From: jasontao <[email protected]>
Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for
Glenfly Gpus.
- In default_bdl_pos_adj, set bdl to 128 as Glenfly Gpus have hardware
limitation, need to increase hdac interrupt interval.
- In azx_first_init, enable polling mode for Glenfly Gpu. When the codec
complete the command, it sends interrupt and writes response entries to
memory, howerver, the write requests sometimes are not actually
synchronized to memory when driver handle hdac interrupt on Glenfly Gpus.
If the RIRB status is not updated in the interrupt handler,
azx_rirb_get_response keeps trying to recevie a response from rirb until
1s timeout. Enabling polling mode for Glenfly Gpu can fix the issue.
- In patch_gf_hdmi, set Glenlfy Gpu Codec's no_sticky_stream as it need
driver to do actual clean-ups for the linked codec when switch from one
codec to another.
Signed-off-by: jasontao <[email protected]>
Signed-off-by: Reaper Li <[email protected]>
---
v3: fix warnings for the patch.
v2: add some comments for code and details in the commit log.
sound/pci/hda/hda_intel.c | 21 +++++++++++++++++++++
sound/pci/hda/patch_hdmi.c | 22 ++++++++++++++++++++++
2 files changed, 43 insertions(+)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 77a592f21..31e16feaa 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -227,6 +227,7 @@ enum {
AZX_DRIVER_ATI,
AZX_DRIVER_ATIHDMI,
AZX_DRIVER_ATIHDMI_NS,
+ AZX_DRIVER_GFHDMI,
AZX_DRIVER_VIA,
AZX_DRIVER_SIS,
AZX_DRIVER_ULI,
@@ -349,6 +350,7 @@ static const char * const driver_short_names[] = {
[AZX_DRIVER_ATI] = "HDA ATI SB",
[AZX_DRIVER_ATIHDMI] = "HDA ATI HDMI",
[AZX_DRIVER_ATIHDMI_NS] = "HDA ATI HDMI",
+ [AZX_DRIVER_GFHDMI] = "HDA GF HDMI",
[AZX_DRIVER_VIA] = "HDA VIA VT82xx",
[AZX_DRIVER_SIS] = "HDA SIS966",
[AZX_DRIVER_ULI] = "HDA ULI M5461",
@@ -1743,6 +1745,12 @@ static int default_bdl_pos_adj(struct azx *chip)
}
switch (chip->driver_type) {
+ /*
+ * increase the bdl size for Glenfly Gpus for hardware
+ * limitation on hdac interrupt interval
+ */
+ case AZX_DRIVER_GFHDMI:
+ return 128;
case AZX_DRIVER_ICH:
case AZX_DRIVER_PCH:
return 1;
@@ -1858,6 +1866,12 @@ static int azx_first_init(struct azx *chip)
pci_write_config_dword(pci, PCI_BASE_ADDRESS_1, 0);
}
#endif
+ /*
+ * Fix response write request not synced to memory when handle
+ * hdac interrupt on Glenfly Gpus
+ */
+ if (chip->driver_type == AZX_DRIVER_GFHDMI)
+ bus->polling_mode = 1;
err = pcim_iomap_regions(pci, 1 << 0, "ICH HD audio");
if (err < 0)
@@ -1959,6 +1973,7 @@ static int azx_first_init(struct azx *chip)
chip->playback_streams = ATIHDMI_NUM_PLAYBACK;
chip->capture_streams = ATIHDMI_NUM_CAPTURE;
break;
+ case AZX_DRIVER_GFHDMI:
case AZX_DRIVER_GENERIC:
default:
chip->playback_streams = ICH6_NUM_PLAYBACK;
@@ -2724,6 +2739,12 @@ static const struct pci_device_id azx_ids[] = {
{ PCI_DEVICE(0x1002, 0xab38),
.driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS |
AZX_DCAPS_PM_RUNTIME },
+ /* GLENFLY */
+ { PCI_DEVICE(0x6766, PCI_ANY_ID),
+ .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
+ .class_mask = 0xffffff,
+ .driver_data = AZX_DRIVER_GFHDMI | AZX_DCAPS_POSFIX_LPIB |
+ AZX_DCAPS_NO_MSI | AZX_DCAPS_NO_64BIT },
/* VIA VT8251/VT8237A */
{ PCI_DEVICE(0x1106, 0x3288), .driver_data = AZX_DRIVER_VIA },
/* VIA GFX VT7122/VX900 */
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 4ffa3a59f..0a1daef9d 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -4489,6 +4489,22 @@ static int patch_via_hdmi(struct hda_codec *codec)
return patch_simple_hdmi(codec, VIAHDMI_CVT_NID, VIAHDMI_PIN_NID);
}
+static int patch_gf_hdmi(struct hda_codec *codec)
+{
+ int err;
+
+ err = patch_generic_hdmi(codec);
+ if (err)
+ return err;
+
+ /*
+ * Glenfly GPUs have two codecs, stream switches from one codec to
+ * another, need to do actual clean-ups in codec_cleanup_stream
+ */
+ codec->no_sticky_stream = 1;
+ return 0;
+}
+
/*
* patch entries
*/
@@ -4579,6 +4595,12 @@ HDA_CODEC_ENTRY(0x10de009f, "GPU 9f HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de00a0, "GPU a0 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de8001, "MCP73 HDMI", patch_nvhdmi_2ch),
HDA_CODEC_ENTRY(0x10de8067, "MCP67/68 HDMI", patch_nvhdmi_2ch),
+HDA_CODEC_ENTRY(0x67663d82, "Arise 82 HDMI/DP", patch_gf_hdmi),
+HDA_CODEC_ENTRY(0x67663d83, "Arise 83 HDMI/DP", patch_gf_hdmi),
+HDA_CODEC_ENTRY(0x67663d84, "Arise 84 HDMI/DP", patch_gf_hdmi),
+HDA_CODEC_ENTRY(0x67663d85, "Arise 85 HDMI/DP", patch_gf_hdmi),
+HDA_CODEC_ENTRY(0x67663d86, "Arise 86 HDMI/DP", patch_gf_hdmi),
+HDA_CODEC_ENTRY(0x67663d87, "Arise 87 HDMI/DP", patch_gf_hdmi),
HDA_CODEC_ENTRY(0x11069f80, "VX900 HDMI/DP", patch_via_hdmi),
HDA_CODEC_ENTRY(0x11069f81, "VX900 HDMI/DP", patch_via_hdmi),
HDA_CODEC_ENTRY(0x11069f84, "VX11 HDMI/DP", patch_generic_hdmi),
--
2.20.1
On Wed, 26 Apr 2023 03:30:59 +0200,
Reaper Li wrote:
>
> From: jasontao <[email protected]>
>
> Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for
> Glenfly Gpus.
>
> - In default_bdl_pos_adj, set bdl to 128 as Glenfly Gpus have hardware
> limitation, need to increase hdac interrupt interval.
> - In azx_first_init, enable polling mode for Glenfly Gpu. When the codec
> complete the command, it sends interrupt and writes response entries to
> memory, howerver, the write requests sometimes are not actually
> synchronized to memory when driver handle hdac interrupt on Glenfly Gpus.
> If the RIRB status is not updated in the interrupt handler,
> azx_rirb_get_response keeps trying to recevie a response from rirb until
> 1s timeout. Enabling polling mode for Glenfly Gpu can fix the issue.
> - In patch_gf_hdmi, set Glenlfy Gpu Codec's no_sticky_stream as it need
> driver to do actual clean-ups for the linked codec when switch from one
> codec to another.
>
> Signed-off-by: jasontao <[email protected]>
> Signed-off-by: Reaper Li <[email protected]>
> ---
> v3: fix warnings for the patch.
> v2: add some comments for code and details in the commit log.
Thanks, applied now.
Takashi