On Wed, 16 Aug 2023, Pablo Ceballos <[email protected]> wrote:
> This is to eliminate all cases of "*ERROR* LSPCON mode hasn't settled",
> followed by link training errors. Intel engineers recommended increasing
> this timeout and that does resolve the issue.
>
> On some CometLake-based device designs the Parade PS175 takes more than
> 400ms to settle in PCON mode. 100 reboot trials on one device resulted
> in a median settle time of 440ms and a maximum of 444ms. Even after
> increasing the timeout to 500ms, 2% of devices still had this error. So
> this increases the timeout to 800ms.
>
> Signed-off-by: Pablo Ceballos <[email protected]>
Please file the issue at [1] as requested before, and reference it in
the commit message.
[1] https://gitlab.freedesktop.org/drm/intel/-/issues/new
> ---
>
> V2: Added more details in the commit message
> V3: Only apply the increased timeout if the vendor is Parade
>
> drivers/gpu/drm/i915/display/intel_lspcon.c | 21 ++++++++++++++++++++-
> 1 file changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
> index bb3b5355a0d9..b07eab84cc63 100644
> --- a/drivers/gpu/drm/i915/display/intel_lspcon.c
> +++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
> @@ -153,6 +153,24 @@ static enum drm_lspcon_mode lspcon_get_current_mode(struct intel_lspcon *lspcon)
> return current_mode;
> }
>
> +static u32 lspcon_get_mode_settle_timeout(struct intel_lspcon *lspcon)
> +{
> + u32 timeout_ms = 400;
Please use plain int for plain numbers. There's nothing u32 about this.
> +
> + /*
> + * On some CometLake-based device designs the Parade PS175 takes more
> + * than 400ms to settle in PCON mode. 100 reboot trials on one device
> + * resulted in a median settle time of 440ms and a maximum of 444ms.
> + * Even after increasing the timeout to 500ms, 2% of devices still had
> + * this error. So this sets the timeout to 800ms.
> + */
> + if (lspcon->vendor == LSPCON_VENDOR_PARADE)
> + timeout_ms = 800;
> +
> + return timeout_ms;
All of the above is just
return lspcon->vendor == LSPCON_VENDOR_PARADE ? 800 : 400;
BR,
Jani.
> +}
> +
> +
> static enum drm_lspcon_mode lspcon_wait_mode(struct intel_lspcon *lspcon,
> enum drm_lspcon_mode mode)
> {
> @@ -167,7 +185,8 @@ static enum drm_lspcon_mode lspcon_wait_mode(struct intel_lspcon *lspcon,
> drm_dbg_kms(&i915->drm, "Waiting for LSPCON mode %s to settle\n",
> lspcon_mode_name(mode));
>
> - wait_for((current_mode = lspcon_get_current_mode(lspcon)) == mode, 400);
> + wait_for((current_mode = lspcon_get_current_mode(lspcon)) == mode,
> + lspcon_get_mode_settle_timeout(lspcon));
> if (current_mode != mode)
> drm_err(&i915->drm, "LSPCON mode hasn't settled\n");
--
Jani Nikula, Intel