Requesting a graceful shutdown through the shared memory state signals
will not be acked in the event that sysmon has already successfully shut
down the remote firmware. So extend the stop request API to optinally
take the remoteproc's sysmon instance and query if there's already been
a successful shutdown attempt, before doing the signal dance.
Signed-off-by: Bjorn Andersson <[email protected]>
---
Changes since v1:
- New patch
drivers/remoteproc/qcom_q6v5.c | 8 +++++++-
drivers/remoteproc/qcom_q6v5.h | 3 ++-
drivers/remoteproc/qcom_q6v5_adsp.c | 2 +-
drivers/remoteproc/qcom_q6v5_mss.c | 2 +-
drivers/remoteproc/qcom_q6v5_pas.c | 2 +-
drivers/remoteproc/qcom_q6v5_wcss.c | 2 +-
6 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
index fd6fd36268d9..9627a950928e 100644
--- a/drivers/remoteproc/qcom_q6v5.c
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -13,6 +13,7 @@
#include <linux/soc/qcom/smem.h>
#include <linux/soc/qcom/smem_state.h>
#include <linux/remoteproc.h>
+#include "qcom_common.h"
#include "qcom_q6v5.h"
#define Q6V5_PANIC_DELAY_MS 200
@@ -146,15 +147,20 @@ static irqreturn_t q6v5_stop_interrupt(int irq, void *data)
/**
* qcom_q6v5_request_stop() - request the remote processor to stop
* @q6v5: reference to qcom_q6v5 context
+ * @sysmon: reference to the remote's sysmon instance, or NULL
*
* Return: 0 on success, negative errno on failure
*/
-int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5)
+int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5, struct qcom_sysmon *sysmon)
{
int ret;
q6v5->running = false;
+ /* Don't perform SMP2P dance if sysmon already shut down the remote */
+ if (qcom_sysmon_shutdown_acked(sysmon))
+ return 0;
+
qcom_smem_state_update_bits(q6v5->state,
BIT(q6v5->stop_bit), BIT(q6v5->stop_bit));
diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
index c4ed887c1499..1c212f670cbc 100644
--- a/drivers/remoteproc/qcom_q6v5.h
+++ b/drivers/remoteproc/qcom_q6v5.h
@@ -8,6 +8,7 @@
struct rproc;
struct qcom_smem_state;
+struct qcom_sysmon;
struct qcom_q6v5 {
struct device *dev;
@@ -40,7 +41,7 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
-int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5);
+int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5, struct qcom_sysmon *sysmon);
int qcom_q6v5_wait_for_start(struct qcom_q6v5 *q6v5, int timeout);
unsigned long qcom_q6v5_panic(struct qcom_q6v5 *q6v5);
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index efb2c1aa80a3..9db0380236e7 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -264,7 +264,7 @@ static int adsp_stop(struct rproc *rproc)
int handover;
int ret;
- ret = qcom_q6v5_request_stop(&adsp->q6v5);
+ ret = qcom_q6v5_request_stop(&adsp->q6v5, adsp->sysmon);
if (ret == -ETIMEDOUT)
dev_err(adsp->dev, "timed out on wait\n");
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 9a473cfef758..501764934014 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -1370,7 +1370,7 @@ static int q6v5_stop(struct rproc *rproc)
struct q6v5 *qproc = (struct q6v5 *)rproc->priv;
int ret;
- ret = qcom_q6v5_request_stop(&qproc->q6v5);
+ ret = qcom_q6v5_request_stop(&qproc->q6v5, qproc->sysmon);
if (ret == -ETIMEDOUT)
dev_err(qproc->dev, "timed out on wait\n");
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 3837f23995e0..ed1772bfa55d 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -214,7 +214,7 @@ static int adsp_stop(struct rproc *rproc)
int handover;
int ret;
- ret = qcom_q6v5_request_stop(&adsp->q6v5);
+ ret = qcom_q6v5_request_stop(&adsp->q6v5, adsp->sysmon);
if (ret == -ETIMEDOUT)
dev_err(adsp->dev, "timed out on wait\n");
diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 8846ef0b0f1a..d6639856069b 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -390,7 +390,7 @@ static int q6v5_wcss_stop(struct rproc *rproc)
int ret;
/* WCSS powerdown */
- ret = qcom_q6v5_request_stop(&wcss->q6v5);
+ ret = qcom_q6v5_request_stop(&wcss->q6v5, wcss->sysmon);
if (ret == -ETIMEDOUT) {
dev_err(wcss->dev, "timed out on wait\n");
return ret;
--
2.28.0
On 2020-11-04 20:50, Bjorn Andersson wrote:
> Requesting a graceful shutdown through the shared memory state signals
> will not be acked in the event that sysmon has already successfully
> shut
> down the remote firmware. So extend the stop request API to optinally
optionally
> take the remoteproc's sysmon instance and query if there's already been
> a successful shutdown attempt, before doing the signal dance.
>
> Signed-off-by: Bjorn Andersson <[email protected]>
> ---
>
> Changes since v1:
> - New patch
>
> drivers/remoteproc/qcom_q6v5.c | 8 +++++++-
> drivers/remoteproc/qcom_q6v5.h | 3 ++-
> drivers/remoteproc/qcom_q6v5_adsp.c | 2 +-
> drivers/remoteproc/qcom_q6v5_mss.c | 2 +-
> drivers/remoteproc/qcom_q6v5_pas.c | 2 +-
> drivers/remoteproc/qcom_q6v5_wcss.c | 2 +-
> 6 files changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/remoteproc/qcom_q6v5.c
> b/drivers/remoteproc/qcom_q6v5.c
> index fd6fd36268d9..9627a950928e 100644
> --- a/drivers/remoteproc/qcom_q6v5.c
> +++ b/drivers/remoteproc/qcom_q6v5.c
> @@ -13,6 +13,7 @@
> #include <linux/soc/qcom/smem.h>
> #include <linux/soc/qcom/smem_state.h>
> #include <linux/remoteproc.h>
> +#include "qcom_common.h"
> #include "qcom_q6v5.h"
>
> #define Q6V5_PANIC_DELAY_MS 200
> @@ -146,15 +147,20 @@ static irqreturn_t q6v5_stop_interrupt(int irq,
> void *data)
> /**
> * qcom_q6v5_request_stop() - request the remote processor to stop
> * @q6v5: reference to qcom_q6v5 context
> + * @sysmon: reference to the remote's sysmon instance, or NULL
> *
> * Return: 0 on success, negative errno on failure
> */
> -int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5)
> +int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5, struct qcom_sysmon
> *sysmon)
> {
> int ret;
>
> q6v5->running = false;
>
> + /* Don't perform SMP2P dance if sysmon already shut down the remote
> */
> + if (qcom_sysmon_shutdown_acked(sysmon))
> + return 0;
> +
> qcom_smem_state_update_bits(q6v5->state,
> BIT(q6v5->stop_bit), BIT(q6v5->stop_bit));
>
> diff --git a/drivers/remoteproc/qcom_q6v5.h
> b/drivers/remoteproc/qcom_q6v5.h
> index c4ed887c1499..1c212f670cbc 100644
> --- a/drivers/remoteproc/qcom_q6v5.h
> +++ b/drivers/remoteproc/qcom_q6v5.h
> @@ -8,6 +8,7 @@
>
> struct rproc;
> struct qcom_smem_state;
> +struct qcom_sysmon;
>
> struct qcom_q6v5 {
> struct device *dev;
> @@ -40,7 +41,7 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct
> platform_device *pdev,
>
> int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
> int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
> -int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5);
> +int qcom_q6v5_request_stop(struct qcom_q6v5 *q6v5, struct qcom_sysmon
> *sysmon);
> int qcom_q6v5_wait_for_start(struct qcom_q6v5 *q6v5, int timeout);
> unsigned long qcom_q6v5_panic(struct qcom_q6v5 *q6v5);
>
> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c
> b/drivers/remoteproc/qcom_q6v5_adsp.c
> index efb2c1aa80a3..9db0380236e7 100644
> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> @@ -264,7 +264,7 @@ static int adsp_stop(struct rproc *rproc)
> int handover;
> int ret;
>
> - ret = qcom_q6v5_request_stop(&adsp->q6v5);
> + ret = qcom_q6v5_request_stop(&adsp->q6v5, adsp->sysmon);
> if (ret == -ETIMEDOUT)
> dev_err(adsp->dev, "timed out on wait\n");
>
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c
> b/drivers/remoteproc/qcom_q6v5_mss.c
> index 9a473cfef758..501764934014 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -1370,7 +1370,7 @@ static int q6v5_stop(struct rproc *rproc)
> struct q6v5 *qproc = (struct q6v5 *)rproc->priv;
> int ret;
>
> - ret = qcom_q6v5_request_stop(&qproc->q6v5);
> + ret = qcom_q6v5_request_stop(&qproc->q6v5, qproc->sysmon);
> if (ret == -ETIMEDOUT)
> dev_err(qproc->dev, "timed out on wait\n");
>
> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c
> b/drivers/remoteproc/qcom_q6v5_pas.c
> index 3837f23995e0..ed1772bfa55d 100644
> --- a/drivers/remoteproc/qcom_q6v5_pas.c
> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> @@ -214,7 +214,7 @@ static int adsp_stop(struct rproc *rproc)
> int handover;
> int ret;
>
> - ret = qcom_q6v5_request_stop(&adsp->q6v5);
> + ret = qcom_q6v5_request_stop(&adsp->q6v5, adsp->sysmon);
> if (ret == -ETIMEDOUT)
> dev_err(adsp->dev, "timed out on wait\n");
>
> diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c
> b/drivers/remoteproc/qcom_q6v5_wcss.c
> index 8846ef0b0f1a..d6639856069b 100644
> --- a/drivers/remoteproc/qcom_q6v5_wcss.c
> +++ b/drivers/remoteproc/qcom_q6v5_wcss.c
> @@ -390,7 +390,7 @@ static int q6v5_wcss_stop(struct rproc *rproc)
> int ret;
>
> /* WCSS powerdown */
> - ret = qcom_q6v5_request_stop(&wcss->q6v5);
> + ret = qcom_q6v5_request_stop(&wcss->q6v5, wcss->sysmon);
> if (ret == -ETIMEDOUT) {
> dev_err(wcss->dev, "timed out on wait\n");
> return ret;
Reviewed-by: Rishabh Bhatnagar <[email protected]>