strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
---
drivers/scsi/3w-9xxx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 38d20a69ee12..f925f8664c2c 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -617,7 +617,7 @@ static int twa_check_srl(TW_Device_Extension *tw_dev, int *flashed)
}
/* Load rest of compatibility struct */
- strlcpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION,
+ strscpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION,
sizeof(tw_dev->tw_compat_info.driver_version));
tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL;
tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
On Wed, May 17, 2023 at 02:29:55PM +0000, Azeem Shaikh wrote:
> strlcpy() reads the entire source buffer first.
> This read may exceed the destination size limit.
> This is both inefficient and can lead to linear read
> overflows if a source string is not NUL-terminated [1].
> In an effort to remove strlcpy() completely [2], replace
> strlcpy() here with strscpy().
> No return values were used, so direct replacement is safe.
>
> [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
> [2] https://github.com/KSPP/linux/issues/89
>
> Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
--
Kees Cook
On Wed, 17 May 2023 14:29:55 +0000, Azeem Shaikh wrote:
> strlcpy() reads the entire source buffer first.
> This read may exceed the destination size limit.
> This is both inefficient and can lead to linear read
> overflows if a source string is not NUL-terminated [1].
> In an effort to remove strlcpy() completely [2], replace
> strlcpy() here with strscpy().
> No return values were used, so direct replacement is safe.
>
> [...]
Applied to for-next/hardening, thanks!
[1/1] scsi: 3w-9xxx: Replace all non-returning strlcpy with strscpy
https://git.kernel.org/kees/c/fa36c95739ab
--
Kees Cook
Kees,
> On Wed, 17 May 2023 14:29:55 +0000, Azeem Shaikh wrote:
>> strlcpy() reads the entire source buffer first.
>> This read may exceed the destination size limit.
>> This is both inefficient and can lead to linear read
>> overflows if a source string is not NUL-terminated [1].
>> In an effort to remove strlcpy() completely [2], replace
>> strlcpy() here with strscpy().
>> No return values were used, so direct replacement is safe.
>>
>> [...]
>
> Applied to for-next/hardening, thanks!
>
> [1/1] scsi: 3w-9xxx: Replace all non-returning strlcpy with strscpy
> https://git.kernel.org/kees/c/fa36c95739ab
Are you planning on sending these? That's fine with me, just need to
know if I should close them in patchwork...
--
Martin K. Petersen Oracle Linux Engineering
On May 22, 2023 3:41:58 PM PDT, "Martin K. Petersen" <[email protected]> wrote:
>
>Kees,
>
>> On Wed, 17 May 2023 14:29:55 +0000, Azeem Shaikh wrote:
>>> strlcpy() reads the entire source buffer first.
>>> This read may exceed the destination size limit.
>>> This is both inefficient and can lead to linear read
>>> overflows if a source string is not NUL-terminated [1].
>>> In an effort to remove strlcpy() completely [2], replace
>>> strlcpy() here with strscpy().
>>> No return values were used, so direct replacement is safe.
>>>
>>> [...]
>>
>> Applied to for-next/hardening, thanks!
>>
>> [1/1] scsi: 3w-9xxx: Replace all non-returning strlcpy with strscpy
>> https://git.kernel.org/kees/c/fa36c95739ab
>
>Are you planning on sending these? That's fine with me, just need to
>know if I should close them in patchwork...
Yeah, I took a bunch that hadn't been picked up yet:
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/log/?h=for-next/hardening
Thanks!
--
Kees Cook