*** please Cc to [email protected] when replying ***
Hi, I sent a similar report a couple of weeks ago but got no
response. Can Someone Who Knows (TM) please have a look at it and tell
me what's wrong with this Olivetti Netstrada? It works with 2.2.18 but
all the 2.4.x kernels didn't work so far. I tried also changing
compile options, eliminating all that is not strictly necessary to
boot, but got the same error.
here is it:
Linux version 2.4.2 (root@paperino) (gcc version 2.95.3 20010219 (prerelease)) #1 Fri Mar 16 15:23:30 CET 2001
BIOS-provided physical RAM map:
BIOS-e801: 000000000009f000 @ 0000000000000000 (usable)
BIOS-e801: 0000000041505000 @ 0000000000100000 (usable)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
On node 0 totalpages: 229376
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=test ro root=802 BOOT_FILE=/vmlinuz.test console=ttyS0,9600
Initializing CPU#0
Detected 200.012 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 398.95 BogoMIPS
Memory: 899624k/917504k available (1320k kernel code, 17492k reserved, 450k data, 84k init, 0k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Before vendor init, caps: 0000fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 8K, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0000fbff 00000000 00000000 00000000
CPU: After generic, caps: 0000fbff 00000000 00000000 00000000
CPU: Common caps: 0000fbff 00000000 00000000 00000000
CPU: Intel Pentium Pro stepping 09
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
general protection fault: 0000
CPU: 0
EIP: 0010:[<c013d013>]
EFLAGS: 00010246
eax: 00000000 ebx: ffffffff ecx: 00000072 edx: c013cff4
esi: f7fbf000 edi: ffffffff ebp: f7fbf000 esp: c1efff2c
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c1eff000)
Stack: 00000000 c1ef70c0 c0123d59 ffffffff c1ef70c0 00000001 c1ef70c0 00000246
00000007 c02b5538 00000001 c0123e3f c1ef70c0 00000007 c1ef6200 c1ef6200
00000000 c013da82 c1ef70c0 00000007 c1ef6200 c01e5543 c1ef6200 00000001
Call Trace: [<c0123d59>] [<c0123e3f>] [<c013da82>] [<c01e5543>] [<c012feac>] [<c0130432>] [<c0107007>]
[<c0107424>]
Code: f3 ab 8d 93 90 00 00 00 c7 83 90 00 00 00 00 00 00 00 8d 83
Kernel panic: Attempted to kill init!
CPU: 0
EIP: 0010:[<c013d013>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: 00000000 ebx: ffffffff ecx: 00000072 edx: c013cff4
esi: f7fbf000 edi: ffffffff ebp: f7fbf000 esp: c1efff2c
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 1, stackpage=c1eff000)
Stack: 00000000 c1ef70c0 c0123d59 ffffffff c1ef70c0 00000001 c1ef70c0 00000246
00000007 c02b5538 00000001 c0123e3f c1ef70c0 00000007 c1ef6200 c1ef6200
00000000 c013da82 c1ef70c0 00000007 c1ef6200 c01e5543 c1ef6200 00000001
Call Trace: [<c0123d59>] [<c0123e3f>] [<c013da82>] [<c01e5543>] [<c012feac>] [<c0130432>] [<c0107007>]
[<c0107424>]
Code: f3 ab 8d 93 90 00 00 00 c7 83 90 00 00 00 00 00 00 00 8d 83
>>EIP; c013d013 <init_once+1f/d0> <=====
Trace; c0123d59 <kmem_cache_grow+169/208>
Trace; c0123e3f <kmem_cache_alloc+47/54>
Trace; c013da82 <get_empty_inode+e/84>
Trace; c01e5543 <sockfs_read_super+b/a4>
Trace; c012feac <read_super+100/170>
Trace; c0130432 <kern_mount+2e/80>
Trace; c0107007 <init+7/110>
Trace; c0107424 <kernel_thread+28/38>
Code; c013d013 <init_once+1f/d0>
00000000 <_EIP>:
Code; c013d013 <init_once+1f/d0> <=====
0: f3 ab repz stos %eax,%es:(%edi) <=====
Code; c013d015 <init_once+21/d0>
2: 8d 93 90 00 00 00 lea 0x90(%ebx),%edx
Code; c013d01b <init_once+27/d0>
8: c7 83 90 00 00 00 00 movl $0x0,0x90(%ebx)
Code; c013d022 <init_once+2e/d0>
f: 00 00 00
Code; c013d025 <init_once+31/d0>
12: 8d 83 00 00 00 00 lea 0x0(%ebx),%eax
Kernel panic: Attempted to kill init!
970 warnings issued. Results may not be reliable.
(this is because I ran it on a different machine, the system.map was
the one from the crashing kernel, though)
Also, I just realized that this stupid bios tells the kernel to have a
lot of memory, while it only has 128 M (see the line just at the
beginning of the boot output).
here's what's inside this machine:
root@mirror:~ # lspci -v
00:03.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 11)
Flags: bus master, medium devsel, latency 96, IRQ 11
I/O ports at ec00
Memory at df000000 (32-bit, non-prefetchable)
Expansion ROM at de000000 [disabled]
00:05.0 Non-VGA unclassified device: Intel Corporation 82375EB (rev 15)
Flags: bus master, medium devsel, latency 248
00:14.0 RAM memory: Intel Corporation 450KX/GX [Orion] - 82453KX/GX Memory controller (rev 05)
Flags: fast devsel
00:19.0 Host bridge: Intel Corporation 450KX/GX [Orion] - 82454KX/GX PCI bridge (rev 06)
Flags: bus master, medium devsel, latency 96
00:1a.0 Host bridge: Intel Corporation 450KX/GX [Orion] - 82454KX/GX PCI bridge (rev 06)
Flags: bus master, medium devsel, latency 96
01:00.0 SCSI storage controller: Adaptec AIC-7880U (rev 01)
Subsystem: Adaptec: Unknown device 7880
Flags: bus master, medium devsel, latency 96, IRQ 15
I/O ports at d400
Memory at dd000000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 1
I'm willing to do some tests, time permitting.
Pf
--
-------------------------------------------------------------------------------
Pierfrancesco Caci | System Administrator @ seabone.net
[email protected] | Telecom Italia S.p.A. - International Operations
Linux paperino 2.4.2 #2 Thu Mar 8 15:21:54 CET 2001 i686 unknown