From: Xilin Wu <[email protected]>
Add the PWM function to the pmk8550 dtsi, which is usually used
to control PWM backlight on platforms using this PMIC.
Signed-off-by: Xilin Wu <[email protected]>
---
arch/arm64/boot/dts/qcom/pmk8550.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
index c7ac9b2eaacf..8d43fbb85263 100644
--- a/arch/arm64/boot/dts/qcom/pmk8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
@@ -73,5 +73,15 @@ pmk8550_gpios: gpio@8800 {
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ pmk8550_pwm: pwm {
+ compatible = "qcom,pmk8550-pwm";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pwm-cells = <2>;
+
+ status = "disabled";
+ };
};
};
--
2.44.0
On 4/24/24 17:29, Xilin Wu via B4 Relay wrote:
> From: Xilin Wu <[email protected]>
>
> Add the PWM function to the pmk8550 dtsi, which is usually used
> to control PWM backlight on platforms using this PMIC.
>
> Signed-off-by: Xilin Wu <[email protected]>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad