This series converts all the CoreSight debug bindings to DT schema
format. These bindings are at the top of the list of occurrences of
bindings without a schema. For arm64 dts files:
702 ['arm,coresight-etm4x', 'arm,primecell']
536 ['arm,coresight-cpu-debug', 'arm,primecell']
509 ['arm,coresight-dynamic-funnel', 'arm,primecell']
213 ['arm,coresight-tmc', 'arm,primecell']
143 ['arm,coresight-dynamic-replicator', 'arm,primecell']
97 ['arm,coresight-stm', 'arm,primecell']
I'll send a reply to these with the errors in dts files that this
causes. I've reviewed them and they all look legit. Xilinx Zynq though
has 3 clocks instead of 2.
Rob
Rob Herring (2):
dt-bindings: arm: Convert CoreSight bindings to DT schema
dt-bindings: arm: Convert CoreSight CPU debug to DT schema
.../bindings/arm/arm,coresight-catu.yaml | 101 +++++
.../bindings/arm/arm,coresight-cpu-debug.yaml | 81 ++++
.../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++
.../bindings/arm/arm,coresight-etb10.yaml | 92 ++++
.../bindings/arm/arm,coresight-etm.yaml | 156 +++++++
.../arm/arm,coresight-static-replicator.yaml | 90 ++++
.../bindings/arm/arm,coresight-stm.yaml | 101 +++++
.../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++
.../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++
.../bindings/arm/coresight-cpu-debug.txt | 49 ---
.../devicetree/bindings/arm/coresight.txt | 402 ------------------
11 files changed, 970 insertions(+), 451 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
delete mode 100644 Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt
--
2.34.1
Each CoreSight component has slightly different requirements and
nothing applies to every component, so each CoreSight component has its
own schema document.
Signed-off-by: Rob Herring <[email protected]>
---
.../bindings/arm/arm,coresight-catu.yaml | 101 +++++
.../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++
.../bindings/arm/arm,coresight-etb10.yaml | 92 ++++
.../bindings/arm/arm,coresight-etm.yaml | 156 +++++++
.../arm/arm,coresight-static-replicator.yaml | 90 ++++
.../bindings/arm/arm,coresight-stm.yaml | 101 +++++
.../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++
.../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++
.../devicetree/bindings/arm/coresight.txt | 402 ------------------
9 files changed, 889 insertions(+), 402 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
new file mode 100644
index 000000000000..d783d9276124
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-catu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Address Translation Unit (CATU)
+
+maintainers:
+ - Mathieu Poirier <[email protected]>
+ - Mike Leach <[email protected]>
+ - Leo Yan <[email protected]>
+ - Suzuki K Poulose <[email protected]>
+
+description: |
+ CoreSight components are compliant with the ARM CoreSight architecture
+ specification and can be connected in various topologies to suit a particular
+ SoCs tracing needs. These trace components can generally be classified as
+ sinks, links and sources. Trace data produced by one or more sources flows
+ through the intermediate links connecting the source to the currently selected
+ sink.
+
+ The CoreSight Address Translation Unit (CATU) translates addresses between an
+ AXI master and system memory. The CATU is normally used along with the TMC to
+ implement scattering of virtual trace buffers in physical memory. The CATU
+ translates contiguous Virtual Addresses (VAs) from an AXI master into
+ non-contiguous Physical Addresses (PAs) that are intended for system memory.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,coresight-catu
+ required:
+ - compatible
+
+allOf:
+ - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: arm,coresight-catu
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: apb_pclk
+ - const: atclk
+
+ interrupts:
+ maxItems: 1
+ description: Address translation error interrupt
+
+ in-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port:
+ description: AXI Slave connected to another Coresight component
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - in-ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ catu@207e0000 {
+ compatible = "arm,coresight-catu", "arm,primecell";
+ reg = <0x207e0000 0x1000>;
+
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ in-ports {
+ port {
+ catu_in_port: endpoint {
+ remote-endpoint = <&etr_out_port>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
new file mode 100644
index 000000000000..1eeedc22857c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-funnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Programmable Trace Bus Funnel
+
+maintainers:
+ - Mathieu Poirier <[email protected]>
+ - Mike Leach <[email protected]>
+ - Leo Yan <[email protected]>
+ - Suzuki K Poulose <[email protected]>
+
+description: |
+ CoreSight components are compliant with the ARM CoreSight architecture
+ specification and can be connected in various topologies to suit a particular
+ SoCs tracing needs. These trace components can generally be classified as
+ sinks, links and sources. Trace data produced by one or more sources flows
+ through the intermediate links connecting the source to the currently selected
+ sink.
+
+ The Coresight funnel merges 2-8 trace sources into a single trace
+ stream with programmable enable and priority of input ports.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,coresight-dynamic-funnel
+ required:
+ - compatible
+
+allOf:
+ - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: arm,coresight-dynamic-funnel
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: apb_pclk
+ - const: atclk
+
+ in-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ patternProperties:
+ '^port(@[0-7])?$':
+ description: Input connections from CoreSight Trace bus
+ $ref: /schemas/graph.yaml#/properties/port
+
+ out-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port:
+ description: Output connection to CoreSight Trace bus
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - in-ports
+ - out-ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ funnel@20040000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x20040000 0x1000>;
+
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ out-ports {
+ port {
+ funnel_out_port0: endpoint {
+ remote-endpoint = <&replicator_in_port0>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ funnel_in_port0: endpoint {
+ remote-endpoint = <&ptm0_out_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ funnel_in_port1: endpoint {
+ remote-endpoint = <&ptm1_out_port>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ funnel_in_port2: endpoint {
+ remote-endpoint = <&etm0_out_port>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
new file mode 100644
index 000000000000..fd06ede26ceb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etb10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace Buffer
+
+maintainers:
+ - Mathieu Poirier <[email protected]>
+ - Mike Leach <[email protected]>
+ - Leo Yan <[email protected]>
+ - Suzuki K Poulose <[email protected]>
+
+description: |
+ CoreSight components are compliant with the ARM CoreSight architecture
+ specification and can be connected in various topologies to suit a particular
+ SoCs tracing needs. These trace components can generally be classified as
+ sinks, links and sources. Trace data produced by one or more sources flows
+ through the intermediate links connecting the source to the currently selected
+ sink.
+
+ The CoreSight Embedded Trace Buffer stores traces in a dedicated SRAM that is
+ used as a circular buffer.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,coresight-etb10
+ required:
+ - compatible
+
+allOf:
+ - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: arm,coresight-etb10
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: apb_pclk
+ - const: atclk
+
+ in-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port:
+ description: Input connection from CoreSight Trace bus.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - in-ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ etb@20010000 {
+ compatible = "arm,coresight-etb10", "arm,primecell";
+ reg = <0x20010000 0x1000>;
+
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
new file mode 100644
index 000000000000..e0377ce48537
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace MacroCell
+
+maintainers:
+ - Mathieu Poirier <[email protected]>
+ - Mike Leach <[email protected]>
+ - Leo Yan <[email protected]>
+ - Suzuki K Poulose <[email protected]>
+
+description: |
+ CoreSight components are compliant with the ARM CoreSight architecture
+ specification and can be connected in various topologies to suit a particular
+ SoCs tracing needs. These trace components can generally be classified as
+ sinks, links and sources. Trace data produced by one or more sources flows
+ through the intermediate links connecting the source to the currently selected
+ sink.
+
+ The Embedded Trace Macrocell (ETM) is a real-time trace module providing
+ instruction and data tracing of a processor.
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - arm,coresight-etm3x
+ - arm,coresight-etm4x
+ - arm,coresight-etm4x-sysreg
+ required:
+ - compatible
+
+allOf:
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: arm,coresight-etm4x-sysreg
+ then:
+ $ref: /schemas/arm/primecell.yaml#
+ required:
+ - reg
+
+properties:
+ compatible:
+ oneOf:
+ - description:
+ Embedded Trace Macrocell with memory mapped access.
+ items:
+ - enum:
+ - arm,coresight-etm3x
+ - arm,coresight-etm4x
+ - const: arm,primecell
+ - description:
+ Embedded Trace Macrocell (version 4.x), with system register access only
+ const: arm,coresight-etm4x-sysreg
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: apb_pclk
+ - const: atclk
+
+ arm,coresight-loses-context-with-cpu:
+ type: boolean
+ description:
+ Indicates that the hardware will lose register context on CPU power down
+ (e.g. CPUIdle). An example of where this may be needed are systems which
+ contain a coresight component and CPU in the same power domain. When the
+ CPU powers down the coresight component also powers down and loses its
+ context.
+
+ arm,cp14:
+ type: boolean
+ description:
+ Must be present if the system accesses ETM/PTM management registers via
+ co-processor 14.
+
+ qcom,skip-power-up:
+ type: boolean
+ description:
+ Indicates that an implementation can skip powering up the trace unit.
+ TRCPDCR.PU does not have to be set on Qualcomm Technologies Inc. systems
+ since ETMs are in the same power domain as their CPU cores. This property
+ is required to identify such systems with hardware errata where the CPU
+ watchdog counter is stopped when TRCPDCR.PU is set.
+
+ cpu:
+ description:
+ phandle to the cpu this ETM is bound to.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ out-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port:
+ description: Output connection from the ETM to CoreSight Trace bus.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - cpu
+ - out-ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ptm@2201c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x2201c000 0x1000>;
+
+ cpu = <&cpu0>;
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
+ };
+ };
+ };
+
+ ptm@2201d000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x2201d000 0x1000>;
+
+ cpu = <&cpu1>;
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
new file mode 100644
index 000000000000..66ee97370fb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-static-replicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Static Trace Bus Replicator
+
+maintainers:
+ - Mathieu Poirier <[email protected]>
+ - Mike Leach <[email protected]>
+ - Leo Yan <[email protected]>
+ - Suzuki K Poulose <[email protected]>
+
+description: |
+ CoreSight components are compliant with the ARM CoreSight architecture
+ specification and can be connected in various topologies to suit a particular
+ SoCs tracing needs. These trace components can generally be classified as
+ sinks, links and sources. Trace data produced by one or more sources flows
+ through the intermediate links connecting the source to the currently selected
+ sink.
+
+ The Coresight replicator splits a single trace stream into two trace streams
+ for systems that have more than one trace sink component.
+
+properties:
+ compatible:
+ const: arm,coresight-static-replicator
+
+ in-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port:
+ description: Input connection from CoreSight Trace bus
+ $ref: /schemas/graph.yaml#/properties/port
+
+ out-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ patternProperties:
+ '^port@[01]$':
+ description: Output connections to CoreSight Trace bus
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - in-ports
+ - out-ports
+
+additionalProperties: false
+
+examples:
+ - |
+ replicator {
+ /* non-configurable replicators don't show up on the
+ * AMBA bus. As such no need to add "arm,primecell".
+ */
+ compatible = "arm,coresight-static-replicator";
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&etb_in_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+ };
+
+ in-ports {
+ port {
+ replicator_in_port0: endpoint {
+ remote-endpoint = <&funnel_out_port0>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
new file mode 100644
index 000000000000..905008faa012
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-stm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight System Trace MacroCell
+
+maintainers:
+ - Mathieu Poirier <[email protected]>
+ - Mike Leach <[email protected]>
+ - Leo Yan <[email protected]>
+ - Suzuki K Poulose <[email protected]>
+
+description: |
+ CoreSight components are compliant with the ARM CoreSight architecture
+ specification and can be connected in various topologies to suit a particular
+ SoCs tracing needs. These trace components can generally be classified as
+ sinks, links and sources. Trace data produced by one or more sources flows
+ through the intermediate links connecting the source to the currently selected
+ sink.
+
+ The STM is a trace source that is integrated into a CoreSight system, designed
+ primarily for high-bandwidth trace of instrumentation embedded into software.
+ This instrumentation is made up of memory-mapped writes to the STM Advanced
+ eXtensible Interface (AXI) slave, which carry information about the behavior
+ of the software.
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,coresight-stm
+ required:
+ - compatible
+
+allOf:
+ - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: arm,coresight-stm
+ - const: arm,primecell
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: stm-base
+ - const: stm-stimulus-base
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: apb_pclk
+ - const: atclk
+
+ out-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port:
+ description: Output connection to the CoreSight Trace bus.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - out-ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ stm@20100000 {
+ compatible = "arm,coresight-stm", "arm,primecell";
+ reg = <0x20100000 0x1000>,
+ <0x28000000 0x180000>;
+ reg-names = "stm-base", "stm-stimulus-base";
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ out-ports {
+ port {
+ stm_out_port: endpoint {
+ remote-endpoint = <&main_funnel_in_port2>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
new file mode 100644
index 000000000000..ee1ce47225be
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Memory Controller
+
+maintainers:
+ - Mathieu Poirier <[email protected]>
+ - Mike Leach <[email protected]>
+ - Leo Yan <[email protected]>
+ - Suzuki K Poulose <[email protected]>
+
+description: |
+ CoreSight components are compliant with the ARM CoreSight architecture
+ specification and can be connected in various topologies to suit a particular
+ SoCs tracing needs. These trace components can generally be classified as
+ sinks, links and sources. Trace data produced by one or more sources flows
+ through the intermediate links connecting the source to the currently selected
+ sink.
+
+ Trace Memory Controller is used for Embedded Trace Buffer(ETB), Embedded Trace
+ FIFO(ETF) and Embedded Trace Router(ETR) configurations. The configuration
+ mode (ETB, ETF, ETR) is discovered at boot time when the device is probed.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,coresight-tmc
+ required:
+ - compatible
+
+allOf:
+ - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: arm,coresight-tmc
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: apb_pclk
+ - const: atclk
+
+ arm,buffer-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Size of contiguous buffer space for TMC ETR (embedded trace router). The
+ buffer size can be configured dynamically via buffer_size property in
+ sysfs instead.
+
+ arm,scatter-gather:
+ type: boolean
+ description:
+ Indicates that the TMC-ETR can safely use the SG mode on this system.
+
+ arm,max-burst-size:
+ description:
+ The maximum burst size initiated by TMC on the AXI master interface. The
+ burst size can be in the range [0..15], the setting supports one data
+ transfer per burst up to a maximum of 16 data transfers per burst.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+
+
+ in-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port:
+ description: Input connection from the CoreSight Trace bus.
+ $ref: /schemas/graph.yaml#/properties/port
+
+ out-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port:
+ description: AXI Master output connection. Used for ETR and ETF
+ configurations.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - in-ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ etr@20070000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x20070000 0x1000>;
+
+ clocks = <&oscclk6a>;
+ clock-names = "apb_pclk";
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&replicator2_out_port0>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ etr_out_port: endpoint {
+ remote-endpoint = <&catu_in_port>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
new file mode 100644
index 000000000000..e80d48200c37
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tpiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Port Interface Unit
+
+maintainers:
+ - Mathieu Poirier <[email protected]>
+ - Mike Leach <[email protected]>
+ - Leo Yan <[email protected]>
+ - Suzuki K Poulose <[email protected]>
+
+description: |
+ CoreSight components are compliant with the ARM CoreSight architecture
+ specification and can be connected in various topologies to suit a particular
+ SoCs tracing needs. These trace components can generally be classified as
+ sinks, links and sources. Trace data produced by one or more sources flows
+ through the intermediate links connecting the source to the currently selected
+ sink.
+
+ The CoreSight Trace Port Interface Unit captures trace data from the trace bus
+ and outputs it to an external trace port.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,coresight-tpiu
+ required:
+ - compatible
+
+allOf:
+ - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: arm,coresight-tpiu
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: apb_pclk
+ - const: atclk
+
+ in-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ additionalProperties: false
+
+ properties:
+ port:
+ description: Input connection from the CoreSight Trace bus.
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - in-ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ tpiu@e3c05000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0xe3c05000 0x1000>;
+
+ clocks = <&clk_375m>;
+ clock-names = "apb_pclk";
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&funnel4_out_port0>;
+ };
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
deleted file mode 100644
index c68d93a35b6c..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ /dev/null
@@ -1,402 +0,0 @@
-* CoreSight Components:
-
-CoreSight components are compliant with the ARM CoreSight architecture
-specification and can be connected in various topologies to suit a particular
-SoCs tracing needs. These trace components can generally be classified as
-sinks, links and sources. Trace data produced by one or more sources flows
-through the intermediate links connecting the source to the currently selected
-sink. Each CoreSight component device should use these properties to describe
-its hardware characteristcs.
-
-* Required properties for all components *except* non-configurable replicators
- and non-configurable funnels:
-
- * compatible: These have to be supplemented with "arm,primecell" as
- drivers are using the AMBA bus interface. Possible values include:
- - Embedded Trace Buffer (version 1.0):
- "arm,coresight-etb10", "arm,primecell";
-
- - Trace Port Interface Unit:
- "arm,coresight-tpiu", "arm,primecell";
-
- - Trace Memory Controller, used for Embedded Trace Buffer(ETB),
- Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR)
- configuration. The configuration mode (ETB, ETF, ETR) is
- discovered at boot time when the device is probed.
- "arm,coresight-tmc", "arm,primecell";
-
- - Trace Programmable Funnel:
- "arm,coresight-dynamic-funnel", "arm,primecell";
- "arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For
- backward compatibility and will be removed)
-
- - Embedded Trace Macrocell (version 3.x) and
- Program Flow Trace Macrocell:
- "arm,coresight-etm3x", "arm,primecell";
-
- - Embedded Trace Macrocell (version 4.x), with memory mapped access.
- "arm,coresight-etm4x", "arm,primecell";
-
- - Embedded Trace Macrocell (version 4.x), with system register access only.
- "arm,coresight-etm4x-sysreg";
-
- - Coresight programmable Replicator :
- "arm,coresight-dynamic-replicator", "arm,primecell";
-
- - System Trace Macrocell:
- "arm,coresight-stm", "arm,primecell"; [1]
- - Coresight Address Translation Unit (CATU)
- "arm,coresight-catu", "arm,primecell";
-
- - Coresight Cross Trigger Interface (CTI):
- "arm,coresight-cti", "arm,primecell";
- See coresight-cti.yaml for full CTI definitions.
-
- * reg: physical base address and length of the register
- set(s) of the component.
-
- * clocks: the clocks associated to this component.
-
- * clock-names: the name of the clocks referenced by the code.
- Since we are using the AMBA framework, the name of the clock
- providing the interconnect should be "apb_pclk", and some
- coresight blocks also have an additional clock "atclk", which
- clocks the core of that coresight component. The latter clock
- is optional.
-
- * port or ports: see "Graph bindings for Coresight" below.
-
-* Additional required property for Embedded Trace Macrocell (version 3.x and
- version 4.x):
- * cpu: the cpu phandle this ETM/PTM is affined to. Do not
- assume it to default to CPU0 if omitted.
-
-* Additional required properties for System Trace Macrocells (STM):
- * reg: along with the physical base address and length of the register
- set as described above, another entry is required to describe the
- mapping of the extended stimulus port area.
-
- * reg-names: the only acceptable values are "stm-base" and
- "stm-stimulus-base", each corresponding to the areas defined in "reg".
-
-* Required properties for Coresight Cross Trigger Interface (CTI)
- See coresight-cti.yaml for full CTI definitions.
-
-* Required properties for devices that don't show up on the AMBA bus, such as
- non-configurable replicators and non-configurable funnels:
-
- * compatible: Currently supported value is (note the absence of the
- AMBA markee):
- - Coresight Non-configurable Replicator:
- "arm,coresight-static-replicator";
- "arm,coresight-replicator"; (OBSOLETE. For backward
- compatibility and will be removed)
-
- - Coresight Non-configurable Funnel:
- "arm,coresight-static-funnel";
-
- * port or ports: see "Graph bindings for Coresight" below.
-
-* Optional properties for all components:
-
- * arm,coresight-loses-context-with-cpu : boolean. Indicates that the
- hardware will lose register context on CPU power down (e.g. CPUIdle).
- An example of where this may be needed are systems which contain a
- coresight component and CPU in the same power domain. When the CPU
- powers down the coresight component also powers down and loses its
- context. This property is currently only used for the ETM 4.x driver.
-
-* Optional properties for ETM/PTMs:
-
- * arm,cp14: must be present if the system accesses ETM/PTM management
- registers via co-processor 14.
-
- * qcom,skip-power-up: boolean. Indicates that an implementation can
- skip powering up the trace unit. TRCPDCR.PU does not have to be set
- on Qualcomm Technologies Inc. systems since ETMs are in the same power
- domain as their CPU cores. This property is required to identify such
- systems with hardware errata where the CPU watchdog counter is stopped
- when TRCPDCR.PU is set.
-
-* Optional property for TMC:
-
- * arm,buffer-size: size of contiguous buffer space for TMC ETR
- (embedded trace router). This property is obsolete. The buffer size
- can be configured dynamically via buffer_size property in sysfs.
-
- * arm,scatter-gather: boolean. Indicates that the TMC-ETR can safely
- use the SG mode on this system.
-
- * arm,max-burst-size: The maximum burst size initiated by TMC on the
- AXI master interface. The burst size can be in the range [0..15],
- the setting supports one data transfer per burst up to a maximum of
- 16 data transfers per burst.
-
-* Optional property for CATU :
- * interrupts : Exactly one SPI may be listed for reporting the address
- error
-
-* Optional property for configurable replicators:
-
- * qcom,replicator-loses-context: boolean. Indicates that the replicator
- will lose register context when AMBA clock is removed which is observed
- in some replicator designs.
-
-Graph bindings for Coresight
--------------------------------
-
-Coresight components are interconnected to create a data path for the flow of
-trace data generated from the "sources" to their collection points "sink".
-Each coresight component must describe the "input" and "output" connections.
-The connections must be described via generic DT graph bindings as described
-by the "bindings/graph.txt", where each "port" along with an "endpoint"
-component represents a hardware port and the connection.
-
- * All output ports must be listed inside a child node named "out-ports"
- * All input ports must be listed inside a child node named "in-ports".
- * Port address must match the hardware port number.
-
-Example:
-
-1. Sinks
- etb@20010000 {
- compatible = "arm,coresight-etb10", "arm,primecell";
- reg = <0 0x20010000 0 0x1000>;
-
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- in-ports {
- port {
- etb_in_port: endpoint@0 {
- remote-endpoint = <&replicator_out_port0>;
- };
- };
- };
- };
-
- tpiu@20030000 {
- compatible = "arm,coresight-tpiu", "arm,primecell";
- reg = <0 0x20030000 0 0x1000>;
-
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- in-ports {
- port {
- tpiu_in_port: endpoint@0 {
- remote-endpoint = <&replicator_out_port1>;
- };
- };
- };
- };
-
- etr@20070000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0 0x20070000 0 0x1000>;
-
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- in-ports {
- port {
- etr_in_port: endpoint {
- remote-endpoint = <&replicator2_out_port0>;
- };
- };
- };
-
- out-ports {
- port {
- etr_out_port: endpoint {
- remote-endpoint = <&catu_in_port>;
- };
- };
- };
- };
-
-2. Links
- replicator {
- /* non-configurable replicators don't show up on the
- * AMBA bus. As such no need to add "arm,primecell".
- */
- compatible = "arm,coresight-static-replicator";
-
- out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* replicator output ports */
- port@0 {
- reg = <0>;
- replicator_out_port0: endpoint {
- remote-endpoint = <&etb_in_port>;
- };
- };
-
- port@1 {
- reg = <1>;
- replicator_out_port1: endpoint {
- remote-endpoint = <&tpiu_in_port>;
- };
- };
- };
-
- in-ports {
- port {
- replicator_in_port0: endpoint {
- remote-endpoint = <&funnel_out_port0>;
- };
- };
- };
- };
-
- funnel {
- /*
- * non-configurable funnel don't show up on the AMBA
- * bus. As such no need to add "arm,primecell".
- */
- compatible = "arm,coresight-static-funnel";
- clocks = <&crg_ctrl HI3660_PCLK>;
- clock-names = "apb_pclk";
-
- out-ports {
- port {
- combo_funnel_out: endpoint {
- remote-endpoint = <&top_funnel_in>;
- };
- };
- };
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- combo_funnel_in0: endpoint {
- remote-endpoint = <&cluster0_etf_out>;
- };
- };
-
- port@1 {
- reg = <1>;
- combo_funnel_in1: endpoint {
- remote-endpoint = <&cluster1_etf_out>;
- };
- };
- };
- };
-
- funnel@20040000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0 0x20040000 0 0x1000>;
-
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- out-ports {
- port {
- funnel_out_port0: endpoint {
- remote-endpoint =
- <&replicator_in_port0>;
- };
- };
- };
-
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- funnel_in_port0: endpoint {
- remote-endpoint = <&ptm0_out_port>;
- };
- };
-
- port@1 {
- reg = <1>;
- funnel_in_port1: endpoint {
- remote-endpoint = <&ptm1_out_port>;
- };
- };
-
- port@2 {
- reg = <2>;
- funnel_in_port2: endpoint {
- remote-endpoint = <&etm0_out_port>;
- };
- };
-
- };
- };
-
-3. Sources
- ptm@2201c000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0 0x2201c000 0 0x1000>;
-
- cpu = <&cpu0>;
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- out-ports {
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
- };
- };
- };
- };
-
- ptm@2201d000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0 0x2201d000 0 0x1000>;
-
- cpu = <&cpu1>;
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
- out-ports {
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
- };
- };
- };
- };
-
-4. STM
- stm@20100000 {
- compatible = "arm,coresight-stm", "arm,primecell";
- reg = <0 0x20100000 0 0x1000>,
- <0 0x28000000 0 0x180000>;
- reg-names = "stm-base", "stm-stimulus-base";
-
- clocks = <&soc_smc50mhz>;
- clock-names = "apb_pclk";
- out-ports {
- port {
- stm_out_port: endpoint {
- remote-endpoint = <&main_funnel_in_port2>;
- };
- };
- };
- };
-
-5. CATU
-
- catu@207e0000 {
- compatible = "arm,coresight-catu", "arm,primecell";
- reg = <0 0x207e0000 0 0x1000>;
-
- clocks = <&oscclk6a>;
- clock-names = "apb_pclk";
-
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- in-ports {
- port {
- catu_in_port: endpoint {
- remote-endpoint = <&etr_out_port>;
- };
- };
- };
- };
-
-[1]. There is currently two version of STM: STM32 and STM500. Both
-have the same HW interface and as such don't need an explicit binding name.
--
2.34.1
Hi Rob,
Thanks a lot for converting these to yaml. Some minor comments below.
In general, the "clocks" and "clock-names" are optional (e.g, for
etm4 with system register access).
On 20/05/2022 22:44, Rob Herring wrote:
> Each CoreSight component has slightly different requirements and
> nothing applies to every component, so each CoreSight component has its
> own schema document.
>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../bindings/arm/arm,coresight-catu.yaml | 101 +++++
> .../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++
> .../bindings/arm/arm,coresight-etb10.yaml | 92 ++++
> .../bindings/arm/arm,coresight-etm.yaml | 156 +++++++
> .../arm/arm,coresight-static-replicator.yaml | 90 ++++
> .../bindings/arm/arm,coresight-stm.yaml | 101 +++++
> .../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++
> .../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++
> .../devicetree/bindings/arm/coresight.txt | 402 ------------------
> 9 files changed, 889 insertions(+), 402 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
> create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
> create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
> create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
> create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
> create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
> create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
> create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
> delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt
...
> diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
> new file mode 100644
> index 000000000000..ee1ce47225be
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
> @@ -0,0 +1,132 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Arm CoreSight Trace Memory Controller
> +
...
> + out-ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + additionalProperties: false
> +
> + properties:
> + port:
> + description: AXI Master output connection. Used for ETR and ETF
> + configurations.
nit: This is only for ETRs. Never for ETFs.
Suzuki
On Mon, May 23, 2022 at 12:03:36PM +0100, Suzuki K Poulose wrote:
> Hi Rob,
>
> Thanks a lot for converting these to yaml. Some minor comments below.
>
> In general, the "clocks" and "clock-names" are optional (e.g, for
> etm4 with system register access).
Reality, based on running dtbs_checks, seems to be that all
instances have them, and the original doc said required.
>
> On 20/05/2022 22:44, Rob Herring wrote:
> > Each CoreSight component has slightly different requirements and
> > nothing applies to every component, so each CoreSight component has its
> > own schema document.
> >
> > Signed-off-by: Rob Herring <[email protected]>
> > ---
> > .../bindings/arm/arm,coresight-catu.yaml | 101 +++++
> > .../arm/arm,coresight-dynamic-funnel.yaml | 126 ++++++
> > .../bindings/arm/arm,coresight-etb10.yaml | 92 ++++
> > .../bindings/arm/arm,coresight-etm.yaml | 156 +++++++
> > .../arm/arm,coresight-static-replicator.yaml | 90 ++++
> > .../bindings/arm/arm,coresight-stm.yaml | 101 +++++
> > .../bindings/arm/arm,coresight-tmc.yaml | 132 ++++++
> > .../bindings/arm/arm,coresight-tpiu.yaml | 91 ++++
> > .../devicetree/bindings/arm/coresight.txt | 402 ------------------
> > 9 files changed, 889 insertions(+), 402 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
> > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
> > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
> > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
> > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
> > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
> > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
> > create mode 100644 Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
> > delete mode 100644 Documentation/devicetree/bindings/arm/coresight.txt
>
> ...
>
> > diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
> > new file mode 100644
> > index 000000000000..ee1ce47225be
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
> > @@ -0,0 +1,132 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Arm CoreSight Trace Memory Controller
> > +
>
> ...
>
> > + out-ports:
> > + $ref: /schemas/graph.yaml#/properties/ports
> > + additionalProperties: false
> > +
> > + properties:
> > + port:
> > + description: AXI Master output connection. Used for ETR and ETF
> > + configurations.
>
> nit: This is only for ETRs. Never for ETFs.
What about this example[1]? It's not AXI, but ATB actually.
Rob
[1] https://developer.arm.com/documentation/ddi0461/b/Introduction/Example-systems-with-different-configurations/ETF--ETR--and-TPIU