Simplify lan9303_indirect_phy_wait_for_completion()
and lan9303_switch_wait_for_completion() by using a new function
lan9303_read_wait()
Changes v1 -> v2:
- param 'mask' type u32
- removed param 'value' (will probably never be used)
- add newline before return
Signed-off-by: Egil Hjelmeland <[email protected]>
---
drivers/net/dsa/lan9303-core.c | 59 +++++++++++++++++++-----------------------
1 file changed, 27 insertions(+), 32 deletions(-)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index c1b004fa64d9..f412aad58253 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -249,6 +249,29 @@ static int lan9303_read(struct regmap *regmap, unsigned int offset, u32 *reg)
return -EIO;
}
+/* Wait a while until mask & reg == value. Otherwise return timeout. */
+static int lan9303_read_wait(struct lan9303 *chip, int offset, u32 mask)
+{
+ int i;
+
+ for (i = 0; i < 25; i++) {
+ u32 reg;
+ int ret;
+
+ ret = lan9303_read(chip->regmap, offset, ®);
+ if (ret) {
+ dev_err(chip->dev, "%s failed to read offset %d: %d\n",
+ __func__, offset, ret);
+ return ret;
+ }
+ if (!(reg & mask))
+ return 0;
+ usleep_range(1000, 2000);
+ }
+
+ return -ETIMEDOUT;
+}
+
static int lan9303_virt_phy_reg_read(struct lan9303 *chip, int regnum)
{
int ret;
@@ -274,22 +297,8 @@ static int lan9303_virt_phy_reg_write(struct lan9303 *chip, int regnum, u16 val)
static int lan9303_indirect_phy_wait_for_completion(struct lan9303 *chip)
{
- int ret, i;
- u32 reg;
-
- for (i = 0; i < 25; i++) {
- ret = lan9303_read(chip->regmap, LAN9303_PMI_ACCESS, ®);
- if (ret) {
- dev_err(chip->dev,
- "Failed to read pmi access status: %d\n", ret);
- return ret;
- }
- if (!(reg & LAN9303_PMI_ACCESS_MII_BUSY))
- return 0;
- usleep_range(1000, 2000);
- }
-
- return -EIO;
+ return lan9303_read_wait(chip, LAN9303_PMI_ACCESS,
+ LAN9303_PMI_ACCESS_MII_BUSY);
}
static int lan9303_indirect_phy_read(struct lan9303 *chip, int addr, int regnum)
@@ -366,22 +375,8 @@ EXPORT_SYMBOL_GPL(lan9303_indirect_phy_ops);
static int lan9303_switch_wait_for_completion(struct lan9303 *chip)
{
- int ret, i;
- u32 reg;
-
- for (i = 0; i < 25; i++) {
- ret = lan9303_read(chip->regmap, LAN9303_SWITCH_CSR_CMD, ®);
- if (ret) {
- dev_err(chip->dev,
- "Failed to read csr command status: %d\n", ret);
- return ret;
- }
- if (!(reg & LAN9303_SWITCH_CSR_CMD_BUSY))
- return 0;
- usleep_range(1000, 2000);
- }
-
- return -EIO;
+ return lan9303_read_wait(chip, LAN9303_SWITCH_CSR_CMD,
+ LAN9303_SWITCH_CSR_CMD_BUSY);
}
static int lan9303_write_switch_reg(struct lan9303 *chip, u16 regnum, u32 val)
--
2.14.1
Egil Hjelmeland <[email protected]> writes:
> Simplify lan9303_indirect_phy_wait_for_completion()
> and lan9303_switch_wait_for_completion() by using a new function
> lan9303_read_wait()
>
> Changes v1 -> v2:
> - param 'mask' type u32
> - removed param 'value' (will probably never be used)
> - add newline before return
>
> Signed-off-by: Egil Hjelmeland <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
From: Egil Hjelmeland <[email protected]>
Date: Wed, 13 Dec 2017 15:42:50 +0100
> Simplify lan9303_indirect_phy_wait_for_completion()
> and lan9303_switch_wait_for_completion() by using a new function
> lan9303_read_wait()
>
> Changes v1 -> v2:
> - param 'mask' type u32
> - removed param 'value' (will probably never be used)
> - add newline before return
>
> Signed-off-by: Egil Hjelmeland <[email protected]>
Applied, thank you.