Add initial Senarytech codec support for SN6186. Note that this hda
patch relies on the configuration default registers to be set correctly
(normally by BIOS/firmware) in order for it to set up pin widgets
properly.
Signed-off-by: bo liu <[email protected]>
---
MAINTAINERS | 6 +
sound/hda/hdac_device.c | 1 +
sound/pci/hda/Kconfig | 11 ++
sound/pci/hda/Makefile | 2 +
sound/pci/hda/patch_senarytech.c | 263 +++++++++++++++++++++++++++++++
5 files changed, 283 insertions(+)
create mode 100644 sound/pci/hda/patch_senarytech.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a6a011792167..82ea8c8f74c1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -24949,6 +24949,12 @@ F: mm/zpool.c
F: mm/zswap.c
F: tools/testing/selftests/cgroup/test_zswap.c
+SENARYTECH AUDIO CODEC DRIVER
+M: bo liu <[email protected]>
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
+F: sound/pci/hda/patch_senarytech.c
+
THE REST
M: Linus Torvalds <[email protected]>
L: [email protected]
diff --git a/sound/hda/hdac_device.c b/sound/hda/hdac_device.c
index 068c16e52dff..3fbb9793dcfc 100644
--- a/sound/hda/hdac_device.c
+++ b/sound/hda/hdac_device.c
@@ -665,6 +665,7 @@ static const struct hda_vendor_id hda_vendor_ids[] = {
{ 0x19e5, "Huawei" },
{ 0x1aec, "Wolfson Microelectronics" },
{ 0x1af4, "QEMU" },
+ { 0x1fa8, "Senarytech" },
{ 0x434d, "C-Media" },
{ 0x8086, "Intel" },
{ 0x8384, "SigmaTel" },
diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig
index 0da625533afc..1252632f0ffa 100644
--- a/sound/pci/hda/Kconfig
+++ b/sound/pci/hda/Kconfig
@@ -292,6 +292,17 @@ config SND_HDA_CODEC_CONEXANT
comment "Set to Y if you want auto-loading the codec driver"
depends on SND_HDA=y && SND_HDA_CODEC_CONEXANT=m
+config SND_HDA_CODEC_SENARYTECH
+ tristate "Build Senarytech HD-audio codec support"
+ select SND_HDA_GENERIC
+ select SND_HDA_GENERIC_LEDS
+ help
+ Say Y or M here to include Senarytech HD-audio codec support in
+ snd-hda-intel driver, such as SN6186.
+
+comment "Set to Y if you want auto-loading the codec driver"
+ depends on SND_HDA=y && SND_HDA_CODEC_SENARYTECH=m
+
config SND_HDA_CODEC_CA0110
tristate "Build Creative CA0110-IBG codec support"
select SND_HDA_GENERIC
diff --git a/sound/pci/hda/Makefile b/sound/pci/hda/Makefile
index 058ca0a289e4..7ac2105c2e00 100644
--- a/sound/pci/hda/Makefile
+++ b/sound/pci/hda/Makefile
@@ -24,6 +24,7 @@ snd-hda-codec-cs8409-y := patch_cs8409.o patch_cs8409-tables.o
snd-hda-codec-ca0110-y := patch_ca0110.o
snd-hda-codec-ca0132-y := patch_ca0132.o
snd-hda-codec-conexant-y := patch_conexant.o
+snd-hda-codec-senarytech-objs :=patch_senarytech.o
snd-hda-codec-via-y := patch_via.o
snd-hda-codec-hdmi-y := patch_hdmi.o hda_eld.o
@@ -55,6 +56,7 @@ obj-$(CONFIG_SND_HDA_CODEC_CS8409) += snd-hda-codec-cs8409.o
obj-$(CONFIG_SND_HDA_CODEC_CA0110) += snd-hda-codec-ca0110.o
obj-$(CONFIG_SND_HDA_CODEC_CA0132) += snd-hda-codec-ca0132.o
obj-$(CONFIG_SND_HDA_CODEC_CONEXANT) += snd-hda-codec-conexant.o
+obj-$(CONFIG_SND_HDA_CODEC_SENARYTECH) += snd-hda-codec-senarytech.o
obj-$(CONFIG_SND_HDA_CODEC_VIA) += snd-hda-codec-via.o
obj-$(CONFIG_SND_HDA_CODEC_HDMI) += snd-hda-codec-hdmi.o
diff --git a/sound/pci/hda/patch_senarytech.c b/sound/pci/hda/patch_senarytech.c
new file mode 100644
index 000000000000..465846ff5eb3
--- /dev/null
+++ b/sound/pci/hda/patch_senarytech.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HD audio interface patch for Senary HDA audio codec
+ *
+ * Initially based on sound/pci/hda/patch_conexant.c
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+
+#include <sound/hda_codec.h>
+#include "hda_local.h"
+#include "hda_auto_parser.h"
+#include "hda_beep.h"
+#include "hda_jack.h"
+#include "hda_generic.h"
+
+struct senary_spec {
+ struct hda_gen_spec gen;
+
+ /* extra EAPD pins */
+ unsigned int num_eapds;
+ hda_nid_t eapds[4];
+ bool dynamic_eapd;
+ hda_nid_t mute_led_eapd;
+
+ unsigned int parse_flags; /* flag for snd_hda_parse_pin_defcfg() */
+
+ int mute_led_polarity;
+ unsigned int gpio_led;
+ unsigned int gpio_mute_led_mask;
+ unsigned int gpio_mic_led_mask;
+};
+
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+/* additional beep mixers; private_value will be overwritten */
+static const struct snd_kcontrol_new senary_beep_mixer[] = {
+ HDA_CODEC_VOLUME_MONO("Beep Playback Volume", 0, 1, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_BEEP_MONO("Beep Playback Switch", 0, 1, 0, HDA_OUTPUT),
+};
+
+static int set_beep_amp(struct senary_spec *spec, hda_nid_t nid,
+ int idx, int dir)
+{
+ struct snd_kcontrol_new *knew;
+ unsigned int beep_amp = HDA_COMPOSE_AMP_VAL(nid, 1, idx, dir);
+ int i;
+
+ spec->gen.beep_nid = nid;
+ for (i = 0; i < ARRAY_SIZE(senary_beep_mixer); i++) {
+ knew = snd_hda_gen_add_kctl(&spec->gen, NULL,
+ &senary_beep_mixer[i]);
+ if (!knew)
+ return -ENOMEM;
+ knew->private_value = beep_amp;
+ }
+ return 0;
+}
+
+static int senary_auto_parse_beep(struct hda_codec *codec)
+{
+ struct senary_spec *spec = codec->spec;
+ hda_nid_t nid;
+
+ for_each_hda_codec_node(nid, codec)
+ if ((get_wcaps_type(get_wcaps(codec, nid)) == AC_WID_BEEP) &&
+ (get_wcaps(codec, nid) & (AC_WCAP_OUT_AMP | AC_WCAP_AMP_OVRD)))
+ return set_beep_amp(spec, nid, 0, HDA_OUTPUT);
+ return 0;
+}
+#else
+#define senary_auto_parse_beep(codec) 0
+#endif
+
+/* parse EAPDs */
+static void senary_auto_parse_eapd(struct hda_codec *codec)
+{
+ struct senary_spec *spec = codec->spec;
+ hda_nid_t nid;
+
+ for_each_hda_codec_node(nid, codec) {
+ if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN)
+ continue;
+ if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD))
+ continue;
+ spec->eapds[spec->num_eapds++] = nid;
+ if (spec->num_eapds >= ARRAY_SIZE(spec->eapds))
+ break;
+ }
+
+ /* NOTE: below is a wild guess; if we have more than two EAPDs,
+ * it's a new chip, where EAPDs are supposed to be associated to
+ * pins, and we can control EAPD per pin.
+ * OTOH, if only one or two EAPDs are found, it's an old chip,
+ * thus it might control over all pins.
+ */
+ if (spec->num_eapds > 2)
+ spec->dynamic_eapd = 1;
+}
+
+static void senary_auto_turn_eapd(struct hda_codec *codec, int num_pins,
+ const hda_nid_t *pins, bool on)
+{
+ int i;
+
+ for (i = 0; i < num_pins; i++) {
+ if (snd_hda_query_pin_caps(codec, pins[i]) & AC_PINCAP_EAPD)
+ snd_hda_codec_write(codec, pins[i], 0,
+ AC_VERB_SET_EAPD_BTLENABLE,
+ on ? 0x02 : 0);
+ }
+}
+
+/* turn on/off EAPD according to Master switch */
+static void senary_auto_vmaster_hook(void *private_data, int enabled)
+{
+ struct hda_codec *codec = private_data;
+ struct senary_spec *spec = codec->spec;
+
+ senary_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, enabled);
+}
+
+static void senary_init_gpio_led(struct hda_codec *codec)
+{
+ struct senary_spec *spec = codec->spec;
+ unsigned int mask = spec->gpio_mute_led_mask | spec->gpio_mic_led_mask;
+
+ if (mask) {
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_MASK,
+ mask);
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DIRECTION,
+ mask);
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+ spec->gpio_led);
+ }
+}
+
+static int senary_auto_init(struct hda_codec *codec)
+{
+ struct senary_spec *spec = codec->spec;
+
+ snd_hda_gen_init(codec);
+ if (!spec->dynamic_eapd)
+ senary_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, true);
+
+ senary_init_gpio_led(codec);
+ snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_INIT);
+
+ return 0;
+}
+
+static void senary_auto_shutdown(struct hda_codec *codec)
+{
+ struct senary_spec *spec = codec->spec;
+
+ /* Turn the problematic codec into D3 to avoid spurious noises
+ * from the internal speaker during (and after) reboot
+ */
+ senary_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, false);
+}
+
+static void senary_auto_free(struct hda_codec *codec)
+{
+ senary_auto_shutdown(codec);
+ snd_hda_gen_free(codec);
+}
+
+#ifdef CONFIG_PM
+static int senary_auto_suspend(struct hda_codec *codec)
+{
+ senary_auto_shutdown(codec);
+ return 0;
+}
+#endif
+
+static const struct hda_codec_ops senary_auto_patch_ops = {
+ .build_controls = snd_hda_gen_build_controls,
+ .build_pcms = snd_hda_gen_build_pcms,
+ .init = senary_auto_init,
+ .free = senary_auto_free,
+ .unsol_event = snd_hda_jack_unsol_event,
+#ifdef CONFIG_PM
+ .suspend = senary_auto_suspend,
+ .check_power_status = snd_hda_gen_check_power_status,
+#endif
+};
+
+static int patch_senary_auto(struct hda_codec *codec)
+{
+ struct senary_spec *spec;
+ int err;
+
+ codec_info(codec, "%s: BIOS auto-probing.\n", codec->core.chip_name);
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (!spec)
+ return -ENOMEM;
+ snd_hda_gen_spec_init(&spec->gen);
+ codec->spec = spec;
+ codec->patch_ops = senary_auto_patch_ops;
+
+ senary_auto_parse_eapd(codec);
+ spec->gen.own_eapd_ctl = 1;
+
+ if (!spec->gen.vmaster_mute.hook && spec->dynamic_eapd)
+ spec->gen.vmaster_mute.hook = senary_auto_vmaster_hook;
+
+ snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
+
+ err = snd_hda_parse_pin_defcfg(codec, &spec->gen.autocfg, NULL,
+ spec->parse_flags);
+ if (err < 0)
+ goto error;
+
+ err = senary_auto_parse_beep(codec);
+ if (err < 0)
+ goto error;
+
+ err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg);
+ if (err < 0)
+ goto error;
+
+ /* Some laptops with Senary chips show stalls in S3 resume,
+ * which falls into the single-cmd mode.
+ * Better to make reset, then.
+ */
+ if (!codec->bus->core.sync_write) {
+ codec_info(codec,
+ "Enable sync_write for stable communication\n");
+ codec->bus->core.sync_write = 1;
+ codec->bus->allow_bus_reset = 1;
+ }
+
+ snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
+
+ return 0;
+
+ error:
+ senary_auto_free(codec);
+ return err;
+}
+
+/*
+ */
+
+static const struct hda_device_id snd_hda_id_senary[] = {
+ HDA_CODEC_ENTRY(0x1fa86186, "SN6186", patch_senary_auto),
+ {} /* terminator */
+};
+MODULE_DEVICE_TABLE(hdaudio, snd_hda_id_senary);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Senarytech HD-audio codec");
+
+static struct hda_codec_driver senary_driver = {
+ .id = snd_hda_id_senary,
+};
+
+module_hda_codec_driver(senary_driver);
--
2.34.1
On Thu, 06 Jun 2024 03:57:03 +0200,
bo liu wrote:
>
> Add initial Senarytech codec support for SN6186. Note that this hda
> patch relies on the configuration default registers to be set correctly
> (normally by BIOS/firmware) in order for it to set up pin widgets
> properly.
>
> Signed-off-by: bo liu <[email protected]>
The code looks almost fine, just a few nitpicking:
> --- a/sound/pci/hda/Makefile
> +++ b/sound/pci/hda/Makefile
> @@ -24,6 +24,7 @@ snd-hda-codec-cs8409-y := patch_cs8409.o patch_cs8409-tables.o
> snd-hda-codec-ca0110-y := patch_ca0110.o
> snd-hda-codec-ca0132-y := patch_ca0132.o
> snd-hda-codec-conexant-y := patch_conexant.o
> +snd-hda-codec-senarytech-objs :=patch_senarytech.o
Use *-y instead of *-objs. The other entries have been corrected
recently.
> +/* parse EAPDs */
> +static void senary_auto_parse_eapd(struct hda_codec *codec)
> +{
> + struct senary_spec *spec = codec->spec;
> + hda_nid_t nid;
> +
> + for_each_hda_codec_node(nid, codec) {
> + if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN)
> + continue;
> + if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD))
> + continue;
> + spec->eapds[spec->num_eapds++] = nid;
> + if (spec->num_eapds >= ARRAY_SIZE(spec->eapds))
> + break;
> + }
> +
> + /* NOTE: below is a wild guess; if we have more than two EAPDs,
> + * it's a new chip, where EAPDs are supposed to be associated to
> + * pins, and we can control EAPD per pin.
> + * OTOH, if only one or two EAPDs are found, it's an old chip,
> + * thus it might control over all pins.
> + */
> + if (spec->num_eapds > 2)
> + spec->dynamic_eapd = 1;
Do you still need to verify this? This is copied from Conexant
driver, and they needed this workaround due to different handling per
chip model. Unless needed, better to drop (or assuming always true)
this condition for simplicity.
> +#ifdef CONFIG_PM
> +static int senary_auto_suspend(struct hda_codec *codec)
> +{
> + senary_auto_shutdown(codec);
> + return 0;
> +}
> +#endif
The latest code dropped the dependency on CONFIG_PM. Remove ifdef.
> +static const struct hda_codec_ops senary_auto_patch_ops = {
> + .build_controls = snd_hda_gen_build_controls,
> + .build_pcms = snd_hda_gen_build_pcms,
> + .init = senary_auto_init,
> + .free = senary_auto_free,
> + .unsol_event = snd_hda_jack_unsol_event,
> +#ifdef CONFIG_PM
> + .suspend = senary_auto_suspend,
> + .check_power_status = snd_hda_gen_check_power_status,
> +#endif
Ditto.
thanks,
Takashi