This adds an override for a series of notebooks using a common config
taken from HP's proprietary Windows driver.
This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31)
together with another Realtek quirk and the calibration files from the
proprietary driver.
Signed-off-by: Lorenz Brun <[email protected]>
---
Changes in v2:
- Use newly-introduced config table instead of function
- Change boost cap value from 10uF to 24uF after cross-referencing my
sources with the preexisting 103C89C6 entry.
Just noticed that yesterday I sent out another copy of v1 instead of v2,
sorry about that.
sound/pci/hda/cs35l41_hda_property.c | 46 ++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index c9eb70290973..c65b106ff1ab 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -42,6 +42,30 @@ static const struct cs35l41_config cs35l41_config_table[] = {
* in the ACPI. The Reset GPIO is also valid, so we can use the Reset defined in _DSD.
*/
{ "103C89C6", SPI, 2, INTERNAL, { CS35L41_RIGHT, CS35L41_LEFT, 0, 0 }, -1, -1, -1, 1000, 4500, 24 },
+
+ { "103C8A28", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A29", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A2A", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A2B", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A2C", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A2D", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A2E", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A30", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8A31", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BB3", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BB4", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BDF", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE0", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE1", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE2", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE9", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BDD", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BDE", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE3", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE5", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8BE6", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+ { "103C8B3A", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+
{ "104312AF", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
{ "10431433", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
{ "10431463", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
@@ -374,6 +398,28 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
{ "CSC3551", "10431F12", generic_dsd_config },
{ "CSC3551", "10431F1F", generic_dsd_config },
{ "CSC3551", "10431F62", generic_dsd_config },
+ { "CSC3551", "103C8A28", generic_dsd_config },
+ { "CSC3551", "103C8A29", generic_dsd_config },
+ { "CSC3551", "103C8A2A", generic_dsd_config },
+ { "CSC3551", "103C8A2B", generic_dsd_config },
+ { "CSC3551", "103C8A2C", generic_dsd_config },
+ { "CSC3551", "103C8A2D", generic_dsd_config },
+ { "CSC3551", "103C8A2E", generic_dsd_config },
+ { "CSC3551", "103C8A30", generic_dsd_config },
+ { "CSC3551", "103C8A31", generic_dsd_config },
+ { "CSC3551", "103C8BB3", generic_dsd_config },
+ { "CSC3551", "103C8BB4", generic_dsd_config },
+ { "CSC3551", "103C8BDF", generic_dsd_config },
+ { "CSC3551", "103C8BE0", generic_dsd_config },
+ { "CSC3551", "103C8BE1", generic_dsd_config },
+ { "CSC3551", "103C8BE2", generic_dsd_config },
+ { "CSC3551", "103C8BE9", generic_dsd_config },
+ { "CSC3551", "103C8BDD", generic_dsd_config },
+ { "CSC3551", "103C8BDE", generic_dsd_config },
+ { "CSC3551", "103C8BE3", generic_dsd_config },
+ { "CSC3551", "103C8BE5", generic_dsd_config },
+ { "CSC3551", "103C8BE6", generic_dsd_config },
+ { "CSC3551", "103C8B3A", generic_dsd_config },
{}
};
--
2.42.0
On Sat, 23 Dec 2023 16:09:11 +0100,
Lorenz Brun wrote:
>
> This adds an override for a series of notebooks using a common config
> taken from HP's proprietary Windows driver.
>
> This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31)
> together with another Realtek quirk and the calibration files from the
> proprietary driver.
>
> Signed-off-by: Lorenz Brun <[email protected]>
> ---
> Changes in v2:
> - Use newly-introduced config table instead of function
> - Change boost cap value from 10uF to 24uF after cross-referencing my
> sources with the preexisting 103C89C6 entry.
This doesn't apply cleanly any longer after the merge of the latest
series from Stefan, unfortunately. Could you rebase on either
for-next or topic/cs35l41 branch of sound.git tree and resubmit?
Also, the prop_model_table[] is a sorted list. Please add entries at
the right positions.
thanks,
Takashi