The manufacturer of this board, ships it with various SPI NOR chips and
increments U-Boot bootloader version along the time. There is no way to
tell which is placed on the board since no revision bump takes place.
This creates two issues.
The first, cosmetic. Since the NOR chip may differ, there's message on
boot stating that kernel expected w25q32dw and found different one. To
correct this, remove optional device-specific compatible string. Being
here lets replace bogus "spi-flash" compatible string with proper one.
The second is linked to partitions layout, it changed after commit:
81e7251252 ("arm64: mvebu: config: move env to the end of the 4MB boot
device") in Marvells downstream U-Boot fork [1], shifting environment
location to the end of boot device. Since the new boards will have U-Boot
with this change, it'll lead to improper results writing or reading from
these partitions. We can't tell if users will update bootloader to recent
version provided on manufacturer website, so lets drop partitons layout.
1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell.git
Signed-off-by: Tomasz Maciej Nowak <[email protected]>
---
.../dts/marvell/armada-3720-espressobin.dts | 18 +-----------------
1 file changed, 1 insertion(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index 6be019e1888e..fbcf03f86c96 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -95,25 +95,9 @@
flash@0 {
reg = <0>;
- compatible = "winbond,w25q32dw", "jedec,spi-flash";
+ compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0 0x180000>;
- };
-
- partition@180000 {
- label = "ubootenv";
- reg = <0x180000 0x10000>;
- };
- };
};
};
--
2.21.0
Hi,
yes, I agree on this personally. I meant to correct this myself or at
least try to, but I didn't have time, as I was the one that found out
how they did their partition layout previously, this used to be good so
I asked Uwe Kleine-König if he could get this patch upstreamed, but as
it is I myself upgraded U-Boot and cannot make use of it anymore.
Thanks
Tomasz Maciej Nowak a écrit :
> The manufacturer of this board, ships it with various SPI NOR chips and
> increments U-Boot bootloader version along the time. There is no way to
> tell which is placed on the board since no revision bump takes place.
> This creates two issues.
>
> The first, cosmetic. Since the NOR chip may differ, there's message on
> boot stating that kernel expected w25q32dw and found different one. To
> correct this, remove optional device-specific compatible string. Being
> here lets replace bogus "spi-flash" compatible string with proper one.
>
> The second is linked to partitions layout, it changed after commit:
> 81e7251252 ("arm64: mvebu: config: move env to the end of the 4MB boot
> device") in Marvells downstream U-Boot fork [1], shifting environment
> location to the end of boot device. Since the new boards will have U-Boot
> with this change, it'll lead to improper results writing or reading from
> these partitions. We can't tell if users will update bootloader to recent
> version provided on manufacturer website, so lets drop partitons layout.
>
> 1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell.git
>
> Signed-off-by: Tomasz Maciej Nowak <[email protected]>
> ---
> .../dts/marvell/armada-3720-espressobin.dts | 18 +-----------------
> 1 file changed, 1 insertion(+), 17 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> index 6be019e1888e..fbcf03f86c96 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> @@ -95,25 +95,9 @@
>
> flash@0 {
> reg = <0>;
> - compatible = "winbond,w25q32dw", "jedec,spi-flash";
> + compatible = "jedec,spi-nor";
> spi-max-frequency = <104000000>;
> m25p,fast-read;
> -
> - partitions {
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - partition@0 {
> - label = "uboot";
> - reg = <0 0x180000>;
> - };
> -
> - partition@180000 {
> - label = "ubootenv";
> - reg = <0x180000 0x10000>;
> - };
> - };
> };
> };
>
>
Tomasz Maciej Nowak <[email protected]> writes:
> The manufacturer of this board, ships it with various SPI NOR chips and
> increments U-Boot bootloader version along the time. There is no way to
> tell which is placed on the board since no revision bump takes place.
> This creates two issues.
>
> The first, cosmetic. Since the NOR chip may differ, there's message on
> boot stating that kernel expected w25q32dw and found different one. To
> correct this, remove optional device-specific compatible string. Being
> here lets replace bogus "spi-flash" compatible string with proper one.
>
> The second is linked to partitions layout, it changed after commit:
> 81e7251252 ("arm64: mvebu: config: move env to the end of the 4MB boot
> device") in Marvells downstream U-Boot fork [1], shifting environment
> location to the end of boot device. Since the new boards will have U-Boot
> with this change, it'll lead to improper results writing or reading from
> these partitions. We can't tell if users will update bootloader to recent
> version provided on manufacturer website, so lets drop partitons layout.
>
> 1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell.git
>
> Signed-off-by: Tomasz Maciej Nowak <[email protected]>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> .../dts/marvell/armada-3720-espressobin.dts | 18 +-----------------
> 1 file changed, 1 insertion(+), 17 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> index 6be019e1888e..fbcf03f86c96 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
> @@ -95,25 +95,9 @@
>
> flash@0 {
> reg = <0>;
> - compatible = "winbond,w25q32dw", "jedec,spi-flash";
> + compatible = "jedec,spi-nor";
> spi-max-frequency = <104000000>;
> m25p,fast-read;
> -
> - partitions {
> - compatible = "fixed-partitions";
> - #address-cells = <1>;
> - #size-cells = <1>;
> -
> - partition@0 {
> - label = "uboot";
> - reg = <0 0x180000>;
> - };
> -
> - partition@180000 {
> - label = "ubootenv";
> - reg = <0x180000 0x10000>;
> - };
> - };
> };
> };
>
> --
> 2.21.0
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com