2022-04-12 08:38:15

by Philippe Schenker

[permalink] [raw]
Subject: Re: [PATCH] iio: stmpe-adc: Fix wait_for_completion_timeout return value check

On Mon, 2022-04-11 at 10:30 +0000, Miaoqian Lin wrote:
> wait_for_completion_timeout() returns unsigned long not long.
> it returns 0 if timed out, and positive if completed.
> The check for <= 0 is ambiguous and should be == 0 here
> indicating timeout which is the only error case

Hello and thanks for your fix. Any specific reason you didn't apply this
also in function stmpe_read_temp?

Philippe

>
> Fixes: e813dde6f833 ("iio: stmpe-adc: Use
> wait_for_completion_timeout")
> Signed-off-by: Miaoqian Lin <[email protected]>
> ---
>  drivers/iio/adc/stmpe-adc.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/adc/stmpe-adc.c b/drivers/iio/adc/stmpe-adc.c
> index d2d405388499..d475d1c17bfc 100644
> --- a/drivers/iio/adc/stmpe-adc.c
> +++ b/drivers/iio/adc/stmpe-adc.c
> @@ -61,7 +61,7 @@ struct stmpe_adc {
>  static int stmpe_read_voltage(struct stmpe_adc *info,
>                 struct iio_chan_spec const *chan, int *val)
>  {
> -       long ret;
> +       unsigned long ret;
>  
>         mutex_lock(&info->lock);
>  
> @@ -79,7 +79,7 @@ static int stmpe_read_voltage(struct stmpe_adc
> *info,
>  
>         ret = wait_for_completion_timeout(&info->completion,
> STMPE_ADC_TIMEOUT);
>  
> -       if (ret <= 0) {
> +       if (ret == 0) {
>                 stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA,
>                                 STMPE_ADC_CH(info->channel));
>                 mutex_unlock(&info->lock);