2018-07-11 16:35:20

by Colin King

[permalink] [raw]
Subject: [PATCH][scsi-next] scsi: lpfc: fix null pointer dereference on nvmebuf

From: Colin Ian King <[email protected]>

The check of nvmebuf suggests that it can be null, however a recent
change dereferences it to determine oxid before it is null checked,
hence there is a potential null deference on the pointer. Fix this
by performing the null check first. Also remove the oxid from the
debug log message as this is no longer valid. I considered an early
fetch of oxid if nvmebuf was valid, however, what oxid should be set
to if nvembuf is null could lead to an ambiguous logging of an invalid
oxid, so I thought just removing it from the logging was the least
confusion solution.

Detected by CoverityScan, CID#1471753 ("Dereference before null check")

Fixes: 68c9b55deea5 ("scsi: lpfc: Fix abort error path for NVMET")
Signed-off-by: Colin Ian King <[email protected]>
---
drivers/scsi/lpfc/lpfc_nvmet.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index 22f8a204b69f..01652d9ac619 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -1742,12 +1742,9 @@ lpfc_nvmet_unsol_ls_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
uint32_t *payload;
uint32_t size, oxid, sid, rc;

- fc_hdr = (struct fc_frame_header *)(nvmebuf->hbuf.virt);
- oxid = be16_to_cpu(fc_hdr->fh_ox_id);
-
if (!nvmebuf || !phba->targetport) {
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
- "6154 LS Drop IO x%x\n", oxid);
+ "6154 LS Drop IO\n");
oxid = 0;
size = 0;
sid = 0;
@@ -1755,6 +1752,9 @@ lpfc_nvmet_unsol_ls_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
goto dropit;
}

+ fc_hdr = (struct fc_frame_header *)(nvmebuf->hbuf.virt);
+ oxid = be16_to_cpu(fc_hdr->fh_ox_id);
+
tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
payload = (uint32_t *)(nvmebuf->dbuf.virt);
size = bf_get(lpfc_rcqe_length, &nvmebuf->cq_event.cqe.rcqe_cmpl);
--
2.17.1



2018-07-11 20:46:02

by James Bottomley

[permalink] [raw]
Subject: Re: [PATCH][scsi-next] scsi: lpfc: fix null pointer dereference on nvmebuf

On Wed, 2018-07-11 at 14:44 +0100, Colin King wrote:
> From: Colin Ian King <[email protected]>
>
> The check of nvmebuf suggests that it can be null, however a recent
> change dereferences it to determine oxid before it is null checked,
> hence there is a potential null deference on the pointer.  Fix this
> by performing the null check first.  Also remove the oxid from the
> debug log message as this is no longer valid.  I considered an early
> fetch of oxid if nvmebuf was valid, however, what oxid should be set
> to if nvembuf is null could lead to an ambiguous logging of an
> invalid
> oxid, so I thought just removing it from the logging was the least
> confusion solution.
>
> Detected by CoverityScan, CID#1471753 ("Dereference before null
> check")
>
> Fixes: 68c9b55deea5 ("scsi: lpfc: Fix abort error path for NVMET")
> Signed-off-by: Colin Ian King <[email protected]>
> ---
>  drivers/scsi/lpfc/lpfc_nvmet.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c
> b/drivers/scsi/lpfc/lpfc_nvmet.c
> index 22f8a204b69f..01652d9ac619 100644
> --- a/drivers/scsi/lpfc/lpfc_nvmet.c
> +++ b/drivers/scsi/lpfc/lpfc_nvmet.c
> @@ -1742,12 +1742,9 @@ lpfc_nvmet_unsol_ls_buffer(struct lpfc_hba
> *phba, struct lpfc_sli_ring *pring,
>   uint32_t *payload;
>   uint32_t size, oxid, sid, rc;
>  
> - fc_hdr = (struct fc_frame_header *)(nvmebuf->hbuf.virt);
> - oxid = be16_to_cpu(fc_hdr->fh_ox_id);
> -
>   if (!nvmebuf || !phba->targetport) {

The !nvmebuf is a bogus check, isn't it? since nvmebuf is always
obtained from a container_of, it can never be NULL. This would mean
the rest of the contortions are unnecessary.

James


2018-07-11 21:00:19

by Tomas Henzl

[permalink] [raw]
Subject: Re: [PATCH][scsi-next] scsi: lpfc: fix null pointer dereference on nvmebuf

On 07/11/2018 03:44 PM, Colin King wrote:
> From: Colin Ian King <[email protected]>
>
> The check of nvmebuf suggests that it can be null, however a recent
> change dereferences it to determine oxid before it is null checked,
> hence there is a potential null deference on the pointer. Fix this
> by performing the null check first. Also remove the oxid from the
> debug log message as this is no longer valid. I considered an early
> fetch of oxid if nvmebuf was valid, however, what oxid should be set
> to if nvembuf is null could lead to an ambiguous logging of an invalid
> oxid, so I thought just removing it from the logging was the least
> confusion solution.

I think that the 'if (!nvmebuf)' test is not needed and it would be better to remove the
tests (it is tested for the second time later in the function).
Tomas

>
> Detected by CoverityScan, CID#1471753 ("Dereference before null check")
>
> Fixes: 68c9b55deea5 ("scsi: lpfc: Fix abort error path for NVMET")
> Signed-off-by: Colin Ian King <[email protected]>
> ---
> drivers/scsi/lpfc/lpfc_nvmet.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
> index 22f8a204b69f..01652d9ac619 100644
> --- a/drivers/scsi/lpfc/lpfc_nvmet.c
> +++ b/drivers/scsi/lpfc/lpfc_nvmet.c
> @@ -1742,12 +1742,9 @@ lpfc_nvmet_unsol_ls_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
> uint32_t *payload;
> uint32_t size, oxid, sid, rc;
>
> - fc_hdr = (struct fc_frame_header *)(nvmebuf->hbuf.virt);
> - oxid = be16_to_cpu(fc_hdr->fh_ox_id);
> -
> if (!nvmebuf || !phba->targetport) {
> lpfc_printf_log(phba, KERN_ERR, LOG_NVME_IOERR,
> - "6154 LS Drop IO x%x\n", oxid);
> + "6154 LS Drop IO\n");
> oxid = 0;
> size = 0;
> sid = 0;
> @@ -1755,6 +1752,9 @@ lpfc_nvmet_unsol_ls_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
> goto dropit;
> }
>
> + fc_hdr = (struct fc_frame_header *)(nvmebuf->hbuf.virt);
> + oxid = be16_to_cpu(fc_hdr->fh_ox_id);
> +
> tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
> payload = (uint32_t *)(nvmebuf->dbuf.virt);
> size = bf_get(lpfc_rcqe_length, &nvmebuf->cq_event.cqe.rcqe_cmpl);