A quick series with various improvements for
Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst.
* The first patch contains various fixes and some fine tuning.
* The second adds a few instructions for later testing of reverts,
fixes, or newer versions. This was already hinted at; but during some
early work on Documentation/admin-guide/reporting-issues.rst to better
reconcile the two it seemed wise to cover this properly here.
* The third patch briefly outlines how to build kernels on a different
host; it came into being after a second user within one week asked for
this. That also allowed the text to briefly cover cross-compilation.
---
Hi! While at it let me mention one more thing unrelated to the changes
where I'm unsure if the current approach by the text was a wise choice:
* Should the document tell users to avoid mainline during merge windows?
Some input from the community on this would be splendid.
Ciao, Thorsten
P.S.: Not totally sure, but I think this should go into 6.9 as this is
a new document; but I can split this up if the two latter patches better
should go into -next.
Thorsten Leemhuis (3):
docs: verify/bisect: git switch; proper headlines; various fixes;
docs: verify/bisect: explain testing reverts, patches and newer code
docs: verify/bisect: describe how to use a build host
.../verify-bugs-and-bisect-regressions.rst | 469 +++++++++++++-----
1 file changed, 344 insertions(+), 125 deletions(-)
base-commit: b8cfda5c9065cd619a97c17da081cbfab3b1e756
--
2.44.0
Describe how to build kernels on another system (with and without
cross-compiling), as building locally can be quite painfully on some
slow systems. This is done in an add-on section, as it would make the
step-by-step guide to complicated if this special case would be
described there.
Signed-off-by: Thorsten Leemhuis <[email protected]>
---
.../verify-bugs-and-bisect-regressions.rst | 78 ++++++++++++++++++-
1 file changed, 74 insertions(+), 4 deletions(-)
diff --git a/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst b/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
index 24a54fcd6abe1b..f371c48e9ef603 100644
--- a/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
+++ b/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
@@ -275,6 +275,10 @@ Preparations: set up everything to build your own kernels
The following steps lay the groundwork for all further tasks.
+Note: the instructions assume you are building and testing on the same
+machine; if you want to compile the kernel on another system, check
+:ref:`Build kernels on a different machine <buildhost_bis>` below.
+
.. _backup_bissbs:
* Create a fresh backup and put system repair and restore tools at hand, just
@@ -2096,11 +2100,77 @@ problems will arise if the kernelrelease identifier exceeds 63 characters.
[:ref:`back to step-by-step guide <introoptional_bissbs>`].
-Additional reading material
-===========================
+Additional information
+======================
+
+.. _buildhost_bis:
+
+Build kernels on a different machine
+------------------------------------
+
+To compile kernels on another system, slightly alter the step-by-step guide's
+instructions:
+
+* Start following the guide on the machine where you want to install and test
+ the kernels later.
+
+* After executing ':ref:`Boot into the working kernel and briefly use the
+ apparently broken feature <bootworking_bissbs>`', save the list of loaded
+ modules to a file using ``lsmod > ~/test-machine-lsmod``. Then locate the
+ build configuration for the running kernel (see ':ref:`Start defining the
+ build configuration for your kernel <oldconfig_bisref>`' for hints on where
+ to find it) and store it as '~/test-machine-config-working'. Transfer both
+ files to the home directory of your build host.
+
+* Continue the guide on the build host (e.g. with ':ref:`Ensure to have enough
+ free space for building [...] <diskspace_bissbs>`').
+
+* When you reach ':ref:`Start preparing a kernel build configuration[...]
+ <oldconfig_bissbs>`': before running ``make olddefconfig`` for the first time,
+ execute the following command to base your configuration on the one from the
+ test machine's 'working' kernel::
+
+ cp ~/test-machine-config-working ~/linux/.config
+
+* During the next step to ':ref:`disable any apparently superfluous kernel
+ modules <localmodconfig_bissbs>`' use the following command instead::
+
+ yes '' | make localmodconfig LSMOD=~/lsmod_foo-machine localmodconfig
+
+* Continue the guide, but ignore the instructions outlining how to compile,
+ install, and reboot into a kernel every time they come up. Instead build
+ like this::
-Further sources
----------------
+ cp ~/kernel-config-working .config
+ make olddefconfig &&
+ make -j $(nproc --all) targz-pkg
+
+ This will generate a gzipped tar file whose name is printed in the last
+ line shown; for example, a kernel with the kernelrelease identifier
+ '6.0.0-rc1-local-g928a87efa423' built for x86 machines usually will
+ be stored as '~/linux/linux-6.0.0-rc1-local-g928a87efa423-x86.tar.gz'.
+
+ Copy that file to your test machine's home directory.
+
+* Switch to the test machine to check if you have enough space to hold another
+ kernel. Then extract the file you transferred::
+
+ sudo tar -xvzf ~/linux-6.0.0-rc1-local-g928a87efa423-x86.tar.gz -C /
+
+ Afterwards :ref:`generate the initramfs and add the kernel to your boot
+ loader's configuration <install_bisref>`; on some distributions the following
+ command will take care of both these tasks::
+
+ sudo /sbin/installkernel 6.0.0-rc1-local-g928a87efa423 /boot/vmlinuz-6.0.0-rc1-local-g928a87efa423
+
+ Now reboot and ensure you started the intended kernel.
+
+This approach even works when building for another architecture: just install
+cross-compilers and add the appropriate parameters to every invocation of make
+(e.g. ``make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- [...]``).
+
+Additional reading material
+---------------------------
* The `man page for 'git bisect' <https://git-scm.com/docs/git-bisect>`_ and
`fighting regressions with 'git bisect' <https://git-scm.com/docs/git-bisect-lk2009.html>`_
--
2.44.0
Rename 'Supplementary tasks' to 'Complementary tasks' while introducing
a section 'Optional tasks: test reverts, patches, or later versions':
the latter is something readers occasionally will have to do after
reporting a bug and thus is best covered here.
Signed-off-by: Thorsten Leemhuis <[email protected]>
---
.../verify-bugs-and-bisect-regressions.rst | 128 ++++++++++++++++--
1 file changed, 115 insertions(+), 13 deletions(-)
diff --git a/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst b/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
index 2aa9eafa4cfdec..24a54fcd6abe1b 100644
--- a/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
+++ b/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
@@ -161,7 +161,7 @@ will be considered the 'good' release and used to prepare the .config file.
this step (e.g. build, install, boot, and test a kernel to then tell Git
the outcome). Do so again and again until Git shows which commit broke
things. If you run short of disk space during this process, check the
- section 'Supplementary tasks: cleanup during and after the process'
+ section 'Complementary tasks: cleanup during and after the process'
below.
d) Once your finished the bisection, put a few things away::
@@ -183,7 +183,7 @@ will be considered the 'good' release and used to prepare the .config file.
kernel; just this time skip the first command copying the base .config file
over, as that already has been taken care off.
-* **Supplementary tasks**: cleanup during and after the process.
+* **Complementary tasks**: cleanup during and after the process.
a) To avoid running out of disk space during a bisection, you might need to
remove some kernels you built earlier. You most likely want to keep those
@@ -206,6 +206,18 @@ will be considered the 'good' release and used to prepare the .config file.
the kernels you built earlier and later you might want to keep around for
a week or two.
+* **Optional task**: test a debug patch or a proposed fix later::
+
+ git fetch mainline
+ git switch --discard-changes --detach mainline/master
+ git apply /tmp/foobars-proposed-fix-v1.patch
+ cp ~/kernel-config-working .config
+ ./scripts/config --set-str CONFIG_LOCALVERSION '-local-foobars-fix-v1'
+
+ Build, install, and boot a kernel as described in *segment 1, section b* --
+ but this time omit the first command copying the build configuration over,
+ as that has been taken care of already.
+
.. _introguide_bissbs:
Step-by-step guide on how to verify bugs and bisect regressions
@@ -233,7 +245,9 @@ developers are obliged to act upon.
:ref:`Segment 3: perform a bisection and validate the result <introbisect_bissbs>`.
- :ref:`Supplementary tasks: cleanup during and after following this guide <introclosure_bissbs>`.
+ :ref:`Complementary tasks: cleanup during and after following this guide <introclosure_bissbs>`.
+
+ :ref:`Optional tasks: test reverts, patches, or later versions <introoptional_bissbs>`.
The steps in each segment illustrate the important aspects of the process, while
a comprehensive reference section holds additional details for almost all of the
@@ -655,7 +669,7 @@ be a waste of time. [:ref:`details <introlatestcheck_bisref>`]
Do you follow this guide to verify if a problem is present in the code
currently supported by Linux kernel developers? Then you are done at this
point. If you later want to remove the kernel you just built, check out
-:ref:`Supplementary tasks: cleanup during and after following this guide <introclosure_bissbs>`.
+:ref:`Complementary tasks: cleanup during and after following this guide <introclosure_bissbs>`.
In case you face a regression, move on and execute at least the next segment
as well.
@@ -881,7 +895,7 @@ each kernel on commodity x86 machines.
.. _introclosure_bissbs:
-Supplementary tasks: cleanup during and after the bisection
+Complementary tasks: cleanup during and after the bisection
-----------------------------------------------------------
During and after following this guide you might want or need to remove some of
@@ -943,6 +957,81 @@ space might run out.
[:ref:`details <finishingtouch_bisref>`]
+.. _introoptional_bissbs:
+
+Optional: test reverts, patches, or later versions
+--------------------------------------------------
+
+While or after reporting a bug, you might want or potentially will be asked to
+test reverts, debug patches, proposed fixes, or other versions. In that case
+follow these instructions.
+
+* Update your Git clone and check out the latest code.
+
+ * In case you want to test mainline, fetch its latest changes before checking
+ its code out::
+
+ git fetch mainline
+ git switch --discard-changes --detach mainline/master
+
+ * In case you want to test a stable or longterm kernel, first add the branch
+ holding the series you are interested in (6.2 in the example), unless you
+ already did so earlier::
+
+ git remote set-branches --add stable linux-6.2.y
+
+ Then fetch the latest changes and check out the latest version from the
+ series::
+
+ git fetch stable
+ git switch --discard-changes --detach stable/linux-6.2.y
+
+* Copy your kernel build configuration over::
+
+ cp ~/kernel-config-working .config
+
+* Your next step depends on what you want to do:
+
+ * In case you just want to test the latest codebase, head to the next step,
+ you are already all set.
+
+ * In case you want to test if a revert fixes an issue, revert one or multiple
+ changes by specifying their commit ids::
+
+ git revert --no-edit cafec0cacaca0
+
+ Now give that kernel a special tag to facilitates its identification and
+ prevent accidentally overwriting another kernel::
+
+ ./scripts/config --set-str CONFIG_LOCALVERSION '-local-cafec0cacaca0-reverted'
+
+ * In case you want to test a patch, store the patch in a file like
+ '/tmp/foobars-proposed-fix-v1.patch' and apply it like this::
+
+ git apply /tmp/foobars-proposed-fix-v1.patch
+
+ In case of multiple patches, repeat this step with the others.
+
+ Now give that kernel a special tag to facilitates its identification and
+ prevent accidentally overwriting another kernel::
+
+ ./scripts/config --set-str CONFIG_LOCALVERSION '-local-foobars-fix-v1'
+
+* Build a kernel using the familiar commands, just without copying the kernel
+ build configuration over, as that has been taken care of already::
+
+ make olddefconfig &&
+ make -j $(nproc --all)
+ # * Check if the free space suffices holding another kernel:
+ df -h /boot/ /lib/modules/
+ sudo make modules_install
+ command -v installkernel && sudo make install
+ make -s kernelrelease | tee -a ~/kernels-built
+ reboot
+
+* Now verify you booted the newly built kernel and check it.
+
+[:ref:`details <introoptional_bisref>`]
.. _submit_improvements:
@@ -1979,20 +2068,33 @@ build artifacts and the Linux sources, but will leave the Git repository
(~/linux/.git/) behind -- a simple ``git reset --hard`` thus will bring the
sources back.
-Removing the repository as well would likely be unwise at this point: there is a
-decent chance developers will ask you to build another kernel to perform
-additional tests. This is often required to debug an issue or check proposed
-fixes. Before doing so you want to run the ``git fetch mainline`` command again
-followed by ``git checkout mainline/master`` to bring your clone up to date and
-checkout the latest codebase. Then apply the patch using ``git apply
-<filename>`` or ``git am <filename>`` and build yet another kernel using the
-familiar commands.
+Removing the repository as well would likely be unwise at this point: there
+is a decent chance developers will ask you to build another kernel to
+perform additional tests -- like testing a debug patch or a proposed fix.
+Details on how to perform those can be found in the section :ref:`Optional
+tasks: test reverts, patches, or later versions <introoptional_bissbs>`.
Additional tests are also the reason why you want to keep the
~/kernel-config-working file around for a few weeks.
[:ref:`back to step-by-step guide <finishingtouch_bissbs>`]
+.. _introoptional_bisref:
+
+Test reverts, patches, or later versions
+----------------------------------------
+
+ *While or after reporting a bug, you might want or potentially will be asked
+ to test reverts, patches, proposed fixes, or other versions.*
+ [:ref:`... <introoptional_bissbs>`]
+
+All the commands used in this section should be pretty straight forward, so
+there is not much to add except one thing: when setting a kernel tag as
+instructed, ensure it is not much longer than the one used in the example, as
+problems will arise if the kernelrelease identifier exceeds 63 characters.
+
+[:ref:`back to step-by-step guide <introoptional_bissbs>`].
+
Additional reading material
===========================
--
2.44.0
Various small improvements and fixes:
* Use the more modern 'git switch' instead of 'git checkout', which
makes it more obvious what's happening (among others due to the
--discard-changes parameter that is more clear than --force).
* Separate ref links from their target with a space for better
readability.
* Add a proper heading for the note at the end of the step-by-step
guide.
* Use proper 3rd and 4th level headlines in the reference section and
add short intros for the 2nd level headlines that lacked one.
* When trying to validate the bisection result with a revert, add a
special tag to facilitate the identification.
* Fix a few typos and oddities.
Signed-off-by: Thorsten Leemhuis <[email protected]>
---
.../verify-bugs-and-bisect-regressions.rst | 269 ++++++++++--------
1 file changed, 158 insertions(+), 111 deletions(-)
diff --git a/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst b/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
index d3504826f40154..2aa9eafa4cfdec 100644
--- a/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
+++ b/Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst
@@ -29,7 +29,7 @@ The essence of the process (aka 'TL;DR')
========================================
*[If you are new to building or bisecting Linux, ignore this section and head
-over to the* ":ref:`step-by-step guide<introguide_bissbs>`" *below. It utilizes
+over to the* ':ref:`step-by-step guide <introguide_bissbs>`' *below. It utilizes
the same commands as this section while describing them in brief fashion. The
steps are nevertheless easy to follow and together with accompanying entries
in a reference section mention many alternatives, pitfalls, and additional
@@ -61,7 +61,7 @@ will be considered the 'good' release and used to prepare the .config file.
cd ~/linux/
git remote add -t master stable \
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
- git checkout --detach v6.0
+ git switch --detach v6.0
# * Hint: if you used an existing clone, ensure no stale .config is around.
make olddefconfig
# * Ensure the former command picked the .config of the 'working' kernel.
@@ -87,7 +87,7 @@ will be considered the 'good' release and used to prepare the .config file.
a) Checking out latest mainline code::
cd ~/linux/
- git checkout --force --detach mainline/master
+ git switch --discard-changes --detach mainline/master
b) Build, install, and boot a kernel::
@@ -125,7 +125,7 @@ will be considered the 'good' release and used to prepare the .config file.
a) Start by checking out the sources of the 'good' version::
cd ~/linux/
- git checkout --force --detach v6.0
+ git switch --discard-changes --detach v6.0
b) Build, install, and boot a kernel as described earlier in *segment 1,
section b* -- just feel free to skip the 'du' commands, as you have a rough
@@ -157,11 +157,12 @@ will be considered the 'good' release and used to prepare the .config file.
works with the newly built kernel. If it does, tell Git by executing
``git bisect good``; if it does not, run ``git bisect bad`` instead.
- All three commands will make Git checkout another commit; then re-execute
+ All three commands will make Git check out another commit; then re-execute
this step (e.g. build, install, boot, and test a kernel to then tell Git
the outcome). Do so again and again until Git shows which commit broke
things. If you run short of disk space during this process, check the
- "Supplementary tasks" section below.
+ section 'Supplementary tasks: cleanup during and after the process'
+ below.
d) Once your finished the bisection, put a few things away::
@@ -172,12 +173,15 @@ will be considered the 'good' release and used to prepare the .config file.
e) Try to verify the bisection result::
- git checkout --force --detach mainline/master
+ git switch --discard-changes --detach mainline/master
git revert --no-edit cafec0cacaca0
+ cp ~/kernel-config-working .config
+ ./scripts/config --set-str CONFIG_LOCALVERSION '-local-cafec0cacaca0-reverted'
This is optional, as some commits are impossible to revert. But if the
second command worked flawlessly, build, install, and boot one more kernel
- kernel, which should not show the regression.
+ kernel; just this time skip the first command copying the base .config file
+ over, as that already has been taken care off.
* **Supplementary tasks**: cleanup during and after the process.
@@ -208,7 +212,7 @@ Step-by-step guide on how to verify bugs and bisect regressions
===============================================================
This guide describes how to set up your own Linux kernels for investigating bugs
-or regressions you intent to report. How far you want to follow the instructions
+or regressions you intend to report. How far you want to follow the instructions
depends on your issue:
Execute all steps till the end of *segment 1* to **verify if your kernel problem
@@ -221,15 +225,15 @@ report; instead of the latter your could also head straight on and follow
*segment 3* to **perform a bisection** for a full-fledged regression report
developers are obliged to act upon.
- :ref:`Preparations: set up everything to build your own kernels.<introprep_bissbs>`
+ :ref:`Preparations: set up everything to build your own kernels <introprep_bissbs>`.
- :ref:`Segment 1: try to reproduce the problem with the latest codebase.<introlatestcheck_bissbs>`
+ :ref:`Segment 1: try to reproduce the problem with the latest codebase <introlatestcheck_bissbs>`.
- :ref:`Segment 2: check if the kernels you build work fine.<introworkingcheck_bissbs>`
+ :ref:`Segment 2: check if the kernels you build work fine <introworkingcheck_bissbs>`.
- :ref:`Segment 3: perform a bisection and validate the result.<introbisect_bissbs>`
+ :ref:`Segment 3: perform a bisection and validate the result <introbisect_bissbs>`.
- :ref:`Supplementary tasks: cleanup during and after following this guide.<introclosure_bissbs>`
+ :ref:`Supplementary tasks: cleanup during and after following this guide <introclosure_bissbs>`.
The steps in each segment illustrate the important aspects of the process, while
a comprehensive reference section holds additional details for almost all of the
@@ -247,17 +251,22 @@ regression and its culprit might be known already. For further details on
what actually qualifies as a regression check out
Documentation/admin-guide/reporting-regressions.rst.
+If you run into any problems while following this guide or have ideas how to
+improve it, :ref:`please let the kernel developers know <submit_improvements>`.
+
.. _introprep_bissbs:
Preparations: set up everything to build your own kernels
---------------------------------------------------------
+The following steps lay the groundwork for all further tasks.
+
.. _backup_bissbs:
* Create a fresh backup and put system repair and restore tools at hand, just
to be prepared for the unlikely case of something going sideways.
- [:ref:`details<backup_bisref>`]
+ [:ref:`details <backup_bisref>`]
.. _vanilla_bissbs:
@@ -265,7 +274,7 @@ Preparations: set up everything to build your own kernels
builds them automatically. That includes but is not limited to DKMS, openZFS,
VirtualBox, and Nvidia's graphics drivers (including the GPLed kernel module).
- [:ref:`details<vanilla_bisref>`]
+ [:ref:`details <vanilla_bisref>`]
.. _secureboot_bissbs:
@@ -276,7 +285,7 @@ Preparations: set up everything to build your own kernels
their restrictions through a process initiated by
``mokutil --disable-validation``.
- [:ref:`details<secureboot_bisref>`]
+ [:ref:`details <secureboot_bisref>`]
.. _rangecheck_bissbs:
@@ -311,13 +320,13 @@ Preparations: set up everything to build your own kernels
throughout this guide will refer to the last kernel that has been working
fine.*
- [:ref:`details<rangecheck_bisref>`]
+ [:ref:`details <rangecheck_bisref>`]
.. _bootworking_bissbs:
* Boot into the 'working' kernel and briefly use the apparently broken feature.
- [:ref:`details<bootworking_bisref>`]
+ [:ref:`details <bootworking_bisref>`]
.. _diskspace_bissbs:
@@ -327,7 +336,7 @@ Preparations: set up everything to build your own kernels
debug symbols: both explain approaches reducing the amount of space, which
should allow you to master these tasks with about 4 Gigabytes free space.
- [:ref:`details<diskspace_bisref>`]
+ [:ref:`details <diskspace_bisref>`]
.. _buildrequires_bissbs:
@@ -337,7 +346,7 @@ Preparations: set up everything to build your own kernels
reference section shows how to quickly install those on various popular Linux
distributions.
- [:ref:`details<buildrequires_bisref>`]
+ [:ref:`details <buildrequires_bisref>`]
.. _sources_bissbs:
@@ -360,14 +369,14 @@ Preparations: set up everything to build your own kernels
git remote add -t master stable \
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
- [:ref:`details<sources_bisref>`]
+ [:ref:`details <sources_bisref>`]
.. _oldconfig_bissbs:
* Start preparing a kernel build configuration (the '.config' file).
Before doing so, ensure you are still running the 'working' kernel an earlier
- step told you to boot; if you are unsure, check the current kernel release
+ step told you to boot; if you are unsure, check the current kernelrelease
identifier using ``uname -r``.
Afterwards check out the source code for the version earlier established as
@@ -375,7 +384,7 @@ Preparations: set up everything to build your own kernels
the version number in this and all later Git commands needs to be prefixed
with a 'v'::
- git checkout --detach v6.0
+ git switch --discard-changes --detach v6.0
Now create a build configuration file::
@@ -398,7 +407,7 @@ Preparations: set up everything to build your own kernels
'make olddefconfig' again and check if it now picked up the right config file
as base.
- [:ref:`details<oldconfig_bisref>`]
+ [:ref:`details <oldconfig_bisref>`]
.. _localmodconfig_bissbs:
@@ -432,7 +441,7 @@ Preparations: set up everything to build your own kernels
spending much effort on, as long as it boots and allows to properly test the
feature that causes trouble.
- [:ref:`details<localmodconfig_bisref>`]
+ [:ref:`details <localmodconfig_bisref>`]
.. _tagging_bissbs:
@@ -442,7 +451,7 @@ Preparations: set up everything to build your own kernels
./scripts/config --set-str CONFIG_LOCALVERSION '-local'
./scripts/config -e CONFIG_LOCALVERSION_AUTO
- [:ref:`details<tagging_bisref>`]
+ [:ref:`details <tagging_bisref>`]
.. _debugsymbols_bissbs:
@@ -461,7 +470,7 @@ Preparations: set up everything to build your own kernels
./scripts/config -d DEBUG_INFO -d DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT \
-d DEBUG_INFO_DWARF4 -d DEBUG_INFO_DWARF5 -e CONFIG_DEBUG_INFO_NONE
- [:ref:`details<debugsymbols_bisref>`]
+ [:ref:`details <debugsymbols_bisref>`]
.. _configmods_bissbs:
@@ -471,14 +480,14 @@ Preparations: set up everything to build your own kernels
* Are you running Debian? Then you want to avoid known problems by performing
additional adjustments explained in the reference section.
- [:ref:`details<configmods_distros_bisref>`].
+ [:ref:`details <configmods_distros_bisref>`].
* If you want to influence other aspects of the configuration, do so now using
your preferred tool. Note, to use make targets like 'menuconfig' or
'nconfig', you will need to install the development files of ncurses; for
'xconfig' you likewise need the Qt5 or Qt6 headers.
- [:ref:`details<configmods_individual_bisref>`].
+ [:ref:`details <configmods_individual_bisref>`].
.. _saveconfig_bissbs:
@@ -488,7 +497,7 @@ Preparations: set up everything to build your own kernels
make olddefconfig
cp .config ~/kernel-config-working
- [:ref:`details<saveconfig_bisref>`]
+ [:ref:`details <saveconfig_bisref>`]
.. _introlatestcheck_bissbs:
@@ -498,16 +507,16 @@ Segment 1: try to reproduce the problem with the latest codebase
The following steps verify if the problem occurs with the code currently
supported by developers. In case you face a regression, it also checks that the
problem is not caused by some .config change, as reporting the issue then would
-be a waste of time. [:ref:`details<introlatestcheck_bisref>`]
+be a waste of time. [:ref:`details <introlatestcheck_bisref>`]
.. _checkoutmaster_bissbs:
* Check out the latest Linux codebase::
cd ~/linux/
- git checkout --force --detach mainline/master
+ git switch --discard-changes --detach mainline/master
- [:ref:`details<checkoutmaster_bisref>`]
+ [:ref:`details <checkoutmaster_bisref>`]
.. _build_bissbs:
@@ -522,7 +531,7 @@ be a waste of time. [:ref:`details<introlatestcheck_bisref>`]
reference section for alternatives, which obviously will require other
steps to install as well.
- [:ref:`details<build_bisref>`]
+ [:ref:`details <build_bisref>`]
.. _install_bissbs:
@@ -555,7 +564,7 @@ be a waste of time. [:ref:`details<introlatestcheck_bisref>`]
down: if you will build more kernels as described in segment 2 and 3, you will
have to perform those again after executing ``command -v installkernel [...]``.
- [:ref:`details<install_bisref>`]
+ [:ref:`details <install_bisref>`]
.. _storagespace_bissbs:
@@ -568,7 +577,7 @@ be a waste of time. [:ref:`details<introlatestcheck_bisref>`]
Write down or remember those two values for later: they enable you to prevent
running out of disk space accidentally during a bisection.
- [:ref:`details<storagespace_bisref>`]
+ [:ref:`details <storagespace_bisref>`]
.. _kernelrelease_bissbs:
@@ -595,7 +604,7 @@ be a waste of time. [:ref:`details<introlatestcheck_bisref>`]
If that command does not return '0', check the reference section, as the cause
for this might interfere with your testing.
- [:ref:`details<tainted_bisref>`]
+ [:ref:`details <tainted_bisref>`]
.. _recheckbroken_bissbs:
@@ -603,7 +612,7 @@ be a waste of time. [:ref:`details<introlatestcheck_bisref>`]
out the instructions in the reference section to ensure nothing went sideways
during your tests.
- [:ref:`details<recheckbroken_bisref>`]
+ [:ref:`details <recheckbroken_bisref>`]
.. _recheckstablebroken_bissbs:
@@ -617,7 +626,7 @@ be a waste of time. [:ref:`details<introlatestcheck_bisref>`]
cd ~/linux/
git remote set-branches --add stable linux-6.0.y
git fetch stable
- git checkout --force --detach linux-6.0.y
+ git switch --discard-changes --detach linux-6.0.y
Now use the checked out code to build and install another kernel using the
commands the earlier steps already described in more detail::
@@ -641,12 +650,12 @@ be a waste of time. [:ref:`details<introlatestcheck_bisref>`]
Now verify if this kernel is showing the problem.
- [:ref:`details<recheckstablebroken_bisref>`]
+ [:ref:`details <recheckstablebroken_bisref>`]
Do you follow this guide to verify if a problem is present in the code
currently supported by Linux kernel developers? Then you are done at this
point. If you later want to remove the kernel you just built, check out
-:ref:`Supplementary tasks: cleanup during and after following this guide<introclosure_bissbs>`.
+:ref:`Supplementary tasks: cleanup during and after following this guide <introclosure_bissbs>`.
In case you face a regression, move on and execute at least the next segment
as well.
@@ -658,7 +667,7 @@ Segment 2: check if the kernels you build work fine
In case of a regression, you now want to ensure the trimmed configuration file
you created earlier works as expected; a bisection with the .config file
-otherwise would be a waste of time. [:ref:`details<introworkingcheck_bisref>`]
+otherwise would be a waste of time. [:ref:`details <introworkingcheck_bisref>`]
.. _recheckworking_bissbs:
@@ -669,7 +678,7 @@ otherwise would be a waste of time. [:ref:`details<introworkingcheck_bisref>`]
'good' (once again assumed to be 6.0 here)::
cd ~/linux/
- git checkout --detach v6.0
+ git switch --discard-changes --detach v6.0
Now use the checked out code to configure, build, and install another kernel
using the commands the previous subsection explained in more detail::
@@ -693,7 +702,7 @@ otherwise would be a waste of time. [:ref:`details<introworkingcheck_bisref>`]
Now check if this kernel works as expected; if not, consult the reference
section for further instructions.
- [:ref:`details<recheckworking_bisref>`]
+ [:ref:`details <recheckworking_bisref>`]
.. _introbisect_bissbs:
@@ -725,7 +734,7 @@ each kernel on commodity x86 machines.
git bisect good v6.0
git bisect bad v6.1.5
- [:ref:`details<bisectstart_bisref>`]
+ [:ref:`details <bisectstart_bisref>`]
.. _bisectbuild_bissbs:
@@ -745,7 +754,7 @@ each kernel on commodity x86 machines.
If compilation fails for some reason, run ``git bisect skip`` and restart
executing the stack of commands from the beginning.
- In case you skipped the "test latest codebase" step in the guide, check its
+ In case you skipped the 'test latest codebase' step in the guide, check its
description as for why the 'df [...]' and 'make -s kernelrelease [...]'
commands are here.
@@ -754,7 +763,7 @@ each kernel on commodity x86 machines.
totally normal to see release identifiers like '6.0-rc1-local-gcafec0cacaca0'
if you bisect between versions 6.1 and 6.2 for example.
- [:ref:`details<bisectbuild_bisref>`]
+ [:ref:`details <bisectbuild_bisref>`]
.. _bisecttest_bissbs:
@@ -794,7 +803,7 @@ each kernel on commodity x86 machines.
might need to scroll up to see the message mentioning the culprit;
alternatively, run ``git bisect log > ~/bisection-log``.
- [:ref:`details<bisecttest_bisref>`]
+ [:ref:`details <bisecttest_bisref>`]
.. _bisectlog_bissbs:
@@ -806,7 +815,7 @@ each kernel on commodity x86 machines.
cp .config ~/bisection-config-culprit
git bisect reset
- [:ref:`details<bisectlog_bisref>`]
+ [:ref:`details <bisectlog_bisref>`]
.. _revert_bissbs:
@@ -827,12 +836,12 @@ each kernel on commodity x86 machines.
latest codebase for the affected series like this::
git fetch stable
- git checkout --force --detach linux-6.0.y
+ git switch --discard-changes --detach linux-6.0.y
* In all other cases check out latest mainline::
git fetch mainline
- git checkout --force --detach mainline/master
+ git switch --discard-changes --detach mainline/master
If you bisected a regression within a stable/longterm series that also
happens in mainline, there is one more thing to do: look up the mainline
@@ -846,23 +855,29 @@ each kernel on commodity x86 machines.
git revert --no-edit cafec0cacaca0
- If that fails, give up trying and move on to the next step. But if it works,
- build a kernel again using the familiar command sequence::
+ If that fails, give up trying and move on to the next step; if it works,
+ adjust the tag to facilitate the identification and prevent accidentally
+ overwriting another kernel::
cp ~/kernel-config-working .config
+ ./scripts/config --set-str CONFIG_LOCALVERSION '-local-cafec0cacaca0-reverted'
+
+ Build a kernel using the familiar command sequence, just without copying the
+ the base .config over::
+
make olddefconfig &&
- make -j $(nproc --all) &&
+ make -j $(nproc --all)
# * Check if the free space suffices holding another kernel:
df -h /boot/ /lib/modules/
sudo make modules_install
command -v installkernel && sudo make install
- Make -s kernelrelease | tee -a ~/kernels-built
+ make -s kernelrelease | tee -a ~/kernels-built
reboot
- Now check one last time if the feature that made you perform a bisection work
- with that kernel.
+ Now check one last time if the feature that made you perform a bisection works
+ with that kernel: if everything went well, it should not show the regression.
- [:ref:`details<revert_bisref>`]
+ [:ref:`details <revert_bisref>`]
.. _introclosure_bissbs:
@@ -903,7 +918,7 @@ space might run out.
kernel image and related files behind; in that case remove them as described
in the reference section.
- [:ref:`details<makeroom_bisref>`]
+ [:ref:`details <makeroom_bisref>`]
.. _finishingtouch_bissbs:
@@ -926,18 +941,24 @@ space might run out.
the version considered 'good', and the last three or four you compiled
during the actual bisection process.
- [:ref:`details<finishingtouch_bisref>`]
+ [:ref:`details <finishingtouch_bisref>`]
+
.. _submit_improvements:
-This concludes the step-by-step guide.
+Conclusion
+----------
+
+You have reached the end of the step-by-step guide.
Did you run into trouble following any of the above steps not cleared up by the
reference section below? Did you spot errors? Or do you have ideas how to
-improve the guide? Then please take a moment and let the maintainer of this
+improve the guide?
+
+If any of that applies, please take a moment and let the maintainer of this
document know by email (Thorsten Leemhuis <[email protected]>), ideally while
CCing the Linux docs mailing list ([email protected]). Such feedback is
-vital to improve this document further, which is in everybody's interest, as it
+vital to improve this text further, which is in everybody's interest, as it
will enable more people to master the task described here -- and hopefully also
improve similar guides inspired by this one.
@@ -948,10 +969,20 @@ Reference section for the step-by-step guide
This section holds additional information for almost all the items in the above
step-by-step guide.
+Preparations for building your own kernels
+------------------------------------------
+
+ *The steps in this section lay the groundwork for all further tests.*
+ [:ref:`... <introprep_bissbs>`]
+
+The steps in all later sections of this guide depend on those described here.
+
+[:ref:`back to step-by-step guide <introprep_bissbs>`].
+
.. _backup_bisref:
Prepare for emergencies
------------------------
+~~~~~~~~~~~~~~~~~~~~~~~
*Create a fresh backup and put system repair and restore tools at hand.*
[:ref:`... <backup_bissbs>`]
@@ -966,7 +997,7 @@ for something going sideways, even if that should not happen.
.. _vanilla_bisref:
Remove anything related to externally maintained kernel modules
----------------------------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Remove all software that depends on externally developed kernel drivers or
builds them automatically.* [:ref:`...<vanilla_bissbs>`]
@@ -984,7 +1015,7 @@ explains in more detail.
.. _secureboot_bisref:
Deal with techniques like Secure Boot
--------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*On platforms with 'Secure Boot' or similar techniques, prepare everything to
ensure the system will permit your self-compiled kernel to boot later.*
@@ -1021,7 +1052,7 @@ Afterwards, permit MokManager to reboot the machine.
.. _bootworking_bisref:
Boot the last kernel that was working
--------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Boot into the last working kernel and briefly recheck if the feature that
regressed really works.* [:ref:`...<bootworking_bissbs>`]
@@ -1034,7 +1065,7 @@ the right thing.
.. _diskspace_bisref:
Space requirements
-------------------
+~~~~~~~~~~~~~~~~~~
*Ensure to have enough free space for building Linux.*
[:ref:`... <diskspace_bissbs>`]
@@ -1052,7 +1083,7 @@ space by quite a few gigabytes.
.. _rangecheck_bisref:
Bisection range
----------------
+~~~~~~~~~~~~~~~
*Determine the kernel versions considered 'good' and 'bad' throughout this
guide.* [:ref:`...<rangecheck_bissbs>`]
@@ -1077,7 +1108,7 @@ to do this as well, if you tried bisecting between 6.0.11 and 6.1.13.
.. _buildrequires_bisref:
Install build requirements
---------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~
*Install all software required to build a Linux kernel.*
[:ref:`...<buildrequires_bissbs>`]
@@ -1117,7 +1148,7 @@ These commands install a few packages that are often, but not always needed. You
for example might want to skip installing the development headers for ncurses,
which you will only need in case you later might want to adjust the kernel build
configuration using make the targets 'menuconfig' or 'nconfig'; likewise omit
-the headers of Qt6 is you do not plan to adjust the .config using 'xconfig'.
+the headers of Qt6 if you do not plan to adjust the .config using 'xconfig'.
You furthermore might need additional libraries and their development headers
for tasks not covered in this guide -- for example when building utilities from
@@ -1128,7 +1159,7 @@ the kernel's tools/ directory.
.. _sources_bisref:
Download the sources using Git
-------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Retrieve the Linux mainline sources.*
[:ref:`...<sources_bissbs>`]
@@ -1148,7 +1179,7 @@ work better for you:
.. _sources_bundle_bisref:
Downloading Linux mainline sources using a bundle
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+"""""""""""""""""""""""""""""""""""""""""""""""""
Use the following commands to retrieve the Linux mainline sources using a
bundle::
@@ -1219,7 +1250,7 @@ Note, shallow clones have a few peculiar characteristics:
.. _oldconfig_bisref:
Start defining the build configuration for your kernel
-------------------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Start preparing a kernel build configuration (the '.config' file).*
[:ref:`... <oldconfig_bissbs>`]
@@ -1279,7 +1310,7 @@ that file to the build machine and store it as ~/linux/.config; afterwards run
.. _localmodconfig_bisref:
Trim the build configuration for your kernel
---------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Disable any kernel modules apparently superfluous for your setup.*
[:ref:`... <localmodconfig_bissbs>`]
@@ -1328,7 +1359,7 @@ step-by-step guide mentions::
.. _tagging_bisref:
Tag the kernels about to be build
----------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Ensure all the kernels you will build are clearly identifiable using a
special tag and a unique version identifier.* [:ref:`... <tagging_bissbs>`]
@@ -1344,7 +1375,7 @@ confusing during the bisection.
.. _debugsymbols_bisref:
Decide to enable or disable debug symbols
------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Decide how to handle debug symbols.* [:ref:`... <debugsymbols_bissbs>`]
@@ -1373,7 +1404,7 @@ explains this process in more detail.
.. _configmods_bisref:
Adjust build configuration
---------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~
*Check if you may want or need to adjust some other kernel configuration
options:*
@@ -1384,7 +1415,7 @@ kernel configuration options.
.. _configmods_distros_bisref:
Distro specific adjustments
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
+"""""""""""""""""""""""""""
*Are you running* [:ref:`... <configmods_bissbs>`]
@@ -1409,7 +1440,7 @@ when following this guide on a few commodity distributions.
.. _configmods_individual_bisref:
Individual adjustments
-~~~~~~~~~~~~~~~~~~~~~~
+""""""""""""""""""""""
*If you want to influence the other aspects of the configuration, do so
now.* [:ref:`... <configmods_bissbs>`]
@@ -1426,13 +1457,13 @@ is missing.
.. _saveconfig_bisref:
Put the .config file aside
---------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~
*Reprocess the .config after the latest changes and store it in a safe place.*
[:ref:`... <saveconfig_bissbs>`]
Put the .config you prepared aside, as you want to copy it back to the build
-directory every time during this guide before you start building another
+directory every time during this guide before you start building another
kernel. That's because going back and forth between different versions can alter
.config files in odd ways; those occasionally cause side effects that could
confuse testing or in some cases render the result of your bisection
@@ -1442,8 +1473,8 @@ meaningless.
.. _introlatestcheck_bisref:
-Try to reproduce the regression
------------------------------------------
+Try to reproduce the problem with the latest codebase
+-----------------------------------------------------
*Verify the regression is not caused by some .config change and check if it
still occurs with the latest codebase.* [:ref:`... <introlatestcheck_bissbs>`]
@@ -1490,28 +1521,28 @@ highly recommended for these reasons:
Your report might be ignored if you send it to the wrong party -- and even
when you get a reply there is a decent chance that developers tell you to
- evaluate which of the two cases it is before they take a closer look.
+ evaluate which of the two cases it is before they take a closer look.
[:ref:`back to step-by-step guide <introlatestcheck_bissbs>`]
.. _checkoutmaster_bisref:
Check out the latest Linux codebase
------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Check out the latest Linux codebase.*
- [:ref:`... <introlatestcheck_bissbs>`]
+ [:ref:`... <checkoutmaster_bissbs>`]
In case you later want to recheck if an ever newer codebase might fix the
problem, remember to run that ``git fetch --shallow-exclude [...]`` command
again mentioned earlier to update your local Git repository.
-[:ref:`back to step-by-step guide <introlatestcheck_bissbs>`]
+[:ref:`back to step-by-step guide <checkoutmaster_bissbs>`]
.. _build_bisref:
Build your kernel
------------------
+~~~~~~~~~~~~~~~~~
*Build the image and the modules of your first kernel using the config file
you prepared.* [:ref:`... <build_bissbs>`]
@@ -1521,7 +1552,7 @@ yourself. Another subsection explains how to directly package your kernel up as
deb, rpm or tar file.
Dealing with build errors
-~~~~~~~~~~~~~~~~~~~~~~~~~
+"""""""""""""""""""""""""
When a build error occurs, it might be caused by some aspect of your machine's
setup that often can be fixed quickly; other times though the problem lies in
@@ -1552,11 +1583,11 @@ by modifying your search terms or using another line from the error messages.
In the end, most issues you run into have likely been encountered and
reported by others already. That includes issues where the cause is not your
-system, but lies in the code. If you run into one of those, you might thus find a
-solution (e.g. a patch) or workaround for your issue, too.
+system, but lies in the code. If you run into one of those, you might thus find
+a solution (e.g. a patch) or workaround for your issue, too.
Package your kernel up
-~~~~~~~~~~~~~~~~~~~~~~
+""""""""""""""""""""""
The step-by-step guide uses the default make targets (e.g. 'bzImage' and
'modules' on x86) to build the image and the modules of your kernel, which later
@@ -1587,7 +1618,7 @@ distribution's kernel packages.
.. _install_bisref:
Put the kernel in place
------------------------
+~~~~~~~~~~~~~~~~~~~~~~~
*Install the kernel you just built.* [:ref:`... <install_bissbs>`]
@@ -1630,7 +1661,7 @@ process. Afterwards add your kernel to your bootloader configuration and reboot.
.. _storagespace_bisref:
Storage requirements per kernel
--------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Check how much storage space the kernel, its modules, and other related files
like the initramfs consume.* [:ref:`... <storagespace_bissbs>`]
@@ -1651,7 +1682,7 @@ need to look in different places.
.. _tainted_bisref:
Check if your newly built kernel considers itself 'tainted'
------------------------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Check if the kernel marked itself as 'tainted'.*
[:ref:`... <tainted_bissbs>`]
@@ -1670,7 +1701,7 @@ interest, as your testing might be flawed otherwise.
.. _recheckbroken_bisref:
Check the kernel built from a recent mainline codebase
-------------------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Verify if your bug occurs with the newly built kernel.*
[:ref:`... <recheckbroken_bissbs>`]
@@ -1696,7 +1727,7 @@ the kernel you built from the latest codebase. These are the most frequent:
.. _recheckstablebroken_bisref:
Check the kernel built from the latest stable/longterm codebase
----------------------------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Are you facing a regression within a stable/longterm release, but failed to
reproduce it with the kernel you just built using the latest mainline sources?
@@ -1741,7 +1772,7 @@ ensure the kernel version you assumed to be 'good' earlier in the process (e.g.
.. _recheckworking_bisref:
Build your own version of the 'good' kernel
--------------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Build your own variant of the working kernel and check if the feature that
regressed works as expected with it.* [:ref:`... <recheckworking_bissbs>`]
@@ -1767,15 +1798,25 @@ multitude of reasons why this might happen. Some ideas where to look:
Note, if you found and fixed problems with the .config file, you want to use it
to build another kernel from the latest codebase, as your earlier tests with
-mainline and the latest version from an affected stable/longterm series were most
-likely flawed.
+mainline and the latest version from an affected stable/longterm series were
+most likely flawed.
[:ref:`back to step-by-step guide <recheckworking_bissbs>`]
+Perform a bisection and validate the result
+-------------------------------------------
+
+ *With all the preparations and precaution builds taken care of, you are now
+ ready to begin the bisection.* [:ref:`... <introbisect_bissbs>`]
+
+The steps in this segment perform and validate the bisection.
+
+[:ref:`back to step-by-step guide <introbisect_bissbs>`].
+
.. _bisectstart_bisref:
Start the bisection
--------------------
+~~~~~~~~~~~~~~~~~~~
*Start the bisection and tell Git about the versions earlier established as
'good' and 'bad'.* [:ref:`... <bisectstart_bissbs>`]
@@ -1789,7 +1830,7 @@ for you to test.
.. _bisectbuild_bisref:
Build a kernel from the bisection point
----------------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*Build, install, and boot a kernel from the code Git checked out using the
same commands you used earlier.* [:ref:`... <bisectbuild_bissbs>`]
@@ -1817,7 +1858,7 @@ There are two things worth of note here:
.. _bisecttest_bisref:
Bisection checkpoint
---------------------
+~~~~~~~~~~~~~~~~~~~~
*Check if the feature that regressed works in the kernel you just built.*
[:ref:`... <bisecttest_bissbs>`]
@@ -1831,7 +1872,7 @@ will be for nothing.
.. _bisectlog_bisref:
Put the bisection log away
---------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~
*Store Git's bisection log and the current .config file in a safe place.*
[:ref:`... <bisectlog_bissbs>`]
@@ -1851,7 +1892,7 @@ ask for it after you report the regression.
.. _revert_bisref:
Try reverting the culprit
--------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~
*Try reverting the culprit on top of the latest codebase to see if this fixes
your regression.* [:ref:`... <revert_bissbs>`]
@@ -1869,14 +1910,20 @@ succeeds, test that kernel version instead.
[:ref:`back to step-by-step guide <revert_bissbs>`]
+Cleanup steps during and after following this guide
+---------------------------------------------------
-Supplementary tasks: cleanup during and after the bisection
------------------------------------------------------------
+ *During and after following this guide you might want or need to remove some
+ of the kernels you installed.* [:ref:`... <introclosure_bissbs>`]
+
+The steps in this section describe clean-up procedures.
+
+[:ref:`back to step-by-step guide <introclosure_bissbs>`].
.. _makeroom_bisref:
Cleaning up during the bisection
---------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*To remove one of the kernels you installed, look up its 'kernelrelease'
identifier.* [:ref:`... <makeroom_bissbs>`]
@@ -1917,7 +1964,7 @@ when all you want is to remove 6.0 or 6.0.1.
[:ref:`back to step-by-step guide <makeroom_bissbs>`]
Cleaning up after the bisection
--------------------------------
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. _finishingtouch_bisref:
--
2.44.0
On 01.04.24 11:29, Thorsten Leemhuis wrote:
> A quick series with various improvements for
> Documentation/admin-guide/verify-bugs-and-bisect-regressions.rst.
Feel free to ignore this series, I found another problem and will post a
v2 within a few days. Will likely also use that occasion to split the
first patch into two, it does a bit too much.
Ciao, Thorsten
> * The first patch contains various fixes and some fine tuning.
>
> * The second adds a few instructions for later testing of reverts,
> fixes, or newer versions. This was already hinted at; but during some
> early work on Documentation/admin-guide/reporting-issues.rst to better
> reconcile the two it seemed wise to cover this properly here.
>
> * The third patch briefly outlines how to build kernels on a different
> host; it came into being after a second user within one week asked for
> this. That also allowed the text to briefly cover cross-compilation.
> ---
>
> Hi! While at it let me mention one more thing unrelated to the changes
> where I'm unsure if the current approach by the text was a wise choice:
>
> * Should the document tell users to avoid mainline during merge windows?
>
> Some input from the community on this would be splendid.
>
> Ciao, Thorsten
>
> P.S.: Not totally sure, but I think this should go into 6.9 as this is
> a new document; but I can split this up if the two latter patches better
> should go into -next.
>
> Thorsten Leemhuis (3):
> docs: verify/bisect: git switch; proper headlines; various fixes;
> docs: verify/bisect: explain testing reverts, patches and newer code
> docs: verify/bisect: describe how to use a build host
>
> .../verify-bugs-and-bisect-regressions.rst | 469 +++++++++++++-----
> 1 file changed, 344 insertions(+), 125 deletions(-)
>
>
> base-commit: b8cfda5c9065cd619a97c17da081cbfab3b1e756