Use already prepared dev_err_probe() introduced by commit a787e5400a1c
("driver core: add device probe log helper").
It simplifies EPROBE_DEFER handling.
Also unify message format for similar error cases.
Signed-off-by: Michal Simek <[email protected]>
---
drivers/net/can/xilinx_can.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 37fa19c62d73..3b883e607d8b 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c
@@ -1772,17 +1772,15 @@ static int xcan_probe(struct platform_device *pdev)
/* Getting the CAN can_clk info */
priv->can_clk = devm_clk_get(&pdev->dev, "can_clk");
if (IS_ERR(priv->can_clk)) {
- if (PTR_ERR(priv->can_clk) != -EPROBE_DEFER)
- dev_err(&pdev->dev, "Device clock not found.\n");
- ret = PTR_ERR(priv->can_clk);
+ ret = dev_err_probe(&pdev->dev, PTR_ERR(priv->can_clk),
+ "device clock not found\n");
goto err_free;
}
priv->bus_clk = devm_clk_get(&pdev->dev, devtype->bus_clk_name);
if (IS_ERR(priv->bus_clk)) {
- if (PTR_ERR(priv->bus_clk) != -EPROBE_DEFER)
- dev_err(&pdev->dev, "bus clock not found\n");
- ret = PTR_ERR(priv->bus_clk);
+ ret = dev_err_probe(&pdev->dev, PTR_ERR(priv->bus_clk),
+ "bus clock not found\n");
goto err_free;
}
--
2.30.0
On 04.02.2021 13:42:48, Michal Simek wrote:
> Use already prepared dev_err_probe() introduced by commit a787e5400a1c
> ("driver core: add device probe log helper").
> It simplifies EPROBE_DEFER handling.
>
> Also unify message format for similar error cases.
>
> Signed-off-by: Michal Simek <[email protected]>
Applied to linux-can-next/testing.
Thanks,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |