Hi,
The patchset is based on David Miller's "net-next" repo.
The patches add support for the Broadcom Omega SoC's internal ethernet
switch and the internal gphy.
The internal ethernet switch in the Omega is a b53 srab based switch.
The support for the switch is added to the b53 driver in the dsa
framework.
The gphy support is added to the bcm7xxx driver.
Thanks
Arun
Arun Parameswaran (3):
dt-bindings: net: dsa: Add compatibility strings for Broadcom Omega
net: dsa: b53: Add support for Broadcom Omega SoC internal switch
net: phy: Add support for Broadcom Omega internal Combo GPHY
Documentation/devicetree/bindings/net/dsa/b53.txt | 8 ++++++++
drivers/net/dsa/b53/b53_srab.c | 1 +
drivers/net/phy/bcm7xxx.c | 2 ++
include/linux/brcmphy.h | 1 +
4 files changed, 12 insertions(+)
--
1.9.1
Add support for the Broadcom Omega SoC internal ethernet switch
to the b53 srab driver in the DSA framework.
Signed-off-by: Arun Parameswaran <[email protected]>
---
drivers/net/dsa/b53/b53_srab.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
index 8247481..91de2ba 100644
--- a/drivers/net/dsa/b53/b53_srab.c
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -374,6 +374,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
{ .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
{ .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID },
{ .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
+ { .compatible = "brcm,omega-srab", .data = (void *)BCM583XX_DEVICE_ID },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, b53_srab_of_match);
--
1.9.1
On 08/07/2018 10:02 AM, Arun Parameswaran wrote:
> Add support for the Broadcom Omega SoC internal Combo Ethernet
> GPHY to the bcm7xxx phy driver.
>
> Signed-off-by: Arun Parameswaran <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
--
Florian
On 08/07/2018 10:02 AM, Arun Parameswaran wrote:
> Add support for the Broadcom Omega SoC internal ethernet switch
> to the b53 srab driver in the DSA framework.
>
> Signed-off-by: Arun Parameswaran <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
--
Florian
On Tue, Aug 07, 2018 at 10:02:41AM -0700, Arun Parameswaran wrote:
> Hi,
>
> The patchset is based on David Miller's "net-next" repo.
>
> The patches add support for the Broadcom Omega SoC's internal ethernet
> switch and the internal gphy.
>
> The internal ethernet switch in the Omega is a b53 srab based switch.
> The support for the switch is added to the b53 driver in the dsa
> framework.
>
> The gphy support is added to the bcm7xxx driver.
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
Add compatibility strings for the internal switch in the Broadcom
Omega SoC family (BCM5831X/BCM1140X) to B53.
Signed-off-by: Arun Parameswaran <[email protected]>
---
Documentation/devicetree/bindings/net/dsa/b53.txt | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
index 47a6a7f..1811e19 100644
--- a/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ b/Documentation/devicetree/bindings/net/dsa/b53.txt
@@ -24,6 +24,14 @@ Required properties:
"brcm,bcm53018-srab"
"brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
+ For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
+ "brcm,bcm11404-srab"
+ "brcm,bcm11407-srab"
+ "brcm,bcm11409-srab"
+ "brcm,bcm58310-srab"
+ "brcm,bcm58311-srab"
+ "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
+
For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
"brcm,bcm58522-srab"
"brcm,bcm58523-srab"
--
1.9.1
Add support for the Broadcom Omega SoC internal Combo Ethernet
GPHY to the bcm7xxx phy driver.
Signed-off-by: Arun Parameswaran <[email protected]>
---
drivers/net/phy/bcm7xxx.c | 2 ++
include/linux/brcmphy.h | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 01d2ff2f..b2b6307 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -229,6 +229,7 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
phy_read(phydev, MII_BMSR);
switch (rev) {
+ case 0xa0:
case 0xb0:
ret = bcm7xxx_28nm_b0_afe_config_init(phydev);
break;
@@ -659,6 +660,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
+ BCM7XXX_28NM_GPHY(PHY_ID_BCM_OMEGA, "Broadcom Omega Combo GPHY"),
BCM7XXX_40NM_EPHY(PHY_ID_BCM7346, "Broadcom BCM7346"),
BCM7XXX_40NM_EPHY(PHY_ID_BCM7362, "Broadcom BCM7362"),
BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"),
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index daa9234..949e9af 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -45,6 +45,7 @@
#define PHY_ID_BCM7445 0x600d8510
#define PHY_ID_BCM_CYGNUS 0xae025200
+#define PHY_ID_BCM_OMEGA 0xae025100
#define PHY_BCM_OUI_MASK 0xfffffc00
#define PHY_BCM_OUI_1 0x00206000
--
1.9.1
On 08/07/2018 10:02 AM, Arun Parameswaran wrote:
> Add compatibility strings for the internal switch in the Broadcom
> Omega SoC family (BCM5831X/BCM1140X) to B53.
>
> Signed-off-by: Arun Parameswaran <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
--
Florian
From: Andrew Lunn <[email protected]>
Date: Tue, 7 Aug 2018 20:08:27 +0200
> On Tue, Aug 07, 2018 at 10:02:41AM -0700, Arun Parameswaran wrote:
>> Hi,
>>
>> The patchset is based on David Miller's "net-next" repo.
>>
>> The patches add support for the Broadcom Omega SoC's internal ethernet
>> switch and the internal gphy.
>>
>> The internal ethernet switch in the Omega is a b53 srab based switch.
>> The support for the switch is added to the b53 driver in the dsa
>> framework.
>>
>> The gphy support is added to the bcm7xxx driver.
>
> Reviewed-by: Andrew Lunn <[email protected]>
Series applied.
On Tue, 7 Aug 2018 10:02:42 -0700, Arun Parameswaran wrote:
> Add compatibility strings for the internal switch in the Broadcom
> Omega SoC family (BCM5831X/BCM1140X) to B53.
>
> Signed-off-by: Arun Parameswaran <[email protected]>
> ---
> Documentation/devicetree/bindings/net/dsa/b53.txt | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
Reviewed-by: Rob Herring <[email protected]>