Hi,
The patchset is based on David Miller's "net-next" repo.
The patchset extends the Broadcom iProc mdio mux to add support for
suspend/resume and the ability to configure the internal clock
divider. The patchset also sets the scan control register to
disable external master access.
The base address of the mdio-mux-bcm-iproc is modified to point to the
start of the mdio block's address space, to be able to access all the
mdio's registers. The missing registers are required to configure the
internal clock divider registers in some of the Broadcom SoC's.
Changes from v3:
- Removed 'platform_set_drvdata(pdev, NULL)' call (in patch 5/8)
- Fixed the return code handling for the devm_clk_get() call (in patch
7/8)
- Added Reviewed-by tag to Patch 8/8
Changes from v2:
- Addressed Andrew's comments:
- Moved to using devm_mdiobus_alloc. Added this as a separate patch.
- Changed to reverse christmas tree order for variable declaration in
the clock patch
- Addressed Florian's comments:
- Removed null checks for the clock before calling unprepare in
both clock and pm patches.
- Added check for EPROBE_DEFER when fetching the clock in the clock
patch.
- The patch to use the devm API has been added before the clock & pm
patches. This patch is now patch '5' in the series.
- Added reviewed-by tags to commit messages of patches which remain
unmodified from v2.
- Modified PM patch to use platform_get_drvdata() in suspend/resume
API's, similar to the recent fix that went in for the remove()
api.
Changes from v1:
- Addressed Andrew's comments.
- Reworked the patches to be based on 'net-next'
- Removed 'fixes' from the commit messages, the changes are related
to the new features being added.
- Maintained backward compatibility to older dt-blob's specifying
base addresse with an offset. The correction is applied in the
driver and a message is printed to update the dt-blob.
- Re-worked and re-ordered the last four patches (4-7).
- Added setting of the scan control register as a new patch
- Added a call to 'clk_prepare_enable()' in the patch that adds
the clock config support, removed the debug message when clock
is not passed.
- Simplified the pm support patch (removed the array used for the
save/restore logic).
Thanks
Arun Parameswaran (8):
dt-bindings: net: Fix Broadcom iProc mdio mux driver base address
net: phy: Fix the register offsets in Broadcom iProc mdio mux driver
arm64: dts: Fix the base address of the Broadcom iProc mdio mux
net: phy: Disable external master access in bcm mdio mux driver
net: phy: Use devm api for mdio bus allocation in bcm iproc mdio mux
dt-bindings: net: Add clock handle to Broadcom iProc mdio mux
net: phy: Add support to configure clock in Broadcom iProc mdio mux
net: phy: Add pm support to Broadcom iProc mdio mux driver
.../bindings/net/brcm,mdio-mux-iproc.txt | 7 +-
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4 +-
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 4 +-
drivers/net/phy/mdio-mux-bcm-iproc.c | 108 ++++++++++++++++++---
4 files changed, 106 insertions(+), 17 deletions(-)
--
1.9.1
Modify the base address of the Broadcom iProc MDIO mux driver to
point to the start of the block's register address space.
Signed-off-by: Arun Parameswaran <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
index dfe287a..dc8aa68 100644
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
@@ -18,9 +18,9 @@ at- Documentation/devicetree/bindings/net/mdio-mux.txt
for example:
- mdio_mux_iproc: mdio-mux@6602023c {
+ mdio_mux_iproc: mdio-mux@66020000 {
compatible = "brcm,mdio-mux-iproc";
- reg = <0x6602023c 0x14>;
+ reg = <0x66020000 0x250>;
#address-cells = <1>;
#size-cells = <0>;
--
1.9.1
Modify the register offsets in the Broadcom iProc mdio mux to start
from the top of the register address space.
Earlier, the base address pointed to the end of the block's register
space. The base address will now point to the start of the mdio's
address space. The offsets have been fixed to match this.
Signed-off-by: Arun Parameswaran <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
---
drivers/net/phy/mdio-mux-bcm-iproc.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
index 0831b71..48bb74a 100644
--- a/drivers/net/phy/mdio-mux-bcm-iproc.c
+++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
@@ -22,7 +22,7 @@
#include <linux/mdio-mux.h>
#include <linux/delay.h>
-#define MDIO_PARAM_OFFSET 0x00
+#define MDIO_PARAM_OFFSET 0x23c
#define MDIO_PARAM_MIIM_CYCLE 29
#define MDIO_PARAM_INTERNAL_SEL 25
#define MDIO_PARAM_BUS_ID 22
@@ -30,20 +30,22 @@
#define MDIO_PARAM_PHY_ID 16
#define MDIO_PARAM_PHY_DATA 0
-#define MDIO_READ_OFFSET 0x04
+#define MDIO_READ_OFFSET 0x240
#define MDIO_READ_DATA_MASK 0xffff
-#define MDIO_ADDR_OFFSET 0x08
+#define MDIO_ADDR_OFFSET 0x244
-#define MDIO_CTRL_OFFSET 0x0C
+#define MDIO_CTRL_OFFSET 0x248
#define MDIO_CTRL_WRITE_OP 0x1
#define MDIO_CTRL_READ_OP 0x2
-#define MDIO_STAT_OFFSET 0x10
+#define MDIO_STAT_OFFSET 0x24c
#define MDIO_STAT_DONE 1
#define BUS_MAX_ADDR 32
#define EXT_BUS_START_ADDR 16
+#define MDIO_REG_ADDR_SPACE_SIZE 0x250
+
struct iproc_mdiomux_desc {
void *mux_handle;
void __iomem *base;
@@ -169,6 +171,14 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev)
md->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res->start & 0xfff) {
+ /* For backward compatibility in case the
+ * base address is specified with an offset.
+ */
+ dev_info(&pdev->dev, "fix base address in dt-blob\n");
+ res->start &= ~0xfff;
+ res->end = res->start + MDIO_REG_ADDR_SPACE_SIZE - 1;
+ }
md->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(md->base)) {
dev_err(&pdev->dev, "failed to ioremap register\n");
--
1.9.1
Modify the base address of the mdio mux driver to point to the
start of the mdio mux block's register address space.
Signed-off-by: Arun Parameswaran <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
---
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4 ++--
arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 4057197..1a406a7 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -482,9 +482,9 @@
status = "disabled";
};
- mdio_mux_iproc: mdio-mux@6602023c {
+ mdio_mux_iproc: mdio-mux@66020000 {
compatible = "brcm,mdio-mux-iproc";
- reg = <0x6602023c 0x14>;
+ reg = <0x66020000 0x250>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index b203152..a70e8dd 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -278,9 +278,9 @@
#include "stingray-pinctrl.dtsi"
- mdio_mux_iproc: mdio-mux@2023c {
+ mdio_mux_iproc: mdio-mux@20000 {
compatible = "brcm,mdio-mux-iproc";
- reg = <0x0002023c 0x14>;
+ reg = <0x00020000 0x250>;
#address-cells = <1>;
#size-cells = <0>;
--
1.9.1
Use devm_mdiobus_alloc() instead of mdiobus_alloc() in the Broadcom
iProc mdio mux driver.
Signed-off-by: Arun Parameswaran <[email protected]>
---
drivers/net/phy/mdio-mux-bcm-iproc.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
index c36ce4b..3ba9616 100644
--- a/drivers/net/phy/mdio-mux-bcm-iproc.c
+++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
@@ -198,7 +198,7 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev)
return PTR_ERR(md->base);
}
- md->mii_bus = mdiobus_alloc();
+ md->mii_bus = devm_mdiobus_alloc(&pdev->dev);
if (!md->mii_bus) {
dev_err(&pdev->dev, "mdiomux bus alloc failed\n");
return -ENOMEM;
@@ -217,7 +217,7 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev)
rc = mdiobus_register(bus);
if (rc) {
dev_err(&pdev->dev, "mdiomux registration failed\n");
- goto out;
+ return rc;
}
platform_set_drvdata(pdev, md);
@@ -236,8 +236,6 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev)
out_register:
mdiobus_unregister(bus);
-out:
- mdiobus_free(bus);
return rc;
}
@@ -247,7 +245,6 @@ static int mdio_mux_iproc_remove(struct platform_device *pdev)
mdio_mux_uninit(md->mux_handle);
mdiobus_unregister(md->mii_bus);
- mdiobus_free(md->mii_bus);
return 0;
}
--
1.9.1
Add clock phandle, of the core clock driving the mdio block, as an
optional property to the Broadcom iProc mdio mux.
The clock, when specified, will be used to setup the rate adjust registers
in the mdio to derrive the mdio's operating frequency.
Signed-off-by: Arun Parameswaran <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
index dc8aa68..b58843f 100644
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
@@ -13,6 +13,9 @@ MDIO multiplexer node:
Every non-ethernet PHY requires a compatible so that it could be probed based
on this compatible string.
+Optional properties:
+- clocks: phandle of the core clock which drives the mdio block.
+
Additional information regarding generic multiplexer properties can be found
at- Documentation/devicetree/bindings/net/mdio-mux.txt
--
1.9.1
Add support to configure the internal rate adjust register based on the
core clock supplied through device tree in the Broadcom iProc mdio mux.
The operating frequency of the mdio mux block is 11MHz. This is derrived
by dividing the clock to the mdio mux with the rate adjust register.
In some SoC's the default values of the rate adjust register do not yield
11MHz. These SoC's are required to specify the clock via the device tree
for proper operation.
Signed-off-by: Arun Parameswaran <[email protected]>
---
drivers/net/phy/mdio-mux-bcm-iproc.c | 41 ++++++++++++++++++++++++++++++++++--
1 file changed, 39 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
index 3ba9616..c608e3c4 100644
--- a/drivers/net/phy/mdio-mux-bcm-iproc.c
+++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
@@ -13,7 +13,7 @@
* You should have received a copy of the GNU General Public License
* version 2 (GPLv2) along with this source code.
*/
-
+#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/of_mdio.h>
@@ -22,6 +22,10 @@
#include <linux/mdio-mux.h>
#include <linux/delay.h>
+#define MDIO_RATE_ADJ_EXT_OFFSET 0x000
+#define MDIO_RATE_ADJ_INT_OFFSET 0x004
+#define MDIO_RATE_ADJ_DIVIDENT_SHIFT 16
+
#define MDIO_SCAN_CTRL_OFFSET 0x008
#define MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR 28
@@ -49,21 +53,38 @@
#define MDIO_REG_ADDR_SPACE_SIZE 0x250
+#define MDIO_OPERATING_FREQUENCY 11000000
+#define MDIO_RATE_ADJ_DIVIDENT 1
+
struct iproc_mdiomux_desc {
void *mux_handle;
void __iomem *base;
struct device *dev;
struct mii_bus *mii_bus;
+ struct clk *core_clk;
};
static void mdio_mux_iproc_config(struct iproc_mdiomux_desc *md)
{
+ u32 divisor;
u32 val;
/* Disable external mdio master access */
val = readl(md->base + MDIO_SCAN_CTRL_OFFSET);
val |= BIT(MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR);
writel(val, md->base + MDIO_SCAN_CTRL_OFFSET);
+
+ if (md->core_clk) {
+ /* use rate adjust regs to derrive the mdio's operating
+ * frequency from the specified core clock
+ */
+ divisor = clk_get_rate(md->core_clk) / MDIO_OPERATING_FREQUENCY;
+ divisor = divisor / (MDIO_RATE_ADJ_DIVIDENT + 1);
+ val = divisor;
+ val |= MDIO_RATE_ADJ_DIVIDENT << MDIO_RATE_ADJ_DIVIDENT_SHIFT;
+ writel(val, md->base + MDIO_RATE_ADJ_EXT_OFFSET);
+ writel(val, md->base + MDIO_RATE_ADJ_INT_OFFSET);
+ }
}
static int iproc_mdio_wait_for_idle(void __iomem *base, bool result)
@@ -204,6 +225,19 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ md->core_clk = devm_clk_get(&pdev->dev, NULL);
+ if (md->core_clk == ERR_PTR(-ENOENT) ||
+ md->core_clk == ERR_PTR(-EINVAL))
+ md->core_clk = NULL;
+ else if (IS_ERR(md->core_clk))
+ return PTR_ERR(md->core_clk);
+
+ rc = clk_prepare_enable(md->core_clk);
+ if (rc) {
+ dev_err(&pdev->dev, "failed to enable core clk\n");
+ return rc;
+ }
+
bus = md->mii_bus;
bus->priv = md;
bus->name = "iProc MDIO mux bus";
@@ -217,7 +251,7 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev)
rc = mdiobus_register(bus);
if (rc) {
dev_err(&pdev->dev, "mdiomux registration failed\n");
- return rc;
+ goto out_clk;
}
platform_set_drvdata(pdev, md);
@@ -236,6 +270,8 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev)
out_register:
mdiobus_unregister(bus);
+out_clk:
+ clk_disable_unprepare(md->core_clk);
return rc;
}
@@ -245,6 +281,7 @@ static int mdio_mux_iproc_remove(struct platform_device *pdev)
mdio_mux_uninit(md->mux_handle);
mdiobus_unregister(md->mii_bus);
+ clk_disable_unprepare(md->core_clk);
return 0;
}
--
1.9.1
Add support for suspend and resume to the Broadcom iProc mdio
mux driver.
Signed-off-by: Arun Parameswaran <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
---
drivers/net/phy/mdio-mux-bcm-iproc.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
index c608e3c4..518f4c7 100644
--- a/drivers/net/phy/mdio-mux-bcm-iproc.c
+++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
@@ -286,6 +286,32 @@ static int mdio_mux_iproc_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int mdio_mux_iproc_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(md->core_clk);
+
+ return 0;
+}
+
+static int mdio_mux_iproc_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev);
+
+ clk_prepare_enable(md->core_clk);
+ mdio_mux_iproc_config(md);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mdio_mux_iproc_pm_ops,
+ mdio_mux_iproc_suspend, mdio_mux_iproc_resume);
+
static const struct of_device_id mdio_mux_iproc_match[] = {
{
.compatible = "brcm,mdio-mux-iproc",
@@ -298,6 +324,7 @@ static int mdio_mux_iproc_remove(struct platform_device *pdev)
.driver = {
.name = "mdio-mux-iproc",
.of_match_table = mdio_mux_iproc_match,
+ .pm = &mdio_mux_iproc_pm_ops,
},
.probe = mdio_mux_iproc_probe,
.remove = mdio_mux_iproc_remove,
--
1.9.1
Configure the scan control register in the Broadcom iProc
mdio mux driver to disable access to external master.
In some SoC's, the scan control register defaults to an incorrect
value.
Signed-off-by: Arun Parameswaran <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
---
drivers/net/phy/mdio-mux-bcm-iproc.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c
index 48bb74a..c36ce4b 100644
--- a/drivers/net/phy/mdio-mux-bcm-iproc.c
+++ b/drivers/net/phy/mdio-mux-bcm-iproc.c
@@ -22,6 +22,9 @@
#include <linux/mdio-mux.h>
#include <linux/delay.h>
+#define MDIO_SCAN_CTRL_OFFSET 0x008
+#define MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR 28
+
#define MDIO_PARAM_OFFSET 0x23c
#define MDIO_PARAM_MIIM_CYCLE 29
#define MDIO_PARAM_INTERNAL_SEL 25
@@ -53,6 +56,16 @@ struct iproc_mdiomux_desc {
struct mii_bus *mii_bus;
};
+static void mdio_mux_iproc_config(struct iproc_mdiomux_desc *md)
+{
+ u32 val;
+
+ /* Disable external mdio master access */
+ val = readl(md->base + MDIO_SCAN_CTRL_OFFSET);
+ val |= BIT(MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR);
+ writel(val, md->base + MDIO_SCAN_CTRL_OFFSET);
+}
+
static int iproc_mdio_wait_for_idle(void __iomem *base, bool result)
{
unsigned int timeout = 1000; /* loop for 1s */
@@ -216,6 +229,8 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev)
goto out_register;
}
+ mdio_mux_iproc_config(md);
+
dev_info(md->dev, "iProc mdiomux registered\n");
return 0;
--
1.9.1
On 08/01/2018 05:53 PM, Arun Parameswaran wrote:
> Use devm_mdiobus_alloc() instead of mdiobus_alloc() in the Broadcom
> iProc mdio mux driver.
>
> Signed-off-by: Arun Parameswaran <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
--
Florian
On 08/01/2018 05:53 PM, Arun Parameswaran wrote:
> Add support to configure the internal rate adjust register based on the
> core clock supplied through device tree in the Broadcom iProc mdio mux.
>
> The operating frequency of the mdio mux block is 11MHz. This is derrived
> by dividing the clock to the mdio mux with the rate adjust register.
>
> In some SoC's the default values of the rate adjust register do not yield
> 11MHz. These SoC's are required to specify the clock via the device tree
> for proper operation.
>
> Signed-off-by: Arun Parameswaran <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
--
Florian
On 08/01/2018 05:53 PM, Arun Parameswaran wrote:
> Hi,
> The patchset is based on David Miller's "net-next" repo.
>
> The patchset extends the Broadcom iProc mdio mux to add support for
> suspend/resume and the ability to configure the internal clock
> divider. The patchset also sets the scan control register to
> disable external master access.
>
> The base address of the mdio-mux-bcm-iproc is modified to point to the
> start of the mdio block's address space, to be able to access all the
> mdio's registers. The missing registers are required to configure the
> internal clock divider registers in some of the Broadcom SoC's.
Looks ready to me now, thanks for your persistence addressing feedback.
>
> Changes from v3:
> - Removed 'platform_set_drvdata(pdev, NULL)' call (in patch 5/8)
> - Fixed the return code handling for the devm_clk_get() call (in patch
> 7/8)
> - Added Reviewed-by tag to Patch 8/8
>
> Changes from v2:
> - Addressed Andrew's comments:
> - Moved to using devm_mdiobus_alloc. Added this as a separate patch.
> - Changed to reverse christmas tree order for variable declaration in
> the clock patch
> - Addressed Florian's comments:
> - Removed null checks for the clock before calling unprepare in
> both clock and pm patches.
> - Added check for EPROBE_DEFER when fetching the clock in the clock
> patch.
> - The patch to use the devm API has been added before the clock & pm
> patches. This patch is now patch '5' in the series.
> - Added reviewed-by tags to commit messages of patches which remain
> unmodified from v2.
> - Modified PM patch to use platform_get_drvdata() in suspend/resume
> API's, similar to the recent fix that went in for the remove()
> api.
>
> Changes from v1:
> - Addressed Andrew's comments.
> - Reworked the patches to be based on 'net-next'
> - Removed 'fixes' from the commit messages, the changes are related
> to the new features being added.
> - Maintained backward compatibility to older dt-blob's specifying
> base addresse with an offset. The correction is applied in the
> driver and a message is printed to update the dt-blob.
> - Re-worked and re-ordered the last four patches (4-7).
> - Added setting of the scan control register as a new patch
> - Added a call to 'clk_prepare_enable()' in the patch that adds
> the clock config support, removed the debug message when clock
> is not passed.
> - Simplified the pm support patch (removed the array used for the
> save/restore logic).
>
> Thanks
>
> Arun Parameswaran (8):
> dt-bindings: net: Fix Broadcom iProc mdio mux driver base address
> net: phy: Fix the register offsets in Broadcom iProc mdio mux driver
> arm64: dts: Fix the base address of the Broadcom iProc mdio mux
> net: phy: Disable external master access in bcm mdio mux driver
> net: phy: Use devm api for mdio bus allocation in bcm iproc mdio mux
> dt-bindings: net: Add clock handle to Broadcom iProc mdio mux
> net: phy: Add support to configure clock in Broadcom iProc mdio mux
> net: phy: Add pm support to Broadcom iProc mdio mux driver
>
> .../bindings/net/brcm,mdio-mux-iproc.txt | 7 +-
> arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 4 +-
> .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 4 +-
> drivers/net/phy/mdio-mux-bcm-iproc.c | 108 ++++++++++++++++++---
> 4 files changed, 106 insertions(+), 17 deletions(-)
>
--
Florian
From: Arun Parameswaran <[email protected]>
Date: Wed, 1 Aug 2018 17:53:45 -0700
> The patchset extends the Broadcom iProc mdio mux to add support for
> suspend/resume and the ability to configure the internal clock
> divider. The patchset also sets the scan control register to
> disable external master access.
...
Series applied to net-next, thank you.