2011-03-12 15:33:32

by Robin Becker

Subject: [PATCH] arm: mach-kirkwood: add led in sheevaplug-setup.c

From: Robin Becker <[email protected]>

This patch adds a second, red, led for the standard sheevaplug.
The sheeva_esata mpp config is left unchanged.

Tested on a standard sheevaplug

Signed-off-by: Robin Becker <[email protected]>
---
arch/arm/mach-kirkwood/sheevaplug-setup.c | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index d2eec35..247aa92 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -58,6 +58,12 @@ static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {

static struct gpio_led sheevaplug_led_pins[] = {
{
+ .name = "plug:red:misc",
+ .default_trigger = "none",
+ .gpio = 46,
+ .active_low = 1,
+ },
+ {
.name = "plug:green:health",
.default_trigger = "default-on",
.gpio = 49,
@@ -80,6 +86,7 @@ static struct platform_device sheevaplug_leds = {

static unsigned int sheevaplug_mpp_config[] __initdata = {
MPP29_GPIO, /* USB Power Enable */
+ MPP46_GPIO, /* LED Red */
MPP49_GPIO, /* LED */
0
};
--
1.7.4.1

2011-03-12 21:46:15

by Peter Korsgaard

Subject: Re: [PATCH] arm: mach-kirkwood: add led in sheevaplug-setup.c

>>>>> "Robin" == Robin Becker <[email protected]> writes:

Robin> From: Robin Becker <[email protected]>
Robin> This patch adds a second, red, led for the standard sheevaplug.
Robin> The sheeva_esata mpp config is left unchanged.

Robin> Tested on a standard sheevaplug

Robin> Signed-off-by: Robin Becker <[email protected]>

Acked-by: Peter Korsgaard <[email protected]>

I had a look at this 2nd LED just the other week and was going to send a
patch to add it.

--
Bye, Peter Korsgaard