Just for fun I'm writing a driver for an old board I have lying around
(a Brooktrout Netaccess PRI-PCI ISDN primary rate board). One of the
amusing things it does it ask for various firmware modules when it's
booting.
As I receive these requests in the interrupt handler I'm trying to call
request_firmware_nowait to do the download.
But it complains:
[ 167.058933] pri: pri0: board wants file I990803.PKG (rev ) for module 1d
[ 167.058933] BUG: scheduling while atomic: swapper/0/0x00010000
[ 167.058933]
[ 167.058933] Pid: 0, comm: swapper Not tainted (2.6.26-2-686 #1)
[ 167.058933] EIP: 0060:[<c0114d68>] EFLAGS: 00000246 CPU: 1
[ 167.058933] EIP is at native_safe_halt+0x2/0x3
[ 167.058933] EAX: ef474000 EBX: c0102656 ECX: 0125b000 EDX: ffff6fbb
[ 167.058933] ESI: 00000001 EDI: 00000000 EBP: 00000000 ESP: ef475fa8
[ 167.058933] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 167.058933] CR0: 8005003b CR2: b7ee9264 CR3: 2e1c7000 CR4: 000006d0
[ 167.058933] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[ 167.058933] DR6: ffff0ff0 DR7: 00000400
[ 167.058933] [<c0102683>] default_idle+0x2d/0x53
[ 167.058933] [<c01025ce>] cpu_idle+0xab/0xcb
[ 167.058933] =======================
[ 167.058933] bad: scheduling from the idle thread!
[ 167.058933] Pid: 0, comm: swapper Not tainted 2.6.26-2-686 #1
[ 167.058933] [<c011edc0>] dequeue_task_idle+0x1f/0x28
[ 167.058933] [<c011817f>] dequeue_task+0xa/0x14
[ 167.058933] [<c01181a4>] deactivate_task+0x1b/0x30
[ 167.058933] [<c02b7e43>] schedule+0x121/0x66d
[ 167.058933] [<c01360ac>] getnstimeofday+0x37/0xbc
[ 167.058933] [<c02b852f>] schedule_timeout+0x13/0x86
[ 167.058933] [<c0134556>] ktime_get+0xd/0x21
[ 167.058933] [<c0119132>] hrtick_start_fair+0xeb/0x12c
[ 167.058933] [<c01188fe>] enqueue_task+0x52/0x5d
[ 167.058933] [<c02b7c55>] wait_for_common+0xaf/0x10f
[ 167.058933] [<c011b6ce>] default_wake_function+0x0/0x8
[ 167.058933] [<c0131810>] kthread_create+0x75/0xa8
[ 167.058933] [<f09a3331>] request_firmware_work_func+0x0/0x63 [firmware_class]
[ 167.058933] [<f09a3704>] request_firmware_nowait+0x9c/0xe0 [firmware_class]
[ 167.058933] [<f09a3331>] request_firmware_work_func+0x0/0x63 [firmware_class]
[ 167.058933] [<f0a64725>] pri_download+0x0/0x247 [pri]
[ 167.231311] [<f0a64608>] pri_interrupt+0x1fe/0x31b [pri]
[ 167.235301] [<f0a64725>] pri_download+0x0/0x247 [pri]
[ 167.235301] [<c015208e>] handle_IRQ_event+0x23/0x51
[ 167.235301] [<c015318d>] handle_fasteoi_irq+0x71/0xa4
[ 167.247302] [<c0105f3a>] do_IRQ+0x4d/0x63
[ 167.247302] [<c0102656>] default_idle+0x0/0x53
[ 167.247302] [<c01042a7>] common_interrupt+0x23/0x28
[ 167.247302] [<c0102656>] default_idle+0x0/0x53
[ 167.247302] [<c0114d68>] native_safe_halt+0x2/0x3
[ 167.247302] [<c0102683>] default_idle+0x2d/0x53
After that the system crashes:
[ 167.247302] BUG: unable to handle kernel NULL pointer dereference at 00000000
[ 167.247302] IP: [<00000000>]
[ 167.247302] *pde = 00000000
[ 167.247302] Oops: 0000 [#1] SMP
[ 167.247302] Modules linked in: pri firmware_class ipv6 loop parport_pc parport snd_pcm snd_timer snd soundcore snd_page_alloc serio_raw button shpchp pcspkr pci_hotplug psmouse i2c_piix4 sworks_agp i2c_core agpgart dcdbas evdev ext3 jbd mbcache sd_mod ide_cd_mod cdrom sg ide_pci_generic serverworks ide_core aic7xxx ata_generic ohci_hcd scsi_transport_spi floppy libata e100 mii usbcore scsi_mod dock e1000 thermal processor fan thermal_sys
[ 167.247302]
[ 167.247302] Pid: 2, comm: kthreadd Not tainted (2.6.26-2-686 #1)
[ 167.247302] EIP: 0060:[<00000000>] EFLAGS: 00010046 CPU: 0
[ 167.247302] EIP is at 0x0
[ 167.247302] EAX: c1615fa0 EBX: c02c4e20 ECX: 00000001 EDX: ef471500
[ 167.247302] ESI: ef471500 EDI: c1615fa0 EBP: 00000001 ESP: ef443f5c
[ 167.247302] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 167.247302] Process kthreadd (pid: 2, ti=ef442000 task=ef43f4e0 task.ti=ef442000)
[ 167.247302] Stack: c01188fe c1615fa0 ef471500 00000001 c0118924 ef471500 c1615fa0 c011b68c
[ 167.247302] 00000003 00000002 ef475e54 ef475e94 00000001 00000001 c01184a9 00000000
[ 167.247302] 00000003 ef475e9c ef475e98 ef475e9c 00000296 00000000 c011a618 00000000
[ 167.247302] Call Trace:
[ 167.247302] [<c01188fe>] enqueue_task+0x52/0x5d
[ 167.247302] [<c0118924>] activate_task+0x1b/0x26
[ 167.247302] [<c011b68c>] try_to_wake_up+0xaf/0xf1
[ 167.247302] [<c01184a9>] __wake_up_common+0x2e/0x58
[ 167.247302] [<c011a618>] complete+0x28/0x36
[ 167.247302] [<c0131773>] kthreadd+0x112/0x13a
[ 167.247302] [<c0131661>] kthreadd+0x0/0x13a
[ 167.247302] [<c01044f3>] kernel_thread_helper+0x7/0x10
[ 167.247302] =======================
[ 167.247302] Code: Bad EIP value.
[ 167.247302] EIP: [<00000000>] 0x0 SS:ESP 0068:ef443f5c
[ 167.247302] ---[ end trace 22fd0ce8ade70dbc ]---
[ 167.267303] [<c01025ce>] cpu_idle+0xab/0xcb
[ 167.267303] =======================
Am I being a naughty boy?
John Hughes <[email protected]> writes:
>
> Am I being a naughty boy?
Yes.
-Andi
--
[email protected] -- Speaking for myself only.
Andi Kleen wrote:
> John Hughes <[email protected]> writes:
>
>> Am I being a naughty boy?
>>
>
> Yes.
>
>
Buggeration. What an irritating restriction.
So I'll have to make a thread to do the firmware download, in which case
I can just use request_firmware instead of request_firmware_nowait.
Or can I use schedule_work?
On Mon, Apr 20, 2009 at 03:00:48PM +0200, John Hughes wrote:
> Andi Kleen wrote:
> >John Hughes <[email protected]> writes:
> >
> >>Am I being a naughty boy?
> >>
> >
> >Yes.
> >
> >
> Buggeration. What an irritating restriction.
>
> So I'll have to make a thread to do the firmware download, in which case
> I can just use request_firmware instead of request_firmware_nowait.
>
> Or can I use schedule_work?
That's what it is for yes.
-Andi
--
[email protected] -- Speaking for myself only.