2024-04-19 06:19:46

by claudiu beznea

[permalink] [raw]
Subject: [PATCH v3] pinctrl: renesas: rzg2l: Configure the interrupt type on resume

From: Claudiu Beznea <[email protected]>

Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT
source at the same time") removed the setup of TINT from
rzg2l_irqc_irq_enable(). To address the spourious interrupt issue the setup
of TINT has been moved in rzg2l_tint_set_edge() though
rzg2l_disable_tint_and_set_tint_source(). With this, the interrupts are
not properly re-configured after a suspend-to-RAM cycle. To address
this issue and avoid spurious interrupts while resumming set the
interrupt type before enabling it.

Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
Signed-off-by: Claudiu Beznea <[email protected]>
---

Changes in v3:
- moved dev_crit() out of critical section

Changes in v2:
- none; this patch was part of series at [1] and added in v2 of that
series

[1] https://lore.kernel.org/all/[email protected]/

drivers/pinctrl/renesas/pinctrl-rzg2l.c | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 93916553bcc7..20425afc6b33 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -2045,7 +2045,9 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)

for (unsigned int i = 0; i < RZG2L_TINT_MAX_INTERRUPT; i++) {
struct irq_data *data;
+ unsigned long flags;
unsigned int virq;
+ int ret;

if (!pctrl->hwirq[i])
continue;
@@ -2063,17 +2065,18 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
continue;
}

- if (!irqd_irq_disabled(data)) {
- unsigned long flags;
-
- /*
- * This has to be atomically executed to protect against a concurrent
- * interrupt.
- */
- raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
+ /*
+ * This has to be atomically executed to protect against a concurrent
+ * interrupt.
+ */
+ raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
+ ret = rzg2l_gpio_irq_set_type(data, irqd_get_trigger_type(data));
+ if (!ret && !irqd_irq_disabled(data))
rzg2l_gpio_irq_enable(data);
- raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
- }
+ raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
+
+ if (ret)
+ dev_crit(pctrl->dev, "Failed to set IRQ type for virq=%u\n", virq);
}
}

--
2.39.2



2024-04-19 06:35:45

by claudiu beznea

[permalink] [raw]
Subject: Re: [PATCH v3] pinctrl: renesas: rzg2l: Configure the interrupt type on resume



On 19.04.2024 09:19, Claudiu wrote:
> From: Claudiu Beznea <[email protected]>
>
> Commit dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT
> source at the same time") removed the setup of TINT from
> rzg2l_irqc_irq_enable(). To address the spourious interrupt issue the setup
> of TINT has been moved in rzg2l_tint_set_edge() though
> rzg2l_disable_tint_and_set_tint_source(). With this, the interrupts are
> not properly re-configured after a suspend-to-RAM cycle. To address
> this issue and avoid spurious interrupts while resumming set the
> interrupt type before enabling it.
>
> Fixes: dce0919c83c3 ("irqchip/renesas-rzg2l: Do not set TIEN and TINT source at the same time")
> Signed-off-by: Claudiu Beznea <[email protected]>
> ---
>
> Changes in v3:

I just noticed I used the wrong versioning here and in patch title. Sorry
for that. I'll send an update.

Please ignore this patch.

Thank you,
Claudiu Beznea

> - moved dev_crit() out of critical section
>
> Changes in v2:
> - none; this patch was part of series at [1] and added in v2 of that
> series
>
> [1] https://lore.kernel.org/all/[email protected]/
>
> drivers/pinctrl/renesas/pinctrl-rzg2l.c | 23 +++++++++++++----------
> 1 file changed, 13 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> index 93916553bcc7..20425afc6b33 100644
> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -2045,7 +2045,9 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
>
> for (unsigned int i = 0; i < RZG2L_TINT_MAX_INTERRUPT; i++) {
> struct irq_data *data;
> + unsigned long flags;
> unsigned int virq;
> + int ret;
>
> if (!pctrl->hwirq[i])
> continue;
> @@ -2063,17 +2065,18 @@ static void rzg2l_gpio_irq_restore(struct rzg2l_pinctrl *pctrl)
> continue;
> }
>
> - if (!irqd_irq_disabled(data)) {
> - unsigned long flags;
> -
> - /*
> - * This has to be atomically executed to protect against a concurrent
> - * interrupt.
> - */
> - raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
> + /*
> + * This has to be atomically executed to protect against a concurrent
> + * interrupt.
> + */
> + raw_spin_lock_irqsave(&pctrl->lock.rlock, flags);
> + ret = rzg2l_gpio_irq_set_type(data, irqd_get_trigger_type(data));
> + if (!ret && !irqd_irq_disabled(data))
> rzg2l_gpio_irq_enable(data);
> - raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
> - }
> + raw_spin_unlock_irqrestore(&pctrl->lock.rlock, flags);
> +
> + if (ret)
> + dev_crit(pctrl->dev, "Failed to set IRQ type for virq=%u\n", virq);
> }
> }
>