From: Igor Vavro <[email protected]>
Add the tsin pinctrl definitions needed for integrated DVB hardware
support on Meson GXBB/GXL/GXM boards.
Signed-off-by: Igor Vavro <[email protected]>
[updated commit message]
Signed-off-by: Christian Hewitt <[email protected]>
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 43 +++++++++++++++++++++++++++---
drivers/pinctrl/meson/pinctrl-meson-gxl.c | 27 +++++++++++++++++++
2 files changed, 66 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 926b999..25325235 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -231,10 +231,24 @@ static const unsigned int hdmi_hpd_pins[] = { GPIOH_0 };
static const unsigned int hdmi_sda_pins[] = { GPIOH_1 };
static const unsigned int hdmi_scl_pins[] = { GPIOH_2 };
+static const unsigned int tsin_a_d_valid_pins[] = { GPIOY_0 };
+static const unsigned int tsin_a_sop_pins[] = { GPIOY_1 };
+static const unsigned int tsin_a_clk_pins[] = { GPIOY_2 };
+static const unsigned int tsin_a_d0_pins[] = { GPIOY_3 };
+static const unsigned int tsin_a_dp_pins[] = {
+ GPIOY_4, GPIOY_5, GPIOY_6, GPIOY_7, GPIOY_8, GPIOY_9, GPIOY_10
+};
+
+static const unsigned int tsin_a_fail_pins[] = { GPIOY_11 };
static const unsigned int i2s_out_ch23_y_pins[] = { GPIOY_8 };
static const unsigned int i2s_out_ch45_y_pins[] = { GPIOY_9 };
static const unsigned int i2s_out_ch67_y_pins[] = { GPIOY_10 };
+static const unsigned int tsin_b_d_valid_pins[] = { GPIOX_6 };
+static const unsigned int tsin_b_sop_pins[] = { GPIOX_7 };
+static const unsigned int tsin_b_clk_pins[] = { GPIOX_8 };
+static const unsigned int tsin_b_d0_pins[] = { GPIOX_9 };
+
static const unsigned int spdif_out_y_pins[] = { GPIOY_12 };
static const unsigned int gen_clk_out_pins[] = { GPIOY_15 };
@@ -437,12 +451,22 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
GROUP(pwm_a_x, 3, 17),
GROUP(pwm_e, 2, 30),
GROUP(pwm_f_x, 3, 18),
+ GROUP(tsin_b_d_valid, 3, 9),
+ GROUP(tsin_b_sop, 3, 8),
+ GROUP(tsin_b_clk, 3, 10),
+ GROUP(tsin_b_d0, 3, 7),
/* Bank Y */
- GROUP(uart_cts_c, 1, 17),
- GROUP(uart_rts_c, 1, 16),
- GROUP(uart_tx_c, 1, 19),
- GROUP(uart_rx_c, 1, 18),
+ GROUP(tsin_a_fail, 3, 3),
+ GROUP(tsin_a_d_valid, 3, 2),
+ GROUP(tsin_a_sop, 3, 1),
+ GROUP(tsin_a_clk, 3, 0),
+ GROUP(tsin_a_d0, 3, 4),
+ GROUP(tsin_a_dp, 3, 5),
+ GROUP(uart_cts_c, 1, 19),
+ GROUP(uart_rts_c, 1, 18),
+ GROUP(uart_tx_c, 1, 17),
+ GROUP(uart_rx_c, 1, 16),
GROUP(pwm_a_y, 1, 21),
GROUP(pwm_f_y, 1, 20),
GROUP(i2s_out_ch23_y, 1, 5),
@@ -601,6 +625,15 @@ static const char * const gpio_periphs_groups[] = {
"GPIOX_20", "GPIOX_21", "GPIOX_22",
};
+static const char * const tsin_a_groups[] = {
+ "tsin_a_clk", "tsin_a_sop", "tsin_a_d_valid", "tsin_a_d0",
+ "tsin_a_dp", "tsin_a_fail",
+};
+
+static const char * const tsin_b_groups[] = {
+ "tsin_b_clk", "tsin_b_sop", "tsin_b_d_valid", "tsin_b_d0",
+};
+
static const char * const emmc_groups[] = {
"emmc_nand_d07", "emmc_clk", "emmc_cmd", "emmc_ds",
};
@@ -792,6 +825,8 @@ static struct meson_pmx_func meson_gxbb_periphs_functions[] = {
FUNCTION(i2s_out),
FUNCTION(spdif_out),
FUNCTION(gen_clk_out),
+ FUNCTION(tsin_a),
+ FUNCTION(tsin_b),
};
static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 1b6e864..45d5831 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -241,6 +241,17 @@ static const unsigned int tsin_a_dp_pins[] = {
GPIODV_1, GPIODV_2, GPIODV_3, GPIODV_4, GPIODV_5, GPIODV_6, GPIODV_7,
};
+static const unsigned int tsin_b_clk_pins[] = { GPIOH_6 };
+static const unsigned int tsin_b_d0_pins[] = { GPIOH_7 };
+static const unsigned int tsin_b_sop_pins[] = { GPIOH_8 };
+static const unsigned int tsin_b_d_valid_pins[] = { GPIOH_9 };
+
+static const unsigned int tsin_b_fail_z4_pins[] = { GPIOZ_4 };
+static const unsigned int tsin_b_clk_z3_pins[] = { GPIOZ_3 };
+static const unsigned int tsin_b_d0_z2_pins[] = { GPIOZ_2 };
+static const unsigned int tsin_b_sop_z1_pins[] = { GPIOZ_1 };
+static const unsigned int tsin_b_d_valid_z0_pins[] = { GPIOZ_0 };
+
static const struct pinctrl_pin_desc meson_gxl_aobus_pins[] = {
MESON_PIN(GPIOAO_0),
MESON_PIN(GPIOAO_1),
@@ -438,6 +449,11 @@ static struct meson_pmx_group meson_gxl_periphs_groups[] = {
GROUP(eth_txd1, 4, 12),
GROUP(eth_txd2, 4, 11),
GROUP(eth_txd3, 4, 10),
+ GROUP(tsin_b_fail_z4, 3, 15),
+ GROUP(tsin_b_clk_z3, 3, 16),
+ GROUP(tsin_b_d0_z2, 3, 17),
+ GROUP(tsin_b_sop_z1, 3, 18),
+ GROUP(tsin_b_d_valid_z0, 3, 19),
GROUP(pwm_c, 3, 20),
GROUP(i2s_out_ch23_z, 3, 26),
GROUP(i2s_out_ch45_z, 3, 25),
@@ -454,6 +470,10 @@ static struct meson_pmx_group meson_gxl_periphs_groups[] = {
GROUP(i2s_out_lr_clk, 6, 24),
GROUP(i2s_out_ch01, 6, 23),
GROUP(spdif_out_h, 6, 28),
+ GROUP(tsin_b_d0, 6, 17),
+ GROUP(tsin_b_sop, 6, 18),
+ GROUP(tsin_b_d_valid, 6, 19),
+ GROUP(tsin_b_clk, 6, 20),
/* Bank DV */
GROUP(uart_tx_b, 2, 16),
@@ -689,6 +709,12 @@ static const char * const tsin_a_groups[] = {
"tsin_a_dp", "tsin_a_fail",
};
+static const char * const tsin_b_groups[] = {
+ "tsin_b_clk", "tsin_b_sop", "tsin_b_d_valid", "tsin_b_d0",
+ "tsin_b_clk_z3", "tsin_b_sop_z1", "tsin_b_d_valid_z0", "tsin_b_d0_z2",
+ "tsin_b_fail_z4",
+};
+
static const char * const gpio_aobus_groups[] = {
"GPIOAO_0", "GPIOAO_1", "GPIOAO_2", "GPIOAO_3", "GPIOAO_4",
"GPIOAO_5", "GPIOAO_6", "GPIOAO_7", "GPIOAO_8", "GPIOAO_9",
@@ -764,6 +790,7 @@ static struct meson_pmx_func meson_gxl_periphs_functions[] = {
FUNCTION(spdif_out),
FUNCTION(eth_led),
FUNCTION(tsin_a),
+ FUNCTION(tsin_b),
};
static struct meson_pmx_func meson_gxl_aobus_functions[] = {
--
2.7.4
On Mon, Mar 2, 2020 at 5:41 AM Christian Hewitt
<[email protected]> wrote:
> From: Igor Vavro <[email protected]>
>
> Add the tsin pinctrl definitions needed for integrated DVB hardware
> support on Meson GXBB/GXL/GXM boards.
>
> Signed-off-by: Igor Vavro <[email protected]>
> [updated commit message]
> Signed-off-by: Christian Hewitt <[email protected]>
Can I get Martin and/or Neil to review this?
Yours,
Linus Walleij
Hi,
On 03/03/2020 13:40, Linus Walleij wrote:
> On Mon, Mar 2, 2020 at 5:41 AM Christian Hewitt
> <[email protected]> wrote:
>
>> From: Igor Vavro <[email protected]>
>>
>> Add the tsin pinctrl definitions needed for integrated DVB hardware
>> support on Meson GXBB/GXL/GXM boards.
>>
>> Signed-off-by: Igor Vavro <[email protected]>
>> [updated commit message]
>> Signed-off-by: Christian Hewitt <[email protected]>
>
> Can I get Martin and/or Neil to review this?
Otto replied on linux-amlogic only, reporting an issue with the path, also
modifying the uart_c pin registers bits.
So it needs a resend.
Neil
>
> Yours,
> Linus Walleij
>