->audit_context))
__audit_syscall_entry(arch, major, a0, a1, a2, a3);
}
static inline void audit_syscall_exit(void *pt_regs)
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tirupathi Reddy <[email protected]>
commit 42a5cf46cd56f46267d2a9fcf2655f4078cd3042 upstream.
An inactive timer's base can refer to a offline cpu's base.
In the current code, cpu_base's lock is blindly reinitialized each
time a CPU is brought up. If a CPU is brought online during the period
that another thread is trying to modify an inactive timer on that CPU
with holding its timer base lock, then the lock will be reinitialized
under its feet. This leads to following SPIN_BUG().
<0> BUG: spinlock already unlocked on CPU#3, kworker/u:3/1466
<0> lock: 0xe3ebe000, .magic: dead4ead, .owner: kworker/u:3/1466, .owner_cpu: 1
<4> [<c0013dc4>] (unwind_backtrace+0x0/0x11c) from [<c026e794>] (do_raw_spin_unlock+0x40/0xcc)
<4> [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) from [<c076c160>] (_raw_spin_unlock+0x8/0x30)
<4> [<c076c160>] (_raw_spin_unlock+0x8/0x30) from [<c009b858>] (mod_timer+0x294/0x310)
<4> [<c009b858>] (mod_timer+0x294/0x310) from [<c00a5e04>] (queue_delayed_work_on+0x104/0x120)
<4> [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) from [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c)
<4> [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) from [<c04d8780>] (sdhci_disable+0x40/0x48)
<4> [<c04d8780>] (sdhci_disable+0x40/0x48) from [<c04bf300>] (mmc_release_host+0x4c/0xb0)
<4> [<c04bf300>] (mmc_release_host+0x4c/0xb0) from [<c04c7aac>] (mmc_sd_detect+0x90/0xfc)
<4> [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) from [<c04c2504>] (mmc_rescan+0x7c/0x2c4)
<4> [<c04c2504>] (mmc_rescan+0x7c/0x2c4) from [<c00a6a7c>] (process_one_work+0x27c/0x484)
<4> [<c00a6a7c>] (process_one_work+0x27c/0x484) from [<c00a6e94>] (worker_thread+0x210/0x3b0)
<4> [<c00a6e94>] (worker_thread+0x210/0x3b0) from [<c00aad9c>] (kthread+0x80/0x8c)
<4> [<c00aad9c>] (kthread+0x80/0x8c) from [<c000ea80>] (kernel_thread_exit+0x0/0x8)
As an example, this particular crash occurred when CPU #3 is executing
mod_timer() on an inactive timer whose base is refered to offlined CPU
#2. The code locked the timer_base corresponding to CPU #2. Before it
could proceed, CPU #2 came online and reinitialized the spinlock
corresponding to its base. Thus now CPU #3 held a lock which was
reinitialized. When CPU #3 finally ended up unlocking the old cpu_base
corresponding to CPU #2, we hit the above SPIN_BUG().
CPU #0 CPU #3 CPU #2
------ ------- -------
..... ...... <Offline>
mod_timer()
lock_timer_base
spin_lock_irqsave(&base->lock)
cpu_up(2) ..... ......
init_timers_cpu()
.... ..... spin_lock_init(&base->lock)
..... spin_unlock_irqrestore(&base->lock) ......
<spin_bug>
Allocation of per_cpu timer vector bases is done only once under
"tvec_base_done[]" check. In the current code, spinlock_initialization
of base->lock isn't under this check. When a CPU is up each time the
base lock is reinitialized. Move base spinlock initialization under
the check.
Signed-off-by: Tirupathi Reddy <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/timer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1680,12 +1680,12 @@ static int __cpuinit init_timers_cpu(int
boot_done = 1;
base = &boot_tvec_bases;
}
+ spin_lock_init(&base->lock);
tvec_base_done[cpu] = 1;
} else {
base = per_cpu(tvec_bases, cpu);
}
- spin_lock_init(&base->lock);
for (j = 0; j < TVN_SIZE; j++) {
INIT_LIST_HEAD(base->tv5.vec + j);
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Bottomley <[email protected]>
commit 39c60a0948cc06139e2fbfe084f83cb7e7deae3b upstream.
Some arrays synchronize their full non volatile cache when the sd driver sends
a SYNCHRONIZE CACHE command. Unfortunately, they can have Terrabytes of this
and we send a SYNCHRONIZE CACHE for every barrier if an array reports it has a
writeback cache. This leads to massive slowdowns on journalled filesystems.
The fix is to allow userspace to turn off the writeback cache setting as a
temporary measure (i.e. without doing the MODE SELECT to write it back to the
device), so even though the device reported it has a writeback cache, the
user, knowing that the cache is non volatile and all they care about is
filesystem correctness, can turn that bit off in the kernel and avoid the
performance ruinous (and safety irrelevant) SYNCHRONIZE CACHE commands.
The way you do this is add a 'temporary' prefix when performing the usual
cache setting operations, so
echo temporary write through > /sys/class/scsi_disk/<disk>/cache_type
Reported-by: Ric Wheeler <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/sd.c | 20 ++++++++++++++++++++
drivers/scsi/sd.h | 1 +
2 files changed, 21 insertions(+)
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -140,6 +140,7 @@ sd_store_cache_type(struct device *dev,
char *buffer_data;
struct scsi_mode_data data;
struct scsi_sense_hdr sshdr;
+ const char *temp = "temporary ";
int len;
if (sdp->type != TYPE_DISK)
@@ -148,6 +149,13 @@ sd_store_cache_type(struct device *dev,
* it's not worth the risk */
return -EINVAL;
+ if (strncmp(buf, temp, sizeof(temp) - 1) == 0) {
+ buf += sizeof(temp) - 1;
+ sdkp->cache_override = 1;
+ } else {
+ sdkp->cache_override = 0;
+ }
+
for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
len = strlen(sd_cache_types[i]);
if (strncmp(sd_cache_types[i], buf, len) == 0 &&
@@ -160,6 +168,13 @@ sd_store_cache_type(struct device *dev,
return -EINVAL;
rcd = ct & 0x01 ? 1 : 0;
wce = ct & 0x02 ? 1 : 0;
+
+ if (sdkp->cache_override) {
+ sdkp->WCE = wce;
+ sdkp->RCD = rcd;
+ return count;
+ }
+
if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
SD_MAX_RETRIES, &data, NULL))
return -EINVAL;
@@ -2126,6 +2141,10 @@ sd_read_cache_type(struct scsi_disk *sdk
int old_rcd = sdkp->RCD;
int old_dpofua = sdkp->DPOFUA;
+
+ if (sdkp->cache_override)
+ return;
+
first_len = 4;
if (sdp->skip_ms_page_8) {
if (sdp->type == TYPE_RBC)
@@ -2607,6 +2626,7 @@ static void sd_probe_async(void *data, a
sdkp->capacity = 0;
sdkp->media_present = 1;
sdkp->write_prot = 0;
+ sdkp->cache_override = 0;
sdkp->WCE = 0;
sdkp->RCD = 0;
sdkp->ATO = 0;
--- a/drivers/scsi/sd.h
+++ b/drivers/scsi/sd.h
@@ -67,6 +67,7 @@ struct scsi_disk {
u8 protection_type;/* Data Integrity Field */
u8 provisioning_mode;
unsigned ATO : 1; /* state of disk ATO bit */
+ unsigned cache_override : 1; /* temp override of WCE,RCD */
unsigned WCE : 1; /* state of disk WCE bit */
unsigned RCD : 1; /* state of disk RCD bit, unused */
unsigned DPOFUA : 1; /* state of disk DPOFUA bit */
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bob Moore <[email protected]>
commit 61388f9e5d93053cf399a356414f31f9b4814c6d upstream.
Can only happen under these conditions: 1) The DSDT version is 1,
meaning integers are 32-bits. 2) The field is between 33 and 64
bits long.
It applies cleanly back to ACPICA 20100806+ (Linux v2.6.37+).
Signed-off-by: Bob Moore <[email protected]>
Signed-off-by: Lv Zheng <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/acpi/acpica/exfldio.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -722,7 +722,19 @@ acpi_ex_extract_from_field(union acpi_op
if ((obj_desc->common_field.start_field_bit_offset == 0) &&
(obj_desc->common_field.bit_length == access_bit_width)) {
- status = acpi_ex_field_datum_io(obj_desc, 0, buffer, ACPI_READ);
+ if (buffer_length >= sizeof(u64)) {
+ status =
+ acpi_ex_field_datum_io(obj_desc, 0, buffer,
+ ACPI_READ);
+ } else {
+ /* Use raw_datum (u64) to handle buffers < 64 bits */
+
+ status =
+ acpi_ex_field_datum_io(obj_desc, 0, &raw_datum,
+ ACPI_READ);
+ ACPI_MEMCPY(buffer, &raw_datum, buffer_length);
+ }
+
return_ACPI_STATUS(status);
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "J. Bruce Fields" <[email protected]>
commit 9f415eb25574db4b73a9a712a4438e41dc284922 upstream.
The Linux client is using CLAIM_FH to implement regular opens, not just
recovery cases, so it depends on the server to check permissions
correctly.
Therefore the owner override, which may make sense in the delegation
recovery case, isn't right in the CLAIM_FH case.
Symptoms: on a client with 49f9a0fafd844c32f2abada047c0b9a5ba0d6255
"NFSv4.1: Enable open-by-filehandle", Bryan noticed this:
touch test.txt
chmod 000 test.txt
echo test > test.txt
succeeding.
Reported-by: Bryan Schumaker <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/nfsd/nfs4proc.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -270,6 +270,7 @@ static __be32
do_open_fhandle(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_open *open)
{
__be32 status;
+ int accmode = 0;
/* We don't know the target directory, and therefore can not
* set the change info
@@ -283,9 +284,19 @@ do_open_fhandle(struct svc_rqst *rqstp,
open->op_truncate = (open->op_iattr.ia_valid & ATTR_SIZE) &&
(open->op_iattr.ia_size == 0);
+ /*
+ * In the delegation case, the client is telling us about an
+ * open that it *already* performed locally, some time ago. We
+ * should let it succeed now if possible.
+ *
+ * In the case of a CLAIM_FH open, on the other hand, the client
+ * may be counting on us to enforce permissions (the Linux 4.1
+ * client uses this for normal opens, for example).
+ */
+ if (open->op_claim_type == NFS4_OPEN_CLAIM_DELEG_CUR_FH)
+ accmode = NFSD_MAY_OWNER_OVERRIDE;
- status = do_open_permission(rqstp, current_fh, open,
- NFSD_MAY_OWNER_OVERRIDE);
+ status = do_open_permission(rqstp, current_fh, open, accmode);
return status;
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shuah Khan <[email protected]>
commit 7783819920ca52fc582a2782f654fe6ed373f465 upstream.
The error in lis3lv02_poweron() is harmless in the resume path, so
we should ignore it. It is inline with the other usages of lis3lv02_poweron()
and matches the 3.0 code for this routine. This patch is in suse git and
might have missed making it into the mainline.
opensuse - commit id: 66ccdac87c322cf7af12bddba8c805af640b1cff
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Matthew Garrett <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/platform/x86/hp_accel.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -362,7 +362,8 @@ static int lis3lv02d_suspend(struct acpi
static int lis3lv02d_resume(struct acpi_device *device)
{
- return lis3lv02d_poweron(&lis3_dev);
+ lis3lv02d_poweron(&lis3_dev);
+ return 0;
}
#else
#define lis3lv02d_suspend NULL
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wei Yongjun <[email protected]>
commit 09e8b813897a0f85bb401435d009228644c81214 upstream.
Return -ENOMEM instead of success if unable to allocate pending
exception mempool in snapshot_ctr.
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Alasdair G Kergon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/dm-snap.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -1117,6 +1117,7 @@ static int snapshot_ctr(struct dm_target
s->pending_pool = mempool_create_slab_pool(MIN_IOS, pending_cache);
if (!s->pending_pool) {
ti->error = "Could not allocate mempool for pending exceptions";
+ r = -ENOMEM;
goto bad_pending_pool;
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang YanQing <[email protected]>
commit 2195b063f6609e4c6268f291683902f25eaf9aa6 upstream.
The interrupt handler azx_interrupt will call azx_update_rirb,
which may call snd_hda_queue_unsol_event, snd_hda_queue_unsol_event
will dereference chip->bus pointer.
The problem is we alloc chip->bus in azx_codec_create
which will be called after we enable IRQ and enable unsolicited
event in azx_probe.
This will cause Oops due dereference NULL pointer. I meet it, good luck:)
[Rearranged the NULL check before the tracepoint and added another
NULL check of bus->workq -- tiwai]
Signed-off-by: Wang YanQing <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/hda_codec.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -617,6 +617,9 @@ int snd_hda_queue_unsol_event(struct hda
struct hda_bus_unsolicited *unsol;
unsigned int wp;
+ if (!bus || !bus->workq)
+ return 0;
+
trace_hda_unsol_event(bus, res, res_ex);
unsol = bus->unsol;
if (!unsol)
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gleb Natapov <[email protected]>
commit 8d76c49e9ffeee839bc0b7a3278a23f99101263e upstream.
The invalid guest state emulation loop does not check halt_request
which causes 100% cpu loop while guest is in halt and in invalid
state, but more serious issue is that this leaves halt_request set, so
random instruction emulated by vm86 #GP exit can be interpreted
as halt which causes guest hang. Fix both problems by handling
halt_request in emulation loop.
Reported-by: Tomas Papan <[email protected]>
Tested-by: Tomas Papan <[email protected]>
Reviewed-by: Paolo Bonzini <[email protected]>
Signed-off-by: Gleb Natapov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -4889,6 +4889,12 @@ static int handle_invalid_guest_state(st
if (err != EMULATE_DONE)
return 0;
+ if (vcpu->arch.halt_request) {
+ vcpu->arch.halt_request = 0;
+ ret = kvm_emulate_halt(vcpu);
+ goto out;
+ }
+
if (signal_pending(current))
goto out;
if (need_resched())
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter <[email protected]>
commit 4495e46fe18f198366961bb2b324a694ef8a9b44 upstream.
The missing break here means that we always return early and the
function is a no-op.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/codecs/wm8994.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -2824,6 +2824,7 @@ static int wm8994_aif3_hw_params(struct
default:
return 0;
}
+ break;
default:
return 0;
}
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aaro Koskinen <[email protected]>
commit e65f131a14726e5f1b880a528271a52428e5b3a5 upstream.
Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver)
broke the SPI display/panel driver probe on RX-51/N900. The exact cause is
not fully understood, but it seems to be related to the probe order. SPI
communication to the panel driver (spi1.2) fails unless the touchscreen
(spi1.0) has been probed/initialized before. When the omap2-mcspi driver
was converted to a platform driver, it resulted in that the devices are
probed immediately after the board registers them in the order they are
listed in the board file.
Fix the issue by moving the touchscreen before the panel in the SPI
device list.
The patch fixes the following failure:
[ 1.260955] acx565akm spi1.2: invalid display ID
[ 1.265899] panel-acx565akm display0: acx_panel_probe panel detect error
[ 1.273071] omapdss CORE error: driver probe failed: -19
Tested-by: Sebastian Reichel <[email protected]>
Signed-off-by: Aaro Koskinen <[email protected]>
Cc: Pali Rohár <[email protected]>
Cc: Joni Lapilainen <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: Felipe Balbi <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -63,11 +63,11 @@
#define RX51_TSC2005_RESET_GPIO 104
#define RX51_TSC2005_IRQ_GPIO 100
-/* list all spi devices here */
+/* List all SPI devices here. Note that the list/probe order seems to matter! */
enum {
RX51_SPI_WL1251,
- RX51_SPI_MIPID, /* LCD panel */
RX51_SPI_TSC2005, /* Touch Controller */
+ RX51_SPI_MIPID, /* LCD panel */
};
static struct wl12xx_platform_data wl1251_pdata;
At Fri, 17 May 2013 14:46:35 -0700,
Greg Kroah-Hartman wrote:
>
> This is the start of the stable review cycle for the 3.4.46 release.
> There are 50 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun May 19 21:37:09 UTC 2013.
> Anything received after that time might be too late.
This kernel can be built and boot without any problem.
Building a kernel with this kernel also works fine.
- Build Machine: debian wheezy x86_64
CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
memory: 8GB
- Test machine: debian wheezy x86_64(KVM guest on the Build Machine)
vCPU: x2
memory: 2GB
Thanks,
Satoru
On Sun, May 19, 2013 at 08:16:14PM +0900, Satoru Takeuchi wrote:
> At Fri, 17 May 2013 14:46:35 -0700,
> Greg Kroah-Hartman wrote:
> >
> > This is the start of the stable review cycle for the 3.4.46 release.
> > There are 50 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun May 19 21:37:09 UTC 2013.
> > Anything received after that time might be too late.
>
> This kernel can be built and boot without any problem.
> Building a kernel with this kernel also works fine.
Thanks for testing.
greg k-h