From: Angus Ainslie <[email protected]>
Allow the dw9714 to control a regulator and adjust suspend() and resume()
to support both runtime and system pm.
Signed-off-by: Angus Ainslie <[email protected]>
Signed-off-by: Martin Kepplinger <[email protected]>
---
revision history
----------------
v3: (thank you Mark and Sakari)
* use regulator_get() instead of regulator_get_optional()
v2: (thank you Mark)
* simplify the regulator_get_optional() error path
* fix regulator usage during probe()
https://lore.kernel.org/linux-media/[email protected]/
v1:
https://lore.kernel.org/linux-media/[email protected]/
drivers/media/i2c/dw9714.c | 32 +++++++++++++++++++++++++++++++-
1 file changed, 31 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c
index 3863dfeb8293..81170bbe0e55 100644
--- a/drivers/media/i2c/dw9714.c
+++ b/drivers/media/i2c/dw9714.c
@@ -5,6 +5,7 @@
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-event.h>
@@ -36,6 +37,7 @@ struct dw9714_device {
struct v4l2_ctrl_handler ctrls_vcm;
struct v4l2_subdev sd;
u16 current_val;
+ struct regulator *vcc;
};
static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl *ctrl)
@@ -145,6 +147,16 @@ static int dw9714_probe(struct i2c_client *client)
if (dw9714_dev == NULL)
return -ENOMEM;
+ dw9714_dev->vcc = devm_regulator_get(&client->dev, "vcc");
+ if (IS_ERR(dw9714_dev->vcc))
+ return PTR_ERR(dw9714_dev->vcc);
+
+ rval = regulator_enable(dw9714_dev->vcc);
+ if (rval < 0) {
+ dev_err(&client->dev, "failed to enable vcc: %d\n", rval);
+ return rval;
+ }
+
v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
V4L2_SUBDEV_FL_HAS_EVENTS;
@@ -200,6 +212,9 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
int ret, val;
+ if (pm_runtime_suspended(&client->dev))
+ return 0;
+
for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS - 1);
val >= 0; val -= DW9714_CTRL_STEPS) {
ret = dw9714_i2c_write(client,
@@ -208,7 +223,12 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
dev_err_once(dev, "%s I2C failure: %d", __func__, ret);
usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10);
}
- return 0;
+
+ ret = regulator_disable(dw9714_dev->vcc);
+ if (ret)
+ dev_err(dev, "Failed to disable vcc: %d\n", ret);
+
+ return ret;
}
/*
@@ -224,6 +244,16 @@ static int __maybe_unused dw9714_vcm_resume(struct device *dev)
struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
int ret, val;
+ if (pm_runtime_suspended(&client->dev))
+ return 0;
+
+ ret = regulator_enable(dw9714_dev->vcc);
+ if (ret) {
+ dev_err(dev, "Failed to enable vcc: %d\n", ret);
+ return ret;
+ }
+ usleep_range(1000, 2000);
+
for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
val += DW9714_CTRL_STEPS) {
--
2.30.2
Am Montag, dem 29.11.2021 um 13:07 +0100 schrieb Martin Kepplinger:
> From: Angus Ainslie <[email protected]>
>
> Allow the dw9714 to control a regulator and adjust suspend() and
> resume()
> to support both runtime and system pm.
>
> Signed-off-by: Angus Ainslie <[email protected]>
> Signed-off-by: Martin Kepplinger <[email protected]>
> ---
>
>
> revision history
> ----------------
> v3: (thank you Mark and Sakari)
> * use regulator_get() instead of regulator_get_optional()
>
> v2: (thank you Mark)
> * simplify the regulator_get_optional() error path
> * fix regulator usage during probe()
> https://lore.kernel.org/linux-media/[email protected]/
>
> v1:
> https://lore.kernel.org/linux-media/[email protected]/
>
>
>
> drivers/media/i2c/dw9714.c | 32 +++++++++++++++++++++++++++++++-
> 1 file changed, 31 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c
> index 3863dfeb8293..81170bbe0e55 100644
> --- a/drivers/media/i2c/dw9714.c
> +++ b/drivers/media/i2c/dw9714.c
> @@ -5,6 +5,7 @@
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-device.h>
> #include <media/v4l2-event.h>
> @@ -36,6 +37,7 @@ struct dw9714_device {
> struct v4l2_ctrl_handler ctrls_vcm;
> struct v4l2_subdev sd;
> u16 current_val;
> + struct regulator *vcc;
> };
>
> static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl
> *ctrl)
> @@ -145,6 +147,16 @@ static int dw9714_probe(struct i2c_client
> *client)
> if (dw9714_dev == NULL)
> return -ENOMEM;
>
> + dw9714_dev->vcc = devm_regulator_get(&client->dev, "vcc");
> + if (IS_ERR(dw9714_dev->vcc))
> + return PTR_ERR(dw9714_dev->vcc);
> +
> + rval = regulator_enable(dw9714_dev->vcc);
> + if (rval < 0) {
> + dev_err(&client->dev, "failed to enable vcc: %d\n",
> rval);
> + return rval;
> + }
> +
> v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
> dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> V4L2_SUBDEV_FL_HAS_EVENTS;
> @@ -200,6 +212,9 @@ static int __maybe_unused
> dw9714_vcm_suspend(struct device *dev)
> struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> int ret, val;
>
> + if (pm_runtime_suspended(&client->dev))
> + return 0;
> +
> for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS -
> 1);
> val >= 0; val -= DW9714_CTRL_STEPS) {
> ret = dw9714_i2c_write(client,
> @@ -208,7 +223,12 @@ static int __maybe_unused
> dw9714_vcm_suspend(struct device *dev)
> dev_err_once(dev, "%s I2C failure: %d",
> __func__, ret);
> usleep_range(DW9714_CTRL_DELAY_US,
> DW9714_CTRL_DELAY_US + 10);
> }
> - return 0;
> +
> + ret = regulator_disable(dw9714_dev->vcc);
> + if (ret)
> + dev_err(dev, "Failed to disable vcc: %d\n", ret);
> +
> + return ret;
> }
>
> /*
> @@ -224,6 +244,16 @@ static int __maybe_unused
> dw9714_vcm_resume(struct device *dev)
> struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> int ret, val;
>
> + if (pm_runtime_suspended(&client->dev))
> + return 0;
> +
> + ret = regulator_enable(dw9714_dev->vcc);
> + if (ret) {
> + dev_err(dev, "Failed to enable vcc: %d\n", ret);
> + return ret;
> + }
> + usleep_range(1000, 2000);
> +
> for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
> val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
> val += DW9714_CTRL_STEPS) {
hi Sakari and all interested,
any objection to this addition? I run it for a long time now.
thank you,
martin
Am Dienstag, dem 21.12.2021 um 18:33 +0100 schrieb Martin Kepplinger:
> Am Montag, dem 29.11.2021 um 13:07 +0100 schrieb Martin Kepplinger:
> > From: Angus Ainslie <[email protected]>
> >
> > Allow the dw9714 to control a regulator and adjust suspend() and
> > resume()
> > to support both runtime and system pm.
> >
> > Signed-off-by: Angus Ainslie <[email protected]>
> > Signed-off-by: Martin Kepplinger <[email protected]>
> > ---
> >
> >
> > revision history
> > ----------------
> > v3: (thank you Mark and Sakari)
> > * use regulator_get() instead of regulator_get_optional()
> >
> > v2: (thank you Mark)
> > * simplify the regulator_get_optional() error path
> > * fix regulator usage during probe()
> > https://lore.kernel.org/linux-media/[email protected]/
> >
> > v1:
> > https://lore.kernel.org/linux-media/[email protected]/
> >
> >
> >
> > drivers/media/i2c/dw9714.c | 32 +++++++++++++++++++++++++++++++-
> > 1 file changed, 31 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/media/i2c/dw9714.c
> > b/drivers/media/i2c/dw9714.c
> > index 3863dfeb8293..81170bbe0e55 100644
> > --- a/drivers/media/i2c/dw9714.c
> > +++ b/drivers/media/i2c/dw9714.c
> > @@ -5,6 +5,7 @@
> > #include <linux/i2c.h>
> > #include <linux/module.h>
> > #include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> > #include <media/v4l2-ctrls.h>
> > #include <media/v4l2-device.h>
> > #include <media/v4l2-event.h>
> > @@ -36,6 +37,7 @@ struct dw9714_device {
> > struct v4l2_ctrl_handler ctrls_vcm;
> > struct v4l2_subdev sd;
> > u16 current_val;
> > + struct regulator *vcc;
> > };
> >
> > static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl
> > *ctrl)
> > @@ -145,6 +147,16 @@ static int dw9714_probe(struct i2c_client
> > *client)
> > if (dw9714_dev == NULL)
> > return -ENOMEM;
> >
> > + dw9714_dev->vcc = devm_regulator_get(&client->dev, "vcc");
> > + if (IS_ERR(dw9714_dev->vcc))
> > + return PTR_ERR(dw9714_dev->vcc);
> > +
> > + rval = regulator_enable(dw9714_dev->vcc);
> > + if (rval < 0) {
> > + dev_err(&client->dev, "failed to enable vcc: %d\n",
> > rval);
> > + return rval;
> > + }
> > +
> > v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
> > dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> > V4L2_SUBDEV_FL_HAS_EVENTS;
> > @@ -200,6 +212,9 @@ static int __maybe_unused
> > dw9714_vcm_suspend(struct device *dev)
> > struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> > int ret, val;
> >
> > + if (pm_runtime_suspended(&client->dev))
> > + return 0;
> > +
> > for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS -
> > 1);
> > val >= 0; val -= DW9714_CTRL_STEPS) {
> > ret = dw9714_i2c_write(client,
> > @@ -208,7 +223,12 @@ static int __maybe_unused
> > dw9714_vcm_suspend(struct device *dev)
> > dev_err_once(dev, "%s I2C failure: %d",
> > __func__, ret);
> > usleep_range(DW9714_CTRL_DELAY_US,
> > DW9714_CTRL_DELAY_US + 10);
> > }
> > - return 0;
> > +
> > + ret = regulator_disable(dw9714_dev->vcc);
> > + if (ret)
> > + dev_err(dev, "Failed to disable vcc: %d\n", ret);
> > +
> > + return ret;
> > }
> >
> > /*
> > @@ -224,6 +244,16 @@ static int __maybe_unused
> > dw9714_vcm_resume(struct device *dev)
> > struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> > int ret, val;
> >
> > + if (pm_runtime_suspended(&client->dev))
> > + return 0;
> > +
> > + ret = regulator_enable(dw9714_dev->vcc);
> > + if (ret) {
> > + dev_err(dev, "Failed to enable vcc: %d\n", ret);
> > + return ret;
> > + }
> > + usleep_range(1000, 2000);
> > +
> > for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
> > val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
> > val += DW9714_CTRL_STEPS) {
>
> hi Sakari and all interested,
>
> any objection to this addition? I run it for a long time now.
>
> thank you,
>
> martin
>
>
hi all, patchwork marked this as "changes requested":
https://patchwork.linuxtv.org/project/linux-media/patch/[email protected]/
I'm not aware of changes you wish to this. What do you think?
thank you,
martin
On Thu, Jan 20, 2022 at 09:04:17AM +0100, Martin Kepplinger wrote:
> Am Dienstag, dem 21.12.2021 um 18:33 +0100 schrieb Martin Kepplinger:
> > Am Montag, dem 29.11.2021 um 13:07 +0100 schrieb Martin Kepplinger:
> > > From: Angus Ainslie <[email protected]>
> > >
> > > Allow the dw9714 to control a regulator and adjust suspend() and
> > > resume()
> > > to support both runtime and system pm.
> > >
> > > Signed-off-by: Angus Ainslie <[email protected]>
> > > Signed-off-by: Martin Kepplinger <[email protected]>
> > > ---
> > >
> > >
> > > revision history
> > > ----------------
> > > v3: (thank you Mark and Sakari)
> > > ?* use regulator_get() instead of regulator_get_optional()
> > >
> > > v2: (thank you Mark)
> > > ?* simplify the regulator_get_optional() error path
> > > ?* fix regulator usage during probe()
> > > https://lore.kernel.org/linux-media/[email protected]/
> > >
> > > v1:
> > > https://lore.kernel.org/linux-media/[email protected]/
> > >
> > >
> > >
> > > ?drivers/media/i2c/dw9714.c | 32 +++++++++++++++++++++++++++++++-
> > > ?1 file changed, 31 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/media/i2c/dw9714.c
> > > b/drivers/media/i2c/dw9714.c
> > > index 3863dfeb8293..81170bbe0e55 100644
> > > --- a/drivers/media/i2c/dw9714.c
> > > +++ b/drivers/media/i2c/dw9714.c
> > > @@ -5,6 +5,7 @@
> > > ?#include <linux/i2c.h>
> > > ?#include <linux/module.h>
> > > ?#include <linux/pm_runtime.h>
> > > +#include <linux/regulator/consumer.h>
> > > ?#include <media/v4l2-ctrls.h>
> > > ?#include <media/v4l2-device.h>
> > > ?#include <media/v4l2-event.h>
> > > @@ -36,6 +37,7 @@ struct dw9714_device {
> > > ????????struct v4l2_ctrl_handler ctrls_vcm;
> > > ????????struct v4l2_subdev sd;
> > > ????????u16 current_val;
> > > +???????struct regulator *vcc;
> > > ?};
> > > ?
> > > ?static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl
> > > *ctrl)
> > > @@ -145,6 +147,16 @@ static int dw9714_probe(struct i2c_client
> > > *client)
> > > ????????if (dw9714_dev == NULL)
> > > ????????????????return -ENOMEM;
> > > ?
> > > +???????dw9714_dev->vcc = devm_regulator_get(&client->dev, "vcc");
> > > +???????if (IS_ERR(dw9714_dev->vcc))
> > > +???????????????return PTR_ERR(dw9714_dev->vcc);
> > > +
> > > +???????rval = regulator_enable(dw9714_dev->vcc);
> > > +???????if (rval < 0) {
> > > +???????????????dev_err(&client->dev, "failed to enable vcc: %d\n",
> > > rval);
> > > +???????????????return rval;
> > > +???????}
> > > +
> > > ????????v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
> > > ????????dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> > > ????????????????????????????????V4L2_SUBDEV_FL_HAS_EVENTS;
> > > @@ -200,6 +212,9 @@ static int __maybe_unused
> > > dw9714_vcm_suspend(struct device *dev)
> > > ????????struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> > > ????????int ret, val;
> > > ?
> > > +???????if (pm_runtime_suspended(&client->dev))
> > > +???????????????return 0;
> > > +
> > > ????????for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS -
> > > 1);
> > > ???????????? val >= 0; val -= DW9714_CTRL_STEPS) {
> > > ????????????????ret = dw9714_i2c_write(client,
> > > @@ -208,7 +223,12 @@ static int __maybe_unused
> > > dw9714_vcm_suspend(struct device *dev)
> > > ????????????????????????dev_err_once(dev, "%s I2C failure: %d",
> > > __func__, ret);
> > > ????????????????usleep_range(DW9714_CTRL_DELAY_US,
> > > DW9714_CTRL_DELAY_US + 10);
> > > ????????}
> > > -???????return 0;
> > > +
> > > +???????ret = regulator_disable(dw9714_dev->vcc);
> > > +???????if (ret)
> > > +???????????????dev_err(dev, "Failed to disable vcc: %d\n", ret);
> > > +
> > > +???????return ret;
> > > ?}
> > > ?
> > > ?/*
> > > @@ -224,6 +244,16 @@ static int? __maybe_unused
> > > dw9714_vcm_resume(struct device *dev)
> > > ????????struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> > > ????????int ret, val;
> > > ?
> > > +???????if (pm_runtime_suspended(&client->dev))
> > > +???????????????return 0;
> > > +
> > > +???????ret = regulator_enable(dw9714_dev->vcc);
> > > +???????if (ret) {
> > > +???????????????dev_err(dev, "Failed to enable vcc: %d\n", ret);
> > > +???????????????return ret;
> > > +???????}
> > > +???????usleep_range(1000, 2000);
> > > +
> > > ????????for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
> > > ???????????? val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
> > > ???????????? val += DW9714_CTRL_STEPS) {
> >
> > hi Sakari and all interested,
> >
> > any objection to this addition? I run it for a long time now.
> >
> > thank you,
> >
> > ????????????????????????????? martin
> >
> >
>
> hi all, patchwork marked this as "changes requested":
> https://patchwork.linuxtv.org/project/linux-media/patch/[email protected]/
>
> I'm not aware of changes you wish to this. What do you think?
Oops! I wrote a reply but forgot to send it. I've just sent that.
--
Sakari Ailus
Hi Martin,
Apologies for the delay.
On Mon, Nov 29, 2021 at 01:07:54PM +0100, Martin Kepplinger wrote:
> From: Angus Ainslie <[email protected]>
>
> Allow the dw9714 to control a regulator and adjust suspend() and resume()
> to support both runtime and system pm.
>
> Signed-off-by: Angus Ainslie <[email protected]>
> Signed-off-by: Martin Kepplinger <[email protected]>
> ---
>
>
> revision history
> ----------------
> v3: (thank you Mark and Sakari)
> * use regulator_get() instead of regulator_get_optional()
>
> v2: (thank you Mark)
> * simplify the regulator_get_optional() error path
> * fix regulator usage during probe()
> https://lore.kernel.org/linux-media/[email protected]/
>
> v1:
> https://lore.kernel.org/linux-media/[email protected]/
>
>
>
> drivers/media/i2c/dw9714.c | 32 +++++++++++++++++++++++++++++++-
> 1 file changed, 31 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c
> index 3863dfeb8293..81170bbe0e55 100644
> --- a/drivers/media/i2c/dw9714.c
> +++ b/drivers/media/i2c/dw9714.c
> @@ -5,6 +5,7 @@
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-device.h>
> #include <media/v4l2-event.h>
> @@ -36,6 +37,7 @@ struct dw9714_device {
> struct v4l2_ctrl_handler ctrls_vcm;
> struct v4l2_subdev sd;
> u16 current_val;
> + struct regulator *vcc;
> };
>
> static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl *ctrl)
> @@ -145,6 +147,16 @@ static int dw9714_probe(struct i2c_client *client)
> if (dw9714_dev == NULL)
> return -ENOMEM;
>
> + dw9714_dev->vcc = devm_regulator_get(&client->dev, "vcc");
> + if (IS_ERR(dw9714_dev->vcc))
> + return PTR_ERR(dw9714_dev->vcc);
> +
> + rval = regulator_enable(dw9714_dev->vcc);
You'll need to disable the regulator in driver's remove callback. That also
depends on runtime PM.
See e.g. ccs_remove() in drivers/media/i2c/ccs/ccs-core.c .
> + if (rval < 0) {
> + dev_err(&client->dev, "failed to enable vcc: %d\n", rval);
> + return rval;
> + }
> +
> v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops);
> dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> V4L2_SUBDEV_FL_HAS_EVENTS;
> @@ -200,6 +212,9 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
> struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> int ret, val;
>
> + if (pm_runtime_suspended(&client->dev))
> + return 0;
> +
> for (val = dw9714_dev->current_val & ~(DW9714_CTRL_STEPS - 1);
> val >= 0; val -= DW9714_CTRL_STEPS) {
> ret = dw9714_i2c_write(client,
> @@ -208,7 +223,12 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev)
> dev_err_once(dev, "%s I2C failure: %d", __func__, ret);
> usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10);
> }
> - return 0;
> +
> + ret = regulator_disable(dw9714_dev->vcc);
> + if (ret)
> + dev_err(dev, "Failed to disable vcc: %d\n", ret);
> +
> + return ret;
> }
>
> /*
> @@ -224,6 +244,16 @@ static int __maybe_unused dw9714_vcm_resume(struct device *dev)
> struct dw9714_device *dw9714_dev = sd_to_dw9714_vcm(sd);
> int ret, val;
>
> + if (pm_runtime_suspended(&client->dev))
> + return 0;
> +
> + ret = regulator_enable(dw9714_dev->vcc);
> + if (ret) {
> + dev_err(dev, "Failed to enable vcc: %d\n", ret);
> + return ret;
> + }
> + usleep_range(1000, 2000);
> +
> for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS;
> val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1;
> val += DW9714_CTRL_STEPS) {
--
Sakari Ailus