This patchset imeplements the suggestion from Linus to move the
Kconfig and Makefile bits for AMD and Intel into their respective
directories.
v2: Rebase against v5.8-rc3. Dropped ---help--- changes from Kconfig as that was
dealt with in systemwide cleanup.
Jerry Snitselaar (2):
iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
iommu/amd: Move Kconfig and Makefile bits down into amd directory
Move AMD Kconfig and Makefile bits down into the amd directory
with the rest of the AMD specific files.
Cc: Joerg Roedel <[email protected]>
Cc: Suravee Suthikulpanit <[email protected]>
Signed-off-by: Jerry Snitselaar <[email protected]>
---
drivers/iommu/Kconfig | 45 +-------------------------------------
drivers/iommu/Makefile | 5 +----
drivers/iommu/amd/Kconfig | 44 +++++++++++++++++++++++++++++++++++++
drivers/iommu/amd/Makefile | 4 ++++
4 files changed, 50 insertions(+), 48 deletions(-)
create mode 100644 drivers/iommu/amd/Kconfig
create mode 100644 drivers/iommu/amd/Makefile
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 281cd6bd0fe0..24000e7ed0fa 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -132,50 +132,7 @@ config IOMMU_PGTABLES_L2
def_bool y
depends on MSM_IOMMU && MMU && SMP && CPU_DCACHE_DISABLE=n
-# AMD IOMMU support
-config AMD_IOMMU
- bool "AMD IOMMU support"
- select SWIOTLB
- select PCI_MSI
- select PCI_ATS
- select PCI_PRI
- select PCI_PASID
- select IOMMU_API
- select IOMMU_IOVA
- select IOMMU_DMA
- depends on X86_64 && PCI && ACPI
- help
- With this option you can enable support for AMD IOMMU hardware in
- your system. An IOMMU is a hardware component which provides
- remapping of DMA memory accesses from devices. With an AMD IOMMU you
- can isolate the DMA memory of different devices and protect the
- system from misbehaving device drivers or hardware.
-
- You can find out if your system has an AMD IOMMU if you look into
- your BIOS for an option to enable it or if you have an IVRS ACPI
- table.
-
-config AMD_IOMMU_V2
- tristate "AMD IOMMU Version 2 driver"
- depends on AMD_IOMMU
- select MMU_NOTIFIER
- help
- This option enables support for the AMD IOMMUv2 features of the IOMMU
- hardware. Select this option if you want to use devices that support
- the PCI PRI and PASID interface.
-
-config AMD_IOMMU_DEBUGFS
- bool "Enable AMD IOMMU internals in DebugFS"
- depends on AMD_IOMMU && IOMMU_DEBUGFS
- help
- !!!WARNING!!! !!!WARNING!!! !!!WARNING!!! !!!WARNING!!!
-
- DO NOT ENABLE THIS OPTION UNLESS YOU REALLY, -REALLY- KNOW WHAT YOU ARE DOING!!!
- Exposes AMD IOMMU device internals in DebugFS.
-
- This option is -NOT- intended for production environments, and should
- not generally be enabled.
-
+source "drivers/iommu/amd/Kconfig"
source "drivers/iommu/intel/Kconfig"
config IRQ_REMAP
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index 71dd2f382e78..f356bc12b1c7 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-obj-y += intel/
+obj-y += amd/ intel/
obj-$(CONFIG_IOMMU_API) += iommu.o
obj-$(CONFIG_IOMMU_API) += iommu-traces.o
obj-$(CONFIG_IOMMU_API) += iommu-sysfs.o
@@ -12,9 +12,6 @@ obj-$(CONFIG_IOASID) += ioasid.o
obj-$(CONFIG_IOMMU_IOVA) += iova.o
obj-$(CONFIG_OF_IOMMU) += of_iommu.o
obj-$(CONFIG_MSM_IOMMU) += msm_iommu.o
-obj-$(CONFIG_AMD_IOMMU) += amd/iommu.o amd/init.o amd/quirks.o
-obj-$(CONFIG_AMD_IOMMU_DEBUGFS) += amd/debugfs.o
-obj-$(CONFIG_AMD_IOMMU_V2) += amd/iommu_v2.o
obj-$(CONFIG_ARM_SMMU) += arm_smmu.o
arm_smmu-objs += arm-smmu.o arm-smmu-impl.o arm-smmu-qcom.o
obj-$(CONFIG_ARM_SMMU_V3) += arm-smmu-v3.o
diff --git a/drivers/iommu/amd/Kconfig b/drivers/iommu/amd/Kconfig
new file mode 100644
index 000000000000..1f061d91e0b8
--- /dev/null
+++ b/drivers/iommu/amd/Kconfig
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# AMD IOMMU support
+config AMD_IOMMU
+ bool "AMD IOMMU support"
+ select SWIOTLB
+ select PCI_MSI
+ select PCI_ATS
+ select PCI_PRI
+ select PCI_PASID
+ select IOMMU_API
+ select IOMMU_IOVA
+ select IOMMU_DMA
+ depends on X86_64 && PCI && ACPI
+ help
+ With this option you can enable support for AMD IOMMU hardware in
+ your system. An IOMMU is a hardware component which provides
+ remapping of DMA memory accesses from devices. With an AMD IOMMU you
+ can isolate the DMA memory of different devices and protect the
+ system from misbehaving device drivers or hardware.
+
+ You can find out if your system has an AMD IOMMU if you look into
+ your BIOS for an option to enable it or if you have an IVRS ACPI
+ table.
+
+config AMD_IOMMU_V2
+ tristate "AMD IOMMU Version 2 driver"
+ depends on AMD_IOMMU
+ select MMU_NOTIFIER
+ help
+ This option enables support for the AMD IOMMUv2 features of the IOMMU
+ hardware. Select this option if you want to use devices that support
+ the PCI PRI and PASID interface.
+
+config AMD_IOMMU_DEBUGFS
+ bool "Enable AMD IOMMU internals in DebugFS"
+ depends on AMD_IOMMU && IOMMU_DEBUGFS
+ help
+ !!!WARNING!!! !!!WARNING!!! !!!WARNING!!! !!!WARNING!!!
+
+ DO NOT ENABLE THIS OPTION UNLESS YOU REALLY, -REALLY- KNOW WHAT YOU ARE DOING!!!
+ Exposes AMD IOMMU device internals in DebugFS.
+
+ This option is -NOT- intended for production environments, and should
+ not generally be enabled.
diff --git a/drivers/iommu/amd/Makefile b/drivers/iommu/amd/Makefile
new file mode 100644
index 000000000000..dc5a2fa4fd37
--- /dev/null
+++ b/drivers/iommu/amd/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_AMD_IOMMU) += iommu.o init.o quirks.o
+obj-$(CONFIG_AMD_IOMMU_DEBUGFS) += debugfs.o
+obj-$(CONFIG_AMD_IOMMU_V2) += iommu_v2.o
--
2.27.0
Move Intel Kconfig and Makefile bits down into intel directory
with the rest of the Intel specific files.
Cc: Joerg Roedel <[email protected]>
Cc: Lu Baolu <[email protected]>
Signed-off-by: Jerry Snitselaar <[email protected]>
---
drivers/iommu/Kconfig | 86 +-----------------------------------
drivers/iommu/Makefile | 8 +---
drivers/iommu/intel/Kconfig | 86 ++++++++++++++++++++++++++++++++++++
drivers/iommu/intel/Makefile | 7 +++
4 files changed, 96 insertions(+), 91 deletions(-)
create mode 100644 drivers/iommu/intel/Kconfig
create mode 100644 drivers/iommu/intel/Makefile
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 6dc49ed8377a..281cd6bd0fe0 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -176,91 +176,7 @@ config AMD_IOMMU_DEBUGFS
This option is -NOT- intended for production environments, and should
not generally be enabled.
-# Intel IOMMU support
-config DMAR_TABLE
- bool
-
-config INTEL_IOMMU
- bool "Support for Intel IOMMU using DMA Remapping Devices"
- depends on PCI_MSI && ACPI && (X86 || IA64)
- select IOMMU_API
- select IOMMU_IOVA
- select NEED_DMA_MAP_STATE
- select DMAR_TABLE
- select SWIOTLB
- select IOASID
- help
- DMA remapping (DMAR) devices support enables independent address
- translations for Direct Memory Access (DMA) from devices.
- These DMA remapping devices are reported via ACPI tables
- and include PCI device scope covered by these DMA
- remapping devices.
-
-config INTEL_IOMMU_DEBUGFS
- bool "Export Intel IOMMU internals in Debugfs"
- depends on INTEL_IOMMU && IOMMU_DEBUGFS
- help
- !!!WARNING!!!
-
- DO NOT ENABLE THIS OPTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!!!
-
- Expose Intel IOMMU internals in Debugfs.
-
- This option is -NOT- intended for production environments, and should
- only be enabled for debugging Intel IOMMU.
-
-config INTEL_IOMMU_SVM
- bool "Support for Shared Virtual Memory with Intel IOMMU"
- depends on INTEL_IOMMU && X86_64
- select PCI_PASID
- select PCI_PRI
- select MMU_NOTIFIER
- select IOASID
- help
- Shared Virtual Memory (SVM) provides a facility for devices
- to access DMA resources through process address space by
- means of a Process Address Space ID (PASID).
-
-config INTEL_IOMMU_DEFAULT_ON
- def_bool y
- prompt "Enable Intel DMA Remapping Devices by default"
- depends on INTEL_IOMMU
- help
- Selecting this option will enable a DMAR device at boot time if
- one is found. If this option is not selected, DMAR support can
- be enabled by passing intel_iommu=on to the kernel.
-
-config INTEL_IOMMU_BROKEN_GFX_WA
- bool "Workaround broken graphics drivers (going away soon)"
- depends on INTEL_IOMMU && BROKEN && X86
- help
- Current Graphics drivers tend to use physical address
- for DMA and avoid using DMA APIs. Setting this config
- option permits the IOMMU driver to set a unity map for
- all the OS-visible memory. Hence the driver can continue
- to use physical addresses for DMA, at least until this
- option is removed in the 2.6.32 kernel.
-
-config INTEL_IOMMU_FLOPPY_WA
- def_bool y
- depends on INTEL_IOMMU && X86
- help
- Floppy disk drivers are known to bypass DMA API calls
- thereby failing to work when IOMMU is enabled. This
- workaround will setup a 1:1 mapping for the first
- 16MiB to make floppy (an ISA device) work.
-
-config INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
- bool "Enable Intel IOMMU scalable mode by default"
- depends on INTEL_IOMMU
- help
- Selecting this option will enable by default the scalable mode if
- hardware presents the capability. The scalable mode is defined in
- VT-d 3.0. The scalable mode capability could be checked by reading
- /sys/devices/virtual/iommu/dmar*/intel-iommu/ecap. If this option
- is not selected, scalable mode support could also be enabled by
- passing intel_iommu=sm_on to the kernel. If not sure, please use
- the default value.
+source "drivers/iommu/intel/Kconfig"
config IRQ_REMAP
bool "Support for Interrupt Remapping"
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index 342190196dfb..71dd2f382e78 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+obj-y += intel/
obj-$(CONFIG_IOMMU_API) += iommu.o
obj-$(CONFIG_IOMMU_API) += iommu-traces.o
obj-$(CONFIG_IOMMU_API) += iommu-sysfs.o
@@ -17,13 +18,8 @@ obj-$(CONFIG_AMD_IOMMU_V2) += amd/iommu_v2.o
obj-$(CONFIG_ARM_SMMU) += arm_smmu.o
arm_smmu-objs += arm-smmu.o arm-smmu-impl.o arm-smmu-qcom.o
obj-$(CONFIG_ARM_SMMU_V3) += arm-smmu-v3.o
-obj-$(CONFIG_DMAR_TABLE) += intel/dmar.o
-obj-$(CONFIG_INTEL_IOMMU) += intel/iommu.o intel/pasid.o
-obj-$(CONFIG_INTEL_IOMMU) += intel/trace.o
-obj-$(CONFIG_INTEL_IOMMU_DEBUGFS) += intel/debugfs.o
-obj-$(CONFIG_INTEL_IOMMU_SVM) += intel/svm.o
obj-$(CONFIG_IPMMU_VMSA) += ipmmu-vmsa.o
-obj-$(CONFIG_IRQ_REMAP) += intel/irq_remapping.o irq_remapping.o
+obj-$(CONFIG_IRQ_REMAP) += irq_remapping.o
obj-$(CONFIG_MTK_IOMMU) += mtk_iommu.o
obj-$(CONFIG_MTK_IOMMU_V1) += mtk_iommu_v1.o
obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
diff --git a/drivers/iommu/intel/Kconfig b/drivers/iommu/intel/Kconfig
new file mode 100644
index 000000000000..877beec9d987
--- /dev/null
+++ b/drivers/iommu/intel/Kconfig
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Intel IOMMU support
+config DMAR_TABLE
+ bool
+
+config INTEL_IOMMU
+ bool "Support for Intel IOMMU using DMA Remapping Devices"
+ depends on PCI_MSI && ACPI && (X86 || IA64)
+ select IOMMU_API
+ select IOMMU_IOVA
+ select NEED_DMA_MAP_STATE
+ select DMAR_TABLE
+ select SWIOTLB
+ select IOASID
+ help
+ DMA remapping (DMAR) devices support enables independent address
+ translations for Direct Memory Access (DMA) from devices.
+ These DMA remapping devices are reported via ACPI tables
+ and include PCI device scope covered by these DMA
+ remapping devices.
+
+config INTEL_IOMMU_DEBUGFS
+ bool "Export Intel IOMMU internals in Debugfs"
+ depends on INTEL_IOMMU && IOMMU_DEBUGFS
+ help
+ !!!WARNING!!!
+
+ DO NOT ENABLE THIS OPTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!!!
+
+ Expose Intel IOMMU internals in Debugfs.
+
+ This option is -NOT- intended for production environments, and should
+ only be enabled for debugging Intel IOMMU.
+
+config INTEL_IOMMU_SVM
+ bool "Support for Shared Virtual Memory with Intel IOMMU"
+ depends on INTEL_IOMMU && X86_64
+ select PCI_PASID
+ select PCI_PRI
+ select MMU_NOTIFIER
+ select IOASID
+ help
+ Shared Virtual Memory (SVM) provides a facility for devices
+ to access DMA resources through process address space by
+ means of a Process Address Space ID (PASID).
+
+config INTEL_IOMMU_DEFAULT_ON
+ def_bool y
+ prompt "Enable Intel DMA Remapping Devices by default"
+ depends on INTEL_IOMMU
+ help
+ Selecting this option will enable a DMAR device at boot time if
+ one is found. If this option is not selected, DMAR support can
+ be enabled by passing intel_iommu=on to the kernel.
+
+config INTEL_IOMMU_BROKEN_GFX_WA
+ bool "Workaround broken graphics drivers (going away soon)"
+ depends on INTEL_IOMMU && BROKEN && X86
+ help
+ Current Graphics drivers tend to use physical address
+ for DMA and avoid using DMA APIs. Setting this config
+ option permits the IOMMU driver to set a unity map for
+ all the OS-visible memory. Hence the driver can continue
+ to use physical addresses for DMA, at least until this
+ option is removed in the 2.6.32 kernel.
+
+config INTEL_IOMMU_FLOPPY_WA
+ def_bool y
+ depends on INTEL_IOMMU && X86
+ help
+ Floppy disk drivers are known to bypass DMA API calls
+ thereby failing to work when IOMMU is enabled. This
+ workaround will setup a 1:1 mapping for the first
+ 16MiB to make floppy (an ISA device) work.
+
+config INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
+ bool "Enable Intel IOMMU scalable mode by default"
+ depends on INTEL_IOMMU
+ help
+ Selecting this option will enable by default the scalable mode if
+ hardware presents the capability. The scalable mode is defined in
+ VT-d 3.0. The scalable mode capability could be checked by reading
+ /sys/devices/virtual/iommu/dmar*/intel-iommu/ecap. If this option
+ is not selected, scalable mode support could also be enabled by
+ passing intel_iommu=sm_on to the kernel. If not sure, please use
+ the default value.
diff --git a/drivers/iommu/intel/Makefile b/drivers/iommu/intel/Makefile
new file mode 100644
index 000000000000..fb8e1e8c8029
--- /dev/null
+++ b/drivers/iommu/intel/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_DMAR_TABLE) += dmar.o
+obj-$(CONFIG_INTEL_IOMMU) += iommu.o pasid.o
+obj-$(CONFIG_INTEL_IOMMU) += trace.o
+obj-$(CONFIG_INTEL_IOMMU_DEBUGFS) += debugfs.o
+obj-$(CONFIG_INTEL_IOMMU_SVM) += svm.o
+obj-$(CONFIG_IRQ_REMAP) += irq_remapping.o
--
2.27.0
Hi Jerry,
On 7/1/20 4:06 AM, Jerry Snitselaar wrote:
> Move Intel Kconfig and Makefile bits down into intel directory
> with the rest of the Intel specific files.
>
> Cc: Joerg Roedel <[email protected]>
> Cc: Lu Baolu <[email protected]>
Reviewed-by: Lu Baolu <[email protected]>
Best regards,
baolu
> Signed-off-by: Jerry Snitselaar <[email protected]>
> ---
> drivers/iommu/Kconfig | 86 +-----------------------------------
> drivers/iommu/Makefile | 8 +---
> drivers/iommu/intel/Kconfig | 86 ++++++++++++++++++++++++++++++++++++
> drivers/iommu/intel/Makefile | 7 +++
> 4 files changed, 96 insertions(+), 91 deletions(-)
> create mode 100644 drivers/iommu/intel/Kconfig
> create mode 100644 drivers/iommu/intel/Makefile
>
> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
> index 6dc49ed8377a..281cd6bd0fe0 100644
> --- a/drivers/iommu/Kconfig
> +++ b/drivers/iommu/Kconfig
> @@ -176,91 +176,7 @@ config AMD_IOMMU_DEBUGFS
> This option is -NOT- intended for production environments, and should
> not generally be enabled.
>
> -# Intel IOMMU support
> -config DMAR_TABLE
> - bool
> -
> -config INTEL_IOMMU
> - bool "Support for Intel IOMMU using DMA Remapping Devices"
> - depends on PCI_MSI && ACPI && (X86 || IA64)
> - select IOMMU_API
> - select IOMMU_IOVA
> - select NEED_DMA_MAP_STATE
> - select DMAR_TABLE
> - select SWIOTLB
> - select IOASID
> - help
> - DMA remapping (DMAR) devices support enables independent address
> - translations for Direct Memory Access (DMA) from devices.
> - These DMA remapping devices are reported via ACPI tables
> - and include PCI device scope covered by these DMA
> - remapping devices.
> -
> -config INTEL_IOMMU_DEBUGFS
> - bool "Export Intel IOMMU internals in Debugfs"
> - depends on INTEL_IOMMU && IOMMU_DEBUGFS
> - help
> - !!!WARNING!!!
> -
> - DO NOT ENABLE THIS OPTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!!!
> -
> - Expose Intel IOMMU internals in Debugfs.
> -
> - This option is -NOT- intended for production environments, and should
> - only be enabled for debugging Intel IOMMU.
> -
> -config INTEL_IOMMU_SVM
> - bool "Support for Shared Virtual Memory with Intel IOMMU"
> - depends on INTEL_IOMMU && X86_64
> - select PCI_PASID
> - select PCI_PRI
> - select MMU_NOTIFIER
> - select IOASID
> - help
> - Shared Virtual Memory (SVM) provides a facility for devices
> - to access DMA resources through process address space by
> - means of a Process Address Space ID (PASID).
> -
> -config INTEL_IOMMU_DEFAULT_ON
> - def_bool y
> - prompt "Enable Intel DMA Remapping Devices by default"
> - depends on INTEL_IOMMU
> - help
> - Selecting this option will enable a DMAR device at boot time if
> - one is found. If this option is not selected, DMAR support can
> - be enabled by passing intel_iommu=on to the kernel.
> -
> -config INTEL_IOMMU_BROKEN_GFX_WA
> - bool "Workaround broken graphics drivers (going away soon)"
> - depends on INTEL_IOMMU && BROKEN && X86
> - help
> - Current Graphics drivers tend to use physical address
> - for DMA and avoid using DMA APIs. Setting this config
> - option permits the IOMMU driver to set a unity map for
> - all the OS-visible memory. Hence the driver can continue
> - to use physical addresses for DMA, at least until this
> - option is removed in the 2.6.32 kernel.
> -
> -config INTEL_IOMMU_FLOPPY_WA
> - def_bool y
> - depends on INTEL_IOMMU && X86
> - help
> - Floppy disk drivers are known to bypass DMA API calls
> - thereby failing to work when IOMMU is enabled. This
> - workaround will setup a 1:1 mapping for the first
> - 16MiB to make floppy (an ISA device) work.
> -
> -config INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
> - bool "Enable Intel IOMMU scalable mode by default"
> - depends on INTEL_IOMMU
> - help
> - Selecting this option will enable by default the scalable mode if
> - hardware presents the capability. The scalable mode is defined in
> - VT-d 3.0. The scalable mode capability could be checked by reading
> - /sys/devices/virtual/iommu/dmar*/intel-iommu/ecap. If this option
> - is not selected, scalable mode support could also be enabled by
> - passing intel_iommu=sm_on to the kernel. If not sure, please use
> - the default value.
> +source "drivers/iommu/intel/Kconfig"
>
> config IRQ_REMAP
> bool "Support for Interrupt Remapping"
> diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
> index 342190196dfb..71dd2f382e78 100644
> --- a/drivers/iommu/Makefile
> +++ b/drivers/iommu/Makefile
> @@ -1,4 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
> +obj-y += intel/
> obj-$(CONFIG_IOMMU_API) += iommu.o
> obj-$(CONFIG_IOMMU_API) += iommu-traces.o
> obj-$(CONFIG_IOMMU_API) += iommu-sysfs.o
> @@ -17,13 +18,8 @@ obj-$(CONFIG_AMD_IOMMU_V2) += amd/iommu_v2.o
> obj-$(CONFIG_ARM_SMMU) += arm_smmu.o
> arm_smmu-objs += arm-smmu.o arm-smmu-impl.o arm-smmu-qcom.o
> obj-$(CONFIG_ARM_SMMU_V3) += arm-smmu-v3.o
> -obj-$(CONFIG_DMAR_TABLE) += intel/dmar.o
> -obj-$(CONFIG_INTEL_IOMMU) += intel/iommu.o intel/pasid.o
> -obj-$(CONFIG_INTEL_IOMMU) += intel/trace.o
> -obj-$(CONFIG_INTEL_IOMMU_DEBUGFS) += intel/debugfs.o
> -obj-$(CONFIG_INTEL_IOMMU_SVM) += intel/svm.o
> obj-$(CONFIG_IPMMU_VMSA) += ipmmu-vmsa.o
> -obj-$(CONFIG_IRQ_REMAP) += intel/irq_remapping.o irq_remapping.o
> +obj-$(CONFIG_IRQ_REMAP) += irq_remapping.o
> obj-$(CONFIG_MTK_IOMMU) += mtk_iommu.o
> obj-$(CONFIG_MTK_IOMMU_V1) += mtk_iommu_v1.o
> obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
> diff --git a/drivers/iommu/intel/Kconfig b/drivers/iommu/intel/Kconfig
> new file mode 100644
> index 000000000000..877beec9d987
> --- /dev/null
> +++ b/drivers/iommu/intel/Kconfig
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +# Intel IOMMU support
> +config DMAR_TABLE
> + bool
> +
> +config INTEL_IOMMU
> + bool "Support for Intel IOMMU using DMA Remapping Devices"
> + depends on PCI_MSI && ACPI && (X86 || IA64)
> + select IOMMU_API
> + select IOMMU_IOVA
> + select NEED_DMA_MAP_STATE
> + select DMAR_TABLE
> + select SWIOTLB
> + select IOASID
> + help
> + DMA remapping (DMAR) devices support enables independent address
> + translations for Direct Memory Access (DMA) from devices.
> + These DMA remapping devices are reported via ACPI tables
> + and include PCI device scope covered by these DMA
> + remapping devices.
> +
> +config INTEL_IOMMU_DEBUGFS
> + bool "Export Intel IOMMU internals in Debugfs"
> + depends on INTEL_IOMMU && IOMMU_DEBUGFS
> + help
> + !!!WARNING!!!
> +
> + DO NOT ENABLE THIS OPTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!!!
> +
> + Expose Intel IOMMU internals in Debugfs.
> +
> + This option is -NOT- intended for production environments, and should
> + only be enabled for debugging Intel IOMMU.
> +
> +config INTEL_IOMMU_SVM
> + bool "Support for Shared Virtual Memory with Intel IOMMU"
> + depends on INTEL_IOMMU && X86_64
> + select PCI_PASID
> + select PCI_PRI
> + select MMU_NOTIFIER
> + select IOASID
> + help
> + Shared Virtual Memory (SVM) provides a facility for devices
> + to access DMA resources through process address space by
> + means of a Process Address Space ID (PASID).
> +
> +config INTEL_IOMMU_DEFAULT_ON
> + def_bool y
> + prompt "Enable Intel DMA Remapping Devices by default"
> + depends on INTEL_IOMMU
> + help
> + Selecting this option will enable a DMAR device at boot time if
> + one is found. If this option is not selected, DMAR support can
> + be enabled by passing intel_iommu=on to the kernel.
> +
> +config INTEL_IOMMU_BROKEN_GFX_WA
> + bool "Workaround broken graphics drivers (going away soon)"
> + depends on INTEL_IOMMU && BROKEN && X86
> + help
> + Current Graphics drivers tend to use physical address
> + for DMA and avoid using DMA APIs. Setting this config
> + option permits the IOMMU driver to set a unity map for
> + all the OS-visible memory. Hence the driver can continue
> + to use physical addresses for DMA, at least until this
> + option is removed in the 2.6.32 kernel.
> +
> +config INTEL_IOMMU_FLOPPY_WA
> + def_bool y
> + depends on INTEL_IOMMU && X86
> + help
> + Floppy disk drivers are known to bypass DMA API calls
> + thereby failing to work when IOMMU is enabled. This
> + workaround will setup a 1:1 mapping for the first
> + 16MiB to make floppy (an ISA device) work.
> +
> +config INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
> + bool "Enable Intel IOMMU scalable mode by default"
> + depends on INTEL_IOMMU
> + help
> + Selecting this option will enable by default the scalable mode if
> + hardware presents the capability. The scalable mode is defined in
> + VT-d 3.0. The scalable mode capability could be checked by reading
> + /sys/devices/virtual/iommu/dmar*/intel-iommu/ecap. If this option
> + is not selected, scalable mode support could also be enabled by
> + passing intel_iommu=sm_on to the kernel. If not sure, please use
> + the default value.
> diff --git a/drivers/iommu/intel/Makefile b/drivers/iommu/intel/Makefile
> new file mode 100644
> index 000000000000..fb8e1e8c8029
> --- /dev/null
> +++ b/drivers/iommu/intel/Makefile
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_DMAR_TABLE) += dmar.o
> +obj-$(CONFIG_INTEL_IOMMU) += iommu.o pasid.o
> +obj-$(CONFIG_INTEL_IOMMU) += trace.o
> +obj-$(CONFIG_INTEL_IOMMU_DEBUGFS) += debugfs.o
> +obj-$(CONFIG_INTEL_IOMMU_SVM) += svm.o
> +obj-$(CONFIG_IRQ_REMAP) += irq_remapping.o
>
Jerry Snitselaar @ 2020-06-30 13:06 MST:
> This patchset imeplements the suggestion from Linus to move the
> Kconfig and Makefile bits for AMD and Intel into their respective
> directories.
>
> v2: Rebase against v5.8-rc3. Dropped ---help--- changes from Kconfig as that was
> dealt with in systemwide cleanup.
>
> Jerry Snitselaar (2):
> iommu/vt-d: Move Kconfig and Makefile bits down into intel directory
> iommu/amd: Move Kconfig and Makefile bits down into amd directory
>
>
> _______________________________________________
> iommu mailing list
> [email protected]
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
Hi Joerg,
Looks like I forgot to cc you on this cover letter for v2.
Does this work for you now?
Regards,
Jerry
On Mon, Jul 27, 2020 at 03:47:58PM -0700, Jerry Snitselaar wrote:
> Looks like I forgot to cc you on this cover letter for v2.
> Does this work for you now?
Got it, applied now, thanks Jerry.