2019-06-12 18:25:58

by Nicolas Saenz Julienne

Subject: [PATCH v4 7/7] arm64: defconfig: enable cpufreq support for RPi3

This enables both the new firmware clock driver and cpufreq driver
available for the RPi3 family of boards.

Signed-off-by: Nicolas Saenz Julienne <[email protected]>
Acked-by: Stefan Wahren <[email protected]>
---

Changes since v2:
- Build both drivers as modules

arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5a8e853833cf..5e322e61b101 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -83,6 +83,7 @@ CONFIG_ACPI_CPPC_CPUFREQ=m
CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
CONFIG_ARM_SCPI_CPUFREQ=y
CONFIG_ARM_IMX_CPUFREQ_DT=m
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
CONFIG_ARM_TEGRA186_CPUFREQ=y
CONFIG_ARM_SCPI_PROTOCOL=y
CONFIG_RASPBERRYPI_FIRMWARE=y
@@ -653,6 +654,7 @@ CONFIG_COMMON_CLK_CS2000_CP=y
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_CLK_QORIQ=y
CONFIG_COMMON_CLK_PWM=y
+CONFIG_CLK_RASPBERRYPI=m
CONFIG_CLK_IMX8MM=y
CONFIG_CLK_IMX8MQ=y
CONFIG_CLK_IMX8QXP=y
--
2.21.0

2019-07-24 02:32:07

by Stefan Wahren

Subject: Re: [PATCH v4 7/7] arm64: defconfig: enable cpufreq support for RPi3

Am 12.06.19 um 20:24 schrieb Nicolas Saenz Julienne:
> This enables both the new firmware clock driver and cpufreq driver
> available for the RPi3 family of boards.
>
> Signed-off-by: Nicolas Saenz Julienne <[email protected]>
> Acked-by: Stefan Wahren <[email protected]>
> ---
>
> Changes since v2:
> - Build both drivers as modules
>
> arch/arm64/configs/defconfig | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 5a8e853833cf..5e322e61b101 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -83,6 +83,7 @@ CONFIG_ACPI_CPPC_CPUFREQ=m
> CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
> CONFIG_ARM_SCPI_CPUFREQ=y
> CONFIG_ARM_IMX_CPUFREQ_DT=m
> +CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
> CONFIG_ARM_TEGRA186_CPUFREQ=y
> CONFIG_ARM_SCPI_PROTOCOL=y
> CONFIG_RASPBERRYPI_FIRMWARE=y
> @@ -653,6 +654,7 @@ CONFIG_COMMON_CLK_CS2000_CP=y
> CONFIG_COMMON_CLK_S2MPS11=y
> CONFIG_CLK_QORIQ=y
> CONFIG_COMMON_CLK_PWM=y
> +CONFIG_CLK_RASPBERRYPI=m
> CONFIG_CLK_IMX8MM=y
> CONFIG_CLK_IMX8MQ=y
> CONFIG_CLK_IMX8QXP=y

Applied to bcm2835-defconfig-64-next

Thanks