Hi David,
On 10/05/2017 01:00 PM, David Howells wrote:
> Hi Ard, Michael,
>
> Attached is a draft for a manual page (kernel_lockdown.7) that I intend to
> point at from messages emitted when the kernel prohibits something because the
> kernel is in 'lockdown' mode, typically triggered by EFI secure boot.
>
> Let me know what you think.
Thanks for the page proposal. Several people sent feedback. Will you
revise the draft?
Thanks,
Michael
> David
> ---
> .\"
> .\" Copyright (C) 2017 Red Hat, Inc. All Rights Reserved.
> .\" Written by David Howells ([email protected])
> .\"
> .\" %%%LICENSE_START(GPLv2+_SW_ONEPARA)
> .\" This program is free software; you can redistribute it and/or
> .\" modify it under the terms of the GNU General Public License
> .\" as published by the Free Software Foundation; either version
> .\" 2 of the License, or (at your option) any later version.
> .\" %%%LICENSE_END
> .\"
> .TH "KERNEL LOCKDOWN" 7 2017-10-05 Linux "Linux Programmer's Manual"
> .SH NAME
> Kernel Lockdown \- Kernel image access prevention feature
> .SH DESCRIPTION
> The Kernel Lockdown feature is designed to prevent both direct and indirect
> access to a running kernel image, attempting to protect against unauthorised
> modification of the kernel image and to prevent access to security and
> cryptographic data located in kernel memory, whilst still permitting driver
> modules to be loaded.
> .P
> Lockdown is typically enabled during boot and may be terminated, if configured,
> by typing a special key combination on a directly attached physical keyboard.
> .P
> If a prohibited or restricted feature is accessed or used, the kernel will emit
> a message that looks like:
> .P
> .RS
> Lockdown: X is restricted, see man kernel_lockdown(7)
> .RE
> .P
> where X indicates what is restricted.
> .P
> On an EFI-enabled x86 or arm64 machine, lockdown will be automatically enabled
> if the system boots in EFI Secure Boot mode.
> .P
> If the kernel is appropriately configured, lockdown may be lifted by typing the
> appropriate sequence on a directly attached physical keyboard. For x86
> machines, this is
> .IR SysRq+x .
> .\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> .SH COVERAGE
> When lockdown is in effect, a number of things are disabled or restricted in
> use. This includes special device files and kernel services that allow direct
> access of the kernel image:
> .P
> .RS
> /dev/mem
> .br
> /dev/kmem
> .br
> /dev/kcore
> .br
> /dev/ioports
> .br
> BPF memory access functions
> .RE
> .P
> and the ability to directly configure and control devices, so as to prevent the
> use of a device to access or modify a kernel image:
> .P
> .RS
> The use of module parameters that directly specify hardware parameters to
> drivers through the kernel command line or when loading a module.
> .P
> The use of direct PCI BAR access.
> .P
> The use of the ioperm and iopl instructions on x86.
> .P
> The use of the KD*IO console ioctls.
> .P
> The use of the TIOCSSERIAL serial ioctl.
> .P
> The alteration of MSR registers on x86.
> .P
> The replacement of the PCMCIA CIS.
> .P
> The overriding of ACPI tables.
> .P
> The use of ACPI error injection.
> .P
> The specification of the ACPI RDSP address.
> .P
> The use of ACPI custom methods.
> .RE
> .P
> The following facilities are restricted:
> .P
> .RS
> Only validly signed modules may be loaded.
> .P
> Only validly signed binaries may be kexec'd.
> .P
> Only validly signed device firmware may be loaded.
> .P
> Only validly signed wifi databases may be use.
> .P
> Unencrypted hibernation/suspend to swap are disallowed as the kernel image is
> saved to a medium that can then be accessed.
> .P
> Use of debugfs is not permitted as this allows a whole range of actions
> including direct configuration of, access to and driving of hardware.
> .RE
> .\"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
> .SH SEE ALSO
> .ad l
> .nh
>
>
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
From 1580493530342023731@xxx Fri Oct 06 07:48:07 +0000 2017
X-GM-THRID: 1580415097298572743
X-Gmail-Labels: Inbox,Category Forums