These touchscreen ICs support SPI, I2C and I3C interface, up to
10 finger touch, stylus and gestures events.
This initial driver is derived from the Goodix goodix_ts_berlin
available at [1] and [2] and only supports the GT9916 IC
present on the Qualcomm SM8550 MTP & QRD touch panel.
The current implementation only supports BerlinD, aka GT9916.
Support for advanced features like:
- Firmware & config update
- Stylus events
- Gestures events
- Previous revisions support (BerlinA or BerlinB)
is not included in current version.
The current support will work with currently flashed firmware
and config, and bail out if firmware or config aren't flashed yet.
[1] https://github.com/goodix/goodix_ts_berlin
[2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers
Signed-off-by: Neil Armstrong <[email protected]>
---
Changes in v9:
- Rebased on next-20231020
- Link to v8: https://lore.kernel.org/r/20231003-topic-goodix-berlin-upstream-initial-v8-0-171606102ed6@linaro.org
Changes in v8:
- Add missing bitfield.h include in core
- Link to v7: https://lore.kernel.org/r/20231002-topic-goodix-berlin-upstream-initial-v7-0-792fb91f5e88@linaro.org
Changes in v7:
- rebased on v6.6-rc3
- Link to v6: https://lore.kernel.org/r/20230912-topic-goodix-berlin-upstream-initial-v6-0-b4ecfa49fb9d@linaro.org
Changes in v6:
- rebased on v6.6-rc1
- changed commit message prefix to match the other Input commits
- Link to v5: https://lore.kernel.org/r/20230801-topic-goodix-berlin-upstream-initial-v5-0-079252935593@linaro.org
Changes in v5:
- rebased on next-20230801
- Link to v4: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v4-0-0947c489be17@linaro.org
Changes in v4:
- Core updates:
- drop kconfig depends, deps will be handled by _SPI and _I2C
- change power_on() error labels
- print errors on all dev_err() prints
- remove useless default variable initialization
- switch irq touch checksum error to dev_err()
- add Jeff's review tag
- I2C changes
- change REGMAP_I2C Kconfig from depends to select
- add Jeff's review tag
- SPI changes
- add select REGMAP to Kconfig
- added GOODIX_BERLIN_ prefix to defines
- switched from ret to error
- add Jeff's review tag
- Link to v3: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v3-0-f0577cead709@linaro.org
Changes in v3:
- Another guge cleanups after Jeff's review:
- appended goodix_berlin_ before all defines
- removed some unused defines
- removed retries on most of read functions, can be added back later
- added __le to ic_info structures
- reworked and simplified irq handling, dropped enum and ts_event structs
- added struct for touch data
- simplified and cleaned goodix_berlin_check_checksum & goodix_berlin_is_dummy_data
- moved touch_data_addr to the end of the main code_data
- reworked probe to get_irq last and right before setip input device
- cleaned probe by removing the "cd->dev"
- added short paragraph to justify new driver for berlin devices
- defined all offsets & masks
- Added bindings review tag
- Link to v2: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v2-0-26bc8fe1e90e@linaro.org
Changes in v2:
- Huge cleanups after Jeff's review:
- switch to error instead of ret
- drop dummy vendor/product ids
- drop unused defined/enums
- drop unused ic_info and only keep needes values
- cleanup namings and use goodix_berlin_ everywhere
- fix regulator setup
- fix default variables value when assigned afterwars
- removed indirections
- dropped debugfs
- cleaned input_dev setup
- dropped _remove()
- sync'ed i2c and spi drivers
- fixed yaml bindings
- Link to v1: https://lore.kernel.org/r/20230606-topic-goodix-berlin-upstream-initial-v1-0-4a0741b8aefd@linaro.org
---
Neil Armstrong (4):
dt-bindings: input: document Goodix Berlin Touchscreen IC
Input: add core support for Goodix Berlin Touchscreen IC
Input: goodix-berlin - add I2C support for Goodix Berlin Touchscreen IC
Input: goodix-berlin - add SPI support for Goodix Berlin Touchscreen IC
.../bindings/input/touchscreen/goodix,gt9916.yaml | 95 ++++
drivers/input/touchscreen/Kconfig | 31 ++
drivers/input/touchscreen/Makefile | 3 +
drivers/input/touchscreen/goodix_berlin.h | 159 ++++++
drivers/input/touchscreen/goodix_berlin_core.c | 582 +++++++++++++++++++++
drivers/input/touchscreen/goodix_berlin_i2c.c | 69 +++
drivers/input/touchscreen/goodix_berlin_spi.c | 173 ++++++
7 files changed, 1112 insertions(+)
---
base-commit: 2030579113a1b1b5bfd7ff24c0852847836d8fd1
change-id: 20230606-topic-goodix-berlin-upstream-initial-ba97e8ec8f4c
Best regards,
--
Neil Armstrong <[email protected]>
Add initial support for the new Goodix "Berlin" touchscreen ICs
over the I2C interface.
This initial driver is derived from the Goodix goodix_ts_berlin
available at [1] and [2] and only supports the GT9916 IC
present on the Qualcomm SM8550 MTP & QRD touch panel.
The current implementation only supports BerlinD, aka GT9916.
[1] https://github.com/goodix/goodix_ts_berlin
[2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers
Reviewed-by: Jeff LaBundy <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
---
drivers/input/touchscreen/Kconfig | 14 ++++++
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/goodix_berlin_i2c.c | 69 +++++++++++++++++++++++++++
3 files changed, 84 insertions(+)
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 950da599ae1a..cc7b88118158 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -419,6 +419,20 @@ config TOUCHSCREEN_GOODIX
config TOUCHSCREEN_GOODIX_BERLIN_CORE
tristate
+config TOUCHSCREEN_GOODIX_BERLIN_I2C
+ tristate "Goodix Berlin I2C touchscreen"
+ depends on I2C
+ select REGMAP_I2C
+ select TOUCHSCREEN_GOODIX_BERLIN_CORE
+ help
+ Say Y here if you have a Goodix Berlin IC connected to
+ your system via I2C.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called goodix_berlin_i2c.
+
config TOUCHSCREEN_HIDEEP
tristate "HiDeep Touch IC"
depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 2e2f3e70cd2c..7ef677cf7a10 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o
+obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C) += goodix_berlin_i2c.o
obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
diff --git a/drivers/input/touchscreen/goodix_berlin_i2c.c b/drivers/input/touchscreen/goodix_berlin_i2c.c
new file mode 100644
index 000000000000..6407b2258eb1
--- /dev/null
+++ b/drivers/input/touchscreen/goodix_berlin_i2c.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Goodix Berlin Touchscreen Driver
+ *
+ * Copyright (C) 2020 - 2021 Goodix, Inc.
+ * Copyright (C) 2023 Linaro Ltd.
+ *
+ * Based on goodix_ts_berlin driver.
+ */
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "goodix_berlin.h"
+
+#define I2C_MAX_TRANSFER_SIZE 256
+
+static const struct regmap_config goodix_berlin_i2c_regmap_conf = {
+ .reg_bits = 32,
+ .val_bits = 8,
+ .max_raw_read = I2C_MAX_TRANSFER_SIZE,
+ .max_raw_write = I2C_MAX_TRANSFER_SIZE,
+};
+
+/* vendor & product left unassigned here, should probably be updated from fw info */
+static const struct input_id goodix_berlin_i2c_input_id = {
+ .bustype = BUS_I2C,
+};
+
+static int goodix_berlin_i2c_probe(struct i2c_client *client)
+{
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i2c(client, &goodix_berlin_i2c_regmap_conf);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ return goodix_berlin_probe(&client->dev, client->irq,
+ &goodix_berlin_i2c_input_id, regmap);
+}
+
+static const struct i2c_device_id goodix_berlin_i2c_id[] = {
+ { "gt9916", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, goodix_berlin_i2c_id);
+
+static const struct of_device_id goodix_berlin_i2c_of_match[] = {
+ { .compatible = "goodix,gt9916", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, goodix_berlin_i2c_of_match);
+
+static struct i2c_driver goodix_berlin_i2c_driver = {
+ .driver = {
+ .name = "goodix-berlin-i2c",
+ .of_match_table = goodix_berlin_i2c_of_match,
+ .pm = pm_sleep_ptr(&goodix_berlin_pm_ops),
+ },
+ .probe = goodix_berlin_i2c_probe,
+ .id_table = goodix_berlin_i2c_id,
+};
+module_i2c_driver(goodix_berlin_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Goodix Berlin I2C Touchscreen driver");
+MODULE_AUTHOR("Neil Armstrong <[email protected]>");
--
2.34.1
Add initial support for the new Goodix "Berlin" touchscreen ICs
over the SPI interface.
The driver doesn't use the regmap_spi code since the SPI messages
needs to be prefixed, thus this custom regmap code.
This initial driver is derived from the Goodix goodix_ts_berlin
available at [1] and [2] and only supports the GT9916 IC
present on the Qualcomm SM8550 MTP & QRD touch panel.
The current implementation only supports BerlinD, aka GT9916.
[1] https://github.com/goodix/goodix_ts_berlin
[2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers
Reviewed-by: Jeff LaBundy <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
---
drivers/input/touchscreen/Kconfig | 14 +++
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/goodix_berlin_spi.c | 173 ++++++++++++++++++++++++++
3 files changed, 188 insertions(+)
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index cc7b88118158..c821fe3ee794 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -433,6 +433,20 @@ config TOUCHSCREEN_GOODIX_BERLIN_I2C
To compile this driver as a module, choose M here: the
module will be called goodix_berlin_i2c.
+config TOUCHSCREEN_GOODIX_BERLIN_SPI
+ tristate "Goodix Berlin SPI touchscreen"
+ depends on SPI_MASTER
+ select REGMAP
+ select TOUCHSCREEN_GOODIX_BERLIN_CORE
+ help
+ Say Y here if you have a Goodix Berlin IC connected to
+ your system via SPI.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called goodix_berlin_spi.
+
config TOUCHSCREEN_HIDEEP
tristate "HiDeep Touch IC"
depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7ef677cf7a10..a81cb5aa21a5 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C) += goodix_berlin_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI) += goodix_berlin_spi.o
obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
diff --git a/drivers/input/touchscreen/goodix_berlin_spi.c b/drivers/input/touchscreen/goodix_berlin_spi.c
new file mode 100644
index 000000000000..1f57c3592918
--- /dev/null
+++ b/drivers/input/touchscreen/goodix_berlin_spi.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Goodix Berlin Touchscreen Driver
+ *
+ * Copyright (C) 2020 - 2021 Goodix, Inc.
+ * Copyright (C) 2023 Linaro Ltd.
+ *
+ * Based on goodix_ts_berlin driver.
+ */
+#include <asm/unaligned.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "goodix_berlin.h"
+
+#define GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN 1
+#define GOODIX_BERLIN_REGISTER_WIDTH 4
+#define GOODIX_BERLIN_SPI_READ_DUMMY_LEN 3
+#define GOODIX_BERLIN_SPI_READ_PREFIX_LEN (GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + \
+ GOODIX_BERLIN_REGISTER_WIDTH + \
+ GOODIX_BERLIN_SPI_READ_DUMMY_LEN)
+#define GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN (GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + \
+ GOODIX_BERLIN_REGISTER_WIDTH)
+
+#define GOODIX_BERLIN_SPI_WRITE_FLAG 0xF0
+#define GOODIX_BERLIN_SPI_READ_FLAG 0xF1
+
+static int goodix_berlin_spi_read(void *context, const void *reg_buf,
+ size_t reg_size, void *val_buf,
+ size_t val_size)
+{
+ struct spi_device *spi = context;
+ struct spi_transfer xfers;
+ struct spi_message spi_msg;
+ const u32 *reg = reg_buf; /* reg is stored as native u32 at start of buffer */
+ u8 *buf;
+ int error;
+
+ if (reg_size != GOODIX_BERLIN_REGISTER_WIDTH)
+ return -EINVAL;
+
+ buf = kzalloc(GOODIX_BERLIN_SPI_READ_PREFIX_LEN + val_size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ spi_message_init(&spi_msg);
+ memset(&xfers, 0, sizeof(xfers));
+
+ /* buffer format: 0xF1 + addr(4bytes) + dummy(3bytes) + data */
+ buf[0] = GOODIX_BERLIN_SPI_READ_FLAG;
+ put_unaligned_be32(*reg, buf + GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN);
+ memset(buf + GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + GOODIX_BERLIN_REGISTER_WIDTH,
+ 0xff, GOODIX_BERLIN_SPI_READ_DUMMY_LEN);
+
+ xfers.tx_buf = buf;
+ xfers.rx_buf = buf;
+ xfers.len = GOODIX_BERLIN_SPI_READ_PREFIX_LEN + val_size;
+ xfers.cs_change = 0;
+ spi_message_add_tail(&xfers, &spi_msg);
+
+ error = spi_sync(spi, &spi_msg);
+ if (error < 0)
+ dev_err(&spi->dev, "spi transfer error, %d", error);
+ else
+ memcpy(val_buf, buf + GOODIX_BERLIN_SPI_READ_PREFIX_LEN, val_size);
+
+ kfree(buf);
+ return error;
+}
+
+static int goodix_berlin_spi_write(void *context, const void *data,
+ size_t count)
+{
+ unsigned int len = count - GOODIX_BERLIN_REGISTER_WIDTH;
+ struct spi_device *spi = context;
+ struct spi_transfer xfers;
+ struct spi_message spi_msg;
+ const u32 *reg = data; /* reg is stored as native u32 at start of buffer */
+ u8 *buf;
+ int error;
+
+ buf = kzalloc(GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN + len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ spi_message_init(&spi_msg);
+ memset(&xfers, 0, sizeof(xfers));
+
+ buf[0] = GOODIX_BERLIN_SPI_WRITE_FLAG;
+ put_unaligned_be32(*reg, buf + GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN);
+ memcpy(buf + GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN,
+ data + GOODIX_BERLIN_REGISTER_WIDTH, len);
+
+ xfers.tx_buf = buf;
+ xfers.len = GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN + len;
+ xfers.cs_change = 0;
+ spi_message_add_tail(&xfers, &spi_msg);
+
+ error = spi_sync(spi, &spi_msg);
+ if (error < 0)
+ dev_err(&spi->dev, "spi transfer error, %d", error);
+
+ kfree(buf);
+ return error;
+}
+
+static const struct regmap_config goodix_berlin_spi_regmap_conf = {
+ .reg_bits = 32,
+ .val_bits = 8,
+ .read = goodix_berlin_spi_read,
+ .write = goodix_berlin_spi_write,
+};
+
+/* vendor & product left unassigned here, should probably be updated from fw info */
+static const struct input_id goodix_berlin_spi_input_id = {
+ .bustype = BUS_SPI,
+};
+
+static int goodix_berlin_spi_probe(struct spi_device *spi)
+{
+ struct regmap_config regmap_config;
+ struct regmap *regmap;
+ size_t max_size;
+ int error = 0;
+
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 8;
+ error = spi_setup(spi);
+ if (error)
+ return error;
+
+ max_size = spi_max_transfer_size(spi);
+
+ regmap_config = goodix_berlin_spi_regmap_conf;
+ regmap_config.max_raw_read = max_size - GOODIX_BERLIN_SPI_READ_PREFIX_LEN;
+ regmap_config.max_raw_write = max_size - GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN;
+
+ regmap = devm_regmap_init(&spi->dev, NULL, spi, ®map_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ return goodix_berlin_probe(&spi->dev, spi->irq,
+ &goodix_berlin_spi_input_id, regmap);
+}
+
+static const struct spi_device_id goodix_berlin_spi_ids[] = {
+ { "gt9916" },
+ { },
+};
+MODULE_DEVICE_TABLE(spi, goodix_berlin_spi_ids);
+
+static const struct of_device_id goodix_berlin_spi_of_match[] = {
+ { .compatible = "goodix,gt9916", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, goodix_berlin_spi_of_match);
+
+static struct spi_driver goodix_berlin_spi_driver = {
+ .driver = {
+ .name = "goodix-berlin-spi",
+ .of_match_table = goodix_berlin_spi_of_match,
+ .pm = pm_sleep_ptr(&goodix_berlin_pm_ops),
+ },
+ .probe = goodix_berlin_spi_probe,
+ .id_table = goodix_berlin_spi_ids,
+};
+module_spi_driver(goodix_berlin_spi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Goodix Berlin SPI Touchscreen driver");
+MODULE_AUTHOR("Neil Armstrong <[email protected]>");
--
2.34.1
Document the Goodix GT9916 wich is part of the "Berlin" serie
of Touchscreen controllers IC from Goodix.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
---
.../bindings/input/touchscreen/goodix,gt9916.yaml | 95 ++++++++++++++++++++++
1 file changed, 95 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
new file mode 100644
index 000000000000..d90f045ac06c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix Berlin series touchscreen controller
+
+description: The Goodix Berlin series of touchscreen controllers
+ be connected to either I2C or SPI buses.
+
+maintainers:
+ - Neil Armstrong <[email protected]>
+
+allOf:
+ - $ref: touchscreen.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - goodix,gt9916
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ avdd-supply:
+ description: Analog power supply regulator on AVDD pin
+
+ vddio-supply:
+ description: power supply regulator on VDDIO pin
+
+ spi-max-frequency: true
+ touchscreen-inverted-x: true
+ touchscreen-inverted-y: true
+ touchscreen-size-x: true
+ touchscreen-size-y: true
+ touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - avdd-supply
+ - touchscreen-size-x
+ - touchscreen-size-y
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ touchscreen@5d {
+ compatible = "goodix,gt9916";
+ reg = <0x5d>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ avdd-supply = <&ts_avdd>;
+ touchscreen-size-x = <1024>;
+ touchscreen-size-y = <768>;
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-cs = <1>;
+ cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ touchscreen@0 {
+ compatible = "goodix,gt9916";
+ reg = <0>;
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ avdd-supply = <&ts_avdd>;
+ spi-max-frequency = <1000000>;
+ touchscreen-size-x = <1024>;
+ touchscreen-size-y = <768>;
+ };
+ };
+
+...
--
2.34.1
Add initial support for the new Goodix "Berlin" touchscreen ICs.
These touchscreen ICs support SPI, I2C and I3C interface, up to
10 finger touch, stylus and gestures events.
This initial driver is derived from the Goodix goodix_ts_berlin
available at [1] and [2] and only supports the GT9916 IC
present on the Qualcomm SM8550 MTP & QRD touch panel.
The current implementation only supports BerlinD, aka GT9916.
Support for advanced features like:
- Firmware & config update
- Stylus events
- Gestures events
- Previous revisions support (BerlinA or BerlinB)
is not included in current version.
The current support will work with currently flashed firmware
and config, and bail out if firmware or config aren't flashed yet.
[1] https://github.com/goodix/goodix_ts_berlin
[2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers
Reviewed-by: Jeff LaBundy <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
---
drivers/input/touchscreen/Kconfig | 3 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/goodix_berlin.h | 159 +++++++
drivers/input/touchscreen/goodix_berlin_core.c | 582 +++++++++++++++++++++++++
4 files changed, 745 insertions(+)
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index e3e2324547b9..950da599ae1a 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -416,6 +416,9 @@ config TOUCHSCREEN_GOODIX
To compile this driver as a module, choose M here: the
module will be called goodix.
+config TOUCHSCREEN_GOODIX_BERLIN_CORE
+ tristate
+
config TOUCHSCREEN_HIDEEP
tristate "HiDeep Touch IC"
depends on I2C
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 62bd24f3ac8e..2e2f3e70cd2c 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o
obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o
+obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o
obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o
obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o
diff --git a/drivers/input/touchscreen/goodix_berlin.h b/drivers/input/touchscreen/goodix_berlin.h
new file mode 100644
index 000000000000..235f44947a28
--- /dev/null
+++ b/drivers/input/touchscreen/goodix_berlin.h
@@ -0,0 +1,159 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Goodix Touchscreen Driver
+ * Copyright (C) 2020 - 2021 Goodix, Inc.
+ * Copyright (C) 2023 Linaro Ltd.
+ *
+ * Based on goodix_berlin_berlin driver.
+ */
+
+#ifndef __GOODIX_BERLIN_H_
+#define __GOODIX_BERLIN_H_
+
+#include <linux/gpio/consumer.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sizes.h>
+
+#define GOODIX_BERLIN_MAX_TOUCH 10
+
+#define GOODIX_BERLIN_NORMAL_RESET_DELAY_MS 100
+
+#define GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN 8
+#define GOODIX_BERLIN_STATUS_OFFSET 0
+#define GOODIX_BERLIN_REQUEST_TYPE_OFFSET 2
+
+#define GOODIX_BERLIN_BYTES_PER_POINT 8
+#define GOODIX_BERLIN_COOR_DATA_CHECKSUM_SIZE 2
+#define GOODIX_BERLIN_COOR_DATA_CHECKSUM_MASK GENMASK(15, 0)
+
+/* Read n finger events */
+#define GOODIX_BERLIN_IRQ_READ_LEN(n) (GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN + \
+ (GOODIX_BERLIN_BYTES_PER_POINT * (n)) + \
+ GOODIX_BERLIN_COOR_DATA_CHECKSUM_SIZE)
+
+#define GOODIX_BERLIN_TOUCH_EVENT BIT(7)
+#define GOODIX_BERLIN_REQUEST_EVENT BIT(6)
+#define GOODIX_BERLIN_TOUCH_COUNT_MASK GENMASK(3, 0)
+
+#define GOODIX_BERLIN_REQUEST_CODE_RESET 3
+
+#define GOODIX_BERLIN_POINT_TYPE_MASK GENMASK(3, 0)
+#define GOODIX_BERLIN_POINT_TYPE_STYLUS_HOVER 1
+#define GOODIX_BERLIN_POINT_TYPE_STYLUS 3
+
+#define GOODIX_BERLIN_TOUCH_ID_MASK GENMASK(7, 4)
+
+#define GOODIX_BERLIN_DEV_CONFIRM_VAL 0xAA
+#define GOODIX_BERLIN_BOOTOPTION_ADDR 0x10000
+#define GOODIX_BERLIN_FW_VERSION_INFO_ADDR 0x10014
+
+#define GOODIX_BERLIN_IC_INFO_MAX_LEN SZ_1K
+#define GOODIX_BERLIN_IC_INFO_ADDR 0x10070
+
+struct goodix_berlin_fw_version {
+ u8 rom_pid[6];
+ u8 rom_vid[3];
+ u8 rom_vid_reserved;
+ u8 patch_pid[8];
+ u8 patch_vid[4];
+ u8 patch_vid_reserved;
+ u8 sensor_id;
+ u8 reserved[2];
+ __le16 checksum;
+} __packed;
+
+struct goodix_berlin_ic_info_version {
+ u8 info_customer_id;
+ u8 info_version_id;
+ u8 ic_die_id;
+ u8 ic_version_id;
+ __le32 config_id;
+ u8 config_version;
+ u8 frame_data_customer_id;
+ u8 frame_data_version_id;
+ u8 touch_data_customer_id;
+ u8 touch_data_version_id;
+ u8 reserved[3];
+} __packed;
+
+struct goodix_berlin_ic_info_feature {
+ __le16 freqhop_feature;
+ __le16 calibration_feature;
+ __le16 gesture_feature;
+ __le16 side_touch_feature;
+ __le16 stylus_feature;
+} __packed;
+
+struct goodix_berlin_ic_info_misc {
+ __le32 cmd_addr;
+ __le16 cmd_max_len;
+ __le32 cmd_reply_addr;
+ __le16 cmd_reply_len;
+ __le32 fw_state_addr;
+ __le16 fw_state_len;
+ __le32 fw_buffer_addr;
+ __le16 fw_buffer_max_len;
+ __le32 frame_data_addr;
+ __le16 frame_data_head_len;
+ __le16 fw_attr_len;
+ __le16 fw_log_len;
+ u8 pack_max_num;
+ u8 pack_compress_version;
+ __le16 stylus_struct_len;
+ __le16 mutual_struct_len;
+ __le16 self_struct_len;
+ __le16 noise_struct_len;
+ __le32 touch_data_addr;
+ __le16 touch_data_head_len;
+ __le16 point_struct_len;
+ __le16 reserved1;
+ __le16 reserved2;
+ __le32 mutual_rawdata_addr;
+ __le32 mutual_diffdata_addr;
+ __le32 mutual_refdata_addr;
+ __le32 self_rawdata_addr;
+ __le32 self_diffdata_addr;
+ __le32 self_refdata_addr;
+ __le32 iq_rawdata_addr;
+ __le32 iq_refdata_addr;
+ __le32 im_rawdata_addr;
+ __le16 im_readata_len;
+ __le32 noise_rawdata_addr;
+ __le16 noise_rawdata_len;
+ __le32 stylus_rawdata_addr;
+ __le16 stylus_rawdata_len;
+ __le32 noise_data_addr;
+ __le32 esd_addr;
+} __packed;
+
+struct goodix_berlin_touch_data {
+ u8 id;
+ u8 unused;
+ __le16 x;
+ __le16 y;
+ __le16 w;
+} __packed;
+
+struct goodix_berlin_core {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regulator *avdd;
+ struct regulator *iovdd;
+ struct gpio_desc *reset_gpio;
+ struct touchscreen_properties props;
+ struct goodix_berlin_fw_version fw_version;
+ struct input_dev *input_dev;
+ int irq;
+
+ /* Runtime parameters extracted from IC_INFO buffer */
+ u32 touch_data_addr;
+};
+
+int goodix_berlin_probe(struct device *dev, int irq, const struct input_id *id,
+ struct regmap *regmap);
+
+extern const struct dev_pm_ops goodix_berlin_pm_ops;
+
+#endif
diff --git a/drivers/input/touchscreen/goodix_berlin_core.c b/drivers/input/touchscreen/goodix_berlin_core.c
new file mode 100644
index 000000000000..caf364b8c223
--- /dev/null
+++ b/drivers/input/touchscreen/goodix_berlin_core.c
@@ -0,0 +1,582 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Goodix Touchscreen Driver
+ * Copyright (C) 2020 - 2021 Goodix, Inc.
+ * Copyright (C) 2023 Linaro Ltd.
+ *
+ * Based on goodix_ts_berlin driver.
+ */
+#include <asm/unaligned.h>
+#include <linux/bitfield.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/regmap.h>
+
+#include "goodix_berlin.h"
+
+/*
+ * Goodix "Berlin" Touchscreen ID driver
+ *
+ * This driver is distinct from goodix.c since hardware interface
+ * is different enough to require a new driver.
+ * None of the register address or data structure are close enough
+ * to the previous generations.
+ *
+ * Currently only handles Multitouch events with already
+ * programmed firmware and "config" for "Revision D" Berlin IC.
+ *
+ * Support is missing for:
+ * - ESD Management
+ * - Firmware update/flashing
+ * - "Config" update/flashing
+ * - Stylus Events
+ * - Gesture Events
+ * - Support for older revisions (A & B)
+ */
+
+static bool goodix_berlin_checksum_valid(const u8 *data, int size)
+{
+ u32 cal_checksum = 0;
+ u16 r_checksum;
+ u32 i;
+
+ if (size < GOODIX_BERLIN_COOR_DATA_CHECKSUM_SIZE)
+ return false;
+
+ for (i = 0; i < size - GOODIX_BERLIN_COOR_DATA_CHECKSUM_SIZE; i++)
+ cal_checksum += data[i];
+
+ r_checksum = get_unaligned_le16(&data[i]);
+
+ return FIELD_GET(GOODIX_BERLIN_COOR_DATA_CHECKSUM_MASK, cal_checksum) == r_checksum;
+}
+
+static bool goodix_berlin_is_dummy_data(struct goodix_berlin_core *cd,
+ const u8 *data, int size)
+{
+ int i;
+
+ /*
+ * If the device is missing or doesn't respond the buffer
+ * could be filled with bus default line state, 0x00 or 0xff,
+ * so declare success the first time we encounter neither.
+ */
+ for (i = 0; i < size; i++)
+ if (data[i] > 0 && data[i] < 0xff)
+ return false;
+
+ return true;
+}
+
+static int goodix_berlin_dev_confirm(struct goodix_berlin_core *cd)
+{
+ u8 tx_buf[8], rx_buf[8];
+ int retry = 3;
+ int error;
+
+ memset(tx_buf, GOODIX_BERLIN_DEV_CONFIRM_VAL, sizeof(tx_buf));
+ while (retry--) {
+ error = regmap_raw_write(cd->regmap, GOODIX_BERLIN_BOOTOPTION_ADDR, tx_buf,
+ sizeof(tx_buf));
+ if (error)
+ return error;
+
+ error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_BOOTOPTION_ADDR, rx_buf,
+ sizeof(rx_buf));
+ if (error)
+ return error;
+
+ if (!memcmp(tx_buf, rx_buf, sizeof(tx_buf)))
+ return 0;
+
+ usleep_range(5000, 5100);
+ }
+
+ dev_err(cd->dev, "device confirm failed, rx_buf: %*ph\n", 8, rx_buf);
+
+ return -EINVAL;
+}
+
+static int goodix_berlin_power_on(struct goodix_berlin_core *cd, bool on)
+{
+ int error = 0;
+
+ if (on) {
+ error = regulator_enable(cd->iovdd);
+ if (error) {
+ dev_err(cd->dev, "Failed to enable iovdd: %d\n", error);
+ return error;
+ }
+
+ /* Vendor waits 3ms for IOVDD to settle */
+ usleep_range(3000, 3100);
+
+ error = regulator_enable(cd->avdd);
+ if (error) {
+ dev_err(cd->dev, "Failed to enable avdd: %d\n", error);
+ goto err_iovdd_disable;
+ }
+
+ /* Vendor waits 15ms for IOVDD to settle */
+ usleep_range(15000, 15100);
+
+ gpiod_set_value(cd->reset_gpio, 0);
+
+ /* Vendor waits 4ms for Firmware to initialize */
+ usleep_range(4000, 4100);
+
+ error = goodix_berlin_dev_confirm(cd);
+ if (error)
+ goto err_dev_reset;
+
+ /* Vendor waits 100ms for Firmware to fully boot */
+ msleep(GOODIX_BERLIN_NORMAL_RESET_DELAY_MS);
+
+ return 0;
+ }
+
+err_dev_reset:
+ gpiod_set_value(cd->reset_gpio, 1);
+
+ regulator_disable(cd->avdd);
+
+err_iovdd_disable:
+ regulator_disable(cd->iovdd);
+
+ return error;
+}
+
+static int goodix_berlin_read_version(struct goodix_berlin_core *cd)
+{
+ u8 buf[sizeof(struct goodix_berlin_fw_version)];
+ int error;
+
+ error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_FW_VERSION_INFO_ADDR, buf, sizeof(buf));
+ if (error) {
+ dev_err(cd->dev, "error reading fw version, %d\n", error);
+ return error;
+ }
+
+ if (!goodix_berlin_checksum_valid(buf, sizeof(buf))) {
+ dev_err(cd->dev, "invalid fw version: checksum error\n");
+ return -EINVAL;
+ }
+
+ memcpy(&cd->fw_version, buf, sizeof(cd->fw_version));
+
+ return 0;
+}
+
+/* Only extract necessary data for runtime */
+static int goodix_berlin_convert_ic_info(struct goodix_berlin_core *cd,
+ const u8 *data, u16 length)
+{
+ struct goodix_berlin_ic_info_misc misc;
+ unsigned int offset = 0;
+ u8 param_num;
+
+ offset += sizeof(__le16); /* length */
+ offset += sizeof(struct goodix_berlin_ic_info_version);
+ offset += sizeof(struct goodix_berlin_ic_info_feature);
+
+ /* IC_INFO Parameters, variable width structure */
+ offset += 4 * sizeof(u8); /* drv_num, sen_num, button_num, force_num */
+
+ if (offset >= length)
+ goto invalid_offset;
+
+ param_num = data[offset++]; /* active_scan_rate_num */
+
+ offset += param_num * sizeof(__le16);
+
+ if (offset >= length)
+ goto invalid_offset;
+
+ param_num = data[offset++]; /* mutual_freq_num*/
+
+ offset += param_num * sizeof(__le16);
+
+ if (offset >= length)
+ goto invalid_offset;
+
+ param_num = data[offset++]; /* self_tx_freq_num */
+
+ offset += param_num * sizeof(__le16);
+
+ if (offset >= length)
+ goto invalid_offset;
+
+ param_num = data[offset++]; /* self_rx_freq_num */
+
+ offset += param_num * sizeof(__le16);
+
+ if (offset >= length)
+ goto invalid_offset;
+
+ param_num = data[offset++]; /* stylus_freq_num */
+
+ offset += param_num * sizeof(__le16);
+
+ if (offset + sizeof(misc) > length)
+ goto invalid_offset;
+
+ /* goodix_berlin_ic_info_misc */
+ memcpy(&misc, &data[offset], sizeof(misc));
+
+ cd->touch_data_addr = le32_to_cpu(misc.touch_data_addr);
+
+ return 0;
+
+invalid_offset:
+ dev_err(cd->dev, "ic_info length is invalid (offset %d length %d)\n",
+ offset, length);
+ return -EINVAL;
+}
+
+static int goodix_berlin_get_ic_info(struct goodix_berlin_core *cd)
+{
+ u8 afe_data[GOODIX_BERLIN_IC_INFO_MAX_LEN];
+ __le16 length_raw;
+ u16 length;
+ int error;
+
+ error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR,
+ &length_raw, sizeof(length_raw));
+ if (error) {
+ dev_info(cd->dev, "failed get ic info length, %d\n", error);
+ return error;
+ }
+
+ length = le16_to_cpu(length_raw);
+ if (length >= GOODIX_BERLIN_IC_INFO_MAX_LEN) {
+ dev_info(cd->dev, "invalid ic info length %d\n", length);
+ return -EINVAL;
+ }
+
+ error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR,
+ afe_data, length);
+ if (error) {
+ dev_info(cd->dev, "failed get ic info data, %d\n", error);
+ return error;
+ }
+
+ /* check whether the data is valid (ex. bus default values) */
+ if (goodix_berlin_is_dummy_data(cd, (const uint8_t *)afe_data, length)) {
+ dev_err(cd->dev, "fw info data invalid\n");
+ return -EINVAL;
+ }
+
+ if (!goodix_berlin_checksum_valid((const uint8_t *)afe_data, length)) {
+ dev_info(cd->dev, "fw info checksum error\n");
+ return -EINVAL;
+ }
+
+ error = goodix_berlin_convert_ic_info(cd, afe_data, length);
+ if (error)
+ return error;
+
+ /* check some key info */
+ if (!cd->touch_data_addr) {
+ dev_err(cd->dev, "touch_data_addr is null\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void goodix_berlin_parse_finger(struct goodix_berlin_core *cd,
+ const void *buf, int touch_num)
+{
+ const struct goodix_berlin_touch_data *touch_data = buf;
+ int i;
+
+ /* Check for data validity */
+ for (i = 0; i < touch_num; i++) {
+ unsigned int id;
+
+ id = FIELD_GET(GOODIX_BERLIN_TOUCH_ID_MASK, touch_data[i].id);
+
+ if (id >= GOODIX_BERLIN_MAX_TOUCH) {
+ dev_warn(cd->dev, "invalid finger id %d\n", id);
+ return;
+ }
+ }
+
+ /* Report finger touches */
+ for (i = 0; i < touch_num; i++) {
+ input_mt_slot(cd->input_dev,
+ FIELD_GET(GOODIX_BERLIN_TOUCH_ID_MASK,
+ touch_data[i].id));
+ input_mt_report_slot_state(cd->input_dev, MT_TOOL_FINGER, true);
+
+ touchscreen_report_pos(cd->input_dev, &cd->props,
+ __le16_to_cpu(touch_data[i].x),
+ __le16_to_cpu(touch_data[i].y),
+ true);
+ input_report_abs(cd->input_dev, ABS_MT_TOUCH_MAJOR,
+ __le16_to_cpu(touch_data[i].w));
+ }
+
+ input_mt_sync_frame(cd->input_dev);
+ input_sync(cd->input_dev);
+}
+
+static void goodix_berlin_touch_handler(struct goodix_berlin_core *cd,
+ const void *pre_buf, u32 pre_buf_len)
+{
+ static u8 buffer[GOODIX_BERLIN_IRQ_READ_LEN(GOODIX_BERLIN_MAX_TOUCH)];
+ u8 point_type, touch_num;
+ int error;
+
+ /* copy pre-data to buffer */
+ memcpy(buffer, pre_buf, pre_buf_len);
+
+ touch_num = FIELD_GET(GOODIX_BERLIN_TOUCH_COUNT_MASK,
+ buffer[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]);
+
+ if (touch_num > GOODIX_BERLIN_MAX_TOUCH) {
+ dev_warn(cd->dev, "invalid touch num %d\n", touch_num);
+ return;
+ }
+
+ if (touch_num) {
+ /* read more data if more than 2 touch events */
+ if (unlikely(touch_num > 2)) {
+ error = regmap_raw_read(cd->regmap,
+ cd->touch_data_addr + pre_buf_len,
+ &buffer[pre_buf_len],
+ (touch_num - 2) * GOODIX_BERLIN_BYTES_PER_POINT);
+ if (error) {
+ dev_err_ratelimited(cd->dev, "failed to get touch data, %d\n",
+ error);
+ return;
+ }
+ }
+
+ point_type = FIELD_GET(GOODIX_BERLIN_POINT_TYPE_MASK,
+ buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN]);
+
+ if (point_type == GOODIX_BERLIN_POINT_TYPE_STYLUS ||
+ point_type == GOODIX_BERLIN_POINT_TYPE_STYLUS_HOVER) {
+ dev_warn_once(cd->dev, "Stylus event type not handled\n");
+ return;
+ }
+
+ if (!goodix_berlin_checksum_valid(&buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN],
+ touch_num * GOODIX_BERLIN_BYTES_PER_POINT + 2)) {
+ dev_err(cd->dev, "touch data checksum error, data: %*ph\n",
+ touch_num * GOODIX_BERLIN_BYTES_PER_POINT + 2,
+ &buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN]);
+ return;
+ }
+ }
+
+ goodix_berlin_parse_finger(cd, &buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN],
+ touch_num);
+}
+
+static int goodix_berlin_request_handle_reset(struct goodix_berlin_core *cd)
+{
+ gpiod_set_value(cd->reset_gpio, 1);
+ usleep_range(2000, 2100);
+ gpiod_set_value(cd->reset_gpio, 0);
+
+ msleep(GOODIX_BERLIN_NORMAL_RESET_DELAY_MS);
+
+ return 0;
+}
+
+static irqreturn_t goodix_berlin_threadirq_func(int irq, void *data)
+{
+ struct goodix_berlin_core *cd = data;
+ u8 buf[GOODIX_BERLIN_IRQ_READ_LEN(2)];
+ u8 event_status;
+ int error;
+
+ /* First, read buffer with space for 2 touch events */
+ error = regmap_raw_read(cd->regmap, cd->touch_data_addr, buf,
+ GOODIX_BERLIN_IRQ_READ_LEN(2));
+ if (error) {
+ dev_err_ratelimited(cd->dev, "failed get event head data, %d\n", error);
+ return IRQ_HANDLED;
+ }
+
+ if (buf[GOODIX_BERLIN_STATUS_OFFSET] == 0)
+ return IRQ_HANDLED;
+
+ if (!goodix_berlin_checksum_valid(buf, GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN)) {
+ dev_warn_ratelimited(cd->dev, "touch head checksum err : %*ph\n",
+ GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN, buf);
+ return IRQ_HANDLED;
+ }
+
+ event_status = buf[GOODIX_BERLIN_STATUS_OFFSET];
+
+ if (event_status & GOODIX_BERLIN_TOUCH_EVENT)
+ goodix_berlin_touch_handler(cd, buf, GOODIX_BERLIN_IRQ_READ_LEN(2));
+
+ if (event_status & GOODIX_BERLIN_REQUEST_EVENT) {
+ switch (buf[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]) {
+ case GOODIX_BERLIN_REQUEST_CODE_RESET:
+ goodix_berlin_request_handle_reset(cd);
+ break;
+
+ default:
+ dev_warn(cd->dev, "unsupported request code 0x%x\n",
+ buf[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]);
+ }
+ }
+
+ /* Clear up status field */
+ regmap_write(cd->regmap, cd->touch_data_addr, 0);
+
+ return IRQ_HANDLED;
+}
+
+static int goodix_berlin_input_dev_config(struct goodix_berlin_core *cd,
+ const struct input_id *id)
+{
+ struct input_dev *input_dev;
+ int error;
+
+ input_dev = devm_input_allocate_device(cd->dev);
+ if (!input_dev)
+ return -ENOMEM;
+
+ cd->input_dev = input_dev;
+ input_set_drvdata(input_dev, cd);
+
+ input_dev->name = "Goodix Berlin Capacitive TouchScreen";
+ input_dev->phys = "input/ts";
+
+ input_dev->id = *id;
+
+ input_set_abs_params(cd->input_dev, ABS_MT_POSITION_X, 0, SZ_64K - 1, 0, 0);
+ input_set_abs_params(cd->input_dev, ABS_MT_POSITION_Y, 0, SZ_64K - 1, 0, 0);
+ input_set_abs_params(cd->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+ touchscreen_parse_properties(cd->input_dev, true, &cd->props);
+
+ error = input_mt_init_slots(cd->input_dev, GOODIX_BERLIN_MAX_TOUCH,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error)
+ return error;
+
+ return input_register_device(cd->input_dev);
+}
+
+static int goodix_berlin_pm_suspend(struct device *dev)
+{
+ struct goodix_berlin_core *cd = dev_get_drvdata(dev);
+
+ disable_irq(cd->irq);
+
+ return goodix_berlin_power_on(cd, false);
+}
+
+static int goodix_berlin_pm_resume(struct device *dev)
+{
+ struct goodix_berlin_core *cd = dev_get_drvdata(dev);
+ int error;
+
+ error = goodix_berlin_power_on(cd, true);
+ if (error)
+ return error;
+
+ enable_irq(cd->irq);
+
+ return 0;
+}
+
+EXPORT_GPL_SIMPLE_DEV_PM_OPS(goodix_berlin_pm_ops,
+ goodix_berlin_pm_suspend,
+ goodix_berlin_pm_resume);
+
+static void goodix_berlin_power_off(void *data)
+{
+ struct goodix_berlin_core *cd = data;
+
+ goodix_berlin_power_on(cd, false);
+}
+
+int goodix_berlin_probe(struct device *dev, int irq, const struct input_id *id,
+ struct regmap *regmap)
+{
+ struct goodix_berlin_core *cd;
+ int error;
+
+ if (irq <= 0) {
+ dev_err(dev, "Missing interrupt number\n");
+ return -EINVAL;
+ }
+
+ cd = devm_kzalloc(dev, sizeof(*cd), GFP_KERNEL);
+ if (!cd)
+ return -ENOMEM;
+
+ cd->dev = dev;
+ cd->regmap = regmap;
+ cd->irq = irq;
+
+ cd->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(cd->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(cd->reset_gpio),
+ "Failed to request reset gpio\n");
+
+ cd->avdd = devm_regulator_get(dev, "avdd");
+ if (IS_ERR(cd->avdd))
+ return dev_err_probe(dev, PTR_ERR(cd->avdd),
+ "Failed to request avdd regulator\n");
+
+ cd->iovdd = devm_regulator_get(dev, "iovdd");
+ if (IS_ERR(cd->iovdd))
+ return dev_err_probe(dev, PTR_ERR(cd->iovdd),
+ "Failed to request iovdd regulator\n");
+
+ error = goodix_berlin_power_on(cd, true);
+ if (error) {
+ dev_err(dev, "failed power on");
+ return error;
+ }
+
+ error = devm_add_action_or_reset(dev, goodix_berlin_power_off, cd);
+ if (error)
+ return error;
+
+ error = goodix_berlin_read_version(cd);
+ if (error) {
+ dev_err(dev, "failed to get version info");
+ return error;
+ }
+
+ error = goodix_berlin_get_ic_info(cd);
+ if (error) {
+ dev_err(dev, "invalid ic info, abort");
+ return error;
+ }
+
+ error = goodix_berlin_input_dev_config(cd, id);
+ if (error) {
+ dev_err(dev, "failed set input device");
+ return error;
+ }
+
+ error = devm_request_threaded_irq(dev, irq, NULL,
+ goodix_berlin_threadirq_func,
+ IRQF_ONESHOT, "goodix-berlin", cd);
+ if (error) {
+ dev_err(dev, "request threaded irq failed: %d\n", error);
+ return error;
+ }
+
+ dev_set_drvdata(dev, cd);
+
+ dev_dbg(dev, "Goodix Berlin %s Touchscreen Controller", cd->fw_version.patch_pid);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(goodix_berlin_probe);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Goodix Berlin Core Touchscreen driver");
+MODULE_AUTHOR("Neil Armstrong <[email protected]>");
--
2.34.1
Hi Neil,
kernel test robot noticed the following build warnings:
[auto build test WARNING on 2030579113a1b1b5bfd7ff24c0852847836d8fd1]
url: https://github.com/intel-lab-lkp/linux/commits/Neil-Armstrong/dt-bindings-input-document-Goodix-Berlin-Touchscreen-IC/20231021-191942
base: 2030579113a1b1b5bfd7ff24c0852847836d8fd1
patch link: https://lore.kernel.org/r/20231021-topic-goodix-berlin-upstream-initial-v9-3-13fb4e887156%40linaro.org
patch subject: [PATCH v9 3/4] Input: goodix-berlin - add I2C support for Goodix Berlin Touchscreen IC
config: sh-allyesconfig (https://download.01.org/0day-ci/archive/20231023/[email protected]/config)
compiler: sh4-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231023/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All warnings (new ones prefixed by >>):
drivers/input/touchscreen/goodix_berlin_core.c: In function 'goodix_berlin_get_ic_info':
>> drivers/input/touchscreen/goodix_berlin_core.c:285:1: warning: the frame size of 1148 bytes is larger than 1024 bytes [-Wframe-larger-than=]
285 | }
| ^
vim +285 drivers/input/touchscreen/goodix_berlin_core.c
7aae63b22cf7e9 Neil Armstrong 2023-10-21 235
7aae63b22cf7e9 Neil Armstrong 2023-10-21 236 static int goodix_berlin_get_ic_info(struct goodix_berlin_core *cd)
7aae63b22cf7e9 Neil Armstrong 2023-10-21 237 {
7aae63b22cf7e9 Neil Armstrong 2023-10-21 238 u8 afe_data[GOODIX_BERLIN_IC_INFO_MAX_LEN];
7aae63b22cf7e9 Neil Armstrong 2023-10-21 239 __le16 length_raw;
7aae63b22cf7e9 Neil Armstrong 2023-10-21 240 u16 length;
7aae63b22cf7e9 Neil Armstrong 2023-10-21 241 int error;
7aae63b22cf7e9 Neil Armstrong 2023-10-21 242
7aae63b22cf7e9 Neil Armstrong 2023-10-21 243 error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR,
7aae63b22cf7e9 Neil Armstrong 2023-10-21 244 &length_raw, sizeof(length_raw));
7aae63b22cf7e9 Neil Armstrong 2023-10-21 245 if (error) {
7aae63b22cf7e9 Neil Armstrong 2023-10-21 246 dev_info(cd->dev, "failed get ic info length, %d\n", error);
7aae63b22cf7e9 Neil Armstrong 2023-10-21 247 return error;
7aae63b22cf7e9 Neil Armstrong 2023-10-21 248 }
7aae63b22cf7e9 Neil Armstrong 2023-10-21 249
7aae63b22cf7e9 Neil Armstrong 2023-10-21 250 length = le16_to_cpu(length_raw);
7aae63b22cf7e9 Neil Armstrong 2023-10-21 251 if (length >= GOODIX_BERLIN_IC_INFO_MAX_LEN) {
7aae63b22cf7e9 Neil Armstrong 2023-10-21 252 dev_info(cd->dev, "invalid ic info length %d\n", length);
7aae63b22cf7e9 Neil Armstrong 2023-10-21 253 return -EINVAL;
7aae63b22cf7e9 Neil Armstrong 2023-10-21 254 }
7aae63b22cf7e9 Neil Armstrong 2023-10-21 255
7aae63b22cf7e9 Neil Armstrong 2023-10-21 256 error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR,
7aae63b22cf7e9 Neil Armstrong 2023-10-21 257 afe_data, length);
7aae63b22cf7e9 Neil Armstrong 2023-10-21 258 if (error) {
7aae63b22cf7e9 Neil Armstrong 2023-10-21 259 dev_info(cd->dev, "failed get ic info data, %d\n", error);
7aae63b22cf7e9 Neil Armstrong 2023-10-21 260 return error;
7aae63b22cf7e9 Neil Armstrong 2023-10-21 261 }
7aae63b22cf7e9 Neil Armstrong 2023-10-21 262
7aae63b22cf7e9 Neil Armstrong 2023-10-21 263 /* check whether the data is valid (ex. bus default values) */
7aae63b22cf7e9 Neil Armstrong 2023-10-21 264 if (goodix_berlin_is_dummy_data(cd, (const uint8_t *)afe_data, length)) {
7aae63b22cf7e9 Neil Armstrong 2023-10-21 265 dev_err(cd->dev, "fw info data invalid\n");
7aae63b22cf7e9 Neil Armstrong 2023-10-21 266 return -EINVAL;
7aae63b22cf7e9 Neil Armstrong 2023-10-21 267 }
7aae63b22cf7e9 Neil Armstrong 2023-10-21 268
7aae63b22cf7e9 Neil Armstrong 2023-10-21 269 if (!goodix_berlin_checksum_valid((const uint8_t *)afe_data, length)) {
7aae63b22cf7e9 Neil Armstrong 2023-10-21 270 dev_info(cd->dev, "fw info checksum error\n");
7aae63b22cf7e9 Neil Armstrong 2023-10-21 271 return -EINVAL;
7aae63b22cf7e9 Neil Armstrong 2023-10-21 272 }
7aae63b22cf7e9 Neil Armstrong 2023-10-21 273
7aae63b22cf7e9 Neil Armstrong 2023-10-21 274 error = goodix_berlin_convert_ic_info(cd, afe_data, length);
7aae63b22cf7e9 Neil Armstrong 2023-10-21 275 if (error)
7aae63b22cf7e9 Neil Armstrong 2023-10-21 276 return error;
7aae63b22cf7e9 Neil Armstrong 2023-10-21 277
7aae63b22cf7e9 Neil Armstrong 2023-10-21 278 /* check some key info */
7aae63b22cf7e9 Neil Armstrong 2023-10-21 279 if (!cd->touch_data_addr) {
7aae63b22cf7e9 Neil Armstrong 2023-10-21 280 dev_err(cd->dev, "touch_data_addr is null\n");
7aae63b22cf7e9 Neil Armstrong 2023-10-21 281 return -EINVAL;
7aae63b22cf7e9 Neil Armstrong 2023-10-21 282 }
7aae63b22cf7e9 Neil Armstrong 2023-10-21 283
7aae63b22cf7e9 Neil Armstrong 2023-10-21 284 return 0;
7aae63b22cf7e9 Neil Armstrong 2023-10-21 @285 }
7aae63b22cf7e9 Neil Armstrong 2023-10-21 286
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
Hi Neil,
On Sat, Oct 21, 2023 at 01:09:24PM +0200, Neil Armstrong wrote:
> +static int goodix_berlin_get_ic_info(struct goodix_berlin_core *cd)
> +{
> + u8 afe_data[GOODIX_BERLIN_IC_INFO_MAX_LEN];
You probably already saw the kernel test robot message, I think we
should allocate this buffer in the heap (and free it once its no longer
needed).
> + __le16 length_raw;
> + u16 length;
> + int error;
> +
> + error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR,
> + &length_raw, sizeof(length_raw));
> + if (error) {
> + dev_info(cd->dev, "failed get ic info length, %d\n", error);
> + return error;
> + }
> +
> + length = le16_to_cpu(length_raw);
> + if (length >= GOODIX_BERLIN_IC_INFO_MAX_LEN) {
> + dev_info(cd->dev, "invalid ic info length %d\n", length);
> + return -EINVAL;
> + }
> +
> + error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR,
> + afe_data, length);
> + if (error) {
> + dev_info(cd->dev, "failed get ic info data, %d\n", error);
> + return error;
> + }
> +
> + /* check whether the data is valid (ex. bus default values) */
> + if (goodix_berlin_is_dummy_data(cd, (const uint8_t *)afe_data, length)) {
This cast is not needed.
> + dev_err(cd->dev, "fw info data invalid\n");
> + return -EINVAL;
> + }
> +
> + if (!goodix_berlin_checksum_valid((const uint8_t *)afe_data, length)) {
This cast is not needed either.
> + dev_info(cd->dev, "fw info checksum error\n");
> + return -EINVAL;
> + }
> +
> + error = goodix_berlin_convert_ic_info(cd, afe_data, length);
> + if (error)
> + return error;
> +
> + /* check some key info */
> + if (!cd->touch_data_addr) {
> + dev_err(cd->dev, "touch_data_addr is null\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static void goodix_berlin_parse_finger(struct goodix_berlin_core *cd,
> + const void *buf, int touch_num)
> +{
> + const struct goodix_berlin_touch_data *touch_data = buf;
> + int i;
> +
> + /* Check for data validity */
> + for (i = 0; i < touch_num; i++) {
> + unsigned int id;
> +
> + id = FIELD_GET(GOODIX_BERLIN_TOUCH_ID_MASK, touch_data[i].id);
> +
> + if (id >= GOODIX_BERLIN_MAX_TOUCH) {
> + dev_warn(cd->dev, "invalid finger id %d\n", id);
> + return;
Is it important to abort entire packet if one if the slots has incorrect
data? Can we simply skip over these contacts?
> + }
> + }
> +
> + /* Report finger touches */
> + for (i = 0; i < touch_num; i++) {
> + input_mt_slot(cd->input_dev,
> + FIELD_GET(GOODIX_BERLIN_TOUCH_ID_MASK,
> + touch_data[i].id));
> + input_mt_report_slot_state(cd->input_dev, MT_TOOL_FINGER, true);
> +
> + touchscreen_report_pos(cd->input_dev, &cd->props,
> + __le16_to_cpu(touch_data[i].x),
> + __le16_to_cpu(touch_data[i].y),
> + true);
> + input_report_abs(cd->input_dev, ABS_MT_TOUCH_MAJOR,
> + __le16_to_cpu(touch_data[i].w));
> + }
> +
> + input_mt_sync_frame(cd->input_dev);
> + input_sync(cd->input_dev);
> +}
> +
> +static void goodix_berlin_touch_handler(struct goodix_berlin_core *cd,
> + const void *pre_buf, u32 pre_buf_len)
> +{
> + static u8 buffer[GOODIX_BERLIN_IRQ_READ_LEN(GOODIX_BERLIN_MAX_TOUCH)];
No, please no static data. The drivers should be ready to handle more
than one device on a system. If the buffer is large-ish put it into
goodix_berlin_core.
> + u8 point_type, touch_num;
> + int error;
> +
> + /* copy pre-data to buffer */
> + memcpy(buffer, pre_buf, pre_buf_len);
> +
> + touch_num = FIELD_GET(GOODIX_BERLIN_TOUCH_COUNT_MASK,
> + buffer[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]);
> +
> + if (touch_num > GOODIX_BERLIN_MAX_TOUCH) {
> + dev_warn(cd->dev, "invalid touch num %d\n", touch_num);
> + return;
> + }
> +
> + if (touch_num) {
> + /* read more data if more than 2 touch events */
> + if (unlikely(touch_num > 2)) {
> + error = regmap_raw_read(cd->regmap,
> + cd->touch_data_addr + pre_buf_len,
> + &buffer[pre_buf_len],
> + (touch_num - 2) * GOODIX_BERLIN_BYTES_PER_POINT);
> + if (error) {
> + dev_err_ratelimited(cd->dev, "failed to get touch data, %d\n",
> + error);
> + return;
> + }
> + }
> +
> + point_type = FIELD_GET(GOODIX_BERLIN_POINT_TYPE_MASK,
> + buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN]);
> +
> + if (point_type == GOODIX_BERLIN_POINT_TYPE_STYLUS ||
> + point_type == GOODIX_BERLIN_POINT_TYPE_STYLUS_HOVER) {
> + dev_warn_once(cd->dev, "Stylus event type not handled\n");
> + return;
> + }
> +
> + if (!goodix_berlin_checksum_valid(&buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN],
> + touch_num * GOODIX_BERLIN_BYTES_PER_POINT + 2)) {
> + dev_err(cd->dev, "touch data checksum error, data: %*ph\n",
> + touch_num * GOODIX_BERLIN_BYTES_PER_POINT + 2,
> + &buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN]);
> + return;
> + }
> + }
> +
> + goodix_berlin_parse_finger(cd, &buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN],
> + touch_num);
> +}
> +
> +static int goodix_berlin_request_handle_reset(struct goodix_berlin_core *cd)
> +{
> + gpiod_set_value(cd->reset_gpio, 1);
> + usleep_range(2000, 2100);
> + gpiod_set_value(cd->reset_gpio, 0);
> +
> + msleep(GOODIX_BERLIN_NORMAL_RESET_DELAY_MS);
The reset line handling is optional, we should skip waits if there is
no GPIO defined for the board.
> +
> + return 0;
> +}
> +
> +static irqreturn_t goodix_berlin_threadirq_func(int irq, void *data)
> +{
> + struct goodix_berlin_core *cd = data;
> + u8 buf[GOODIX_BERLIN_IRQ_READ_LEN(2)];
> + u8 event_status;
> + int error;
> +
> + /* First, read buffer with space for 2 touch events */
> + error = regmap_raw_read(cd->regmap, cd->touch_data_addr, buf,
> + GOODIX_BERLIN_IRQ_READ_LEN(2));
> + if (error) {
> + dev_err_ratelimited(cd->dev, "failed get event head data, %d\n", error);
> + return IRQ_HANDLED;
> + }
> +
> + if (buf[GOODIX_BERLIN_STATUS_OFFSET] == 0)
> + return IRQ_HANDLED;
> +
> + if (!goodix_berlin_checksum_valid(buf, GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN)) {
> + dev_warn_ratelimited(cd->dev, "touch head checksum err : %*ph\n",
> + GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN, buf);
> + return IRQ_HANDLED;
> + }
> +
> + event_status = buf[GOODIX_BERLIN_STATUS_OFFSET];
> +
> + if (event_status & GOODIX_BERLIN_TOUCH_EVENT)
> + goodix_berlin_touch_handler(cd, buf, GOODIX_BERLIN_IRQ_READ_LEN(2));
> +
> + if (event_status & GOODIX_BERLIN_REQUEST_EVENT) {
> + switch (buf[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]) {
> + case GOODIX_BERLIN_REQUEST_CODE_RESET:
> + goodix_berlin_request_handle_reset(cd);
> + break;
> +
> + default:
> + dev_warn(cd->dev, "unsupported request code 0x%x\n",
> + buf[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]);
> + }
> + }
> +
> + /* Clear up status field */
> + regmap_write(cd->regmap, cd->touch_data_addr, 0);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int goodix_berlin_input_dev_config(struct goodix_berlin_core *cd,
> + const struct input_id *id)
> +{
> + struct input_dev *input_dev;
> + int error;
> +
> + input_dev = devm_input_allocate_device(cd->dev);
> + if (!input_dev)
> + return -ENOMEM;
> +
> + cd->input_dev = input_dev;
> + input_set_drvdata(input_dev, cd);
> +
> + input_dev->name = "Goodix Berlin Capacitive TouchScreen";
> + input_dev->phys = "input/ts";
> +
> + input_dev->id = *id;
> +
> + input_set_abs_params(cd->input_dev, ABS_MT_POSITION_X, 0, SZ_64K - 1, 0, 0);
> + input_set_abs_params(cd->input_dev, ABS_MT_POSITION_Y, 0, SZ_64K - 1, 0, 0);
> + input_set_abs_params(cd->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
> +
> + touchscreen_parse_properties(cd->input_dev, true, &cd->props);
> +
> + error = input_mt_init_slots(cd->input_dev, GOODIX_BERLIN_MAX_TOUCH,
> + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
> + if (error)
> + return error;
> +
> + return input_register_device(cd->input_dev);
Please in functions with multiple possible failure paths use format
error = op(...);
if (error)
return error;
return 0;
Thanks.
--
Dmitry
Hi Dmitry,
On 23/10/2023 06:37, Dmitry Torokhov wrote:
> Hi Neil,
>
> On Sat, Oct 21, 2023 at 01:09:24PM +0200, Neil Armstrong wrote:
>> +static int goodix_berlin_get_ic_info(struct goodix_berlin_core *cd)
>> +{
>> + u8 afe_data[GOODIX_BERLIN_IC_INFO_MAX_LEN];
>
> You probably already saw the kernel test robot message, I think we
> should allocate this buffer in the heap (and free it once its no longer
> needed).
Indeed I haven't received it on 9 patch submitting, anyway moved it to head.
>
>> + __le16 length_raw;
>> + u16 length;
>> + int error;
>> +
>> + error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR,
>> + &length_raw, sizeof(length_raw));
>> + if (error) {
>> + dev_info(cd->dev, "failed get ic info length, %d\n", error);
>> + return error;
>> + }
>> +
>> + length = le16_to_cpu(length_raw);
>> + if (length >= GOODIX_BERLIN_IC_INFO_MAX_LEN) {
>> + dev_info(cd->dev, "invalid ic info length %d\n", length);
>> + return -EINVAL;
>> + }
>> +
>> + error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR,
>> + afe_data, length);
>> + if (error) {
>> + dev_info(cd->dev, "failed get ic info data, %d\n", error);
>> + return error;
>> + }
>> +
>> + /* check whether the data is valid (ex. bus default values) */
>> + if (goodix_berlin_is_dummy_data(cd, (const uint8_t *)afe_data, length)) {
>
> This cast is not needed.
>
>> + dev_err(cd->dev, "fw info data invalid\n");
>> + return -EINVAL;
>> + }
>> +
>> + if (!goodix_berlin_checksum_valid((const uint8_t *)afe_data, length)) {
>
> This cast is not needed either.
>
>> + dev_info(cd->dev, "fw info checksum error\n");
>> + return -EINVAL;
>> + }
>> +
>> + error = goodix_berlin_convert_ic_info(cd, afe_data, length);
>> + if (error)
>> + return error;
>> +
>> + /* check some key info */
>> + if (!cd->touch_data_addr) {
>> + dev_err(cd->dev, "touch_data_addr is null\n");
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void goodix_berlin_parse_finger(struct goodix_berlin_core *cd,
>> + const void *buf, int touch_num)
>> +{
>> + const struct goodix_berlin_touch_data *touch_data = buf;
>> + int i;
>> +
>> + /* Check for data validity */
>> + for (i = 0; i < touch_num; i++) {
>> + unsigned int id;
>> +
>> + id = FIELD_GET(GOODIX_BERLIN_TOUCH_ID_MASK, touch_data[i].id);
>> +
>> + if (id >= GOODIX_BERLIN_MAX_TOUCH) {
>> + dev_warn(cd->dev, "invalid finger id %d\n", id);
>> + return;
>
> Is it important to abort entire packet if one if the slots has incorrect
> data? Can we simply skip over these contacts?
Indeed, merged the for loops and simply skip the invalid finger id.
>
>> + }
>> + }
>> +
>> + /* Report finger touches */
>> + for (i = 0; i < touch_num; i++) {
>> + input_mt_slot(cd->input_dev,
>> + FIELD_GET(GOODIX_BERLIN_TOUCH_ID_MASK,
>> + touch_data[i].id));
>> + input_mt_report_slot_state(cd->input_dev, MT_TOOL_FINGER, true);
>> +
>> + touchscreen_report_pos(cd->input_dev, &cd->props,
>> + __le16_to_cpu(touch_data[i].x),
>> + __le16_to_cpu(touch_data[i].y),
>> + true);
>> + input_report_abs(cd->input_dev, ABS_MT_TOUCH_MAJOR,
>> + __le16_to_cpu(touch_data[i].w));
>> + }
>> +
>> + input_mt_sync_frame(cd->input_dev);
>> + input_sync(cd->input_dev);
>> +}
>> +
>> +static void goodix_berlin_touch_handler(struct goodix_berlin_core *cd,
>> + const void *pre_buf, u32 pre_buf_len)
>> +{
>> + static u8 buffer[GOODIX_BERLIN_IRQ_READ_LEN(GOODIX_BERLIN_MAX_TOUCH)];
>
> No, please no static data. The drivers should be ready to handle more
> than one device on a system. If the buffer is large-ish put it into
> goodix_berlin_core.
This is a typo from vendor kernel, I didn't want a static buffer here...
The buffer is only 26 bytes, it's small enough to stay here in non-static.
>
>
>> + u8 point_type, touch_num;
>> + int error;
>> +
>> + /* copy pre-data to buffer */
>> + memcpy(buffer, pre_buf, pre_buf_len);
>> +
>> + touch_num = FIELD_GET(GOODIX_BERLIN_TOUCH_COUNT_MASK,
>> + buffer[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]);
>> +
>> + if (touch_num > GOODIX_BERLIN_MAX_TOUCH) {
>> + dev_warn(cd->dev, "invalid touch num %d\n", touch_num);
>> + return;
>> + }
>> +
>> + if (touch_num) {
>> + /* read more data if more than 2 touch events */
>> + if (unlikely(touch_num > 2)) {
>> + error = regmap_raw_read(cd->regmap,
>> + cd->touch_data_addr + pre_buf_len,
>> + &buffer[pre_buf_len],
>> + (touch_num - 2) * GOODIX_BERLIN_BYTES_PER_POINT);
>> + if (error) {
>> + dev_err_ratelimited(cd->dev, "failed to get touch data, %d\n",
>> + error);
>> + return;
>> + }
>> + }
>> +
>> + point_type = FIELD_GET(GOODIX_BERLIN_POINT_TYPE_MASK,
>> + buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN]);
>> +
>> + if (point_type == GOODIX_BERLIN_POINT_TYPE_STYLUS ||
>> + point_type == GOODIX_BERLIN_POINT_TYPE_STYLUS_HOVER) {
>> + dev_warn_once(cd->dev, "Stylus event type not handled\n");
>> + return;
>> + }
>> +
>> + if (!goodix_berlin_checksum_valid(&buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN],
>> + touch_num * GOODIX_BERLIN_BYTES_PER_POINT + 2)) {
>> + dev_err(cd->dev, "touch data checksum error, data: %*ph\n",
>> + touch_num * GOODIX_BERLIN_BYTES_PER_POINT + 2,
>> + &buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN]);
>> + return;
>> + }
>> + }
>> +
>> + goodix_berlin_parse_finger(cd, &buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN],
>> + touch_num);
>> +}
>> +
>> +static int goodix_berlin_request_handle_reset(struct goodix_berlin_core *cd)
>> +{
>> + gpiod_set_value(cd->reset_gpio, 1);
>> + usleep_range(2000, 2100);
>> + gpiod_set_value(cd->reset_gpio, 0);
>> +
>> + msleep(GOODIX_BERLIN_NORMAL_RESET_DELAY_MS);
>
> The reset line handling is optional, we should skip waits if there is
> no GPIO defined for the board.
Ack, instead I only call this if gpio is valid.
>
>> +
>> + return 0;
>> +}
>> +
>> +static irqreturn_t goodix_berlin_threadirq_func(int irq, void *data)
>> +{
>> + struct goodix_berlin_core *cd = data;
>> + u8 buf[GOODIX_BERLIN_IRQ_READ_LEN(2)];
>> + u8 event_status;
>> + int error;
>> +
>> + /* First, read buffer with space for 2 touch events */
>> + error = regmap_raw_read(cd->regmap, cd->touch_data_addr, buf,
>> + GOODIX_BERLIN_IRQ_READ_LEN(2));
>> + if (error) {
>> + dev_err_ratelimited(cd->dev, "failed get event head data, %d\n", error);
>> + return IRQ_HANDLED;
>> + }
>> +
>> + if (buf[GOODIX_BERLIN_STATUS_OFFSET] == 0)
>> + return IRQ_HANDLED;
>> +
>> + if (!goodix_berlin_checksum_valid(buf, GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN)) {
>> + dev_warn_ratelimited(cd->dev, "touch head checksum err : %*ph\n",
>> + GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN, buf);
>> + return IRQ_HANDLED;
>> + }
>> +
>> + event_status = buf[GOODIX_BERLIN_STATUS_OFFSET];
>> +
>> + if (event_status & GOODIX_BERLIN_TOUCH_EVENT)
>> + goodix_berlin_touch_handler(cd, buf, GOODIX_BERLIN_IRQ_READ_LEN(2));
>> +
>> + if (event_status & GOODIX_BERLIN_REQUEST_EVENT) {
>> + switch (buf[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]) {
>> + case GOODIX_BERLIN_REQUEST_CODE_RESET:
>> + goodix_berlin_request_handle_reset(cd);
>> + break;
>> +
>> + default:
>> + dev_warn(cd->dev, "unsupported request code 0x%x\n",
>> + buf[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]);
>> + }
>> + }
>> +
>> + /* Clear up status field */
>> + regmap_write(cd->regmap, cd->touch_data_addr, 0);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int goodix_berlin_input_dev_config(struct goodix_berlin_core *cd,
>> + const struct input_id *id)
>> +{
>> + struct input_dev *input_dev;
>> + int error;
>> +
>> + input_dev = devm_input_allocate_device(cd->dev);
>> + if (!input_dev)
>> + return -ENOMEM;
>> +
>> + cd->input_dev = input_dev;
>> + input_set_drvdata(input_dev, cd);
>> +
>> + input_dev->name = "Goodix Berlin Capacitive TouchScreen";
>> + input_dev->phys = "input/ts";
>> +
>> + input_dev->id = *id;
>> +
>> + input_set_abs_params(cd->input_dev, ABS_MT_POSITION_X, 0, SZ_64K - 1, 0, 0);
>> + input_set_abs_params(cd->input_dev, ABS_MT_POSITION_Y, 0, SZ_64K - 1, 0, 0);
>> + input_set_abs_params(cd->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
>> +
>> + touchscreen_parse_properties(cd->input_dev, true, &cd->props);
>> +
>> + error = input_mt_init_slots(cd->input_dev, GOODIX_BERLIN_MAX_TOUCH,
>> + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
>> + if (error)
>> + return error;
>> +
>> + return input_register_device(cd->input_dev);
>
> Please in functions with multiple possible failure paths use format
>
> error = op(...);
> if (error)
> return error;
>
> return 0;
Ack, will check for this in the whole patchset.
Thanks for review,
Neil
>
> Thanks.
>