The current implementation of the `__rt_sigaction` reference computed an
absolute offset relative to the mapped base of the VDSO. While this can
be handled in the medlow model, the medany model cannot handle this as
it is meant to be position independent. The current implementation
relied on the BFD linker relaxing the PC-relative relocation into an
absolute relocation as it was a near-zero address allowing it to be
referenced relative to `zero`.
We now extract the offsets and create a generated header allowing the
build with LLVM and lld to succeed as we no longer depend on the linker
rewriting address references near zero. This change was largely
modelled after the ARM64 target which does something similar.
Signed-off-by: Saleem Abdulrasool <[email protected]>
---
arch/riscv/Makefile | 4 ++++
arch/riscv/include/asm/vdso.h | 14 ++----------
arch/riscv/kernel/vdso/Makefile | 25 ++++++++++------------
arch/riscv/kernel/vdso/gen_vdso_offsets.sh | 5 +++++
arch/riscv/kernel/vdso/so2s.sh | 6 ------
5 files changed, 22 insertions(+), 32 deletions(-)
create mode 100755 arch/riscv/kernel/vdso/gen_vdso_offsets.sh
delete mode 100755 arch/riscv/kernel/vdso/so2s.sh
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index bc74afdbf31e..e026b2d0a5a4 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -108,6 +108,10 @@ PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
+prepare: vdso_prepare
+vdso_prepare: prepare0
+ $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
+
ifneq ($(CONFIG_XIP_KERNEL),y)
ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
KBUILD_IMAGE := $(boot)/loader.bin
diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h
index 1453a2f563bc..d8d003c2b5a3 100644
--- a/arch/riscv/include/asm/vdso.h
+++ b/arch/riscv/include/asm/vdso.h
@@ -9,25 +9,15 @@
#define _ASM_RISCV_VDSO_H
#include <linux/types.h>
+#include <generated/vdso-offsets.h>
#ifndef CONFIG_GENERIC_TIME_VSYSCALL
struct vdso_data {
};
#endif
-/*
- * The VDSO symbols are mapped into Linux so we can just use regular symbol
- * addressing to get their offsets in userspace. The symbols are mapped at an
- * offset of 0, but since the linker must support setting weak undefined
- * symbols to the absolute address 0 it also happens to support other low
- * addresses even when the code model suggests those low addresses would not
- * otherwise be availiable.
- */
#define VDSO_SYMBOL(base, name) \
-({ \
- extern const char __vdso_##name[]; \
- (void __user *)((unsigned long)(base) + __vdso_##name); \
-})
+ (void __user *)((unsigned long)(base) + __vdso_##name##_offset)
asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t);
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index 24d936c147cd..f8cb9144a284 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -23,10 +23,10 @@ ifneq ($(c-gettimeofday-y),)
endif
# Build rules
-targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds vdso-syms.S
+targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds
obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
-obj-y += vdso.o vdso-syms.o
+obj-y += vdso.o
CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
# Disable -pg to prevent insert call site
@@ -43,20 +43,22 @@ $(obj)/vdso.o: $(obj)/vdso.so
# link rule for the .so file, .lds has to be first
$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
$(call if_changed,vdsold)
-LDFLAGS_vdso.so.dbg = -shared -s -soname=linux-vdso.so.1 \
+LDFLAGS_vdso.so.dbg = -shared -S -soname=linux-vdso.so.1 \
--build-id=sha1 --hash-style=both --eh-frame-hdr
-# We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO. With ld --just-symbols we can then
-# refer to these symbols in the kernel code rather than hand-coded addresses.
-$(obj)/vdso-syms.S: $(obj)/vdso.so FORCE
- $(call if_changed,so2s)
-
# strip rule for the .so file
$(obj)/%.so: OBJCOPYFLAGS := -S
$(obj)/%.so: $(obj)/%.so.dbg FORCE
$(call if_changed,objcopy)
+# Generate VDSO offsets using helper script
+gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
+quiet_cmd_vdsosym = VDSOSYM $@
+ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
+
+include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
+ $(call if_changed,vdsosym)
+
# actual build commands
# The DSO images are built using a special linker script
# Make sure only to export the intended __vdso_xxx symbol offsets.
@@ -65,11 +67,6 @@ quiet_cmd_vdsold = VDSOLD $@
$(OBJCOPY) $(patsubst %, -G __vdso_%, $(vdso-syms)) [email protected] $@ && \
rm [email protected]
-# Extracts symbol offsets from the VDSO, converting them into an assembly file
-# that contains the same symbols at the same offsets.
-quiet_cmd_so2s = SO2S $@
- cmd_so2s = $(NM) -D $< | $(srctree)/$(src)/so2s.sh > $@
-
# install commands for the unstripped file
quiet_cmd_vdso_install = INSTALL $@
cmd_vdso_install = cp $(obj)/[email protected] $(MODLIB)/vdso/$@
diff --git a/arch/riscv/kernel/vdso/gen_vdso_offsets.sh b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
new file mode 100755
index 000000000000..c2e5613f3495
--- /dev/null
+++ b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+LC_ALL=C
+sed -n -e 's/^[0]\+\(0[0-9a-fA-F]*\) . \(__vdso_[a-zA-Z0-9_]*\)$/\#define \2_offset\t0x\1/p'
diff --git a/arch/riscv/kernel/vdso/so2s.sh b/arch/riscv/kernel/vdso/so2s.sh
deleted file mode 100755
index e64cb6d9440e..000000000000
--- a/arch/riscv/kernel/vdso/so2s.sh
+++ /dev/null
@@ -1,6 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0+
-# Copyright 2020 Palmer Dabbelt <[email protected]>
-
-sed 's!\([0-9a-f]*\) T \([a-z0-9_]*\)\(@@LINUX_4.15\)*!.global \2\n.set \2,0x\1!' \
-| grep '^\.'
--
2.32.0.554.ge1b32706d8-goog
On 8/4/2021 10:32 AM, 'Saleem Abdulrasool' via Clang Built Linux wrote:
> The current implementation of the `__rt_sigaction` reference computed an
> absolute offset relative to the mapped base of the VDSO. While this can
> be handled in the medlow model, the medany model cannot handle this as
> it is meant to be position independent. The current implementation
> relied on the BFD linker relaxing the PC-relative relocation into an
> absolute relocation as it was a near-zero address allowing it to be
> referenced relative to `zero`.
>
> We now extract the offsets and create a generated header allowing the
> build with LLVM and lld to succeed as we no longer depend on the linker
> rewriting address references near zero. This change was largely
> modelled after the ARM64 target which does something similar.
>
> Signed-off-by: Saleem Abdulrasool <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
> ---
> arch/riscv/Makefile | 4 ++++
> arch/riscv/include/asm/vdso.h | 14 ++----------
> arch/riscv/kernel/vdso/Makefile | 25 ++++++++++------------
> arch/riscv/kernel/vdso/gen_vdso_offsets.sh | 5 +++++
> arch/riscv/kernel/vdso/so2s.sh | 6 ------
> 5 files changed, 22 insertions(+), 32 deletions(-)
> create mode 100755 arch/riscv/kernel/vdso/gen_vdso_offsets.sh
> delete mode 100755 arch/riscv/kernel/vdso/so2s.sh
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index bc74afdbf31e..e026b2d0a5a4 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -108,6 +108,10 @@ PHONY += vdso_install
> vdso_install:
> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>
> +prepare: vdso_prepare
> +vdso_prepare: prepare0
> + $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
> +
> ifneq ($(CONFIG_XIP_KERNEL),y)
> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> KBUILD_IMAGE := $(boot)/loader.bin
> diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h
> index 1453a2f563bc..d8d003c2b5a3 100644
> --- a/arch/riscv/include/asm/vdso.h
> +++ b/arch/riscv/include/asm/vdso.h
> @@ -9,25 +9,15 @@
> #define _ASM_RISCV_VDSO_H
>
> #include <linux/types.h>
> +#include <generated/vdso-offsets.h>
>
> #ifndef CONFIG_GENERIC_TIME_VSYSCALL
> struct vdso_data {
> };
> #endif
>
> -/*
> - * The VDSO symbols are mapped into Linux so we can just use regular symbol
> - * addressing to get their offsets in userspace. The symbols are mapped at an
> - * offset of 0, but since the linker must support setting weak undefined
> - * symbols to the absolute address 0 it also happens to support other low
> - * addresses even when the code model suggests those low addresses would not
> - * otherwise be availiable.
> - */
> #define VDSO_SYMBOL(base, name) \
> -({ \
> - extern const char __vdso_##name[]; \
> - (void __user *)((unsigned long)(base) + __vdso_##name); \
> -})
> + (void __user *)((unsigned long)(base) + __vdso_##name##_offset)
>
> asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t);
>
> diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
> index 24d936c147cd..f8cb9144a284 100644
> --- a/arch/riscv/kernel/vdso/Makefile
> +++ b/arch/riscv/kernel/vdso/Makefile
> @@ -23,10 +23,10 @@ ifneq ($(c-gettimeofday-y),)
> endif
>
> # Build rules
> -targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds vdso-syms.S
> +targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds
> obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
>
> -obj-y += vdso.o vdso-syms.o
> +obj-y += vdso.o
> CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
>
> # Disable -pg to prevent insert call site
> @@ -43,20 +43,22 @@ $(obj)/vdso.o: $(obj)/vdso.so
> # link rule for the .so file, .lds has to be first
> $(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
> $(call if_changed,vdsold)
> -LDFLAGS_vdso.so.dbg = -shared -s -soname=linux-vdso.so.1 \
> +LDFLAGS_vdso.so.dbg = -shared -S -soname=linux-vdso.so.1 \
> --build-id=sha1 --hash-style=both --eh-frame-hdr
>
> -# We also create a special relocatable object that should mirror the symbol
> -# table and layout of the linked DSO. With ld --just-symbols we can then
> -# refer to these symbols in the kernel code rather than hand-coded addresses.
> -$(obj)/vdso-syms.S: $(obj)/vdso.so FORCE
> - $(call if_changed,so2s)
> -
> # strip rule for the .so file
> $(obj)/%.so: OBJCOPYFLAGS := -S
> $(obj)/%.so: $(obj)/%.so.dbg FORCE
> $(call if_changed,objcopy)
>
> +# Generate VDSO offsets using helper script
> +gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
> +quiet_cmd_vdsosym = VDSOSYM $@
> + cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
> +
> +include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
> + $(call if_changed,vdsosym)
> +
> # actual build commands
> # The DSO images are built using a special linker script
> # Make sure only to export the intended __vdso_xxx symbol offsets.
> @@ -65,11 +67,6 @@ quiet_cmd_vdsold = VDSOLD $@
> $(OBJCOPY) $(patsubst %, -G __vdso_%, $(vdso-syms)) [email protected] $@ && \
> rm [email protected]
>
> -# Extracts symbol offsets from the VDSO, converting them into an assembly file
> -# that contains the same symbols at the same offsets.
> -quiet_cmd_so2s = SO2S $@
> - cmd_so2s = $(NM) -D $< | $(srctree)/$(src)/so2s.sh > $@
> -
> # install commands for the unstripped file
> quiet_cmd_vdso_install = INSTALL $@
> cmd_vdso_install = cp $(obj)/[email protected] $(MODLIB)/vdso/$@
> diff --git a/arch/riscv/kernel/vdso/gen_vdso_offsets.sh b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
> new file mode 100755
> index 000000000000..c2e5613f3495
> --- /dev/null
> +++ b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
> @@ -0,0 +1,5 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0
> +
> +LC_ALL=C
> +sed -n -e 's/^[0]\+\(0[0-9a-fA-F]*\) . \(__vdso_[a-zA-Z0-9_]*\)$/\#define \2_offset\t0x\1/p'
> diff --git a/arch/riscv/kernel/vdso/so2s.sh b/arch/riscv/kernel/vdso/so2s.sh
> deleted file mode 100755
> index e64cb6d9440e..000000000000
> --- a/arch/riscv/kernel/vdso/so2s.sh
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0+
> -# Copyright 2020 Palmer Dabbelt <[email protected]>
> -
> -sed 's!\([0-9a-f]*\) T \([a-z0-9_]*\)\(@@LINUX_4.15\)*!.global \2\n.set \2,0x\1!' \
> -| grep '^\.'
>
On Wed, 04 Aug 2021 10:32:14 PDT (-0700), [email protected] wrote:
> The current implementation of the `__rt_sigaction` reference computed an
> absolute offset relative to the mapped base of the VDSO. While this can
> be handled in the medlow model, the medany model cannot handle this as
> it is meant to be position independent. The current implementation
> relied on the BFD linker relaxing the PC-relative relocation into an
> absolute relocation as it was a near-zero address allowing it to be
> referenced relative to `zero`.
>
> We now extract the offsets and create a generated header allowing the
> build with LLVM and lld to succeed as we no longer depend on the linker
> rewriting address references near zero. This change was largely
> modelled after the ARM64 target which does something similar.
>
> Signed-off-by: Saleem Abdulrasool <[email protected]>
> ---
> arch/riscv/Makefile | 4 ++++
> arch/riscv/include/asm/vdso.h | 14 ++----------
> arch/riscv/kernel/vdso/Makefile | 25 ++++++++++------------
> arch/riscv/kernel/vdso/gen_vdso_offsets.sh | 5 +++++
> arch/riscv/kernel/vdso/so2s.sh | 6 ------
> 5 files changed, 22 insertions(+), 32 deletions(-)
> create mode 100755 arch/riscv/kernel/vdso/gen_vdso_offsets.sh
> delete mode 100755 arch/riscv/kernel/vdso/so2s.sh
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index bc74afdbf31e..e026b2d0a5a4 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -108,6 +108,10 @@ PHONY += vdso_install
> vdso_install:
> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>
> +prepare: vdso_prepare
> +vdso_prepare: prepare0
> + $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
> +
> ifneq ($(CONFIG_XIP_KERNEL),y)
> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> KBUILD_IMAGE := $(boot)/loader.bin
> diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h
> index 1453a2f563bc..d8d003c2b5a3 100644
> --- a/arch/riscv/include/asm/vdso.h
> +++ b/arch/riscv/include/asm/vdso.h
> @@ -9,25 +9,15 @@
> #define _ASM_RISCV_VDSO_H
>
> #include <linux/types.h>
> +#include <generated/vdso-offsets.h>
>
> #ifndef CONFIG_GENERIC_TIME_VSYSCALL
> struct vdso_data {
> };
> #endif
>
> -/*
> - * The VDSO symbols are mapped into Linux so we can just use regular symbol
> - * addressing to get their offsets in userspace. The symbols are mapped at an
> - * offset of 0, but since the linker must support setting weak undefined
> - * symbols to the absolute address 0 it also happens to support other low
> - * addresses even when the code model suggests those low addresses would not
> - * otherwise be availiable.
> - */
> #define VDSO_SYMBOL(base, name) \
> -({ \
> - extern const char __vdso_##name[]; \
> - (void __user *)((unsigned long)(base) + __vdso_##name); \
> -})
> + (void __user *)((unsigned long)(base) + __vdso_##name##_offset)
>
> asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t);
>
> diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
> index 24d936c147cd..f8cb9144a284 100644
> --- a/arch/riscv/kernel/vdso/Makefile
> +++ b/arch/riscv/kernel/vdso/Makefile
> @@ -23,10 +23,10 @@ ifneq ($(c-gettimeofday-y),)
> endif
>
> # Build rules
> -targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds vdso-syms.S
> +targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds
> obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
>
> -obj-y += vdso.o vdso-syms.o
> +obj-y += vdso.o
> CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
>
> # Disable -pg to prevent insert call site
> @@ -43,20 +43,22 @@ $(obj)/vdso.o: $(obj)/vdso.so
> # link rule for the .so file, .lds has to be first
> $(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
> $(call if_changed,vdsold)
> -LDFLAGS_vdso.so.dbg = -shared -s -soname=linux-vdso.so.1 \
> +LDFLAGS_vdso.so.dbg = -shared -S -soname=linux-vdso.so.1 \
> --build-id=sha1 --hash-style=both --eh-frame-hdr
>
> -# We also create a special relocatable object that should mirror the symbol
> -# table and layout of the linked DSO. With ld --just-symbols we can then
> -# refer to these symbols in the kernel code rather than hand-coded addresses.
> -$(obj)/vdso-syms.S: $(obj)/vdso.so FORCE
> - $(call if_changed,so2s)
> -
> # strip rule for the .so file
> $(obj)/%.so: OBJCOPYFLAGS := -S
> $(obj)/%.so: $(obj)/%.so.dbg FORCE
> $(call if_changed,objcopy)
>
> +# Generate VDSO offsets using helper script
> +gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
> +quiet_cmd_vdsosym = VDSOSYM $@
> + cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
> +
> +include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
> + $(call if_changed,vdsosym)
> +
> # actual build commands
> # The DSO images are built using a special linker script
> # Make sure only to export the intended __vdso_xxx symbol offsets.
> @@ -65,11 +67,6 @@ quiet_cmd_vdsold = VDSOLD $@
> $(OBJCOPY) $(patsubst %, -G __vdso_%, $(vdso-syms)) [email protected] $@ && \
> rm [email protected]
>
> -# Extracts symbol offsets from the VDSO, converting them into an assembly file
> -# that contains the same symbols at the same offsets.
> -quiet_cmd_so2s = SO2S $@
> - cmd_so2s = $(NM) -D $< | $(srctree)/$(src)/so2s.sh > $@
> -
> # install commands for the unstripped file
> quiet_cmd_vdso_install = INSTALL $@
> cmd_vdso_install = cp $(obj)/[email protected] $(MODLIB)/vdso/$@
> diff --git a/arch/riscv/kernel/vdso/gen_vdso_offsets.sh b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
> new file mode 100755
> index 000000000000..c2e5613f3495
> --- /dev/null
> +++ b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
> @@ -0,0 +1,5 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0
> +
> +LC_ALL=C
> +sed -n -e 's/^[0]\+\(0[0-9a-fA-F]*\) . \(__vdso_[a-zA-Z0-9_]*\)$/\#define \2_offset\t0x\1/p'
> diff --git a/arch/riscv/kernel/vdso/so2s.sh b/arch/riscv/kernel/vdso/so2s.sh
> deleted file mode 100755
> index e64cb6d9440e..000000000000
> --- a/arch/riscv/kernel/vdso/so2s.sh
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0+
> -# Copyright 2020 Palmer Dabbelt <[email protected]>
> -
> -sed 's!\([0-9a-f]*\) T \([a-z0-9_]*\)\(@@LINUX_4.15\)*!.global \2\n.set \2,0x\1!' \
> -| grep '^\.'
This is on for-next. Thanks!
On Aug 04 2021, Saleem Abdulrasool wrote:
> The current implementation of the `__rt_sigaction` reference computed an
> absolute offset relative to the mapped base of the VDSO. While this can
> be handled in the medlow model, the medany model cannot handle this as
> it is meant to be position independent. The current implementation
> relied on the BFD linker relaxing the PC-relative relocation into an
> absolute relocation as it was a near-zero address allowing it to be
> referenced relative to `zero`.
>
> We now extract the offsets and create a generated header allowing the
> build with LLVM and lld to succeed as we no longer depend on the linker
> rewriting address references near zero. This change was largely
> modelled after the ARM64 target which does something similar.
>
> Signed-off-by: Saleem Abdulrasool <[email protected]>
I think this broke out-of-tree module builds.
https://build.opensuse.org/package/live_build_log/openSUSE:Factory:RISCV/rtl8812au/standard/riscv64
+ make -j4
make ARCH=riscv CROSS_COMPILE= -C /usr/src/linux-obj/riscv64/default M=/home/abuild/rpmbuild/BUILD/rtl8812au-5.9.3.2+git20210427.6ef5d8f/obj/default modules
make[1]: Entering directory '/usr/src/linux-5.14.14-1-obj/riscv64/default'
mkdir: cannot create directory 'arch/riscv/kernel': Permission denied
LDS arch/riscv/kernel/vdso/vdso.lds
AS arch/riscv/kernel/vdso/rt_sigreturn.o
CC arch/riscv/kernel/vdso/vgettimeofday.o
AS arch/riscv/kernel/vdso/getcpu.o
mkdir: cannot create directory 'arch/riscv/kernel': Permission denied
LDS arch/riscv/kernel/vdso/vdso.lds
AS arch/riscv/kernel/vdso/rt_sigreturn.o
CC arch/riscv/kernel/vdso/vgettimeofday.o
AS arch/riscv/kernel/vdso/getcpu.o
cc1: fatal error: opening output file arch/riscv/kernel/vdso/vdso.lds: No such file or directory
compilation terminated.
make[3]: *** [/usr/src/linux-5.14.14-1/scripts/Makefile.build:366: arch/riscv/kernel/vdso/vdso.lds] Error 1
Andreas.
--
Andreas Schwab, [email protected]
GPG Key fingerprint = 7578 EB47 D4E5 4D69 2510 2552 DF73 E780 A9DA AEC1
"And now for something completely different."
When building external modules, vdso_prepare should not be run. If the
kernel sources are read-only, it will fail.
Fixes: fde9c59aebaf ("riscv: explicitly use symbol offsets for VDSO")
Signed-off-by: Andreas Schwab <[email protected]>
---
arch/riscv/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 0eb4568fbd29..41f3a75fe2ec 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -108,11 +108,13 @@ PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
+ifeq ($(KBUILD_EXTMOD),)
ifeq ($(CONFIG_MMU),y)
prepare: vdso_prepare
vdso_prepare: prepare0
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
endif
+endif
ifneq ($(CONFIG_XIP_KERNEL),y)
ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
--
2.33.1
--
Andreas Schwab, SUSE Labs, [email protected]
GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7
"And now for something completely different."
On Tue, Nov 02, 2021 at 04:51:43PM +0100, Andreas Schwab wrote:
> When building external modules, vdso_prepare should not be run. If the
> kernel sources are read-only, it will fail.
>
> Fixes: fde9c59aebaf ("riscv: explicitly use symbol offsets for VDSO")
> Signed-off-by: Andreas Schwab <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
> ---
> arch/riscv/Makefile | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index 0eb4568fbd29..41f3a75fe2ec 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -108,11 +108,13 @@ PHONY += vdso_install
> vdso_install:
> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>
> +ifeq ($(KBUILD_EXTMOD),)
> ifeq ($(CONFIG_MMU),y)
> prepare: vdso_prepare
> vdso_prepare: prepare0
> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
> endif
> +endif
>
> ifneq ($(CONFIG_XIP_KERNEL),y)
> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
> --
> 2.33.1
>
>
> --
> Andreas Schwab, SUSE Labs, [email protected]
> GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7
> "And now for something completely different."
>
> _______________________________________________
> linux-riscv mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-riscv
>
On Tue, 02 Nov 2021 08:51:43 PDT (-0700), [email protected] wrote:
> When building external modules, vdso_prepare should not be run. If the
> kernel sources are read-only, it will fail.
>
> Fixes: fde9c59aebaf ("riscv: explicitly use symbol offsets for VDSO")
> Signed-off-by: Andreas Schwab <[email protected]>
> ---
> arch/riscv/Makefile | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index 0eb4568fbd29..41f3a75fe2ec 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -108,11 +108,13 @@ PHONY += vdso_install
> vdso_install:
> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>
> +ifeq ($(KBUILD_EXTMOD),)
> ifeq ($(CONFIG_MMU),y)
> prepare: vdso_prepare
> vdso_prepare: prepare0
> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
> endif
> +endif
>
> ifneq ($(CONFIG_XIP_KERNEL),y)
> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
Thanks, this is on fixes.