On 05/05/2022 10:14, Akhil R wrote:
> Use platform_irq_get() instead platform_get_resource() for IRQ resource
> to fix the probe failure. platform_get_resource() fails to fetch the IRQ
> resource as it might not be ready at that time.
>
> platform_irq_get() is also the recommended way to get interrupt as it
> directly gives the IRQ number and no conversion from resource is
> required.
>
> Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver")
> Reported-by: Jonathan Hunter <[email protected]>
> Signed-off-by: Akhil R <[email protected]>
> ---
> drivers/dma/tegra186-gpc-dma.c | 12 ++++--------
> 1 file changed, 4 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/dma/tegra186-gpc-dma.c b/drivers/dma/tegra186-gpc-dma.c
> index 97fe0e9e9b83..3951db527dec 100644
> --- a/drivers/dma/tegra186-gpc-dma.c
> +++ b/drivers/dma/tegra186-gpc-dma.c
> @@ -1328,7 +1328,6 @@ static int tegra_dma_probe(struct platform_device *pdev)
> struct iommu_fwspec *iommu_spec;
> unsigned int stream_id, i;
> struct tegra_dma *tdma;
> - struct resource *res;
> int ret;
>
> cdata = of_device_get_match_data(&pdev->dev);
> @@ -1367,16 +1366,13 @@ static int tegra_dma_probe(struct platform_device *pdev)
> for (i = 0; i < cdata->nr_channels; i++) {
> struct tegra_dma_channel *tdc = &tdma->channels[i];
>
> + tdc->irq = platform_get_irq(pdev, i);
> + if (tdc->irq < 0)
> + return tdc->irq;
> +
> tdc->chan_base_offset = TEGRA_GPCDMA_CHANNEL_BASE_ADD_OFFSET +
> i * cdata->channel_reg_size;
> - res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
> - if (!res) {
> - dev_err(&pdev->dev, "No irq resource for chan %d\n", i);
> - return -EINVAL;
> - }
> - tdc->irq = res->start;
> snprintf(tdc->name, sizeof(tdc->name), "gpcdma.%d", i);
> -
> tdc->tdma = tdma;
> tdc->id = i;
> tdc->slave_id = -1;
Thanks!
Reviewed-by: Jon Hunter <[email protected]>
Jon
--
nvpublic
Vinod,
On 05/05/2022 10:18, Jon Hunter wrote:
>
> On 05/05/2022 10:14, Akhil R wrote:
>> Use platform_irq_get() instead platform_get_resource() for IRQ resource
>> to fix the probe failure. platform_get_resource() fails to fetch the IRQ
>> resource as it might not be ready at that time.
>>
>> platform_irq_get() is also the recommended way to get interrupt as it
>> directly gives the IRQ number and no conversion from resource is
>> required.
>>
>> Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver")
>> Reported-by: Jonathan Hunter <[email protected]>
>> Signed-off-by: Akhil R <[email protected]>
>> ---
>> drivers/dma/tegra186-gpc-dma.c | 12 ++++--------
>> 1 file changed, 4 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/dma/tegra186-gpc-dma.c
>> b/drivers/dma/tegra186-gpc-dma.c
>> index 97fe0e9e9b83..3951db527dec 100644
>> --- a/drivers/dma/tegra186-gpc-dma.c
>> +++ b/drivers/dma/tegra186-gpc-dma.c
>> @@ -1328,7 +1328,6 @@ static int tegra_dma_probe(struct
>> platform_device *pdev)
>> struct iommu_fwspec *iommu_spec;
>> unsigned int stream_id, i;
>> struct tegra_dma *tdma;
>> - struct resource *res;
>> int ret;
>> cdata = of_device_get_match_data(&pdev->dev);
>> @@ -1367,16 +1366,13 @@ static int tegra_dma_probe(struct
>> platform_device *pdev)
>> for (i = 0; i < cdata->nr_channels; i++) {
>> struct tegra_dma_channel *tdc = &tdma->channels[i];
>> + tdc->irq = platform_get_irq(pdev, i);
>> + if (tdc->irq < 0)
>> + return tdc->irq;
>> +
>> tdc->chan_base_offset = TEGRA_GPCDMA_CHANNEL_BASE_ADD_OFFSET +
>> i * cdata->channel_reg_size;
>> - res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
>> - if (!res) {
>> - dev_err(&pdev->dev, "No irq resource for chan %d\n", i);
>> - return -EINVAL;
>> - }
>> - tdc->irq = res->start;
>> snprintf(tdc->name, sizeof(tdc->name), "gpcdma.%d", i);
>> -
>> tdc->tdma = tdma;
>> tdc->id = i;
>> tdc->slave_id = -1;
>
>
> Thanks!
>
> Reviewed-by: Jon Hunter <[email protected]>
OK to pick this up for -next/5.19? This is preventing the GPC DMA driver
from working.
Jon
--
nvpublic