2023-07-11 09:40:21

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v2 1/3] dt-bindings: watchdog: ti,rti-wdt: Add support for WDIOF_CARDRESET

On 11/07/2023 11:17, [email protected] wrote:
> From: Li Hua Qian <[email protected]>
>
> TI RTI (Real Time Interrupt) Watchdog doesn't support to record the
> watchdog cause. Add a reserved memory to know the last reboot was caused
> by the watchdog card. In the reserved memory, some specific info will be
> saved to indicate whether the watchdog reset was triggered in last
> boot.
>
> Signed-off-by: Li Hua Qian <[email protected]>
> ---

Missing changelog.

> .../devicetree/bindings/watchdog/ti,rti-wdt.yaml | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
> index fc553211e42d..f227db08dc70 100644
> --- a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
> @@ -26,7 +26,18 @@ properties:
> - ti,j7-rti-wdt
>
> reg:
> - maxItems: 1
> + maxItems: 2

The expected syntax is in such case:
items:
- description: ...
- description: ...

You will find plenty of examples for this.

> + description:
> + - Contains the address and the size of MCU RTI register.
> + - Contains the address and the size of reserved memory, which

I don't think Conor suggested using reg of the device, but reg of
reserved memory. This is not device address space, but just some random
memory.

memory-region seems proper to me. We were just discussing totally
useless new property of size.

What's more - you did not test it... so usual template:

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

Best regards,
Krzysztof



2023-07-12 02:00:20

by Li, Hua Qian

[permalink] [raw]
Subject: Re: [PATCH v2 1/3] dt-bindings: watchdog: ti,rti-wdt: Add support for WDIOF_CARDRESET

On Tue, 2023-07-11 at 11:23 +0200, Krzysztof Kozlowski wrote:
> On 11/07/2023 11:17, [email protected] wrote:
> > From: Li Hua Qian <[email protected]>
> >
> > TI RTI (Real Time Interrupt) Watchdog doesn't support to record the
> > watchdog cause. Add a reserved memory to know the last reboot was
> > caused
> > by the watchdog card. In the reserved memory, some specific info
> > will be
> > saved to indicate whether the watchdog reset was triggered in last
> > boot.
> >
> > Signed-off-by: Li Hua Qian <[email protected]>
> > ---
>
> Missing changelog.
Thanks for pointing out.
>
> >  .../devicetree/bindings/watchdog/ti,rti-wdt.yaml    | 13
> > ++++++++++++-
> >  1 file changed, 12 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/watchdog/ti,rti-
> > wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,rti-
> > wdt.yaml
> > index fc553211e42d..f227db08dc70 100644
> > --- a/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
> > +++ b/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml
> > @@ -26,7 +26,18 @@ properties:
> >        - ti,j7-rti-wdt
> >  
> >    reg:
> > -    maxItems: 1
> > +    maxItems: 2
>
> The expected syntax is in such case:
>   items:
>     - description: ...
>     - description: ...
>
> You will find plenty of examples for this.
>
> > +      description:
> > +       - Contains the address and the size of MCU RTI register.
> > +       - Contains the address and the size of reserved memory,
> > which
>
> I don't think Conor suggested using reg of the device, but reg of
> reserved memory. This is not device address space, but just some
> random
> memory.
>
> memory-region seems proper to me. We were just discussing totally
> useless new property of size.
I guess I misunderstood what Conor suggested, I will change back to
memory-region and get size from reserved-memory. Does this look good
to you?
>
> What's more - you did not test it... so usual template:
>
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).
>
> Best regards,
> Krzysztof
>
Sorry for this, I will make sure this is no problem in the next
version.

Best regards,
Li Hua Qian