2019-10-07 15:18:37

by Hanna Hawa

[permalink] [raw]
Subject: [PATCH v6 0/3] Add support for Amazon's Annapurna Labs EDAC for L1/L2

This series adds L1 cache and L2 cache error detection and correction support
for Amazon's Annapurna Labs SoCs.

Alpine SoCs supports L1 and L2 single bit correction and two bits detection
capability based on ARM implementation.

The CPU cores in the SoC are the same and all of them support ECC.

Changes since v5:
-----------------
- Use top-level machine compatible to bind the EDAC device
- Remove DT bindings
- Add initcall to create platform device and register the edac driver
- follow 'next-level-cache' phandle to create CPU topology for L2 driver
- Change the driver to be tristate
- Move register read to function flow
- EXPORT_SYMBOL_GPL of_find_next_cache_node

Changes since v4:
-----------------
- Added include for cpumask.h in al_l2_edac.c
- Fix RAMID error print according to ARM TRM
- Use for_each_possible_cpu() to parse information for DT.
- Add missing of_node_put() call.

Changes since v3:
-----------------
- Added include for smp.h sysreg.h
- Use scnprintf instead of snprintf
- Move write_sysreg_s after valid check to minimize the window between
read/write.
- Use IS_ERR_OR_NULL instead of IS_ERR, because
edac_device_alloc_ctl_info may return NULL.

Changes since v2:
-----------------
- Use BIT for single bit instead of GENMASK
- Use BIT_ULL and GENMASK_ULL for 64bit vector
- Fix the mod_name/ctrl_name.

Changes since v1:
-----------------
- Split into two drivers
- Get cpu-mask according to l2-cache handler from devicetree
- Remove parameter casting
- Use GENMASK() in bit mask
- Use FIELD_GET()
- Update define description PLRU_RAM -> PF_RAM
- Use sys_reg() and read_sysreg_s()
- Remove all write/read wrappers
- Check fatal field to set if the error correctable or not
- Remove un-relevant information from error prints.
- Update smp_call_function_single() call function to wait
- remove usage of get_online_cpus/put_online_cpus
- Use on_each_cpu() and smp_call_function_any() instead of loop with for_each_cpu.
- use buffer for error prints and pass to edac API
- Remove edac_op_state set
- Add for loop to report on repeated errors of the same type
- Fix error name of the TLB to be L2_TLB as written in ARM TRM
- Minor change in Kconfig
- Minor changes in commit message

Hanna Hawa (3):
edac: Add support for Amazon's Annapurna Labs L1 EDAC
of: EXPORT_SYMBOL_GPL of_find_next_cache_node
edac: Add support for Amazon's Annapurna Labs L2 EDAC

MAINTAINERS | 10 ++
drivers/edac/Kconfig | 16 +++
drivers/edac/Makefile | 2 +
drivers/edac/al_l1_edac.c | 190 +++++++++++++++++++++++++++++
drivers/edac/al_l2_edac.c | 251 ++++++++++++++++++++++++++++++++++++++
drivers/of/base.c | 1 +
6 files changed, 470 insertions(+)
create mode 100644 drivers/edac/al_l1_edac.c
create mode 100644 drivers/edac/al_l2_edac.c

--
2.17.1


2019-10-07 15:19:09

by Hanna Hawa

[permalink] [raw]
Subject: [PATCH v6 3/3] edac: Add support for Amazon's Annapurna Labs L2 EDAC

Adds support for Amazon's Annapurna Labs L2 EDAC driver to detect and
report L2 errors.

Signed-off-by: Hanna Hawa <[email protected]>
---
MAINTAINERS | 5 +
drivers/edac/Kconfig | 8 ++
drivers/edac/Makefile | 1 +
drivers/edac/al_l2_edac.c | 251 ++++++++++++++++++++++++++++++++++++++
4 files changed, 265 insertions(+)
create mode 100644 drivers/edac/al_l2_edac.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 7887a62dc843..0eabcfcf91a9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -748,6 +748,11 @@ M: Hanna Hawa <[email protected]>
S: Maintained
F: drivers/edac/al_l1_edac.c

+AMAZON ANNAPURNA LABS L2 EDAC
+M: Hanna Hawa <[email protected]>
+S: Maintained
+F: drivers/edac/al_l2_edac.c
+
AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
M: Talel Shenhar <[email protected]>
S: Maintained
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index e8161d7c7469..cb394aff1cab 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -82,6 +82,14 @@ config EDAC_AL_L1
for Amazon's Annapurna Labs SoCs.
This driver detects errors of L1 caches.

+config EDAC_AL_L2
+ tristate "Amazon's Annapurna Labs L2 EDAC"
+ depends on ARCH_ALPINE
+ help
+ Support for L2 error detection and correction
+ for Amazon's Annapurna Labs SoCs.
+ This driver detects errors of L2 caches.
+
config EDAC_AMD64
tristate "AMD64 (Opteron, Athlon64)"
depends on AMD_NB && EDAC_DECODE_MCE
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index caa2dc91e8a0..60a6b8bbe2f8 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -23,6 +23,7 @@ edac_mce_amd-y := mce_amd.o
obj-$(CONFIG_EDAC_DECODE_MCE) += edac_mce_amd.o

obj-$(CONFIG_EDAC_AL_L1) += al_l1_edac.o
+obj-$(CONFIG_EDAC_AL_L2) += al_l2_edac.o
obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o
obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o
obj-$(CONFIG_EDAC_I5000) += i5000_edac.o
diff --git a/drivers/edac/al_l2_edac.c b/drivers/edac/al_l2_edac.c
new file mode 100644
index 000000000000..156610c85591
--- /dev/null
+++ b/drivers/edac/al_l2_edac.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+
+#include <asm/sysreg.h>
+#include <linux/bitfield.h>
+#include <linux/cpumask.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include "edac_device.h"
+#include "edac_module.h"
+
+#define DRV_NAME "al_l2_edac"
+
+/* Same bit assignments of L2MERRSR_EL1 in ARM CA57/CA72 */
+#define ARM_CA57_L2MERRSR_EL1 sys_reg(3, 1, 15, 2, 3)
+#define ARM_CA57_L2MERRSR_RAMID GENMASK(30, 24)
+#define ARM_CA57_L2_TAG_RAM 0x10
+#define ARM_CA57_L2_DATA_RAM 0x11
+#define ARM_CA57_L2_SNOOP_RAM 0x12
+#define ARM_CA57_L2_DIRTY_RAM 0x14
+#define ARM_CA57_L2_INC_PF_RAM 0x18
+#define ARM_CA57_L2MERRSR_VALID BIT(31)
+#define ARM_CA57_L2MERRSR_REPEAT GENMASK_ULL(39, 32)
+#define ARM_CA57_L2MERRSR_OTHER GENMASK_ULL(47, 40)
+#define ARM_CA57_L2MERRSR_FATAL BIT_ULL(63)
+
+#define AL_L2_EDAC_MSG_MAX 256
+
+struct al_l2_cache {
+ cpumask_t cluster_cpus;
+ struct list_head list_node;
+ struct device_node *of_node;
+};
+
+struct al_l2_edac {
+ struct list_head l2_caches;
+};
+
+static void al_l2_edac_l2merrsr_read_status(void *arg)
+{
+ struct edac_device_ctl_info *edac_dev = arg;
+ int cpu, i, space, count;
+ u32 ramid, repeat, other, fatal;
+ u64 val;
+ char msg[AL_L2_EDAC_MSG_MAX];
+ char *p;
+
+ val = read_sysreg_s(ARM_CA57_L2MERRSR_EL1);
+ if (!(FIELD_GET(ARM_CA57_L2MERRSR_VALID, val)))
+ return;
+
+ write_sysreg_s(0, ARM_CA57_L2MERRSR_EL1);
+
+ cpu = smp_processor_id();
+ ramid = FIELD_GET(ARM_CA57_L2MERRSR_RAMID, val);
+ repeat = FIELD_GET(ARM_CA57_L2MERRSR_REPEAT, val);
+ other = FIELD_GET(ARM_CA57_L2MERRSR_OTHER, val);
+ fatal = FIELD_GET(ARM_CA57_L2MERRSR_FATAL, val);
+
+ space = sizeof(msg);
+ p = msg;
+ count = scnprintf(p, space, "CPU%d L2 %serror detected", cpu,
+ (fatal) ? "Fatal " : "");
+ p += count;
+ space -= count;
+
+ switch (ramid) {
+ case ARM_CA57_L2_TAG_RAM:
+ count = scnprintf(p, space, " RAMID='L2 Tag RAM'");
+ break;
+ case ARM_CA57_L2_DATA_RAM:
+ count = scnprintf(p, space, " RAMID='L2 Data RAM'");
+ break;
+ case ARM_CA57_L2_SNOOP_RAM:
+ count = scnprintf(p, space, " RAMID='L2 Snoop Tag RAM'");
+ break;
+ case ARM_CA57_L2_DIRTY_RAM:
+ count = scnprintf(p, space, " RAMID='L2 Dirty RAM'");
+ break;
+ case ARM_CA57_L2_INC_PF_RAM:
+ count = scnprintf(p, space, " RAMID='L2 internal metadata'");
+ break;
+ default:
+ count = scnprintf(p, space, " RAMID='unknown'");
+ break;
+ }
+
+ p += count;
+ space -= count;
+
+ count = scnprintf(p, space,
+ " repeat=%d, other=%d (L2MERRSR_EL1=0x%llx)",
+ repeat, other, val);
+
+ for (i = 0; i < repeat; i++) {
+ if (fatal)
+ edac_device_handle_ue(edac_dev, 0, 0, msg);
+ else
+ edac_device_handle_ce(edac_dev, 0, 0, msg);
+ }
+}
+
+static void al_l2_edac_check(struct edac_device_ctl_info *edac_dev)
+{
+ struct al_l2_edac *al_l2 = edac_dev->pvt_info;
+ struct al_l2_cache *l2_cache;
+
+ list_for_each_entry(l2_cache, &al_l2->l2_caches, list_node)
+ smp_call_function_any(&l2_cache->cluster_cpus,
+ al_l2_edac_l2merrsr_read_status,
+ edac_dev, 1);
+}
+
+static int al_l2_edac_probe(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *edac_dev;
+ struct al_l2_edac *al_l2;
+ struct device *dev = &pdev->dev;
+ int ret, i;
+
+ edac_dev = edac_device_alloc_ctl_info(sizeof(*al_l2), DRV_NAME, 1, "L",
+ 1, 2, NULL, 0,
+ edac_device_alloc_index());
+ if (!edac_dev)
+ return -ENOMEM;
+
+ al_l2 = edac_dev->pvt_info;
+ edac_dev->edac_check = al_l2_edac_check;
+ edac_dev->dev = dev;
+ edac_dev->mod_name = DRV_NAME;
+ edac_dev->dev_name = dev_name(dev);
+ edac_dev->ctl_name = "L2_cache";
+ platform_set_drvdata(pdev, edac_dev);
+
+ INIT_LIST_HEAD(&al_l2->l2_caches);
+
+ for_each_possible_cpu(i) {
+ struct device_node *cpu;
+ struct device_node *cpu_cache;
+ struct al_l2_cache *l2_cache;
+ bool found = false;
+
+ cpu = of_get_cpu_node(i, NULL);
+ if (!cpu)
+ continue;
+
+ cpu_cache = of_find_next_cache_node(cpu);
+ list_for_each_entry(l2_cache, &al_l2->l2_caches, list_node) {
+ if (l2_cache->of_node == cpu_cache) {
+ found = true;
+ break;
+ }
+ }
+
+ if (found) {
+ cpumask_set_cpu(i, &l2_cache->cluster_cpus);
+ } else {
+ l2_cache = devm_kzalloc(dev, sizeof(*l2_cache),
+ GFP_KERNEL);
+ l2_cache->of_node = cpu_cache;
+ list_add(&l2_cache->list_node, &al_l2->l2_caches);
+ cpumask_set_cpu(i, &l2_cache->cluster_cpus);
+ }
+
+ of_node_put(cpu);
+ }
+
+ if (list_empty(&al_l2->l2_caches)) {
+ dev_err(dev, "L2 Cache list is empty for EDAC device\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = edac_device_add_device(edac_dev);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ dev_err(dev, "Failed to add L2 edac device (%d)\n", ret);
+ edac_device_free_ctl_info(edac_dev);
+
+ return ret;
+}
+
+static int al_l2_edac_remove(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *edac_dev = platform_get_drvdata(pdev);
+
+ edac_device_del_device(edac_dev->dev);
+ edac_device_free_ctl_info(edac_dev);
+
+ return 0;
+}
+
+static const struct of_device_id al_l2_edac_of_match[] = {
+ { .compatible = "al,alpine-v2" },
+ { .compatible = "amazon,alpine-v3" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, al_l2_edac_of_match);
+
+static struct platform_driver al_l2_edac_driver = {
+ .probe = al_l2_edac_probe,
+ .remove = al_l2_edac_remove,
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
+
+static struct platform_device *edac_l2_device;
+
+static int __init al_l2_init(void)
+{
+ struct device_node *root = of_find_node_by_path("/");
+ int ret;
+
+ if (!of_match_node(al_l2_edac_of_match, root))
+ return 0;
+
+ ret = platform_driver_register(&al_l2_edac_driver);
+ if (ret) {
+ pr_err("Failed to register %s (%d)\n", DRV_NAME, ret);
+ return ret;
+ }
+
+ edac_l2_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+ if (IS_ERR(edac_l2_device)) {
+ pr_err("Failed to register EDAC AL L2 platform device\n");
+ return PTR_ERR(edac_l2_device);
+ }
+
+ return 0;
+}
+
+static void __exit al_l2_exit(void)
+{
+ platform_device_unregister(edac_l2_device);
+ platform_driver_unregister(&al_l2_edac_driver);
+}
+
+late_initcall(al_l2_init);
+module_exit(al_l2_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hanna Hawa <[email protected]>");
+MODULE_DESCRIPTION("Amazon's Annapurna Lab's L2 EDAC Driver");
--
2.17.1

2019-10-07 15:19:40

by Hanna Hawa

[permalink] [raw]
Subject: [PATCH v6 1/3] edac: Add support for Amazon's Annapurna Labs L1 EDAC

Adds support for Amazon's Annapurna Labs L1 EDAC driver to detect and
report L1 errors.

Signed-off-by: Hanna Hawa <[email protected]>
---
MAINTAINERS | 5 +
drivers/edac/Kconfig | 8 ++
drivers/edac/Makefile | 1 +
drivers/edac/al_l1_edac.c | 190 ++++++++++++++++++++++++++++++++++++++
4 files changed, 204 insertions(+)
create mode 100644 drivers/edac/al_l1_edac.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 77eae44bf5de..7887a62dc843 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -743,6 +743,11 @@ F: drivers/tty/serial/altera_jtaguart.c
F: include/linux/altera_uart.h
F: include/linux/altera_jtaguart.h

+AMAZON ANNAPURNA LABS L1 EDAC
+M: Hanna Hawa <[email protected]>
+S: Maintained
+F: drivers/edac/al_l1_edac.c
+
AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
M: Talel Shenhar <[email protected]>
S: Maintained
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 200c04ce5b0e..e8161d7c7469 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -74,6 +74,14 @@ config EDAC_GHES

In doubt, say 'Y'.

+config EDAC_AL_L1
+ tristate "Amazon's Annapurna Labs L1 EDAC"
+ depends on ARCH_ALPINE
+ help
+ Support for L1 error detection and correction
+ for Amazon's Annapurna Labs SoCs.
+ This driver detects errors of L1 caches.
+
config EDAC_AMD64
tristate "AMD64 (Opteron, Athlon64)"
depends on AMD_NB && EDAC_DECODE_MCE
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 165ca65e1a3a..caa2dc91e8a0 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_EDAC_GHES) += ghes_edac.o
edac_mce_amd-y := mce_amd.o
obj-$(CONFIG_EDAC_DECODE_MCE) += edac_mce_amd.o

+obj-$(CONFIG_EDAC_AL_L1) += al_l1_edac.o
obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o
obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o
obj-$(CONFIG_EDAC_I5000) += i5000_edac.o
diff --git a/drivers/edac/al_l1_edac.c b/drivers/edac/al_l1_edac.c
new file mode 100644
index 000000000000..e363a80b4d13
--- /dev/null
+++ b/drivers/edac/al_l1_edac.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+
+#include <asm/sysreg.h>
+#include <linux/bitfield.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+
+#include "edac_device.h"
+#include "edac_module.h"
+
+#define DRV_NAME "al_l1_edac"
+
+/* Same bit assignments of CPUMERRSR_EL1 in ARM CA57/CA72 */
+#define ARM_CA57_CPUMERRSR_EL1 sys_reg(3, 1, 15, 2, 2)
+#define ARM_CA57_CPUMERRSR_RAM_ID GENMASK(30, 24)
+#define ARM_CA57_L1_I_TAG_RAM 0x00
+#define ARM_CA57_L1_I_DATA_RAM 0x01
+#define ARM_CA57_L1_D_TAG_RAM 0x08
+#define ARM_CA57_L1_D_DATA_RAM 0x09
+#define ARM_CA57_L2_TLB_RAM 0x18
+#define ARM_CA57_CPUMERRSR_VALID BIT(31)
+#define ARM_CA57_CPUMERRSR_REPEAT GENMASK_ULL(39, 32)
+#define ARM_CA57_CPUMERRSR_OTHER GENMASK_ULL(47, 40)
+#define ARM_CA57_CPUMERRSR_FATAL BIT_ULL(63)
+
+#define AL_L1_EDAC_MSG_MAX 256
+
+static void al_l1_edac_cpumerrsr_read_status(void *arg)
+{
+ struct edac_device_ctl_info *edac_dev = arg;
+ int cpu, i, space, count;
+ u32 ramid, repeat, other, fatal;
+ u64 val;
+ char msg[AL_L1_EDAC_MSG_MAX];
+ char *p;
+
+ val = read_sysreg_s(ARM_CA57_CPUMERRSR_EL1);
+ if (!(FIELD_GET(ARM_CA57_CPUMERRSR_VALID, val)))
+ return;
+
+ write_sysreg_s(0, ARM_CA57_CPUMERRSR_EL1);
+
+ cpu = smp_processor_id();
+ ramid = FIELD_GET(ARM_CA57_CPUMERRSR_RAM_ID, val);
+ repeat = FIELD_GET(ARM_CA57_CPUMERRSR_REPEAT, val);
+ other = FIELD_GET(ARM_CA57_CPUMERRSR_OTHER, val);
+ fatal = FIELD_GET(ARM_CA57_CPUMERRSR_FATAL, val);
+
+ space = sizeof(msg);
+ p = msg;
+ count = scnprintf(p, space, "CPU%d L1 %serror detected", cpu,
+ (fatal) ? "Fatal " : "");
+ p += count;
+ space -= count;
+
+ switch (ramid) {
+ case ARM_CA57_L1_I_TAG_RAM:
+ count = scnprintf(p, space, " RAMID='L1-I Tag RAM'");
+ break;
+ case ARM_CA57_L1_I_DATA_RAM:
+ count = scnprintf(p, space, " RAMID='L1-I Data RAM'");
+ break;
+ case ARM_CA57_L1_D_TAG_RAM:
+ count = scnprintf(p, space, " RAMID='L1-D Tag RAM'");
+ break;
+ case ARM_CA57_L1_D_DATA_RAM:
+ count = scnprintf(p, space, " RAMID='L1-D Data RAM'");
+ break;
+ case ARM_CA57_L2_TLB_RAM:
+ count = scnprintf(p, space, " RAMID='L2 TLB RAM'");
+ break;
+ default:
+ count = scnprintf(p, space, " RAMID='unknown'");
+ break;
+ }
+
+ p += count;
+ space -= count;
+ count = scnprintf(p, space,
+ " repeat=%d, other=%d (CPUMERRSR_EL1=0x%llx)",
+ repeat, other, val);
+
+ for (i = 0; i < repeat; i++) {
+ if (fatal)
+ edac_device_handle_ue(edac_dev, 0, 0, msg);
+ else
+ edac_device_handle_ce(edac_dev, 0, 0, msg);
+ }
+}
+
+static void al_l1_edac_check(struct edac_device_ctl_info *edac_dev)
+{
+ on_each_cpu(al_l1_edac_cpumerrsr_read_status, edac_dev, 1);
+}
+
+static int al_l1_edac_probe(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *edac_dev;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ edac_dev = edac_device_alloc_ctl_info(0, DRV_NAME, 1, "L", 1, 1, NULL,
+ 0, edac_device_alloc_index());
+ if (!edac_dev)
+ return -ENOMEM;
+
+ edac_dev->edac_check = al_l1_edac_check;
+ edac_dev->dev = dev;
+ edac_dev->mod_name = DRV_NAME;
+ edac_dev->dev_name = dev_name(dev);
+ edac_dev->ctl_name = "L1_cache";
+ platform_set_drvdata(pdev, edac_dev);
+
+ ret = edac_device_add_device(edac_dev);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ dev_err(dev, "Failed to add L1 edac device (%d)\n", ret);
+ edac_device_free_ctl_info(edac_dev);
+
+ return ret;
+}
+
+static int al_l1_edac_remove(struct platform_device *pdev)
+{
+ struct edac_device_ctl_info *edac_dev = platform_get_drvdata(pdev);
+
+ edac_device_del_device(edac_dev->dev);
+ edac_device_free_ctl_info(edac_dev);
+
+ return 0;
+}
+
+static const struct of_device_id al_l1_edac_of_match[] = {
+ { .compatible = "al,alpine-v2" },
+ { .compatible = "amazon,alpine-v3" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, al_l1_edac_of_match);
+
+static struct platform_driver al_l1_edac_driver = {
+ .probe = al_l1_edac_probe,
+ .remove = al_l1_edac_remove,
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
+
+static struct platform_device *edac_l1_device;
+
+static int __init al_l1_init(void)
+{
+ struct device_node *root = of_find_node_by_path("/");
+ int ret;
+
+ if (!of_match_node(al_l1_edac_of_match, root))
+ return 0;
+
+ ret = platform_driver_register(&al_l1_edac_driver);
+ if (ret) {
+ pr_err("Failed to register %s (%d)\n", DRV_NAME, ret);
+ return ret;
+ }
+
+ edac_l1_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+ if (IS_ERR(edac_l1_device)) {
+ pr_err("Failed to register EDAC AL L1 platform device\n");
+ return PTR_ERR(edac_l1_device);
+ }
+
+ return 0;
+}
+
+static void __exit al_l1_exit(void)
+{
+ platform_device_unregister(edac_l1_device);
+ platform_driver_unregister(&al_l1_edac_driver);
+}
+
+late_initcall(al_l1_init);
+module_exit(al_l1_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Hanna Hawa <[email protected]>");
+MODULE_DESCRIPTION("Amazon's Annapurna Lab's L1 EDAC Driver");
--
2.17.1

2019-10-07 15:27:45

by Hanna Hawa

[permalink] [raw]
Subject: [PATCH v6 2/3] of: EXPORT_SYMBOL_GPL of_find_next_cache_node

Make of_find_next_cache_node() available for modules.

Signed-off-by: Hanna Hawa <[email protected]>
---
drivers/of/base.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/of/base.c b/drivers/of/base.c
index 20e0e7ee4edf..fe22c7428958 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -2172,6 +2172,7 @@ struct device_node *of_find_next_cache_node(const struct device_node *np)

return NULL;
}
+EXPORT_SYMBOL_GPL(of_find_next_cache_node);

/**
* of_find_last_cache_level - Find the level at which the last cache is
--
2.17.1

2019-10-09 23:11:13

by Rob Herring

[permalink] [raw]
Subject: Re: [PATCH v6 3/3] edac: Add support for Amazon's Annapurna Labs L2 EDAC

+Sudeep

On Mon, Oct 7, 2019 at 10:18 AM Hanna Hawa <[email protected]> wrote:
>
> Adds support for Amazon's Annapurna Labs L2 EDAC driver to detect and
> report L2 errors.

I was curious why you needed a DT cache parsing function...

[...]

> +static int al_l2_edac_probe(struct platform_device *pdev)
> +{
> + struct edac_device_ctl_info *edac_dev;
> + struct al_l2_edac *al_l2;
> + struct device *dev = &pdev->dev;
> + int ret, i;
> +
> + edac_dev = edac_device_alloc_ctl_info(sizeof(*al_l2), DRV_NAME, 1, "L",
> + 1, 2, NULL, 0,
> + edac_device_alloc_index());
> + if (!edac_dev)
> + return -ENOMEM;
> +
> + al_l2 = edac_dev->pvt_info;
> + edac_dev->edac_check = al_l2_edac_check;
> + edac_dev->dev = dev;
> + edac_dev->mod_name = DRV_NAME;
> + edac_dev->dev_name = dev_name(dev);
> + edac_dev->ctl_name = "L2_cache";
> + platform_set_drvdata(pdev, edac_dev);
> +
> + INIT_LIST_HEAD(&al_l2->l2_caches);
> +
> + for_each_possible_cpu(i) {
> + struct device_node *cpu;
> + struct device_node *cpu_cache;
> + struct al_l2_cache *l2_cache;
> + bool found = false;
> +
> + cpu = of_get_cpu_node(i, NULL);
> + if (!cpu)
> + continue;
> +
> + cpu_cache = of_find_next_cache_node(cpu);
> + list_for_each_entry(l2_cache, &al_l2->l2_caches, list_node) {
> + if (l2_cache->of_node == cpu_cache) {
> + found = true;
> + break;
> + }
> + }
> +
> + if (found) {
> + cpumask_set_cpu(i, &l2_cache->cluster_cpus);
> + } else {
> + l2_cache = devm_kzalloc(dev, sizeof(*l2_cache),
> + GFP_KERNEL);
> + l2_cache->of_node = cpu_cache;
> + list_add(&l2_cache->list_node, &al_l2->l2_caches);
> + cpumask_set_cpu(i, &l2_cache->cluster_cpus);
> + }
> +
> + of_node_put(cpu);
> + }

We already have what's probably similar code to parse DT and populate
cacheinfo data. Does that not work for you? If not, why not and can we
extend it?

Then your driver might work if the data comes from ACPI instead (or
maybe that's all different, I don't know).

Rob

2019-10-09 23:23:14

by Rob Herring

[permalink] [raw]
Subject: Re: [PATCH v6 3/3] edac: Add support for Amazon's Annapurna Labs L2 EDAC

On Mon, Oct 7, 2019 at 10:18 AM Hanna Hawa <[email protected]> wrote:
>
> Adds support for Amazon's Annapurna Labs L2 EDAC driver to detect and
> report L2 errors.
>
> Signed-off-by: Hanna Hawa <[email protected]>
> ---
> MAINTAINERS | 5 +
> drivers/edac/Kconfig | 8 ++
> drivers/edac/Makefile | 1 +
> drivers/edac/al_l2_edac.c | 251 ++++++++++++++++++++++++++++++++++++++
> 4 files changed, 265 insertions(+)
> create mode 100644 drivers/edac/al_l2_edac.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7887a62dc843..0eabcfcf91a9 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -748,6 +748,11 @@ M: Hanna Hawa <[email protected]>
> S: Maintained
> F: drivers/edac/al_l1_edac.c
>
> +AMAZON ANNAPURNA LABS L2 EDAC
> +M: Hanna Hawa <[email protected]>
> +S: Maintained
> +F: drivers/edac/al_l2_edac.c
> +
> AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
> M: Talel Shenhar <[email protected]>
> S: Maintained
> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index e8161d7c7469..cb394aff1cab 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -82,6 +82,14 @@ config EDAC_AL_L1
> for Amazon's Annapurna Labs SoCs.
> This driver detects errors of L1 caches.
>
> +config EDAC_AL_L2
> + tristate "Amazon's Annapurna Labs L2 EDAC"

I still think this should be an "A57 L2 ECC" driver, but if no one
cares I'll shut up and the 2nd person can rename everything.

> + depends on ARCH_ALPINE

|| COMPILE_TEST

Maybe it needs an ARM64 dependency too in this case?

> + help
> + Support for L2 error detection and correction
> + for Amazon's Annapurna Labs SoCs.
> + This driver detects errors of L2 caches.
> +

> +
> + ret = platform_driver_register(&al_l2_edac_driver);
> + if (ret) {
> + pr_err("Failed to register %s (%d)\n", DRV_NAME, ret);
> + return ret;
> + }
> +
> + edac_l2_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
> + if (IS_ERR(edac_l2_device)) {
> + pr_err("Failed to register EDAC AL L2 platform device\n");
> + return PTR_ERR(edac_l2_device);
> + }
> +
> + return 0;
> +}
> +
> +static void __exit al_l2_exit(void)
> +{
> + platform_device_unregister(edac_l2_device);
> + platform_driver_unregister(&al_l2_edac_driver);
> +}
> +
> +late_initcall(al_l2_init);
> +module_exit(al_l2_exit);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Hanna Hawa <[email protected]>");
> +MODULE_DESCRIPTION("Amazon's Annapurna Lab's L2 EDAC Driver");
> --
> 2.17.1
>

2019-10-10 14:05:59

by Hanna Hawa

[permalink] [raw]
Subject: Re: [PATCH v6 3/3] edac: Add support for Amazon's Annapurna Labs L2 EDAC

Hi,


On 10/10/2019 2:19 AM, Rob Herring wrote:
> On Mon, Oct 7, 2019 at 10:18 AM Hanna Hawa <[email protected]> wrote:
>>
>> Adds support for Amazon's Annapurna Labs L2 EDAC driver to detect and
>> report L2 errors.
>>
>> Signed-off-by: Hanna Hawa <[email protected]>
>> ---
>> MAINTAINERS | 5 +
>> drivers/edac/Kconfig | 8 ++
>> drivers/edac/Makefile | 1 +
>> drivers/edac/al_l2_edac.c | 251 ++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 265 insertions(+)
>> create mode 100644 drivers/edac/al_l2_edac.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 7887a62dc843..0eabcfcf91a9 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -748,6 +748,11 @@ M: Hanna Hawa <[email protected]>
>> S: Maintained
>> F: drivers/edac/al_l1_edac.c
>>
>> +AMAZON ANNAPURNA LABS L2 EDAC
>> +M: Hanna Hawa <[email protected]>
>> +S: Maintained
>> +F: drivers/edac/al_l2_edac.c
>> +
>> AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER
>> M: Talel Shenhar <[email protected]>
>> S: Maintained
>> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
>> index e8161d7c7469..cb394aff1cab 100644
>> --- a/drivers/edac/Kconfig
>> +++ b/drivers/edac/Kconfig
>> @@ -82,6 +82,14 @@ config EDAC_AL_L1
>> for Amazon's Annapurna Labs SoCs.
>> This driver detects errors of L1 caches.
>>
>> +config EDAC_AL_L2
>> + tristate "Amazon's Annapurna Labs L2 EDAC"
>
> I still think this should be an "A57 L2 ECC" driver, but if no one
> cares I'll shut up and the 2nd person can rename everything.

>
>> + depends on ARCH_ALPINE
>
> || COMPILE_TEST

Will be add in next patchset.

>
> Maybe it needs an ARM64 dependency too in this case?

Yes, it need ARM64 dependency, I'll add.

Thanks,
Hanna

>
>> + help
>> + Support for L2 error detection and correction
>> + for Amazon's Annapurna Labs SoCs.
>> + This driver detects errors of L2 caches.
>> +
>
>> +
>> + ret = platform_driver_register(&al_l2_edac_driver);
>> + if (ret) {
>> + pr_err("Failed to register %s (%d)\n", DRV_NAME, ret);
>> + return ret;
>> + }
>> +
>> + edac_l2_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
>> + if (IS_ERR(edac_l2_device)) {
>> + pr_err("Failed to register EDAC AL L2 platform device\n");
>> + return PTR_ERR(edac_l2_device);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void __exit al_l2_exit(void)
>> +{
>> + platform_device_unregister(edac_l2_device);
>> + platform_driver_unregister(&al_l2_edac_driver);
>> +}
>> +
>> +late_initcall(al_l2_init);
>> +module_exit(al_l2_exit);
>> +
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("Hanna Hawa <[email protected]>");
>> +MODULE_DESCRIPTION("Amazon's Annapurna Lab's L2 EDAC Driver");
>> --
>> 2.17.1
>>

2019-10-10 14:31:30

by Hanna Hawa

[permalink] [raw]
Subject: Re: [PATCH v6 3/3] edac: Add support for Amazon's Annapurna Labs L2 EDAC



On 10/10/2019 2:09 AM, Rob Herring wrote:
> +Sudeep
>
> On Mon, Oct 7, 2019 at 10:18 AM Hanna Hawa <[email protected]> wrote:
>>
>> Adds support for Amazon's Annapurna Labs L2 EDAC driver to detect and
>> report L2 errors.
>
> I was curious why you needed a DT cache parsing function...
>
> [...]
>
>> +static int al_l2_edac_probe(struct platform_device *pdev)
>> +{
>> + struct edac_device_ctl_info *edac_dev;
>> + struct al_l2_edac *al_l2;
>> + struct device *dev = &pdev->dev;
>> + int ret, i;
>> +
>> + edac_dev = edac_device_alloc_ctl_info(sizeof(*al_l2), DRV_NAME, 1, "L",
>> + 1, 2, NULL, 0,
>> + edac_device_alloc_index());
>> + if (!edac_dev)
>> + return -ENOMEM;
>> +
>> + al_l2 = edac_dev->pvt_info;
>> + edac_dev->edac_check = al_l2_edac_check;
>> + edac_dev->dev = dev;
>> + edac_dev->mod_name = DRV_NAME;
>> + edac_dev->dev_name = dev_name(dev);
>> + edac_dev->ctl_name = "L2_cache";
>> + platform_set_drvdata(pdev, edac_dev);
>> +
>> + INIT_LIST_HEAD(&al_l2->l2_caches);
>> +
>> + for_each_possible_cpu(i) {
>> + struct device_node *cpu;
>> + struct device_node *cpu_cache;
>> + struct al_l2_cache *l2_cache;
>> + bool found = false;
>> +
>> + cpu = of_get_cpu_node(i, NULL);
>> + if (!cpu)
>> + continue;
>> +
>> + cpu_cache = of_find_next_cache_node(cpu);
>> + list_for_each_entry(l2_cache, &al_l2->l2_caches, list_node) {
>> + if (l2_cache->of_node == cpu_cache) {
>> + found = true;
>> + break;
>> + }
>> + }
>> +
>> + if (found) {
>> + cpumask_set_cpu(i, &l2_cache->cluster_cpus);
>> + } else {
>> + l2_cache = devm_kzalloc(dev, sizeof(*l2_cache),
>> + GFP_KERNEL);
>> + l2_cache->of_node = cpu_cache;
>> + list_add(&l2_cache->list_node, &al_l2->l2_caches);
>> + cpumask_set_cpu(i, &l2_cache->cluster_cpus);
>> + }
>> +
>> + of_node_put(cpu);
>> + }
>
> We already have what's probably similar code to parse DT and populate
> cacheinfo data. Does that not work for you? If not, why not and can we
> extend it?

As I saw in cacheinfo it will return the cacheinfo for the online CPUs
only, correct me if I'm wrong..

Here I'm parsing all the L2 info for all CPUs depends on DT to get
"cluster_cpus", and using smp_call_function_any() will call the online
cpu to read the L2MERRSR status register.

>
> Then your driver might work if the data comes from ACPI instead (or
> maybe that's all different, I don't know).

No plan to get it work on ACPI, at least in the near future.

>
> Rob
>