2018-04-20 17:37:02

by Tom Hromatka

[permalink] [raw]
Subject: [PATCH v2 0/2] sparc64: Add privileged ADI driver

ADI is a feature supported on SPARC M7 and newer processors to allow
hardware to catch rogue accesses to memory. ADI is supported for data
fetches only and not instruction fetches. An app can enable ADI on its
data pages, set version tags on them and use versioned addresses to
access the data pages. Upper bits of the address contain the version
tag. On M7 processors, upper four bits (bits 63-60) contain the version
tag. If a rogue app attempts to access ADI enabled data pages, its
access is blocked and processor generates an exception. Please see
Documentation/sparc/adi.txt for further details.

This patchset implements a char driver to read/write ADI versions from
privileged user space processes. Intended consumers are makedumpfile
and crash.

v2:
* Simplified copyright headers
* Updated copyright headers to use GPL v3 or later
* Completely reworked sparc64 selftests Makefiles. Used the
android selftests Makefiles as an example
* Added run.sh and drivers_test.sh to the sparc64 selftest
directory. Used bpf/test_kmod.sh and the android selftests
as examples
* Minor cleanups in the selftest adi-test.c
* Added calls to ksft_test_*() in the adi-test.c

Tom Hromatka (2):
char: sparc64: Add privileged ADI driver
selftests: sparc64: char: Selftest for privileged ADI driver

drivers/char/Kconfig | 12 +
drivers/char/Makefile | 1 +
drivers/char/adi.c | 251 +++++++
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/sparc64/Makefile | 46 ++
tools/testing/selftests/sparc64/drivers/.gitignore | 1 +
tools/testing/selftests/sparc64/drivers/Makefile | 15 +
tools/testing/selftests/sparc64/drivers/adi-test.c | 732 +++++++++++++++++++++
.../selftests/sparc64/drivers/drivers_test.sh | 30 +
tools/testing/selftests/sparc64/run.sh | 3 +
10 files changed, 1092 insertions(+)
create mode 100644 drivers/char/adi.c
create mode 100644 tools/testing/selftests/sparc64/Makefile
create mode 100644 tools/testing/selftests/sparc64/drivers/.gitignore
create mode 100644 tools/testing/selftests/sparc64/drivers/Makefile
create mode 100644 tools/testing/selftests/sparc64/drivers/adi-test.c
create mode 100755 tools/testing/selftests/sparc64/drivers/drivers_test.sh
create mode 100755 tools/testing/selftests/sparc64/run.sh

--
2.15.0



2018-04-20 17:36:14

by Tom Hromatka

[permalink] [raw]
Subject: [PATCH v2 1/2] char: sparc64: Add privileged ADI driver

SPARC M7 and newer processors utilize ADI to version and
protect memory. This driver is capable of reading/writing
ADI/MCD versions from privileged user space processes.
Addresses in the adi file are mapped linearly to physical
memory at a ratio of 1:adi_blksz. Thus, a read (or write)
of offset K in the file operates upon the ADI version at
physical address K * adi_blksz. The version information
is encoded as one version per byte. Intended consumers
are makedumpfile and crash.

Signed-off-by: Tom Hromatka <[email protected]>
Reviewed-by: Khalid Aziz <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Reviewed-by: Anthony Yznaga <[email protected]>
---
drivers/char/Kconfig | 12 +++
drivers/char/Makefile | 1 +
drivers/char/adi.c | 251 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 264 insertions(+)
create mode 100644 drivers/char/adi.c

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 40947a796666..5ecddc95a698 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -540,5 +540,17 @@ source "drivers/s390/char/Kconfig"

source "drivers/char/xillybus/Kconfig"

+config ADI
+ tristate "SPARC Privileged ADI driver"
+ depends on SPARC64
+ default m
+ help
+ SPARC M7 and newer processors utilize ADI (Application Data
+ Integrity) to version and protect memory. This driver provides
+ read/write access to the ADI versions for privileged processes.
+ This feature is also known as MCD (Memory Corruption Detection)
+ and SSM (Silicon Secured Memory). Intended consumers of this
+ driver include crash and makedumpfile.
+
endmenu

diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index c97c768cd1dd..b8d42b4e979b 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -57,3 +57,4 @@ js-rtc-y = rtc.o

obj-$(CONFIG_XILLYBUS) += xillybus/
obj-$(CONFIG_POWERNV_OP_PANEL) += powernv-op-panel.o
+obj-$(CONFIG_ADI) += adi.o
diff --git a/drivers/char/adi.c b/drivers/char/adi.c
new file mode 100644
index 000000000000..f94ddba092e8
--- /dev/null
+++ b/drivers/char/adi.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright (c) 2017, 2018, Oracle and/or its affiliates. All rights reserved.
+ * Author: Tom Hromatka <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <asm/asi.h>
+
+#define MODULE_NAME "adi"
+#define MAX_BUF_SZ 4096
+
+static int adi_open(struct inode *inode, struct file *file)
+{
+ file->f_mode |= FMODE_UNSIGNED_OFFSET;
+ return 0;
+}
+
+static int read_mcd_tag(unsigned long addr)
+{
+ long err;
+ int ver;
+
+ __asm__ __volatile__(
+ "1: ldxa [%[addr]] %[asi], %[ver]\n"
+ " mov 0, %[err]\n"
+ "2:\n"
+ " .section .fixup,#alloc,#execinstr\n"
+ " .align 4\n"
+ "3: sethi %%hi(2b), %%g1\n"
+ " jmpl %%g1 + %%lo(2b), %%g0\n"
+ " mov %[invalid], %[err]\n"
+ " .previous\n"
+ " .section __ex_table, \"a\"\n"
+ " .align 4\n"
+ " .word 1b, 3b\n"
+ " .previous\n"
+ : [ver] "=r" (ver), [err] "=r" (err)
+ : [addr] "r" (addr), [invalid] "i" (EFAULT),
+ [asi] "i" (ASI_MCD_REAL)
+ : "memory", "g1"
+ );
+
+ if (err)
+ return -EFAULT;
+ else
+ return ver;
+}
+
+static ssize_t adi_read(struct file *file, char __user *buf,
+ size_t count, loff_t *offp)
+{
+ size_t ver_buf_sz, bytes_read = 0;
+ int ver_buf_idx = 0;
+ loff_t offset;
+ u8 *ver_buf;
+ ssize_t ret;
+
+ ver_buf_sz = min_t(size_t, count, MAX_BUF_SZ);
+ ver_buf = kmalloc(ver_buf_sz, GFP_KERNEL);
+ if (!ver_buf)
+ return -ENOMEM;
+
+ offset = (*offp) * adi_blksize();
+
+ while (bytes_read < count) {
+ ret = read_mcd_tag(offset);
+ if (ret < 0)
+ goto out;
+
+ ver_buf[ver_buf_idx] = (u8)ret;
+ ver_buf_idx++;
+ offset += adi_blksize();
+
+ if (ver_buf_idx >= ver_buf_sz) {
+ if (copy_to_user(buf + bytes_read, ver_buf,
+ ver_buf_sz)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ bytes_read += ver_buf_sz;
+ ver_buf_idx = 0;
+
+ ver_buf_sz = min(count - bytes_read,
+ (size_t)MAX_BUF_SZ);
+ }
+ }
+
+ (*offp) += bytes_read;
+ ret = bytes_read;
+out:
+ kfree(ver_buf);
+ return ret;
+}
+
+static int set_mcd_tag(unsigned long addr, u8 ver)
+{
+ long err;
+
+ __asm__ __volatile__(
+ "1: stxa %[ver], [%[addr]] %[asi]\n"
+ " mov 0, %[err]\n"
+ "2:\n"
+ " .section .fixup,#alloc,#execinstr\n"
+ " .align 4\n"
+ "3: sethi %%hi(2b), %%g1\n"
+ " jmpl %%g1 + %%lo(2b), %%g0\n"
+ " mov %[invalid], %[err]\n"
+ " .previous\n"
+ " .section __ex_table, \"a\"\n"
+ " .align 4\n"
+ " .word 1b, 3b\n"
+ " .previous\n"
+ : [err] "=r" (err)
+ : [ver] "r" (ver), [addr] "r" (addr),
+ [invalid] "i" (EFAULT), [asi] "i" (ASI_MCD_REAL)
+ : "memory", "g1"
+ );
+
+ if (err)
+ return -EFAULT;
+ else
+ return ver;
+}
+
+static ssize_t adi_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *offp)
+{
+ size_t ver_buf_sz, bytes_written = 0;
+ loff_t offset;
+ u8 *ver_buf;
+ ssize_t ret;
+ int i;
+
+ if (count <= 0)
+ return -EINVAL;
+
+ ver_buf_sz = min_t(size_t, count, MAX_BUF_SZ);
+ ver_buf = kmalloc(ver_buf_sz, (size_t)GFP_KERNEL);
+ if (!ver_buf)
+ return -ENOMEM;
+
+ offset = (*offp) * adi_blksize();
+
+ do {
+ if (copy_from_user(ver_buf, &buf[bytes_written],
+ ver_buf_sz)) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ for (i = 0; i < ver_buf_sz; i++) {
+ ret = set_mcd_tag(offset, ver_buf[i]);
+ if (ret < 0)
+ goto out;
+
+ offset += adi_blksize();
+ }
+
+ bytes_written += ver_buf_sz;
+ ver_buf_sz = min(count - bytes_written, (size_t)MAX_BUF_SZ);
+ } while (bytes_written < count);
+
+ (*offp) += bytes_written;
+ ret = bytes_written;
+out:
+ __asm__ __volatile__("membar #Sync");
+ kfree(ver_buf);
+ return ret;
+}
+
+static loff_t adi_llseek(struct file *file, loff_t offset, int whence)
+{
+ loff_t ret = -EINVAL;
+
+ switch (whence) {
+ case SEEK_END:
+ case SEEK_DATA:
+ case SEEK_HOLE:
+ /* unsupported */
+ return -EINVAL;
+ case SEEK_CUR:
+ if (offset == 0)
+ return file->f_pos;
+
+ offset += file->f_pos;
+ break;
+ case SEEK_SET:
+ break;
+ }
+
+ if (offset != file->f_pos) {
+ file->f_pos = offset;
+ file->f_version = 0;
+ ret = offset;
+ }
+
+ return ret;
+}
+
+static const struct file_operations adi_fops = {
+ .owner = THIS_MODULE,
+ .llseek = adi_llseek,
+ .open = adi_open,
+ .read = adi_read,
+ .write = adi_write,
+};
+
+static struct miscdevice adi_miscdev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = MODULE_NAME,
+ .fops = &adi_fops,
+};
+
+static int __init adi_init(void)
+{
+ if (!adi_capable())
+ return -EPERM;
+
+ return misc_register(&adi_miscdev);
+}
+
+static void __exit adi_exit(void)
+{
+ misc_deregister(&adi_miscdev);
+}
+
+module_init(adi_init);
+module_exit(adi_exit);
+
+MODULE_AUTHOR("Tom Hromatka <[email protected]>");
+MODULE_DESCRIPTION("Privileged interface to ADI");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
--
2.15.0


2018-04-20 17:36:30

by Tom Hromatka

[permalink] [raw]
Subject: [PATCH v2 2/2] selftests: sparc64: char: Selftest for privileged ADI driver

Add a selftest for the sparc64 privileged ADI driver. These
tests verify the read(), pread(), write(), pwrite(), and seek()
functionality of the driver. The tests also report simple
performance statistics:

Syscall Call AvgTime AvgSize
Count (ticks) (bytes)
-------------------------------
read 3 119638 8133
pread 4 118164 6741
write 3 339442 8133
pwrite 4 280134 6741
seek 10 2919 0
Pass 8 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0

Signed-off-by: Tom Hromatka <[email protected]>
Reviewed-by: Allen Pais <[email protected]>
---
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/sparc64/Makefile | 46 ++
tools/testing/selftests/sparc64/drivers/.gitignore | 1 +
tools/testing/selftests/sparc64/drivers/Makefile | 15 +
tools/testing/selftests/sparc64/drivers/adi-test.c | 732 +++++++++++++++++++++
.../selftests/sparc64/drivers/drivers_test.sh | 30 +
tools/testing/selftests/sparc64/run.sh | 3 +
7 files changed, 828 insertions(+)
create mode 100644 tools/testing/selftests/sparc64/Makefile
create mode 100644 tools/testing/selftests/sparc64/drivers/.gitignore
create mode 100644 tools/testing/selftests/sparc64/drivers/Makefile
create mode 100644 tools/testing/selftests/sparc64/drivers/adi-test.c
create mode 100755 tools/testing/selftests/sparc64/drivers/drivers_test.sh
create mode 100755 tools/testing/selftests/sparc64/run.sh

diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 7442dfb73b7f..94da632579e7 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -28,6 +28,7 @@ TARGETS += ptrace
TARGETS += seccomp
TARGETS += sigaltstack
TARGETS += size
+TARGETS += sparc64
TARGETS += splice
TARGETS += static_keys
TARGETS += sync
diff --git a/tools/testing/selftests/sparc64/Makefile b/tools/testing/selftests/sparc64/Makefile
new file mode 100644
index 000000000000..2082eeffd779
--- /dev/null
+++ b/tools/testing/selftests/sparc64/Makefile
@@ -0,0 +1,46 @@
+SUBDIRS := drivers
+
+TEST_PROGS := run.sh
+
+.PHONY: all clean
+
+include ../lib.mk
+
+all:
+ @for DIR in $(SUBDIRS); do \
+ BUILD_TARGET=$(OUTPUT)/$$DIR; \
+ mkdir $$BUILD_TARGET -p; \
+ make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+ #SUBDIR test prog name should be in the form: SUBDIR_test.sh \
+ TEST=$$DIR"_test.sh"; \
+ if [ -e $$DIR/$$TEST ]; then \
+ rsync -a $$DIR/$$TEST $$BUILD_TARGET/; \
+ fi \
+ done
+
+override define RUN_TESTS
+ @cd $(OUTPUT); ./run.sh
+endef
+
+override define INSTALL_RULE
+ mkdir -p $(INSTALL_PATH)
+ install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES)
+
+ @for SUBDIR in $(SUBDIRS); do \
+ BUILD_TARGET=$(OUTPUT)/$$SUBDIR; \
+ mkdir $$BUILD_TARGET -p; \
+ $(MAKE) OUTPUT=$$BUILD_TARGET -C $$SUBDIR INSTALL_PATH=$(INSTALL_PATH)/$$SUBDIR install; \
+ done;
+endef
+
+override define EMIT_TESTS
+ echo "./run.sh"
+endef
+
+override define CLEAN
+ @for DIR in $(SUBDIRS); do \
+ BUILD_TARGET=$(OUTPUT)/$$DIR; \
+ mkdir $$BUILD_TARGET -p; \
+ make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
+ done
+endef
diff --git a/tools/testing/selftests/sparc64/drivers/.gitignore b/tools/testing/selftests/sparc64/drivers/.gitignore
new file mode 100644
index 000000000000..90e835ed74e6
--- /dev/null
+++ b/tools/testing/selftests/sparc64/drivers/.gitignore
@@ -0,0 +1 @@
+adi-test
diff --git a/tools/testing/selftests/sparc64/drivers/Makefile b/tools/testing/selftests/sparc64/drivers/Makefile
new file mode 100644
index 000000000000..6264f40bbdbc
--- /dev/null
+++ b/tools/testing/selftests/sparc64/drivers/Makefile
@@ -0,0 +1,15 @@
+
+INCLUDEDIR := -I.
+CFLAGS := $(CFLAGS) $(INCLUDEDIR) -Wall -O2 -g
+
+TEST_GEN_FILES := adi-test
+
+all: $(TEST_GEN_FILES)
+
+$(TEST_GEN_FILES): adi-test.c
+
+TEST_PROGS := drivers_test.sh
+
+include ../../lib.mk
+
+$(OUTPUT)/adi-test: adi-test.c
diff --git a/tools/testing/selftests/sparc64/drivers/adi-test.c b/tools/testing/selftests/sparc64/drivers/adi-test.c
new file mode 100644
index 000000000000..22ffd06fba24
--- /dev/null
+++ b/tools/testing/selftests/sparc64/drivers/adi-test.c
@@ -0,0 +1,732 @@
+/*
+ * Copyright (c) 2017, 2018, Oracle and/or its affiliates. All rights reserved.
+ * Author: Tom Hromatka <[email protected]>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/syscall.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#include "../../kselftest.h"
+
+#define DEBUG_LEVEL_1_BIT (0x0001)
+#define DEBUG_LEVEL_2_BIT (0x0002)
+#define DEBUG_LEVEL_3_BIT (0x0004)
+#define DEBUG_LEVEL_4_BIT (0x0008)
+#define DEBUG_TIMING_BIT (0x1000)
+
+#ifndef ARRAY_SIZE
+# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#endif
+
+/* bit mask of enabled bits to print */
+#define DEBUG 0x0001
+
+#define DEBUG_PRINT_L1(...) debug_print(DEBUG_LEVEL_1_BIT, __VA_ARGS__)
+#define DEBUG_PRINT_L2(...) debug_print(DEBUG_LEVEL_2_BIT, __VA_ARGS__)
+#define DEBUG_PRINT_L3(...) debug_print(DEBUG_LEVEL_3_BIT, __VA_ARGS__)
+#define DEBUG_PRINT_L4(...) debug_print(DEBUG_LEVEL_4_BIT, __VA_ARGS__)
+#define DEBUG_PRINT_T(...) debug_print(DEBUG_TIMING_BIT, __VA_ARGS__)
+
+static void debug_print(int level, const char *s, ...)
+{
+ va_list args;
+
+ va_start(args, s);
+
+ if (DEBUG & level)
+ vfprintf(stdout, s, args);
+ va_end(args);
+}
+
+#ifndef min
+#define min(x, y) ((x) < (y) ? x : y)
+#endif
+
+#define RETURN_FROM_TEST(_ret) \
+ do { \
+ DEBUG_PRINT_L1( \
+ "\tTest %s returned %d\n", __func__, _ret); \
+ return _ret; \
+ } while (0)
+
+#define ADI_BLKSZ 64
+#define ADI_MAX_VERSION 15
+
+#define TEST_STEP_FAILURE(_ret) \
+ do { \
+ fprintf(stderr, "\tTest step failure: %d at %s:%d\n", \
+ _ret, __func__, __LINE__); \
+ goto out; \
+ } while (0)
+
+#define RDTICK(_x) \
+ asm volatile(" rd %%tick, %0\n" : "=r" (_x))
+
+static int random_version(void)
+{
+ long tick;
+
+ RDTICK(tick);
+
+ return tick % (ADI_MAX_VERSION + 1);
+}
+
+#define MAX_RANGES_SUPPORTED 5
+static const char system_ram_str[] = "System RAM\n";
+static int range_count;
+static unsigned long long int start_addr[MAX_RANGES_SUPPORTED];
+static unsigned long long int end_addr[MAX_RANGES_SUPPORTED];
+
+struct stats {
+ char name[16];
+ unsigned long total;
+ unsigned long count;
+ unsigned long bytes;
+};
+
+static struct stats read_stats = {
+ .name = "read", .total = 0, .count = 0, .bytes = 0};
+static struct stats pread_stats = {
+ .name = "pread", .total = 0, .count = 0, .bytes = 0};
+static struct stats write_stats = {
+ .name = "write", .total = 0, .count = 0, .bytes = 0};
+static struct stats pwrite_stats = {
+ .name = "pwrite", .total = 0, .count = 0, .bytes = 0};
+static struct stats seek_stats = {
+ .name = "seek", .total = 0, .count = 0, .bytes = 0};
+
+static void update_stats(struct stats * const ustats,
+ unsigned long measurement, unsigned long bytes)
+{
+ ustats->total += measurement;
+ ustats->bytes += bytes;
+ ustats->count++;
+}
+
+static void print_ustats(const struct stats * const ustats)
+{
+ DEBUG_PRINT_L1("%s\t%7d\t%7.0f\t%7.0f\n",
+ ustats->name, ustats->count,
+ (float)ustats->total / (float)ustats->count,
+ (float)ustats->bytes / (float)ustats->count);
+}
+
+static void print_stats(void)
+{
+ DEBUG_PRINT_L1("\nSyscall\tCall\tAvgTime\tAvgSize\n"
+ "\tCount\t(ticks)\t(bytes)\n"
+ "-------------------------------\n");
+
+ print_ustats(&read_stats);
+ print_ustats(&pread_stats);
+ print_ustats(&write_stats);
+ print_ustats(&pwrite_stats);
+ print_ustats(&seek_stats);
+}
+
+static int build_memory_map(void)
+{
+ char line[256];
+ FILE *fp;
+ int i;
+
+ range_count = 0;
+
+ fp = fopen("/proc/iomem", "r");
+ if (!fp) {
+ fprintf(stderr, "/proc/iomem: error %d: %s\n",
+ errno, strerror(errno));
+ return -errno;
+ }
+
+ while (fgets(line, sizeof(line), fp) != 0) {
+ if (strstr(line, system_ram_str)) {
+ char *dash, *end_ptr;
+
+ /* Given a line like this:
+ * d0400000-10ffaffff : System RAM
+ * replace the "-" with a space
+ */
+ dash = strstr(line, "-");
+ dash[0] = 0x20;
+
+ start_addr[range_count] = strtoull(line, &end_ptr, 16);
+ end_addr[range_count] = strtoull(end_ptr, NULL, 16);
+ range_count++;
+ }
+ }
+
+ fclose(fp);
+
+ DEBUG_PRINT_L1("RAM Ranges\n");
+ for (i = 0; i < range_count; i++)
+ DEBUG_PRINT_L1("\trange %d: 0x%llx\t- 0x%llx\n",
+ i, start_addr[i], end_addr[i]);
+
+ if (range_count == 0) {
+ fprintf(stderr, "No valid address ranges found. Error.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int read_adi(int fd, unsigned char *buf, int buf_sz)
+{
+ int ret, bytes_read = 0;
+ long start, end, elapsed_time = 0;
+
+ do {
+ RDTICK(start);
+ ret = read(fd, buf + bytes_read, buf_sz - bytes_read);
+ RDTICK(end);
+ if (ret < 0)
+ return -errno;
+
+ elapsed_time += end - start;
+ update_stats(&read_stats, elapsed_time, buf_sz);
+ bytes_read += ret;
+
+ } while (bytes_read < buf_sz);
+
+ DEBUG_PRINT_T("\tread elapsed timed = %ld\n", elapsed_time);
+ DEBUG_PRINT_L3("\tRead %d bytes\n", bytes_read);
+
+ return bytes_read;
+}
+
+static int pread_adi(int fd, unsigned char *buf,
+ int buf_sz, unsigned long offset)
+{
+ int ret, i, bytes_read = 0;
+ unsigned long cur_offset;
+ long start, end, elapsed_time = 0;
+
+ cur_offset = offset;
+ do {
+ RDTICK(start);
+ ret = pread(fd, buf + bytes_read, buf_sz - bytes_read,
+ cur_offset);
+ RDTICK(end);
+ if (ret < 0)
+ return -errno;
+
+ elapsed_time += end - start;
+ update_stats(&pread_stats, elapsed_time, buf_sz);
+ bytes_read += ret;
+ cur_offset += ret;
+
+ } while (bytes_read < buf_sz);
+
+ DEBUG_PRINT_T("\tpread elapsed timed = %ld\n", elapsed_time);
+ DEBUG_PRINT_L3("\tRead %d bytes starting at offset 0x%lx\n",
+ bytes_read, offset);
+ for (i = 0; i < bytes_read; i++)
+ DEBUG_PRINT_L4("\t\t0x%lx\t%d\n", offset + i, buf[i]);
+
+ return bytes_read;
+}
+
+static int write_adi(int fd, const unsigned char * const buf, int buf_sz)
+{
+ int ret, bytes_written = 0;
+ long start, end, elapsed_time = 0;
+
+ do {
+ RDTICK(start);
+ ret = write(fd, buf + bytes_written, buf_sz - bytes_written);
+ RDTICK(end);
+ if (ret < 0)
+ return -errno;
+
+ elapsed_time += (end - start);
+ update_stats(&write_stats, elapsed_time, buf_sz);
+ bytes_written += ret;
+ } while (bytes_written < buf_sz);
+
+ DEBUG_PRINT_T("\twrite elapsed timed = %ld\n", elapsed_time);
+ DEBUG_PRINT_L3("\tWrote %d of %d bytes\n", bytes_written, buf_sz);
+
+ return bytes_written;
+}
+
+static int pwrite_adi(int fd, const unsigned char * const buf,
+ int buf_sz, unsigned long offset)
+{
+ int ret, bytes_written = 0;
+ unsigned long cur_offset;
+ long start, end, elapsed_time = 0;
+
+ cur_offset = offset;
+
+ do {
+ RDTICK(start);
+ ret = pwrite(fd, buf + bytes_written,
+ buf_sz - bytes_written, cur_offset);
+ RDTICK(end);
+ if (ret < 0) {
+ fprintf(stderr, "pwrite(): error %d: %s\n",
+ errno, strerror(errno));
+ return -errno;
+ }
+
+ elapsed_time += (end - start);
+ update_stats(&pwrite_stats, elapsed_time, buf_sz);
+ bytes_written += ret;
+ cur_offset += ret;
+
+ } while (bytes_written < buf_sz);
+
+ DEBUG_PRINT_T("\tpwrite elapsed timed = %ld\n", elapsed_time);
+ DEBUG_PRINT_L3("\tWrote %d of %d bytes starting at address 0x%lx\n",
+ bytes_written, buf_sz, offset);
+
+ return bytes_written;
+}
+
+static off_t seek_adi(int fd, off_t offset, int whence)
+{
+ long start, end;
+ off_t ret;
+
+ RDTICK(start);
+ ret = lseek(fd, offset, whence);
+ RDTICK(end);
+ DEBUG_PRINT_L2("\tlseek ret = 0x%llx\n", ret);
+ if (ret < 0)
+ goto out;
+
+ DEBUG_PRINT_T("\tlseek elapsed timed = %ld\n", end - start);
+ update_stats(&seek_stats, end - start, 0);
+
+out:
+ (void)lseek(fd, 0, SEEK_END);
+ return ret;
+}
+
+static int test0_prpw_aligned_1byte(int fd)
+{
+ /* somewhat arbitrarily chosen address */
+ unsigned long paddr =
+ (end_addr[range_count - 1] - 0x1000) & ~(ADI_BLKSZ - 1);
+ unsigned char version[1], expected_version;
+ loff_t offset;
+ int ret;
+
+ version[0] = random_version();
+ expected_version = version[0];
+
+ offset = paddr / ADI_BLKSZ;
+
+ ret = pwrite_adi(fd, version, sizeof(version), offset);
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ ret = pread_adi(fd, version, sizeof(version), offset);
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ if (expected_version != version[0]) {
+ DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",
+ expected_version, version[0]);
+ TEST_STEP_FAILURE(-expected_version);
+ }
+
+ ret = 0;
+out:
+ RETURN_FROM_TEST(ret);
+}
+
+#define TEST1_VERSION_SZ 4096
+static int test1_prpw_aligned_4096bytes(int fd)
+{
+ /* somewhat arbitrarily chosen address */
+ unsigned long paddr =
+ (end_addr[range_count - 1] - 0x6000) & ~(ADI_BLKSZ - 1);
+ unsigned char version[TEST1_VERSION_SZ],
+ expected_version[TEST1_VERSION_SZ];
+ loff_t offset;
+ int ret, i;
+
+ for (i = 0; i < TEST1_VERSION_SZ; i++) {
+ version[i] = random_version();
+ expected_version[i] = version[i];
+ }
+
+ offset = paddr / ADI_BLKSZ;
+
+ ret = pwrite_adi(fd, version, sizeof(version), offset);
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ ret = pread_adi(fd, version, sizeof(version), offset);
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ for (i = 0; i < TEST1_VERSION_SZ; i++) {
+ if (expected_version[i] != version[i]) {
+ DEBUG_PRINT_L2(
+ "\tExpected version %d but read version %d\n",
+ expected_version, version[0]);
+ TEST_STEP_FAILURE(-expected_version[i]);
+ }
+ }
+
+ ret = 0;
+out:
+ RETURN_FROM_TEST(ret);
+}
+
+#define TEST2_VERSION_SZ 10327
+static int test2_prpw_aligned_10327bytes(int fd)
+{
+ /* somewhat arbitrarily chosen address */
+ unsigned long paddr =
+ (start_addr[0] + 0x6000) & ~(ADI_BLKSZ - 1);
+ unsigned char version[TEST2_VERSION_SZ],
+ expected_version[TEST2_VERSION_SZ];
+ loff_t offset;
+ int ret, i;
+
+ for (i = 0; i < TEST2_VERSION_SZ; i++) {
+ version[i] = random_version();
+ expected_version[i] = version[i];
+ }
+
+ offset = paddr / ADI_BLKSZ;
+
+ ret = pwrite_adi(fd, version, sizeof(version), offset);
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ ret = pread_adi(fd, version, sizeof(version), offset);
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ for (i = 0; i < TEST2_VERSION_SZ; i++) {
+ if (expected_version[i] != version[i]) {
+ DEBUG_PRINT_L2(
+ "\tExpected version %d but read version %d\n",
+ expected_version, version[0]);
+ TEST_STEP_FAILURE(-expected_version[i]);
+ }
+ }
+
+ ret = 0;
+out:
+ RETURN_FROM_TEST(ret);
+}
+
+#define TEST3_VERSION_SZ 12541
+static int test3_prpw_unaligned_12541bytes(int fd)
+{
+ /* somewhat arbitrarily chosen address */
+ unsigned long paddr =
+ ((start_addr[0] + 0xC000) & ~(ADI_BLKSZ - 1)) + 17;
+ unsigned char version[TEST3_VERSION_SZ],
+ expected_version[TEST3_VERSION_SZ];
+ loff_t offset;
+ int ret, i;
+
+ for (i = 0; i < TEST3_VERSION_SZ; i++) {
+ version[i] = random_version();
+ expected_version[i] = version[i];
+ }
+
+ offset = paddr / ADI_BLKSZ;
+
+ ret = pwrite_adi(fd, version, sizeof(version), offset);
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ ret = pread_adi(fd, version, sizeof(version), offset);
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ for (i = 0; i < TEST3_VERSION_SZ; i++) {
+ if (expected_version[i] != version[i]) {
+ DEBUG_PRINT_L2(
+ "\tExpected version %d but read version %d\n",
+ expected_version, version[0]);
+ TEST_STEP_FAILURE(-expected_version[i]);
+ }
+ }
+
+ ret = 0;
+out:
+ RETURN_FROM_TEST(ret);
+}
+
+static int test4_lseek(int fd)
+{
+#define OFFSET_ADD (0x100)
+#define OFFSET_SUBTRACT (0xFFFFFFF000000000)
+
+ off_t offset_out, offset_in;
+ int ret;
+
+
+ offset_in = 0x123456789abcdef0;
+ offset_out = seek_adi(fd, offset_in, SEEK_SET);
+ if (offset_out != offset_in) {
+ ret = -1;
+ TEST_STEP_FAILURE(ret);
+ }
+
+ /* seek to the current offset. this should return EINVAL */
+ offset_out = seek_adi(fd, offset_in, SEEK_SET);
+ if (offset_out < 0 && errno == EINVAL)
+ DEBUG_PRINT_L2(
+ "\tSEEK_SET failed as designed. Not an error\n");
+ else {
+ ret = -2;
+ TEST_STEP_FAILURE(ret);
+ }
+
+ offset_out = seek_adi(fd, 0, SEEK_CUR);
+ if (offset_out != offset_in) {
+ ret = -3;
+ TEST_STEP_FAILURE(ret);
+ }
+
+ offset_out = seek_adi(fd, OFFSET_ADD, SEEK_CUR);
+ if (offset_out != (offset_in + OFFSET_ADD)) {
+ ret = -4;
+ TEST_STEP_FAILURE(ret);
+ }
+
+ offset_out = seek_adi(fd, OFFSET_SUBTRACT, SEEK_CUR);
+ if (offset_out != (offset_in + OFFSET_ADD + OFFSET_SUBTRACT)) {
+ ret = -5;
+ TEST_STEP_FAILURE(ret);
+ }
+
+ ret = 0;
+out:
+ RETURN_FROM_TEST(ret);
+}
+
+static int test5_rw_aligned_1byte(int fd)
+{
+ /* somewhat arbitrarily chosen address */
+ unsigned long paddr =
+ (end_addr[range_count - 1] - 0xF000) & ~(ADI_BLKSZ - 1);
+ unsigned char version, expected_version;
+ loff_t offset;
+ off_t oret;
+ int ret;
+
+ offset = paddr / ADI_BLKSZ;
+ version = expected_version = random_version();
+
+ oret = seek_adi(fd, offset, SEEK_SET);
+ if (oret != offset) {
+ ret = -1;
+ TEST_STEP_FAILURE(ret);
+ }
+
+ ret = write_adi(fd, &version, sizeof(version));
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ oret = seek_adi(fd, offset, SEEK_SET);
+ if (oret != offset) {
+ ret = -1;
+ TEST_STEP_FAILURE(ret);
+ }
+
+ ret = read_adi(fd, &version, sizeof(version));
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ if (expected_version != version) {
+ DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",
+ expected_version, version);
+ TEST_STEP_FAILURE(-expected_version);
+ }
+
+ ret = 0;
+out:
+ RETURN_FROM_TEST(ret);
+}
+
+#define TEST6_VERSION_SZ 9434
+static int test6_rw_aligned_9434bytes(int fd)
+{
+ /* somewhat arbitrarily chosen address */
+ unsigned long paddr =
+ (end_addr[range_count - 1] - 0x5F000) & ~(ADI_BLKSZ - 1);
+ unsigned char version[TEST6_VERSION_SZ],
+ expected_version[TEST6_VERSION_SZ];
+ loff_t offset;
+ off_t oret;
+ int ret, i;
+
+ offset = paddr / ADI_BLKSZ;
+ for (i = 0; i < TEST6_VERSION_SZ; i++)
+ version[i] = expected_version[i] = random_version();
+
+ oret = seek_adi(fd, offset, SEEK_SET);
+ if (oret != offset) {
+ ret = -1;
+ TEST_STEP_FAILURE(ret);
+ }
+
+ ret = write_adi(fd, version, sizeof(version));
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ memset(version, 0, TEST6_VERSION_SZ);
+
+ oret = seek_adi(fd, offset, SEEK_SET);
+ if (oret != offset) {
+ ret = -1;
+ TEST_STEP_FAILURE(ret);
+ }
+
+ ret = read_adi(fd, version, sizeof(version));
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ for (i = 0; i < TEST6_VERSION_SZ; i++) {
+ if (expected_version[i] != version[i]) {
+ DEBUG_PRINT_L2(
+ "\tExpected version %d but read version %d\n",
+ expected_version[i], version[i]);
+ TEST_STEP_FAILURE(-expected_version[i]);
+ }
+ }
+
+ ret = 0;
+out:
+ RETURN_FROM_TEST(ret);
+}
+
+#define TEST7_VERSION_SZ 14963
+static int test7_rw_aligned_14963bytes(int fd)
+{
+ /* somewhat arbitrarily chosen address */
+ unsigned long paddr =
+ ((start_addr[range_count - 1] + 0xF000) & ~(ADI_BLKSZ - 1)) + 39;
+ unsigned char version[TEST7_VERSION_SZ],
+ expected_version[TEST7_VERSION_SZ];
+ loff_t offset;
+ off_t oret;
+ int ret, i;
+
+ offset = paddr / ADI_BLKSZ;
+ for (i = 0; i < TEST7_VERSION_SZ; i++) {
+ version[i] = random_version();
+ expected_version[i] = version[i];
+ }
+
+ oret = seek_adi(fd, offset, SEEK_SET);
+ if (oret != offset) {
+ ret = -1;
+ TEST_STEP_FAILURE(ret);
+ }
+
+ ret = write_adi(fd, version, sizeof(version));
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ memset(version, 0, TEST7_VERSION_SZ);
+
+ oret = seek_adi(fd, offset, SEEK_SET);
+ if (oret != offset) {
+ ret = -1;
+ TEST_STEP_FAILURE(ret);
+ }
+
+ ret = read_adi(fd, version, sizeof(version));
+ if (ret != sizeof(version))
+ TEST_STEP_FAILURE(ret);
+
+ for (i = 0; i < TEST7_VERSION_SZ; i++) {
+ if (expected_version[i] != version[i]) {
+ DEBUG_PRINT_L2(
+ "\tExpected version %d but read version %d\n",
+ expected_version[i], version[i]);
+ TEST_STEP_FAILURE(-expected_version[i]);
+ }
+
+ paddr += ADI_BLKSZ;
+ }
+
+ ret = 0;
+out:
+ RETURN_FROM_TEST(ret);
+}
+
+static int (*tests[])(int fd) = {
+ test0_prpw_aligned_1byte,
+ test1_prpw_aligned_4096bytes,
+ test2_prpw_aligned_10327bytes,
+ test3_prpw_unaligned_12541bytes,
+ test4_lseek,
+ test5_rw_aligned_1byte,
+ test6_rw_aligned_9434bytes,
+ test7_rw_aligned_14963bytes,
+};
+#define TEST_COUNT ARRAY_SIZE(tests)
+
+int main(int argc, char *argv[])
+{
+ int fd, ret, test;
+
+ ret = build_memory_map();
+ if (ret < 0)
+ return ret;
+
+ fd = open("/dev/adi", O_RDWR);
+ if (fd < 0) {
+ fprintf(stderr, "open: error %d: %s\n",
+ errno, strerror(errno));
+ return -errno;
+ }
+
+ for (test = 0; test < TEST_COUNT; test++) {
+ DEBUG_PRINT_L1("Running test #%d\n", test);
+
+ ret = (*tests[test])(fd);
+ if (ret != 0)
+ ksft_test_result_fail("Test #%d failed: error %d\n",
+ test, ret);
+ else
+ ksft_test_result_pass("Test #%d passed\n", test);
+ }
+
+ print_stats();
+ close(fd);
+
+ if (ksft_get_fail_cnt() > 0)
+ ksft_exit_fail();
+ else
+ ksft_exit_pass();
+
+ /* it's impossible to get here, but the compiler throws a warning
+ * about control reaching the end of non-void function. bah.
+ */
+ return 0;
+}
diff --git a/tools/testing/selftests/sparc64/drivers/drivers_test.sh b/tools/testing/selftests/sparc64/drivers/drivers_test.sh
new file mode 100755
index 000000000000..6d08273b7532
--- /dev/null
+++ b/tools/testing/selftests/sparc64/drivers/drivers_test.sh
@@ -0,0 +1,30 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+SRC_TREE=../../../../
+
+test_run()
+{
+ if [ -f ${SRC_TREE}/drivers/char/adi.ko ]; then
+ insmod ${SRC_TREE}/drivers/char/adi.ko 2> /dev/null
+ if [ $? -ne 0 ]; then
+ rc=1
+ fi
+ else
+ # Use modprobe dry run to check for missing adi module
+ if ! /sbin/modprobe -q -n adi; then
+ echo "adi: [SKIP]"
+ elif /sbin/modprobe -q adi; then
+ echo "adi: ok"
+ else
+ echo "adi: [FAIL]"
+ rc=1
+ fi
+ fi
+ ./adi-test
+ rmmod adi 2> /dev/null
+}
+
+rc=0
+test_run
+exit $rc
diff --git a/tools/testing/selftests/sparc64/run.sh b/tools/testing/selftests/sparc64/run.sh
new file mode 100755
index 000000000000..38ad61f9328e
--- /dev/null
+++ b/tools/testing/selftests/sparc64/run.sh
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+(cd drivers; ./drivers_test.sh)
--
2.15.0


2018-04-20 18:09:53

by Wim Coekaerts

[permalink] [raw]
Subject: Re: [PATCH v2 2/2] selftests: sparc64: char: Selftest for privileged ADI driver

Tom, you used the wrong GPL license header. Please fix that to be v2 not v3.

The

+# SPDX-License-Identifier: GPL-2.0

is correct but the adi-test.c one is not.

On 04/20/2018 10:34 AM, Tom Hromatka wrote:
> Add a selftest for the sparc64 privileged ADI driver. These
> tests verify the read(), pread(), write(), pwrite(), and seek()
> functionality of the driver. The tests also report simple
> performance statistics:
>
> Syscall Call AvgTime AvgSize
> Count (ticks) (bytes)
> -------------------------------
> read 3 119638 8133
> pread 4 118164 6741
> write 3 339442 8133
> pwrite 4 280134 6741
> seek 10 2919 0
> Pass 8 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
>
> Signed-off-by: Tom Hromatka <[email protected]>
> Reviewed-by: Allen Pais <[email protected]>
> ---
> tools/testing/selftests/Makefile | 1 +
> tools/testing/selftests/sparc64/Makefile | 46 ++
> tools/testing/selftests/sparc64/drivers/.gitignore | 1 +
> tools/testing/selftests/sparc64/drivers/Makefile | 15 +
> tools/testing/selftests/sparc64/drivers/adi-test.c | 732 +++++++++++++++++++++
> .../selftests/sparc64/drivers/drivers_test.sh | 30 +
> tools/testing/selftests/sparc64/run.sh | 3 +
> 7 files changed, 828 insertions(+)
> create mode 100644 tools/testing/selftests/sparc64/Makefile
> create mode 100644 tools/testing/selftests/sparc64/drivers/.gitignore
> create mode 100644 tools/testing/selftests/sparc64/drivers/Makefile
> create mode 100644 tools/testing/selftests/sparc64/drivers/adi-test.c
> create mode 100755 tools/testing/selftests/sparc64/drivers/drivers_test.sh
> create mode 100755 tools/testing/selftests/sparc64/run.sh
>
> diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
> index 7442dfb73b7f..94da632579e7 100644
> --- a/tools/testing/selftests/Makefile
> +++ b/tools/testing/selftests/Makefile
> @@ -28,6 +28,7 @@ TARGETS += ptrace
> TARGETS += seccomp
> TARGETS += sigaltstack
> TARGETS += size
> +TARGETS += sparc64
> TARGETS += splice
> TARGETS += static_keys
> TARGETS += sync
> diff --git a/tools/testing/selftests/sparc64/Makefile b/tools/testing/selftests/sparc64/Makefile
> new file mode 100644
> index 000000000000..2082eeffd779
> --- /dev/null
> +++ b/tools/testing/selftests/sparc64/Makefile
> @@ -0,0 +1,46 @@
> +SUBDIRS := drivers
> +
> +TEST_PROGS := run.sh
> +
> +.PHONY: all clean
> +
> +include ../lib.mk
> +
> +all:
> + @for DIR in $(SUBDIRS); do \
> + BUILD_TARGET=$(OUTPUT)/$$DIR; \
> + mkdir $$BUILD_TARGET -p; \
> + make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
> + #SUBDIR test prog name should be in the form: SUBDIR_test.sh \
> + TEST=$$DIR"_test.sh"; \
> + if [ -e $$DIR/$$TEST ]; then \
> + rsync -a $$DIR/$$TEST $$BUILD_TARGET/; \
> + fi \
> + done
> +
> +override define RUN_TESTS
> + @cd $(OUTPUT); ./run.sh
> +endef
> +
> +override define INSTALL_RULE
> + mkdir -p $(INSTALL_PATH)
> + install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES)
> +
> + @for SUBDIR in $(SUBDIRS); do \
> + BUILD_TARGET=$(OUTPUT)/$$SUBDIR; \
> + mkdir $$BUILD_TARGET -p; \
> + $(MAKE) OUTPUT=$$BUILD_TARGET -C $$SUBDIR INSTALL_PATH=$(INSTALL_PATH)/$$SUBDIR install; \
> + done;
> +endef
> +
> +override define EMIT_TESTS
> + echo "./run.sh"
> +endef
> +
> +override define CLEAN
> + @for DIR in $(SUBDIRS); do \
> + BUILD_TARGET=$(OUTPUT)/$$DIR; \
> + mkdir $$BUILD_TARGET -p; \
> + make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
> + done
> +endef
> diff --git a/tools/testing/selftests/sparc64/drivers/.gitignore b/tools/testing/selftests/sparc64/drivers/.gitignore
> new file mode 100644
> index 000000000000..90e835ed74e6
> --- /dev/null
> +++ b/tools/testing/selftests/sparc64/drivers/.gitignore
> @@ -0,0 +1 @@
> +adi-test
> diff --git a/tools/testing/selftests/sparc64/drivers/Makefile b/tools/testing/selftests/sparc64/drivers/Makefile
> new file mode 100644
> index 000000000000..6264f40bbdbc
> --- /dev/null
> +++ b/tools/testing/selftests/sparc64/drivers/Makefile
> @@ -0,0 +1,15 @@
> +
> +INCLUDEDIR := -I.
> +CFLAGS := $(CFLAGS) $(INCLUDEDIR) -Wall -O2 -g
> +
> +TEST_GEN_FILES := adi-test
> +
> +all: $(TEST_GEN_FILES)
> +
> +$(TEST_GEN_FILES): adi-test.c
> +
> +TEST_PROGS := drivers_test.sh
> +
> +include ../../lib.mk
> +
> +$(OUTPUT)/adi-test: adi-test.c
> diff --git a/tools/testing/selftests/sparc64/drivers/adi-test.c b/tools/testing/selftests/sparc64/drivers/adi-test.c
> new file mode 100644
> index 000000000000..22ffd06fba24
> --- /dev/null
> +++ b/tools/testing/selftests/sparc64/drivers/adi-test.c
> @@ -0,0 +1,732 @@
> +/*
> + * Copyright (c) 2017, 2018, Oracle and/or its affiliates. All rights reserved.
> + * Author: Tom Hromatka <[email protected]>
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 3 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include <linux/kernel.h>
> +#include <errno.h>
> +#include <fcntl.h>
> +#include <stdarg.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <sys/syscall.h>
> +#include <sys/types.h>
> +#include <sys/stat.h>
> +#include <unistd.h>
> +
> +#include "../../kselftest.h"
> +
> +#define DEBUG_LEVEL_1_BIT (0x0001)
> +#define DEBUG_LEVEL_2_BIT (0x0002)
> +#define DEBUG_LEVEL_3_BIT (0x0004)
> +#define DEBUG_LEVEL_4_BIT (0x0008)
> +#define DEBUG_TIMING_BIT (0x1000)
> +
> +#ifndef ARRAY_SIZE
> +# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
> +#endif
> +
> +/* bit mask of enabled bits to print */
> +#define DEBUG 0x0001
> +
> +#define DEBUG_PRINT_L1(...) debug_print(DEBUG_LEVEL_1_BIT, __VA_ARGS__)
> +#define DEBUG_PRINT_L2(...) debug_print(DEBUG_LEVEL_2_BIT, __VA_ARGS__)
> +#define DEBUG_PRINT_L3(...) debug_print(DEBUG_LEVEL_3_BIT, __VA_ARGS__)
> +#define DEBUG_PRINT_L4(...) debug_print(DEBUG_LEVEL_4_BIT, __VA_ARGS__)
> +#define DEBUG_PRINT_T(...) debug_print(DEBUG_TIMING_BIT, __VA_ARGS__)
> +
> +static void debug_print(int level, const char *s, ...)
> +{
> + va_list args;
> +
> + va_start(args, s);
> +
> + if (DEBUG & level)
> + vfprintf(stdout, s, args);
> + va_end(args);
> +}
> +
> +#ifndef min
> +#define min(x, y) ((x) < (y) ? x : y)
> +#endif
> +
> +#define RETURN_FROM_TEST(_ret) \
> + do { \
> + DEBUG_PRINT_L1( \
> + "\tTest %s returned %d\n", __func__, _ret); \
> + return _ret; \
> + } while (0)
> +
> +#define ADI_BLKSZ 64
> +#define ADI_MAX_VERSION 15
> +
> +#define TEST_STEP_FAILURE(_ret) \
> + do { \
> + fprintf(stderr, "\tTest step failure: %d at %s:%d\n", \
> + _ret, __func__, __LINE__); \
> + goto out; \
> + } while (0)
> +
> +#define RDTICK(_x) \
> + asm volatile(" rd %%tick, %0\n" : "=r" (_x))
> +
> +static int random_version(void)
> +{
> + long tick;
> +
> + RDTICK(tick);
> +
> + return tick % (ADI_MAX_VERSION + 1);
> +}
> +
> +#define MAX_RANGES_SUPPORTED 5
> +static const char system_ram_str[] = "System RAM\n";
> +static int range_count;
> +static unsigned long long int start_addr[MAX_RANGES_SUPPORTED];
> +static unsigned long long int end_addr[MAX_RANGES_SUPPORTED];
> +
> +struct stats {
> + char name[16];
> + unsigned long total;
> + unsigned long count;
> + unsigned long bytes;
> +};
> +
> +static struct stats read_stats = {
> + .name = "read", .total = 0, .count = 0, .bytes = 0};
> +static struct stats pread_stats = {
> + .name = "pread", .total = 0, .count = 0, .bytes = 0};
> +static struct stats write_stats = {
> + .name = "write", .total = 0, .count = 0, .bytes = 0};
> +static struct stats pwrite_stats = {
> + .name = "pwrite", .total = 0, .count = 0, .bytes = 0};
> +static struct stats seek_stats = {
> + .name = "seek", .total = 0, .count = 0, .bytes = 0};
> +
> +static void update_stats(struct stats * const ustats,
> + unsigned long measurement, unsigned long bytes)
> +{
> + ustats->total += measurement;
> + ustats->bytes += bytes;
> + ustats->count++;
> +}
> +
> +static void print_ustats(const struct stats * const ustats)
> +{
> + DEBUG_PRINT_L1("%s\t%7d\t%7.0f\t%7.0f\n",
> + ustats->name, ustats->count,
> + (float)ustats->total / (float)ustats->count,
> + (float)ustats->bytes / (float)ustats->count);
> +}
> +
> +static void print_stats(void)
> +{
> + DEBUG_PRINT_L1("\nSyscall\tCall\tAvgTime\tAvgSize\n"
> + "\tCount\t(ticks)\t(bytes)\n"
> + "-------------------------------\n");
> +
> + print_ustats(&read_stats);
> + print_ustats(&pread_stats);
> + print_ustats(&write_stats);
> + print_ustats(&pwrite_stats);
> + print_ustats(&seek_stats);
> +}
> +
> +static int build_memory_map(void)
> +{
> + char line[256];
> + FILE *fp;
> + int i;
> +
> + range_count = 0;
> +
> + fp = fopen("/proc/iomem", "r");
> + if (!fp) {
> + fprintf(stderr, "/proc/iomem: error %d: %s\n",
> + errno, strerror(errno));
> + return -errno;
> + }
> +
> + while (fgets(line, sizeof(line), fp) != 0) {
> + if (strstr(line, system_ram_str)) {
> + char *dash, *end_ptr;
> +
> + /* Given a line like this:
> + * d0400000-10ffaffff : System RAM
> + * replace the "-" with a space
> + */
> + dash = strstr(line, "-");
> + dash[0] = 0x20;
> +
> + start_addr[range_count] = strtoull(line, &end_ptr, 16);
> + end_addr[range_count] = strtoull(end_ptr, NULL, 16);
> + range_count++;
> + }
> + }
> +
> + fclose(fp);
> +
> + DEBUG_PRINT_L1("RAM Ranges\n");
> + for (i = 0; i < range_count; i++)
> + DEBUG_PRINT_L1("\trange %d: 0x%llx\t- 0x%llx\n",
> + i, start_addr[i], end_addr[i]);
> +
> + if (range_count == 0) {
> + fprintf(stderr, "No valid address ranges found. Error.\n");
> + return -1;
> + }
> +
> + return 0;
> +}
> +
> +static int read_adi(int fd, unsigned char *buf, int buf_sz)
> +{
> + int ret, bytes_read = 0;
> + long start, end, elapsed_time = 0;
> +
> + do {
> + RDTICK(start);
> + ret = read(fd, buf + bytes_read, buf_sz - bytes_read);
> + RDTICK(end);
> + if (ret < 0)
> + return -errno;
> +
> + elapsed_time += end - start;
> + update_stats(&read_stats, elapsed_time, buf_sz);
> + bytes_read += ret;
> +
> + } while (bytes_read < buf_sz);
> +
> + DEBUG_PRINT_T("\tread elapsed timed = %ld\n", elapsed_time);
> + DEBUG_PRINT_L3("\tRead %d bytes\n", bytes_read);
> +
> + return bytes_read;
> +}
> +
> +static int pread_adi(int fd, unsigned char *buf,
> + int buf_sz, unsigned long offset)
> +{
> + int ret, i, bytes_read = 0;
> + unsigned long cur_offset;
> + long start, end, elapsed_time = 0;
> +
> + cur_offset = offset;
> + do {
> + RDTICK(start);
> + ret = pread(fd, buf + bytes_read, buf_sz - bytes_read,
> + cur_offset);
> + RDTICK(end);
> + if (ret < 0)
> + return -errno;
> +
> + elapsed_time += end - start;
> + update_stats(&pread_stats, elapsed_time, buf_sz);
> + bytes_read += ret;
> + cur_offset += ret;
> +
> + } while (bytes_read < buf_sz);
> +
> + DEBUG_PRINT_T("\tpread elapsed timed = %ld\n", elapsed_time);
> + DEBUG_PRINT_L3("\tRead %d bytes starting at offset 0x%lx\n",
> + bytes_read, offset);
> + for (i = 0; i < bytes_read; i++)
> + DEBUG_PRINT_L4("\t\t0x%lx\t%d\n", offset + i, buf[i]);
> +
> + return bytes_read;
> +}
> +
> +static int write_adi(int fd, const unsigned char * const buf, int buf_sz)
> +{
> + int ret, bytes_written = 0;
> + long start, end, elapsed_time = 0;
> +
> + do {
> + RDTICK(start);
> + ret = write(fd, buf + bytes_written, buf_sz - bytes_written);
> + RDTICK(end);
> + if (ret < 0)
> + return -errno;
> +
> + elapsed_time += (end - start);
> + update_stats(&write_stats, elapsed_time, buf_sz);
> + bytes_written += ret;
> + } while (bytes_written < buf_sz);
> +
> + DEBUG_PRINT_T("\twrite elapsed timed = %ld\n", elapsed_time);
> + DEBUG_PRINT_L3("\tWrote %d of %d bytes\n", bytes_written, buf_sz);
> +
> + return bytes_written;
> +}
> +
> +static int pwrite_adi(int fd, const unsigned char * const buf,
> + int buf_sz, unsigned long offset)
> +{
> + int ret, bytes_written = 0;
> + unsigned long cur_offset;
> + long start, end, elapsed_time = 0;
> +
> + cur_offset = offset;
> +
> + do {
> + RDTICK(start);
> + ret = pwrite(fd, buf + bytes_written,
> + buf_sz - bytes_written, cur_offset);
> + RDTICK(end);
> + if (ret < 0) {
> + fprintf(stderr, "pwrite(): error %d: %s\n",
> + errno, strerror(errno));
> + return -errno;
> + }
> +
> + elapsed_time += (end - start);
> + update_stats(&pwrite_stats, elapsed_time, buf_sz);
> + bytes_written += ret;
> + cur_offset += ret;
> +
> + } while (bytes_written < buf_sz);
> +
> + DEBUG_PRINT_T("\tpwrite elapsed timed = %ld\n", elapsed_time);
> + DEBUG_PRINT_L3("\tWrote %d of %d bytes starting at address 0x%lx\n",
> + bytes_written, buf_sz, offset);
> +
> + return bytes_written;
> +}
> +
> +static off_t seek_adi(int fd, off_t offset, int whence)
> +{
> + long start, end;
> + off_t ret;
> +
> + RDTICK(start);
> + ret = lseek(fd, offset, whence);
> + RDTICK(end);
> + DEBUG_PRINT_L2("\tlseek ret = 0x%llx\n", ret);
> + if (ret < 0)
> + goto out;
> +
> + DEBUG_PRINT_T("\tlseek elapsed timed = %ld\n", end - start);
> + update_stats(&seek_stats, end - start, 0);
> +
> +out:
> + (void)lseek(fd, 0, SEEK_END);
> + return ret;
> +}
> +
> +static int test0_prpw_aligned_1byte(int fd)
> +{
> + /* somewhat arbitrarily chosen address */
> + unsigned long paddr =
> + (end_addr[range_count - 1] - 0x1000) & ~(ADI_BLKSZ - 1);
> + unsigned char version[1], expected_version;
> + loff_t offset;
> + int ret;
> +
> + version[0] = random_version();
> + expected_version = version[0];
> +
> + offset = paddr / ADI_BLKSZ;
> +
> + ret = pwrite_adi(fd, version, sizeof(version), offset);
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + ret = pread_adi(fd, version, sizeof(version), offset);
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + if (expected_version != version[0]) {
> + DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",
> + expected_version, version[0]);
> + TEST_STEP_FAILURE(-expected_version);
> + }
> +
> + ret = 0;
> +out:
> + RETURN_FROM_TEST(ret);
> +}
> +
> +#define TEST1_VERSION_SZ 4096
> +static int test1_prpw_aligned_4096bytes(int fd)
> +{
> + /* somewhat arbitrarily chosen address */
> + unsigned long paddr =
> + (end_addr[range_count - 1] - 0x6000) & ~(ADI_BLKSZ - 1);
> + unsigned char version[TEST1_VERSION_SZ],
> + expected_version[TEST1_VERSION_SZ];
> + loff_t offset;
> + int ret, i;
> +
> + for (i = 0; i < TEST1_VERSION_SZ; i++) {
> + version[i] = random_version();
> + expected_version[i] = version[i];
> + }
> +
> + offset = paddr / ADI_BLKSZ;
> +
> + ret = pwrite_adi(fd, version, sizeof(version), offset);
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + ret = pread_adi(fd, version, sizeof(version), offset);
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + for (i = 0; i < TEST1_VERSION_SZ; i++) {
> + if (expected_version[i] != version[i]) {
> + DEBUG_PRINT_L2(
> + "\tExpected version %d but read version %d\n",
> + expected_version, version[0]);
> + TEST_STEP_FAILURE(-expected_version[i]);
> + }
> + }
> +
> + ret = 0;
> +out:
> + RETURN_FROM_TEST(ret);
> +}
> +
> +#define TEST2_VERSION_SZ 10327
> +static int test2_prpw_aligned_10327bytes(int fd)
> +{
> + /* somewhat arbitrarily chosen address */
> + unsigned long paddr =
> + (start_addr[0] + 0x6000) & ~(ADI_BLKSZ - 1);
> + unsigned char version[TEST2_VERSION_SZ],
> + expected_version[TEST2_VERSION_SZ];
> + loff_t offset;
> + int ret, i;
> +
> + for (i = 0; i < TEST2_VERSION_SZ; i++) {
> + version[i] = random_version();
> + expected_version[i] = version[i];
> + }
> +
> + offset = paddr / ADI_BLKSZ;
> +
> + ret = pwrite_adi(fd, version, sizeof(version), offset);
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + ret = pread_adi(fd, version, sizeof(version), offset);
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + for (i = 0; i < TEST2_VERSION_SZ; i++) {
> + if (expected_version[i] != version[i]) {
> + DEBUG_PRINT_L2(
> + "\tExpected version %d but read version %d\n",
> + expected_version, version[0]);
> + TEST_STEP_FAILURE(-expected_version[i]);
> + }
> + }
> +
> + ret = 0;
> +out:
> + RETURN_FROM_TEST(ret);
> +}
> +
> +#define TEST3_VERSION_SZ 12541
> +static int test3_prpw_unaligned_12541bytes(int fd)
> +{
> + /* somewhat arbitrarily chosen address */
> + unsigned long paddr =
> + ((start_addr[0] + 0xC000) & ~(ADI_BLKSZ - 1)) + 17;
> + unsigned char version[TEST3_VERSION_SZ],
> + expected_version[TEST3_VERSION_SZ];
> + loff_t offset;
> + int ret, i;
> +
> + for (i = 0; i < TEST3_VERSION_SZ; i++) {
> + version[i] = random_version();
> + expected_version[i] = version[i];
> + }
> +
> + offset = paddr / ADI_BLKSZ;
> +
> + ret = pwrite_adi(fd, version, sizeof(version), offset);
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + ret = pread_adi(fd, version, sizeof(version), offset);
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + for (i = 0; i < TEST3_VERSION_SZ; i++) {
> + if (expected_version[i] != version[i]) {
> + DEBUG_PRINT_L2(
> + "\tExpected version %d but read version %d\n",
> + expected_version, version[0]);
> + TEST_STEP_FAILURE(-expected_version[i]);
> + }
> + }
> +
> + ret = 0;
> +out:
> + RETURN_FROM_TEST(ret);
> +}
> +
> +static int test4_lseek(int fd)
> +{
> +#define OFFSET_ADD (0x100)
> +#define OFFSET_SUBTRACT (0xFFFFFFF000000000)
> +
> + off_t offset_out, offset_in;
> + int ret;
> +
> +
> + offset_in = 0x123456789abcdef0;
> + offset_out = seek_adi(fd, offset_in, SEEK_SET);
> + if (offset_out != offset_in) {
> + ret = -1;
> + TEST_STEP_FAILURE(ret);
> + }
> +
> + /* seek to the current offset. this should return EINVAL */
> + offset_out = seek_adi(fd, offset_in, SEEK_SET);
> + if (offset_out < 0 && errno == EINVAL)
> + DEBUG_PRINT_L2(
> + "\tSEEK_SET failed as designed. Not an error\n");
> + else {
> + ret = -2;
> + TEST_STEP_FAILURE(ret);
> + }
> +
> + offset_out = seek_adi(fd, 0, SEEK_CUR);
> + if (offset_out != offset_in) {
> + ret = -3;
> + TEST_STEP_FAILURE(ret);
> + }
> +
> + offset_out = seek_adi(fd, OFFSET_ADD, SEEK_CUR);
> + if (offset_out != (offset_in + OFFSET_ADD)) {
> + ret = -4;
> + TEST_STEP_FAILURE(ret);
> + }
> +
> + offset_out = seek_adi(fd, OFFSET_SUBTRACT, SEEK_CUR);
> + if (offset_out != (offset_in + OFFSET_ADD + OFFSET_SUBTRACT)) {
> + ret = -5;
> + TEST_STEP_FAILURE(ret);
> + }
> +
> + ret = 0;
> +out:
> + RETURN_FROM_TEST(ret);
> +}
> +
> +static int test5_rw_aligned_1byte(int fd)
> +{
> + /* somewhat arbitrarily chosen address */
> + unsigned long paddr =
> + (end_addr[range_count - 1] - 0xF000) & ~(ADI_BLKSZ - 1);
> + unsigned char version, expected_version;
> + loff_t offset;
> + off_t oret;
> + int ret;
> +
> + offset = paddr / ADI_BLKSZ;
> + version = expected_version = random_version();
> +
> + oret = seek_adi(fd, offset, SEEK_SET);
> + if (oret != offset) {
> + ret = -1;
> + TEST_STEP_FAILURE(ret);
> + }
> +
> + ret = write_adi(fd, &version, sizeof(version));
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + oret = seek_adi(fd, offset, SEEK_SET);
> + if (oret != offset) {
> + ret = -1;
> + TEST_STEP_FAILURE(ret);
> + }
> +
> + ret = read_adi(fd, &version, sizeof(version));
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + if (expected_version != version) {
> + DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",
> + expected_version, version);
> + TEST_STEP_FAILURE(-expected_version);
> + }
> +
> + ret = 0;
> +out:
> + RETURN_FROM_TEST(ret);
> +}
> +
> +#define TEST6_VERSION_SZ 9434
> +static int test6_rw_aligned_9434bytes(int fd)
> +{
> + /* somewhat arbitrarily chosen address */
> + unsigned long paddr =
> + (end_addr[range_count - 1] - 0x5F000) & ~(ADI_BLKSZ - 1);
> + unsigned char version[TEST6_VERSION_SZ],
> + expected_version[TEST6_VERSION_SZ];
> + loff_t offset;
> + off_t oret;
> + int ret, i;
> +
> + offset = paddr / ADI_BLKSZ;
> + for (i = 0; i < TEST6_VERSION_SZ; i++)
> + version[i] = expected_version[i] = random_version();
> +
> + oret = seek_adi(fd, offset, SEEK_SET);
> + if (oret != offset) {
> + ret = -1;
> + TEST_STEP_FAILURE(ret);
> + }
> +
> + ret = write_adi(fd, version, sizeof(version));
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + memset(version, 0, TEST6_VERSION_SZ);
> +
> + oret = seek_adi(fd, offset, SEEK_SET);
> + if (oret != offset) {
> + ret = -1;
> + TEST_STEP_FAILURE(ret);
> + }
> +
> + ret = read_adi(fd, version, sizeof(version));
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + for (i = 0; i < TEST6_VERSION_SZ; i++) {
> + if (expected_version[i] != version[i]) {
> + DEBUG_PRINT_L2(
> + "\tExpected version %d but read version %d\n",
> + expected_version[i], version[i]);
> + TEST_STEP_FAILURE(-expected_version[i]);
> + }
> + }
> +
> + ret = 0;
> +out:
> + RETURN_FROM_TEST(ret);
> +}
> +
> +#define TEST7_VERSION_SZ 14963
> +static int test7_rw_aligned_14963bytes(int fd)
> +{
> + /* somewhat arbitrarily chosen address */
> + unsigned long paddr =
> + ((start_addr[range_count - 1] + 0xF000) & ~(ADI_BLKSZ - 1)) + 39;
> + unsigned char version[TEST7_VERSION_SZ],
> + expected_version[TEST7_VERSION_SZ];
> + loff_t offset;
> + off_t oret;
> + int ret, i;
> +
> + offset = paddr / ADI_BLKSZ;
> + for (i = 0; i < TEST7_VERSION_SZ; i++) {
> + version[i] = random_version();
> + expected_version[i] = version[i];
> + }
> +
> + oret = seek_adi(fd, offset, SEEK_SET);
> + if (oret != offset) {
> + ret = -1;
> + TEST_STEP_FAILURE(ret);
> + }
> +
> + ret = write_adi(fd, version, sizeof(version));
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + memset(version, 0, TEST7_VERSION_SZ);
> +
> + oret = seek_adi(fd, offset, SEEK_SET);
> + if (oret != offset) {
> + ret = -1;
> + TEST_STEP_FAILURE(ret);
> + }
> +
> + ret = read_adi(fd, version, sizeof(version));
> + if (ret != sizeof(version))
> + TEST_STEP_FAILURE(ret);
> +
> + for (i = 0; i < TEST7_VERSION_SZ; i++) {
> + if (expected_version[i] != version[i]) {
> + DEBUG_PRINT_L2(
> + "\tExpected version %d but read version %d\n",
> + expected_version[i], version[i]);
> + TEST_STEP_FAILURE(-expected_version[i]);
> + }
> +
> + paddr += ADI_BLKSZ;
> + }
> +
> + ret = 0;
> +out:
> + RETURN_FROM_TEST(ret);
> +}
> +
> +static int (*tests[])(int fd) = {
> + test0_prpw_aligned_1byte,
> + test1_prpw_aligned_4096bytes,
> + test2_prpw_aligned_10327bytes,
> + test3_prpw_unaligned_12541bytes,
> + test4_lseek,
> + test5_rw_aligned_1byte,
> + test6_rw_aligned_9434bytes,
> + test7_rw_aligned_14963bytes,
> +};
> +#define TEST_COUNT ARRAY_SIZE(tests)
> +
> +int main(int argc, char *argv[])
> +{
> + int fd, ret, test;
> +
> + ret = build_memory_map();
> + if (ret < 0)
> + return ret;
> +
> + fd = open("/dev/adi", O_RDWR);
> + if (fd < 0) {
> + fprintf(stderr, "open: error %d: %s\n",
> + errno, strerror(errno));
> + return -errno;
> + }
> +
> + for (test = 0; test < TEST_COUNT; test++) {
> + DEBUG_PRINT_L1("Running test #%d\n", test);
> +
> + ret = (*tests[test])(fd);
> + if (ret != 0)
> + ksft_test_result_fail("Test #%d failed: error %d\n",
> + test, ret);
> + else
> + ksft_test_result_pass("Test #%d passed\n", test);
> + }
> +
> + print_stats();
> + close(fd);
> +
> + if (ksft_get_fail_cnt() > 0)
> + ksft_exit_fail();
> + else
> + ksft_exit_pass();
> +
> + /* it's impossible to get here, but the compiler throws a warning
> + * about control reaching the end of non-void function. bah.
> + */
> + return 0;
> +}
> diff --git a/tools/testing/selftests/sparc64/drivers/drivers_test.sh b/tools/testing/selftests/sparc64/drivers/drivers_test.sh
> new file mode 100755
> index 000000000000..6d08273b7532
> --- /dev/null
> +++ b/tools/testing/selftests/sparc64/drivers/drivers_test.sh
> @@ -0,0 +1,30 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0
> +
> +SRC_TREE=../../../../
> +
> +test_run()
> +{
> + if [ -f ${SRC_TREE}/drivers/char/adi.ko ]; then
> + insmod ${SRC_TREE}/drivers/char/adi.ko 2> /dev/null
> + if [ $? -ne 0 ]; then
> + rc=1
> + fi
> + else
> + # Use modprobe dry run to check for missing adi module
> + if ! /sbin/modprobe -q -n adi; then
> + echo "adi: [SKIP]"
> + elif /sbin/modprobe -q adi; then
> + echo "adi: ok"
> + else
> + echo "adi: [FAIL]"
> + rc=1
> + fi
> + fi
> + ./adi-test
> + rmmod adi 2> /dev/null
> +}
> +
> +rc=0
> +test_run
> +exit $rc
> diff --git a/tools/testing/selftests/sparc64/run.sh b/tools/testing/selftests/sparc64/run.sh
> new file mode 100755
> index 000000000000..38ad61f9328e
> --- /dev/null
> +++ b/tools/testing/selftests/sparc64/run.sh
> @@ -0,0 +1,3 @@
> +#!/bin/sh
> +
> +(cd drivers; ./drivers_test.sh)


2018-04-20 18:17:45

by Tom Hromatka

[permalink] [raw]
Subject: Re: [PATCH v2 2/2] selftests: sparc64: char: Selftest for privileged ADI driver

Doggonit!  Thanks, Wim.

I'll send out a new revision shortly.

Tom



On 04/20/2018 12:08 PM, Wim Coekaerts wrote:
> Tom, you used the wrong GPL license header. Please fix that to be v2
> not v3.
>
> The
>
> +# SPDX-License-Identifier: GPL-2.0
>
> is correct but the adi-test.c one is not.
>
> On 04/20/2018 10:34 AM, Tom Hromatka wrote:
>> Add a selftest for the sparc64 privileged ADI driver.  These
>> tests verify the read(), pread(), write(), pwrite(), and seek()
>> functionality of the driver.  The tests also report simple
>> performance statistics:
>>
>>          Syscall Call    AvgTime AvgSize
>>                  Count   (ticks) (bytes)
>>          -------------------------------
>>          read          3  119638    8133
>>          pread         4  118164    6741
>>          write         3  339442    8133
>>          pwrite        4  280134    6741
>>          seek         10    2919       0
>>          Pass 8 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
>>
>> Signed-off-by: Tom Hromatka <[email protected]>
>> Reviewed-by: Allen Pais <[email protected]>
>> ---
>>   tools/testing/selftests/Makefile                   |   1 +
>>   tools/testing/selftests/sparc64/Makefile           |  46 ++
>>   tools/testing/selftests/sparc64/drivers/.gitignore |   1 +
>>   tools/testing/selftests/sparc64/drivers/Makefile   |  15 +
>>   tools/testing/selftests/sparc64/drivers/adi-test.c | 732
>> +++++++++++++++++++++
>>   .../selftests/sparc64/drivers/drivers_test.sh      |  30 +
>>   tools/testing/selftests/sparc64/run.sh             |   3 +
>>   7 files changed, 828 insertions(+)
>>   create mode 100644 tools/testing/selftests/sparc64/Makefile
>>   create mode 100644 tools/testing/selftests/sparc64/drivers/.gitignore
>>   create mode 100644 tools/testing/selftests/sparc64/drivers/Makefile
>>   create mode 100644 tools/testing/selftests/sparc64/drivers/adi-test.c
>>   create mode 100755
>> tools/testing/selftests/sparc64/drivers/drivers_test.sh
>>   create mode 100755 tools/testing/selftests/sparc64/run.sh
>>
>> diff --git a/tools/testing/selftests/Makefile
>> b/tools/testing/selftests/Makefile
>> index 7442dfb73b7f..94da632579e7 100644
>> --- a/tools/testing/selftests/Makefile
>> +++ b/tools/testing/selftests/Makefile
>> @@ -28,6 +28,7 @@ TARGETS += ptrace
>>   TARGETS += seccomp
>>   TARGETS += sigaltstack
>>   TARGETS += size
>> +TARGETS += sparc64
>>   TARGETS += splice
>>   TARGETS += static_keys
>>   TARGETS += sync
>> diff --git a/tools/testing/selftests/sparc64/Makefile
>> b/tools/testing/selftests/sparc64/Makefile
>> new file mode 100644
>> index 000000000000..2082eeffd779
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/Makefile
>> @@ -0,0 +1,46 @@
>> +SUBDIRS := drivers
>> +
>> +TEST_PROGS := run.sh
>> +
>> +.PHONY: all clean
>> +
>> +include ../lib.mk
>> +
>> +all:
>> +    @for DIR in $(SUBDIRS); do        \
>> +        BUILD_TARGET=$(OUTPUT)/$$DIR;    \
>> +        mkdir $$BUILD_TARGET  -p;    \
>> +        make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
>> +        #SUBDIR test prog name should be in the form: SUBDIR_test.sh \
>> +        TEST=$$DIR"_test.sh"; \
>> +        if [ -e $$DIR/$$TEST ]; then \
>> +            rsync -a $$DIR/$$TEST $$BUILD_TARGET/; \
>> +        fi \
>> +    done
>> +
>> +override define RUN_TESTS
>> +    @cd $(OUTPUT); ./run.sh
>> +endef
>> +
>> +override define INSTALL_RULE
>> +    mkdir -p $(INSTALL_PATH)
>> +    install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED)
>> $(TEST_FILES)
>> +
>> +    @for SUBDIR in $(SUBDIRS); do \
>> +        BUILD_TARGET=$(OUTPUT)/$$SUBDIR;    \
>> +        mkdir $$BUILD_TARGET  -p;    \
>> +        $(MAKE) OUTPUT=$$BUILD_TARGET -C $$SUBDIR
>> INSTALL_PATH=$(INSTALL_PATH)/$$SUBDIR install; \
>> +    done;
>> +endef
>> +
>> +override define EMIT_TESTS
>> +    echo "./run.sh"
>> +endef
>> +
>> +override define CLEAN
>> +    @for DIR in $(SUBDIRS); do        \
>> +        BUILD_TARGET=$(OUTPUT)/$$DIR;    \
>> +        mkdir $$BUILD_TARGET  -p;    \
>> +        make OUTPUT=$$BUILD_TARGET -C $$DIR $@;\
>> +    done
>> +endef
>> diff --git a/tools/testing/selftests/sparc64/drivers/.gitignore
>> b/tools/testing/selftests/sparc64/drivers/.gitignore
>> new file mode 100644
>> index 000000000000..90e835ed74e6
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/drivers/.gitignore
>> @@ -0,0 +1 @@
>> +adi-test
>> diff --git a/tools/testing/selftests/sparc64/drivers/Makefile
>> b/tools/testing/selftests/sparc64/drivers/Makefile
>> new file mode 100644
>> index 000000000000..6264f40bbdbc
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/drivers/Makefile
>> @@ -0,0 +1,15 @@
>> +
>> +INCLUDEDIR := -I.
>> +CFLAGS := $(CFLAGS) $(INCLUDEDIR) -Wall -O2 -g
>> +
>> +TEST_GEN_FILES := adi-test
>> +
>> +all: $(TEST_GEN_FILES)
>> +
>> +$(TEST_GEN_FILES): adi-test.c
>> +
>> +TEST_PROGS := drivers_test.sh
>> +
>> +include ../../lib.mk
>> +
>> +$(OUTPUT)/adi-test: adi-test.c
>> diff --git a/tools/testing/selftests/sparc64/drivers/adi-test.c
>> b/tools/testing/selftests/sparc64/drivers/adi-test.c
>> new file mode 100644
>> index 000000000000..22ffd06fba24
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/drivers/adi-test.c
>> @@ -0,0 +1,732 @@
>> +/*
>> + * Copyright (c) 2017, 2018, Oracle and/or its affiliates. All
>> rights reserved.
>> + * Author: Tom Hromatka <[email protected]>
>> + *
>> + * This program is free software: you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation, either version 3 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program.  If not, see
>> <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/kernel.h>
>> +#include <errno.h>
>> +#include <fcntl.h>
>> +#include <stdarg.h>
>> +#include <stdio.h>
>> +#include <stdlib.h>
>> +#include <string.h>
>> +#include <sys/syscall.h>
>> +#include <sys/types.h>
>> +#include <sys/stat.h>
>> +#include <unistd.h>
>> +
>> +#include "../../kselftest.h"
>> +
>> +#define DEBUG_LEVEL_1_BIT    (0x0001)
>> +#define DEBUG_LEVEL_2_BIT    (0x0002)
>> +#define DEBUG_LEVEL_3_BIT    (0x0004)
>> +#define DEBUG_LEVEL_4_BIT    (0x0008)
>> +#define DEBUG_TIMING_BIT    (0x1000)
>> +
>> +#ifndef ARRAY_SIZE
>> +# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
>> +#endif
>> +
>> +/* bit mask of enabled bits to print */
>> +#define DEBUG 0x0001
>> +
>> +#define DEBUG_PRINT_L1(...)    debug_print(DEBUG_LEVEL_1_BIT,
>> __VA_ARGS__)
>> +#define DEBUG_PRINT_L2(...)    debug_print(DEBUG_LEVEL_2_BIT,
>> __VA_ARGS__)
>> +#define DEBUG_PRINT_L3(...)    debug_print(DEBUG_LEVEL_3_BIT,
>> __VA_ARGS__)
>> +#define DEBUG_PRINT_L4(...)    debug_print(DEBUG_LEVEL_4_BIT,
>> __VA_ARGS__)
>> +#define DEBUG_PRINT_T(...)    debug_print(DEBUG_TIMING_BIT,
>> __VA_ARGS__)
>> +
>> +static void debug_print(int level, const char *s, ...)
>> +{
>> +    va_list args;
>> +
>> +    va_start(args, s);
>> +
>> +    if (DEBUG & level)
>> +        vfprintf(stdout, s, args);
>> +    va_end(args);
>> +}
>> +
>> +#ifndef min
>> +#define min(x, y) ((x) < (y) ? x : y)
>> +#endif
>> +
>> +#define RETURN_FROM_TEST(_ret) \
>> +    do { \
>> +        DEBUG_PRINT_L1( \
>> +            "\tTest %s returned %d\n", __func__, _ret); \
>> +        return _ret; \
>> +    } while (0)
>> +
>> +#define ADI_BLKSZ    64
>> +#define ADI_MAX_VERSION    15
>> +
>> +#define TEST_STEP_FAILURE(_ret) \
>> +    do { \
>> +        fprintf(stderr, "\tTest step failure: %d at %s:%d\n", \
>> +            _ret, __func__, __LINE__); \
>> +        goto out; \
>> +    } while (0)
>> +
>> +#define RDTICK(_x) \
>> +    asm volatile(" rd %%tick, %0\n" : "=r" (_x))
>> +
>> +static int random_version(void)
>> +{
>> +    long tick;
>> +
>> +    RDTICK(tick);
>> +
>> +    return tick % (ADI_MAX_VERSION + 1);
>> +}
>> +
>> +#define MAX_RANGES_SUPPORTED    5
>> +static const char system_ram_str[] = "System RAM\n";
>> +static int range_count;
>> +static unsigned long long int start_addr[MAX_RANGES_SUPPORTED];
>> +static unsigned long long int   end_addr[MAX_RANGES_SUPPORTED];
>> +
>> +struct stats {
>> +    char        name[16];
>> +    unsigned long    total;
>> +    unsigned long    count;
>> +    unsigned long    bytes;
>> +};
>> +
>> +static struct stats read_stats = {
>> +    .name = "read", .total = 0, .count = 0, .bytes = 0};
>> +static struct stats pread_stats = {
>> +    .name = "pread", .total = 0, .count = 0, .bytes = 0};
>> +static struct stats write_stats = {
>> +    .name = "write", .total = 0, .count = 0, .bytes = 0};
>> +static struct stats pwrite_stats = {
>> +    .name = "pwrite", .total = 0, .count = 0, .bytes = 0};
>> +static struct stats seek_stats = {
>> +    .name = "seek", .total = 0, .count = 0, .bytes = 0};
>> +
>> +static void update_stats(struct stats * const ustats,
>> +             unsigned long measurement, unsigned long bytes)
>> +{
>> +    ustats->total += measurement;
>> +    ustats->bytes += bytes;
>> +    ustats->count++;
>> +}
>> +
>> +static void print_ustats(const struct stats * const ustats)
>> +{
>> +    DEBUG_PRINT_L1("%s\t%7d\t%7.0f\t%7.0f\n",
>> +               ustats->name, ustats->count,
>> +               (float)ustats->total / (float)ustats->count,
>> +               (float)ustats->bytes / (float)ustats->count);
>> +}
>> +
>> +static void print_stats(void)
>> +{
>> +    DEBUG_PRINT_L1("\nSyscall\tCall\tAvgTime\tAvgSize\n"
>> +               "\tCount\t(ticks)\t(bytes)\n"
>> +               "-------------------------------\n");
>> +
>> +    print_ustats(&read_stats);
>> +    print_ustats(&pread_stats);
>> +    print_ustats(&write_stats);
>> +    print_ustats(&pwrite_stats);
>> +    print_ustats(&seek_stats);
>> +}
>> +
>> +static int build_memory_map(void)
>> +{
>> +    char line[256];
>> +    FILE *fp;
>> +    int i;
>> +
>> +    range_count = 0;
>> +
>> +    fp = fopen("/proc/iomem", "r");
>> +    if (!fp) {
>> +        fprintf(stderr, "/proc/iomem: error %d: %s\n",
>> +            errno, strerror(errno));
>> +        return -errno;
>> +    }
>> +
>> +    while (fgets(line, sizeof(line), fp) != 0) {
>> +        if (strstr(line, system_ram_str)) {
>> +            char *dash, *end_ptr;
>> +
>> +            /* Given a line like this:
>> +             * d0400000-10ffaffff : System RAM
>> +             * replace the "-" with a space
>> +             */
>> +            dash = strstr(line, "-");
>> +            dash[0] = 0x20;
>> +
>> +            start_addr[range_count] = strtoull(line, &end_ptr, 16);
>> +            end_addr[range_count] = strtoull(end_ptr, NULL, 16);
>> +            range_count++;
>> +        }
>> +    }
>> +
>> +    fclose(fp);
>> +
>> +    DEBUG_PRINT_L1("RAM Ranges\n");
>> +    for (i = 0; i < range_count; i++)
>> +        DEBUG_PRINT_L1("\trange %d: 0x%llx\t- 0x%llx\n",
>> +                   i, start_addr[i], end_addr[i]);
>> +
>> +    if (range_count == 0) {
>> +        fprintf(stderr, "No valid address ranges found. Error.\n");
>> +        return -1;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static int read_adi(int fd, unsigned char *buf, int buf_sz)
>> +{
>> +    int ret, bytes_read = 0;
>> +    long start, end, elapsed_time = 0;
>> +
>> +    do {
>> +        RDTICK(start);
>> +        ret = read(fd, buf + bytes_read, buf_sz - bytes_read);
>> +        RDTICK(end);
>> +        if (ret < 0)
>> +            return -errno;
>> +
>> +        elapsed_time += end - start;
>> +        update_stats(&read_stats, elapsed_time, buf_sz);
>> +        bytes_read += ret;
>> +
>> +    } while (bytes_read < buf_sz);
>> +
>> +    DEBUG_PRINT_T("\tread elapsed timed = %ld\n", elapsed_time);
>> +    DEBUG_PRINT_L3("\tRead  %d bytes\n", bytes_read);
>> +
>> +    return bytes_read;
>> +}
>> +
>> +static int pread_adi(int fd, unsigned char *buf,
>> +             int buf_sz, unsigned long offset)
>> +{
>> +    int ret, i, bytes_read = 0;
>> +    unsigned long cur_offset;
>> +    long start, end, elapsed_time = 0;
>> +
>> +    cur_offset = offset;
>> +    do {
>> +        RDTICK(start);
>> +        ret = pread(fd, buf + bytes_read, buf_sz - bytes_read,
>> +                cur_offset);
>> +        RDTICK(end);
>> +        if (ret < 0)
>> +            return -errno;
>> +
>> +        elapsed_time += end - start;
>> +        update_stats(&pread_stats, elapsed_time, buf_sz);
>> +        bytes_read += ret;
>> +        cur_offset += ret;
>> +
>> +    } while (bytes_read < buf_sz);
>> +
>> +    DEBUG_PRINT_T("\tpread elapsed timed = %ld\n", elapsed_time);
>> +    DEBUG_PRINT_L3("\tRead  %d bytes starting at offset 0x%lx\n",
>> +               bytes_read, offset);
>> +    for (i = 0; i < bytes_read; i++)
>> +        DEBUG_PRINT_L4("\t\t0x%lx\t%d\n", offset + i, buf[i]);
>> +
>> +    return bytes_read;
>> +}
>> +
>> +static int write_adi(int fd, const unsigned char * const buf, int
>> buf_sz)
>> +{
>> +    int ret, bytes_written = 0;
>> +    long start, end, elapsed_time = 0;
>> +
>> +    do {
>> +        RDTICK(start);
>> +        ret = write(fd, buf + bytes_written, buf_sz - bytes_written);
>> +        RDTICK(end);
>> +        if (ret < 0)
>> +            return -errno;
>> +
>> +        elapsed_time += (end - start);
>> +        update_stats(&write_stats, elapsed_time, buf_sz);
>> +        bytes_written += ret;
>> +    } while (bytes_written < buf_sz);
>> +
>> +    DEBUG_PRINT_T("\twrite elapsed timed = %ld\n", elapsed_time);
>> +    DEBUG_PRINT_L3("\tWrote %d of %d bytes\n", bytes_written, buf_sz);
>> +
>> +    return bytes_written;
>> +}
>> +
>> +static int pwrite_adi(int fd, const unsigned char * const buf,
>> +              int buf_sz, unsigned long offset)
>> +{
>> +    int ret, bytes_written = 0;
>> +    unsigned long cur_offset;
>> +    long start, end, elapsed_time = 0;
>> +
>> +    cur_offset = offset;
>> +
>> +    do {
>> +        RDTICK(start);
>> +        ret = pwrite(fd, buf + bytes_written,
>> +                 buf_sz - bytes_written, cur_offset);
>> +        RDTICK(end);
>> +        if (ret < 0) {
>> +            fprintf(stderr, "pwrite(): error %d: %s\n",
>> +                errno, strerror(errno));
>> +            return -errno;
>> +        }
>> +
>> +        elapsed_time += (end - start);
>> +        update_stats(&pwrite_stats, elapsed_time, buf_sz);
>> +        bytes_written += ret;
>> +        cur_offset += ret;
>> +
>> +    } while (bytes_written < buf_sz);
>> +
>> +    DEBUG_PRINT_T("\tpwrite elapsed timed = %ld\n", elapsed_time);
>> +    DEBUG_PRINT_L3("\tWrote %d of %d bytes starting at address
>> 0x%lx\n",
>> +               bytes_written, buf_sz, offset);
>> +
>> +    return bytes_written;
>> +}
>> +
>> +static off_t seek_adi(int fd, off_t offset, int whence)
>> +{
>> +    long start, end;
>> +    off_t ret;
>> +
>> +    RDTICK(start);
>> +    ret = lseek(fd, offset, whence);
>> +    RDTICK(end);
>> +    DEBUG_PRINT_L2("\tlseek ret = 0x%llx\n", ret);
>> +    if (ret < 0)
>> +        goto out;
>> +
>> +    DEBUG_PRINT_T("\tlseek elapsed timed = %ld\n", end - start);
>> +    update_stats(&seek_stats, end - start, 0);
>> +
>> +out:
>> +    (void)lseek(fd, 0, SEEK_END);
>> +    return ret;
>> +}
>> +
>> +static int test0_prpw_aligned_1byte(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        (end_addr[range_count - 1] - 0x1000) & ~(ADI_BLKSZ - 1);
>> +    unsigned char version[1], expected_version;
>> +    loff_t offset;
>> +    int ret;
>> +
>> +    version[0] = random_version();
>> +    expected_version = version[0];
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +
>> +    ret = pwrite_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    ret = pread_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    if (expected_version != version[0]) {
>> +        DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",
>> +                   expected_version, version[0]);
>> +        TEST_STEP_FAILURE(-expected_version);
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +#define TEST1_VERSION_SZ    4096
>> +static int test1_prpw_aligned_4096bytes(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        (end_addr[range_count - 1] - 0x6000) & ~(ADI_BLKSZ - 1);
>> +    unsigned char version[TEST1_VERSION_SZ],
>> +        expected_version[TEST1_VERSION_SZ];
>> +    loff_t offset;
>> +    int ret, i;
>> +
>> +    for (i = 0; i < TEST1_VERSION_SZ; i++) {
>> +        version[i] = random_version();
>> +        expected_version[i] = version[i];
>> +    }
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +
>> +    ret = pwrite_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    ret = pread_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    for (i = 0; i < TEST1_VERSION_SZ; i++) {
>> +        if (expected_version[i] != version[i]) {
>> +            DEBUG_PRINT_L2(
>> +                "\tExpected version %d but read version %d\n",
>> +                expected_version, version[0]);
>> +            TEST_STEP_FAILURE(-expected_version[i]);
>> +        }
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +#define TEST2_VERSION_SZ    10327
>> +static int test2_prpw_aligned_10327bytes(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        (start_addr[0] + 0x6000) & ~(ADI_BLKSZ - 1);
>> +    unsigned char version[TEST2_VERSION_SZ],
>> +        expected_version[TEST2_VERSION_SZ];
>> +    loff_t offset;
>> +    int ret, i;
>> +
>> +    for (i = 0; i < TEST2_VERSION_SZ; i++) {
>> +        version[i] = random_version();
>> +        expected_version[i] = version[i];
>> +    }
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +
>> +    ret = pwrite_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    ret = pread_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    for (i = 0; i < TEST2_VERSION_SZ; i++) {
>> +        if (expected_version[i] != version[i]) {
>> +            DEBUG_PRINT_L2(
>> +                "\tExpected version %d but read version %d\n",
>> +                expected_version, version[0]);
>> +            TEST_STEP_FAILURE(-expected_version[i]);
>> +        }
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +#define TEST3_VERSION_SZ    12541
>> +static int test3_prpw_unaligned_12541bytes(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        ((start_addr[0] + 0xC000) & ~(ADI_BLKSZ - 1)) + 17;
>> +    unsigned char version[TEST3_VERSION_SZ],
>> +        expected_version[TEST3_VERSION_SZ];
>> +    loff_t offset;
>> +    int ret, i;
>> +
>> +    for (i = 0; i < TEST3_VERSION_SZ; i++) {
>> +        version[i] = random_version();
>> +        expected_version[i] = version[i];
>> +    }
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +
>> +    ret = pwrite_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    ret = pread_adi(fd, version, sizeof(version), offset);
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    for (i = 0; i < TEST3_VERSION_SZ; i++) {
>> +        if (expected_version[i] != version[i]) {
>> +            DEBUG_PRINT_L2(
>> +                "\tExpected version %d but read version %d\n",
>> +                expected_version, version[0]);
>> +            TEST_STEP_FAILURE(-expected_version[i]);
>> +        }
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +static int test4_lseek(int fd)
>> +{
>> +#define    OFFSET_ADD    (0x100)
>> +#define OFFSET_SUBTRACT    (0xFFFFFFF000000000)
>> +
>> +    off_t offset_out, offset_in;
>> +    int ret;
>> +
>> +
>> +    offset_in = 0x123456789abcdef0;
>> +    offset_out = seek_adi(fd, offset_in, SEEK_SET);
>> +    if (offset_out != offset_in) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    /* seek to the current offset.  this should return EINVAL */
>> +    offset_out = seek_adi(fd, offset_in, SEEK_SET);
>> +    if (offset_out < 0 && errno == EINVAL)
>> +        DEBUG_PRINT_L2(
>> +            "\tSEEK_SET failed as designed. Not an error\n");
>> +    else {
>> +        ret = -2;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    offset_out = seek_adi(fd, 0, SEEK_CUR);
>> +    if (offset_out != offset_in) {
>> +        ret = -3;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    offset_out = seek_adi(fd, OFFSET_ADD, SEEK_CUR);
>> +    if (offset_out != (offset_in + OFFSET_ADD)) {
>> +        ret = -4;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    offset_out = seek_adi(fd, OFFSET_SUBTRACT, SEEK_CUR);
>> +    if (offset_out != (offset_in + OFFSET_ADD + OFFSET_SUBTRACT)) {
>> +        ret = -5;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +static int test5_rw_aligned_1byte(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        (end_addr[range_count - 1] - 0xF000) & ~(ADI_BLKSZ - 1);
>> +    unsigned char version, expected_version;
>> +    loff_t offset;
>> +    off_t oret;
>> +    int ret;
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +    version = expected_version = random_version();
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = write_adi(fd, &version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = read_adi(fd, &version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    if (expected_version != version) {
>> +        DEBUG_PRINT_L2("\tExpected version %d but read version %d\n",
>> +                   expected_version, version);
>> +        TEST_STEP_FAILURE(-expected_version);
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +#define TEST6_VERSION_SZ        9434
>> +static int test6_rw_aligned_9434bytes(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +        (end_addr[range_count - 1] - 0x5F000) & ~(ADI_BLKSZ - 1);
>> +    unsigned char version[TEST6_VERSION_SZ],
>> +              expected_version[TEST6_VERSION_SZ];
>> +    loff_t offset;
>> +    off_t oret;
>> +    int ret, i;
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +    for (i = 0; i < TEST6_VERSION_SZ; i++)
>> +        version[i] = expected_version[i] = random_version();
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = write_adi(fd, version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    memset(version, 0, TEST6_VERSION_SZ);
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = read_adi(fd, version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    for (i = 0; i < TEST6_VERSION_SZ; i++) {
>> +        if (expected_version[i] != version[i]) {
>> +            DEBUG_PRINT_L2(
>> +                "\tExpected version %d but read version %d\n",
>> +                expected_version[i], version[i]);
>> +            TEST_STEP_FAILURE(-expected_version[i]);
>> +        }
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +#define TEST7_VERSION_SZ        14963
>> +static int test7_rw_aligned_14963bytes(int fd)
>> +{
>> +    /* somewhat arbitrarily chosen address */
>> +    unsigned long paddr =
>> +      ((start_addr[range_count - 1] + 0xF000) & ~(ADI_BLKSZ - 1)) + 39;
>> +    unsigned char version[TEST7_VERSION_SZ],
>> +              expected_version[TEST7_VERSION_SZ];
>> +    loff_t offset;
>> +    off_t oret;
>> +    int ret, i;
>> +
>> +    offset = paddr / ADI_BLKSZ;
>> +    for (i = 0; i < TEST7_VERSION_SZ; i++) {
>> +        version[i] = random_version();
>> +        expected_version[i] = version[i];
>> +    }
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = write_adi(fd, version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    memset(version, 0, TEST7_VERSION_SZ);
>> +
>> +    oret = seek_adi(fd, offset, SEEK_SET);
>> +    if (oret != offset) {
>> +        ret = -1;
>> +        TEST_STEP_FAILURE(ret);
>> +    }
>> +
>> +    ret = read_adi(fd, version, sizeof(version));
>> +    if (ret != sizeof(version))
>> +        TEST_STEP_FAILURE(ret);
>> +
>> +    for (i = 0; i < TEST7_VERSION_SZ; i++) {
>> +        if (expected_version[i] != version[i]) {
>> +            DEBUG_PRINT_L2(
>> +                "\tExpected version %d but read version %d\n",
>> +                expected_version[i], version[i]);
>> +            TEST_STEP_FAILURE(-expected_version[i]);
>> +        }
>> +
>> +        paddr += ADI_BLKSZ;
>> +    }
>> +
>> +    ret = 0;
>> +out:
>> +    RETURN_FROM_TEST(ret);
>> +}
>> +
>> +static int (*tests[])(int fd) = {
>> +    test0_prpw_aligned_1byte,
>> +    test1_prpw_aligned_4096bytes,
>> +    test2_prpw_aligned_10327bytes,
>> +    test3_prpw_unaligned_12541bytes,
>> +    test4_lseek,
>> +    test5_rw_aligned_1byte,
>> +    test6_rw_aligned_9434bytes,
>> +    test7_rw_aligned_14963bytes,
>> +};
>> +#define TEST_COUNT    ARRAY_SIZE(tests)
>> +
>> +int main(int argc, char *argv[])
>> +{
>> +    int fd, ret, test;
>> +
>> +    ret = build_memory_map();
>> +    if (ret < 0)
>> +        return ret;
>> +
>> +    fd = open("/dev/adi", O_RDWR);
>> +    if (fd < 0) {
>> +        fprintf(stderr, "open: error %d: %s\n",
>> +            errno, strerror(errno));
>> +        return -errno;
>> +    }
>> +
>> +    for (test = 0; test < TEST_COUNT; test++) {
>> +        DEBUG_PRINT_L1("Running test #%d\n", test);
>> +
>> +        ret = (*tests[test])(fd);
>> +        if (ret != 0)
>> +            ksft_test_result_fail("Test #%d failed: error %d\n",
>> +                          test, ret);
>> +        else
>> +            ksft_test_result_pass("Test #%d passed\n", test);
>> +    }
>> +
>> +    print_stats();
>> +    close(fd);
>> +
>> +    if (ksft_get_fail_cnt() > 0)
>> +        ksft_exit_fail();
>> +    else
>> +        ksft_exit_pass();
>> +
>> +    /* it's impossible to get here, but the compiler throws a warning
>> +     * about control reaching the end of non-void function. bah.
>> +     */
>> +    return 0;
>> +}
>> diff --git a/tools/testing/selftests/sparc64/drivers/drivers_test.sh
>> b/tools/testing/selftests/sparc64/drivers/drivers_test.sh
>> new file mode 100755
>> index 000000000000..6d08273b7532
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/drivers/drivers_test.sh
>> @@ -0,0 +1,30 @@
>> +#!/bin/sh
>> +# SPDX-License-Identifier: GPL-2.0
>> +
>> +SRC_TREE=../../../../
>> +
>> +test_run()
>> +{
>> +    if [ -f ${SRC_TREE}/drivers/char/adi.ko ]; then
>> +        insmod ${SRC_TREE}/drivers/char/adi.ko 2> /dev/null
>> +        if [ $? -ne 0 ]; then
>> +            rc=1
>> +        fi
>> +    else
>> +        # Use modprobe dry run to check for missing adi module
>> +        if ! /sbin/modprobe -q -n adi; then
>> +            echo "adi: [SKIP]"
>> +        elif /sbin/modprobe -q adi; then
>> +            echo "adi: ok"
>> +        else
>> +            echo "adi: [FAIL]"
>> +            rc=1
>> +        fi
>> +    fi
>> +    ./adi-test
>> +    rmmod adi 2> /dev/null
>> +}
>> +
>> +rc=0
>> +test_run
>> +exit $rc
>> diff --git a/tools/testing/selftests/sparc64/run.sh
>> b/tools/testing/selftests/sparc64/run.sh
>> new file mode 100755
>> index 000000000000..38ad61f9328e
>> --- /dev/null
>> +++ b/tools/testing/selftests/sparc64/run.sh
>> @@ -0,0 +1,3 @@
>> +#!/bin/sh
>> +
>> +(cd drivers; ./drivers_test.sh)
>