Hi all,
I've been running into a few troubles on our HP XW6200 workstations.
SYMPTOM 1:
If I'm booting normally I'm getting theses errors in dmesg (using either
a 2.6.16.x or 2.6.17.11):
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2048276k swap on /dev/sda3. Priority:-1 extents:1
across:2048276k
EXT3 FS on sda2, internal journal
ACPI Error (evgpe-0688): No handler or method for GPE[ 0], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[ 1], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[ 2], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[ 5], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[ 6], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[ 7], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[ 9], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[ A], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[ F], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[10], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[11], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[12], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[13], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[14], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[15], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[16], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[17], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[19], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[1A], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[1B], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[1C], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[1D], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[1E], disabling
event [20060127]
ACPI Error (evgpe-0688): No handler or method for GPE[1F], disabling
event [20060127]
mice: PS/2 mouse device common for all mice
usbcore: registered new driver usbmouse
Also, if I add the acpi=off it removes the ACPI Error msgs but then I
just
can see two cpu instead of the usual 4 (2 + hyper-threading)... I really
don't know if I'm actually seing two physical CPU or just one with it's
hyperthreading?
Here is one cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 4
model name : Intel(R) Xeon(TM) CPU 3.20GHz
stepping : 1
cpu MHz : 3200.728
cache size : 1024 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm
constant_tsc pni monitor ds_cpl cid cx16 xtpr
bogomips : 6409.57
Top with acpi=off
top - 17:57:51 up 1:28, 3 users, load average: 2.56, 2.61, 2.41
Tasks: 120 total, 4 running, 116 sleeping, 0 stopped, 0 zombie
Cpu0 : 56.3% us, 5.5% sy, 0.0% ni, 31.4% id, 1.5% wa, 0.2% hi,5.1%
si
Cpu1 : 57.3% us, 5.7% sy, 0.0% ni, 33.1% id, 1.7% wa, 0.2% hi,2.0%
si
Top without acpi=off
top - 17:58:42 up 8 min, 1 user, load average: 0.00, 0.05, 0.03
Tasks: 84 total, 1 running, 83 sleeping, 0 stopped, 0 zombie
Cpu0 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,0.0%
si
Cpu1 : 0.0% us, 0.0% sy, 0.0% ni, 100.0% id, 0.0% wa, 0.0% hi,0.0%
si
Cpu2 : 0.0% us, 0.0% sy, 0.0% ni, 99.0% id, 0.0% wa, 0.0% hi,1.0%
si
Cpu3 : 0.0% us, 0.0% sy, 0.0% ni, 94.4% id, 0.0% wa, 0.0% hi,5.6%
si
Note that noapic option did not changed any behaviour about this.
========================================================================
===
SYMPTOM 2:
Also, theses workstations are either running with 4gig or 5gig of ram
(depending of the workstation..). If the kernel is not set-up into
"bigmem" (64gig) then I can only see about 3gig of ram?
Here is the meminfo WITHOUT 64gig highmem enabled:
MemTotal: 3370236 kB
MemFree: 3136524 kB
Buffers: 8656 kB
Cached: 119728 kB
SwapCached: 0 kB
Active: 149880 kB
Inactive: 45432 kB
HighTotal: 2228180 kB
HighFree: 2031484 kB
LowTotal: 1142056 kB
LowFree: 1105040 kB
SwapTotal: 2048276 kB
SwapFree: 2048276 kB
Dirty: 4 kB
Writeback: 0 kB
Mapped: 85092 kB
Slab: 17796 kB
CommitLimit: 3733392 kB
Committed_AS: 157468 kB
PageTables: 620 kB
VmallocTotal: 114680 kB
VmallocUsed: 43564 kB
VmallocChunk: 66036 kB
And here is the same system WITH 64gig highmem enabled:
MemTotal: 5189828 kB
MemFree: 3583332 kB
Buffers: 152364 kB
Cached: 1201992 kB
SwapCached: 0 kB
Active: 1098516 kB
Inactive: 368720 kB
HighTotal: 4325332 kB
HighFree: 3002304 kB
LowTotal: 864496 kB
LowFree: 581028 kB
SwapTotal: 2048276 kB
SwapFree: 2048276 kB
Dirty: 7672 kB
Writeback: 0 kB
Mapped: 166440 kB
Slab: 120676 kB
CommitLimit: 4643188 kB
Committed_AS: 299400 kB
PageTables: 2408 kB
VmallocTotal: 118776 kB
VmallocUsed: 43528 kB
VmallocChunk: 70132 kB
Note that noapic or acpi=off do not affect this.
Has anybody ran into theses type of errors?
Thnx!
Vincent Fortier