Add a USB_QUIRK_DISCONNECT_SUSPEND quirk for the Lenovo TIO built-in
usb-audio.when A630Z going into S3,the system immediately wakeup 7-8
seconds later by usb-audio disconnect interrupt.to avoids the issue.
Seeking a better fix, we've tried a lot of things, including:
- Check that the device's power/wakeup is disabled
- Check that remote wakeup is off at the USB level
- All the quirks in drivers/usb/core/quirks.c e.g. USB_QUIRK_RESET_RESUME,
USB_QUIRK_RESET, USB_QUIRK_IGNORE_REMOTE_WAKEUP, USB_QUIRK_NO_LPM.
but none of that makes any difference.
There are no errors in the logs showing any suspend/resume-related issues.
When the system wakes up due to the modem, log-wise it appears to be a
normal resume.
Introduce a quirk to disable the port during suspend when the modem is
detected.
Signed-off-by: Penghao <[email protected]>
---
drivers/usb/core/quirks.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 7c1198f80c23..d2a9493cc360 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -403,6 +403,10 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x12d1, 0x15c3), .driver_info =
USB_QUIRK_DISCONNECT_SUSPEND },
+ /* Lenovo A630Z TIO build-in usb sound card */
+ { USB_DEVICE9(0x17ef, 0xa012), driver_info =
+ USB_QUIRK_DISCONNECT_SUSPEND },
+
/* SKYMEDI USB_DRIVE */
{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
--
2.11.0
On 9/4/2020 08:45, Penghao wrote:
> --- a/drivers/usb/core/quirks.c
> +++ b/drivers/usb/core/quirks.c
> @@ -403,6 +403,10 @@ static const struct usb_device_id usb_quirk_list[] = {
> { USB_DEVICE(0x12d1, 0x15c3), .driver_info =
> USB_QUIRK_DISCONNECT_SUSPEND },
>
> + /* Lenovo A630Z TIO build-in usb sound card */
> + { USB_DEVICE9(0x17ef, 0xa012), driver_info =
> + USB_QUIRK_DISCONNECT_SUSPEND },
> +
> /* SKYMEDI USB_DRIVE */
> { USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
>
>
This list was sorted in a beautiful ascending order of vid, pid before
you entered your quirk..
rgds
Lars
On Fri, Sep 04, 2020 at 09:45:16AM +0800, Penghao wrote:
> Add a USB_QUIRK_DISCONNECT_SUSPEND quirk for the Lenovo TIO built-in
> usb-audio.when A630Z going into S3,the system immediately wakeup 7-8
> seconds later by usb-audio disconnect interrupt.to avoids the issue.
>
> Seeking a better fix, we've tried a lot of things, including:
> - Check that the device's power/wakeup is disabled
> - Check that remote wakeup is off at the USB level
> - All the quirks in drivers/usb/core/quirks.c e.g. USB_QUIRK_RESET_RESUME,
> USB_QUIRK_RESET, USB_QUIRK_IGNORE_REMOTE_WAKEUP, USB_QUIRK_NO_LPM.
>
> but none of that makes any difference.
>
> There are no errors in the logs showing any suspend/resume-related issues.
> When the system wakes up due to the modem, log-wise it appears to be a
> normal resume.
>
> Introduce a quirk to disable the port during suspend when the modem is
> detected.
>
> Signed-off-by: Penghao <[email protected]>
> ---
> drivers/usb/core/quirks.c | 4 ++++
> 1 file changed, 4 insertions(+)
Odd subject line, this is not ALSA: or the usb-audio driver :(
Please fix up and properly order the entry.
thanks,
greg k-h