Hi all,
I am experiencing problems with a system of ours. Namely, it boots
fine with kernels
2.6.18.x and 2.6.32.x, but does not boot with 2.6.35 nor with 2.6.35.3.
With "not boot", I mean that it literally prints nothing after grub
hands over control
even with the "debug" statement enabled. Early printk is useless, as well.
Grub tells me:
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz debug console=tty0 console=ttyS0,115200 ide_core.nodma=0.0
ide_core.nodma=0.1 ide_core.nodma=1.0 root=/dev/ram0 rw init=/linuxrc ? root_d
ev=/dev/hda1 etc_dev=/dev/hda2 root_maxsize=200m varlog_maxsize=10m root_fstype
=ext3 etc_fstype=ext3 do_md5sum=0
[Linux-bzImage, setup=0x2e00, size=0x28f400]
initrd /boot/initrd
[Linux-initrd @ 0x377f0000, 0x800000 bytes]
The initrd is static and merely contains a /linuxrc which untars the
root tarball into
RAM. Starting with a "clean" parameter line yields the same result.
I am attaching the .config for .32 and .35.
Any and all help in tracking this down appreciated. If you need more
information, ask.
Thanks a lot,
Richard
test ~ # lspci
0000:00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM
Controller (rev 02)
0000:00:01.0 PCI bridge: Intel Corporation 82Q35 Express PCI Express
Root Port (rev 02)
0000:00:02.0 VGA compatible controller: Intel Corporation 82Q35
Express Integrated Graphics Controller (rev 02)
0000:00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 1 (rev 02)
0000:00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 2 (rev 02)
0000:00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 3 (rev 02)
0000:00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 4 (rev 02)
0000:00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 5 (rev 02)
0000:00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 6 (rev 02)
0000:00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #3 (rev 02)
0000:00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #1 (rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
0000:00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC
Interface Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH
(ICH9R/DO/DH) 4 port SATA IDE Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus
Controller (rev 02)
0000:00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2
port SATA IDE Controller (rev 02)
0000:01:00.0 PCI bridge: PLX Technology, Inc. PEX 8518 16-lane, 5-port
PCI Express Switch (rev ac)
0000:02:01.0 PCI bridge: PLX Technology, Inc. PEX 8518 16-lane, 5-port
PCI Express Switch (rev ac)
0000:02:02.0 PCI bridge: PLX Technology, Inc. PEX 8518 16-lane, 5-port
PCI Express Switch (rev ac)
0000:02:03.0 PCI bridge: PLX Technology, Inc. PEX 8518 16-lane, 5-port
PCI Express Switch (rev ac)
0000:03:00.0 Ethernet controller: Intel Corporation 82575EB Gigabit
Backplane Connection (rev 02)
0000:03:00.1 Ethernet controller: Intel Corporation 82575EB Gigabit
Backplane Connection (rev 02)
0000:04:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
Network Connection
0000:05:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
Network Connection
0000:06:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
Network Connection
0000:07:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
Network Connection
0000:08:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
Network Connection
0000:09:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
Network Connection
0000:0a:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
Network Connection
0000:0b:00.0 Ethernet controller: Intel Corporation 82574L Gigabit
Network Connection
test ~ # cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping : 10
cpu MHz : 3000.577
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm pni
monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 6010.26
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
stepping : 10
cpu MHz : 3000.577
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm pni
monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 6000.51
test ~ #
As a follow-up, we restarted with a minimal confugiration from scratch and
it boots. Please disregard the lacking root filesystem, that is of no concern
to us atm. Note that there is one special char in the paste below. No idea
where that is coming from.
I will try to hunt down the option(s) that caused this, but if anyone has any
suggestions...
Thanks,
Richard
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz console=tty0 console=ttyS0,115200 ide_core.nodma=0.0 ide_c
ore.nodma=0.1 ide_core.nodma=1.0 root=/dev/ram0 rw init=/linuxrc ? root_dev=/de
v/hda1 etc_dev=/dev/hda2 root_maxsize=200m varlog_maxsize=10m root_fstype=ext3
etc_fstype=ext3 do_md5sum=0
[Linux-bzImage, setup=0x2e00, size=0x3c4a00]
initrd /boot/initrd
[Linux-initrd @ 0x377f0000, 0x800000 bytes]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.3from_scratch (root@vpn-dev) (gcc
version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP PREEMPT Tue Aug
24 12:03:08 CEST 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f590000 (usable)
[ 0.000000] BIOS-e820: 000000003f590000 - 000000003f5e0000 (reserved)
[ 0.000000] BIOS-e820: 000000003f5e0000 - 000000003f5e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f5e3000 - 000000003f5f0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f5f0000 - 000000003f600000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be
enabled: non-PAE kernel!
[ 0.000000] DMI 2.5 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM,
working around it.
[ 0.000000] last_pfn = 0x3f590 max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f400 (usable)
[ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003f590000 (usable)
[ 0.000000] modified: 000000003f590000 - 000000003f5e0000 (reserved)
[ 0.000000] modified: 000000003f5e0000 - 000000003f5e3000 (ACPI NVS)
[ 0.000000] modified: 000000003f5e3000 - 000000003f5f0000 (ACPI data)
[ 0.000000] modified: 000000003f5f0000 - 000000003f600000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] found SMP MP-table at [c00f36a0] f36a0
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] RAMDISK: 377f0000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 00100000 - 00900000
[ 0.000000] Move RAMDISK from 00000000377f0000 - 0000000037feffff
to 00100000 - 008fffff
[ 0.000000] ACPI: RSDP 000f7260 00014 (v00 IntelR)
[ 0.000000] ACPI: RSDT 3f5e3000 00038 (v01 IntelR AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: FACP 3f5e3080 00074 (v01 IntelR AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: DSDT 3f5e3100 045D2 (v01 INTELR AWRDACPI 00001000
MSFT 03000000)
[ 0.000000] ACPI: FACS 3f5e0000 00040
[ 0.000000] ACPI: HPET 3f5e7800 00038 (v01 IntelR AWRDACPI 42302E31
AWRD 00000098)
[ 0.000000] ACPI: MCFG 3f5e7840 0003C (v01 IntelR AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: APIC 3f5e7700 00084 (v01 IntelR AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: SSDT 3f5e7ee0 00590 (v01 PmRef CpuPm 00003000
INTL 20041203)
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00016000 - 0001cf00
[ 0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #1 [0001000000 - 00017a4ef4] TEXT DATA BSS ==>
[0001000000 - 00017a4ef4]
[ 0.000000] #2 [00017a5000 - 00017ac06e] BRK ==>
[00017a5000 - 00017ac06e]
[ 0.000000] #3 [00000f36b0 - 0000100000] BIOS reserved ==>
[00000f36b0 - 0000100000]
[ 0.000000] #4 [00000f36a0 - 00000f36b0] MP-table mpf ==>
[00000f36a0 - 00000f36b0]
[ 0.000000] #5 [000009f000 - 00000f1d24] BIOS reserved ==>
[000009f000 - 00000f1d24]
[ 0.000000] #6 [00000f1f20 - 00000f36a0] BIOS reserved ==>
[00000f1f20 - 00000f36a0]
[ 0.000000] #7 [00000f1d24 - 00000f1f20] MP-table mpc ==>
[00000f1d24 - 00000f1f20]
[ 0.000000] #8 [0000010000 - 0000011000] TRAMPOLINE ==>
[0000010000 - 0000011000]
[ 0.000000] #9 [0000011000 - 0000015000] ACPI WAKEUP ==>
[0000011000 - 0000015000]
[ 0.000000] #10 [0000015000 - 0000016000] PGTABLE ==>
[0000015000 - 0000016000]
[ 0.000000] #11 [0000100000 - 0000900000] NEW RAMDISK ==>
[0000100000 - 0000900000]
[ 0.000000] #12 [0000016000 - 000001d000] BOOTMAP ==>
[0000016000 - 000001d000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f590
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f590
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f600000 (gap:
3f600000:a0a00000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34112 r0 d23232 u1048576
[ 0.000000] pcpu-alloc: s34112 r0 d23232 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 257331
[ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200
ide_core.nodma=0.0 ide_core.nodma=0.1 ide_core.nodma=1.0
root=/dev/ram0 rw init=/linuxrc ? root_dev=/dev/hda1 etc_dev=/dev/hda2
root_maxsize=200m varlog_maxsize=10m root_fstype=ext3 etc_fstype=ext3
do_md5sum=0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f590)
[ 0.000000] Memory: 1012188k/1037888k available (4277k kernel code,
25248k reserved, 2458k data, 388k init, 128584k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1695000 - 0xc16f6000 ( 388 kB)
[ 0.000000] .data : 0xc142d63b - 0xc16941e4 (2458 kB)
[ 0.000000] .text : 0xc1000000 - 0xc142d63b (4277 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3000.448 MHz processor.
[ 0.002003] Calibrating delay loop (skipped), value calculated
using timer frequency.. 6000.89 BogoMIPS (lpj=3000448)
[ 0.004002] pid_max: default: 32768 minimum: 301
[ 0.005014] Security Framework initialized
[ 0.006003] SELinux: Initializing.
[ 0.007012] Mount-cache hash table entries: 512
[ 0.008088] Initializing cgroup subsys ns
[ 0.009003] Initializing cgroup subsys cpuacct
[ 0.010004] Initializing cgroup subsys freezer
[ 0.011017] CPU: Physical Processor ID: 0
[ 0.012002] CPU: Processor Core ID: 0
[ 0.013003] mce: CPU supports 6 MCE banks
[ 0.014006] CPU0: Thermal monitoring enabled (TM2)
[ 0.015003] using mwait in idle threads.
[ 0.016004] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.020004] ... version: 2
[ 0.021002] ... bit width: 40
[ 0.022002] ... generic registers: 2
[ 0.023002] ... value mask: 000000ffffffffff
[ 0.024002] ... max period: 000000007fffffff
[ 0.025001] ... fixed-purpose events: 3
[ 0.026002] ... event mask: 0000000700000003
[ 0.027357] ACPI: Core revision 20100428
[ 0.033040] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.034357] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.045826] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
[ 0.051018] Booting Node 0, Processors #1
[ 0.002999] Initializing CPU#1
[ 0.125010] Brought up 2 CPUs
[ 0.126001] Total of 2 processors activated (12000.83 BogoMIPS).
[ 0.128047] khelper used greatest stack depth: 7232 bytes left
[ 0.128312] khelper used greatest stack depth: 7184 bytes left
[ 0.135053] Time: 11:17:18 Date: 08/24/10
[ 0.139030] NET: Registered protocol family 16
[ 0.144031] ACPI: bus type pci registered
[ 0.148032] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.157013] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.164001] PCI: Using MMCONFIG for extended config space
[ 0.170001] PCI: Using configuration type 1 for base access
[ 0.178023] bio: create slab <bio-0> at 0
[ 0.187836] ACPI: SSDT 3f5e78c0 0022A (v01 PmRef Cpu0Ist 00003000
INTL 20041203)
[ 0.189474] ACPI: Dynamic OEM Table Load:
[ 0.192001] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000
INTL 20041203)
[ 0.194580] ACPI: SSDT 3f5e7d80 00152 (v01 PmRef Cpu1Ist 00003000
INTL 20041203)
[ 0.196466] ACPI: Dynamic OEM Table Load:
[ 0.199001] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000
INTL 20041203)
[ 0.201303] ACPI: Interpreter enabled
[ 0.202002] ACPI: (supports S0 S1 S4 S5)
[ 0.204657] ACPI: Using IOAPIC for interrupt routing
[ 0.210116] ACPI: No dock devices found.
[ 0.211026] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.212085] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.213144] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.215015] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.216010] pci_root PNP0A08:00: host bridge window [mem
0xfed40000-0xfed44fff]
[ 0.217001] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.218002] pci_root PNP0A08:00: host bridge window [mem
0x000c0000-0x000dffff]
[ 0.219001] pci_root PNP0A08:00: host bridge window [mem
0x3f650000-0xfebfffff]
[ 0.221437] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by
ICH6 ACPI/GPIO/TCO
[ 0.222003] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.223002] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
4700 (mask 000f)
[ 0.224002] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at
0280 (mask 003f)
[ 0.225330] pci 0000:00:01.0: PCI bridge to [bus 01-05]
[ 0.227005] pci 0000:01:00.0: PCI bridge to [bus 02-05]
[ 0.228292] pci 0000:02:01.0: PCI bridge to [bus 03-03]
[ 0.230120] pci 0000:02:02.0: PCI bridge to [bus 04-04]
[ 0.231226] pci 0000:02:03.0: PCI bridge to [bus 05-05]
[ 0.233229] pci 0000:00:1c.0: PCI bridge to [bus 06-06]
[ 0.234257] pci 0000:00:1c.1: PCI bridge to [bus 07-07]
[ 0.235256] pci 0000:00:1c.2: PCI bridge to [bus 08-08]
[ 0.236257] pci 0000:00:1c.3: PCI bridge to [bus 09-09]
[ 0.237257] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
[ 0.239025] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
[ 0.240072] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c] (subtractive decode)
[ 0.253065] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12)
[ 0.256770] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12)
[ 0.259468] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12)
[ 0.262460] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12)
[ 0.265338] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12)
*0, disabled.
[ 0.269345] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12)
[ 0.272461] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 10 11 12)
*0, disabled.
[ 0.276340] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *10 11 12)
[ 0.279432] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.280017] vgaarb: loaded
[ 0.281053] SCSI subsystem initialized
[ 0.282024] usbcore: registered new interface driver usbfs
[ 0.288016] usbcore: registered new interface driver hub
[ 0.293011] usbcore: registered new device driver usb
[ 0.294020] PCI: Using ACPI for IRQ routing
[ 0.299153] NetLabel: Initializing
[ 0.302007] NetLabel: domain hash size = 128
[ 0.307001] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.312008] NetLabel: unlabeled traffic allowed by default
[ 0.318005] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.325005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.330568] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.339026] Switching to clocksource tsc
[ 0.342927] pnp: PnP ACPI init
[ 1.068496] ACPI: bus type pnp registered
[ 1.072901] pnp 00:01: disabling [io 0x0010-0x001f] because it
overlaps 0000:06:00.0 BAR 2 [io 0x0000-0x001f]
[ 1.084894] pnp: PnP ACPI: found 13 devices
[ 1.089165] ACPI: ACPI bus type pnp unregistered
[ 1.093866] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.099869] system 00:01: [io 0x0880-0x088f] has been reserved
[ 1.105867] system 00:09: [io 0x0400-0x04bf] could not be reserved
[ 1.112217] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.118907] system 00:0c: [mem 0x000f0000-0x000fffff] could not be reserved
[ 1.125943] system 00:0c: [mem 0x3f600000-0x3f6fffff] could not be reserved
[ 1.132980] system 00:0c: [mem 0xfed00000-0xfed000ff] has been reserved
[ 1.139669] system 00:0c: [mem 0x3f5e0000-0x3f5fffff] could not be reserved
[ 1.146705] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.153740] system 00:0c: [mem 0x00100000-0x3f5dffff] could not be reserved
[ 1.160779] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.167822] system 00:0c: [mem 0xfed13000-0xfed1ffff] has been reserved
[ 1.174512] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.181200] system 00:0c: [mem 0xfed45000-0xfed9ffff] has been reserved
[ 1.187891] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.194581] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 1.201269] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 1.207958] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
[ 1.249581] pci 0000:03:00.0: BAR 6: assigned [mem
0xfcb00000-0xfcb1ffff pref]
[ 1.256936] pci 0000:03:00.1: BAR 6: assigned [mem
0xfcb20000-0xfcb3ffff pref]
[ 1.264285] pci 0000:02:01.0: PCI bridge to [bus 03-03]
[ 1.269586] pci 0000:02:01.0: bridge window [io 0xb000-0xbfff]
[ 1.275760] pci 0000:02:01.0: bridge window [mem 0xfd100000-0xfd1fffff]
[ 1.282632] pci 0000:02:01.0: bridge window [mem
0xfcb00000-0xfcbfffff 64bit pref]
[ 1.290512] pci 0000:02:02.0: PCI bridge to [bus 04-04]
[ 1.295816] pci 0000:02:02.0: bridge window [io 0xa000-0xafff]
[ 1.301989] pci 0000:02:02.0: bridge window [mem 0xfd000000-0xfd0fffff]
[ 1.308854] pci 0000:02:02.0: bridge window [mem
0xfca00000-0xfcafffff 64bit pref]
[ 1.316734] pci 0000:02:03.0: PCI bridge to [bus 05-05]
[ 1.322037] pci 0000:02:03.0: bridge window [io 0x9000-0x9fff]
[ 1.328210] pci 0000:02:03.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 1.335072] pci 0000:02:03.0: bridge window [mem
0xfc900000-0xfc9fffff 64bit pref]
[ 1.342945] pci 0000:01:00.0: PCI bridge to [bus 02-05]
[ 1.348251] pci 0000:01:00.0: bridge window [io 0x9000-0xbfff]
[ 1.354423] pci 0000:01:00.0: bridge window [mem 0xfcf00000-0xfd1fffff]
[ 1.361286] pci 0000:01:00.0: bridge window [mem
0xfc900000-0xfcbfffff 64bit pref]
[ 1.369479] pci 0000:00:01.0: PCI bridge to [bus 01-05]
[ 1.374783] pci 0000:00:01.0: bridge window [io 0x9000-0xbfff]
[ 1.380955] pci 0000:00:01.0: bridge window [mem 0xfcf00000-0xfd2fffff]
[ 1.387818] pci 0000:00:01.0: bridge window [mem
0xfc900000-0xfcbfffff 64bit pref]
[ 1.395689] pci 0000:06:00.0: BAR 0: assigned [mem 0xfde00000-0xfde1ffff]
[ 1.402563] pci 0000:06:00.0: BAR 0: set to [mem
0xfde00000-0xfde1ffff] (PCI address [0xfde00000-0xfde1ffff]
[ 1.412521] pci 0000:06:00.0: BAR 3: assigned [mem 0xfde20000-0xfde23fff]
[ 1.419393] pci 0000:06:00.0: BAR 3: set to [mem
0xfde20000-0xfde23fff] (PCI address [0xfde20000-0xfde23fff]
[ 1.429348] pci 0000:06:00.0: BAR 2: assigned [io 0x8000-0x801f]
[ 1.435524] pci 0000:06:00.0: BAR 2: set to [io 0x8000-0x801f]
(PCI address [0x8000-0x801f]
[ 1.444093] pci 0000:00:1c.0: PCI bridge to [bus 06-06]
[ 1.449401] pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
[ 1.455573] pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 1.462437] pci 0000:00:1c.0: bridge window [mem
0xfdd00000-0xfddfffff 64bit pref]
[ 1.470310] pci 0000:00:1c.1: PCI bridge to [bus 07-07]
[ 1.475613] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff]
[ 1.481787] pci 0000:00:1c.1: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 1.488650] pci 0000:00:1c.1: bridge window [mem
0xfdb00000-0xfdbfffff 64bit pref]
[ 1.496522] pci 0000:00:1c.2: PCI bridge to [bus 08-08]
[ 1.501826] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 1.508000] pci 0000:00:1c.2: bridge window [mem 0xfda00000-0xfdafffff]
[ 1.514862] pci 0000:00:1c.2: bridge window [mem
0xfd900000-0xfd9fffff 64bit pref]
[ 1.522734] pci 0000:00:1c.3: PCI bridge to [bus 09-09]
[ 1.528041] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 1.534213] pci 0000:00:1c.3: bridge window [mem 0xfd800000-0xfd8fffff]
[ 1.541077] pci 0000:00:1c.3: bridge window [mem
0xfd700000-0xfd7fffff 64bit pref]
[ 1.548955] pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
[ 1.554261] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.560435] pci 0000:00:1c.4: bridge window [mem 0xfd600000-0xfd6fffff]
[ 1.567307] pci 0000:00:1c.4: bridge window [mem
0xfd500000-0xfd5fffff 64bit pref]
[ 1.575188] pci 0000:00:1c.5: PCI bridge to [bus 0b-0b]
[ 1.580492] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 1.586664] pci 0000:00:1c.5: bridge window [mem 0xfd400000-0xfd4fffff]
[ 1.593527] pci 0000:00:1c.5: bridge window [mem
0xfd300000-0xfd3fffff 64bit pref]
[ 1.601399] pci 0000:00:1e.0: PCI bridge to [bus 0c-0c]
[ 1.606701] pci 0000:00:1e.0: bridge window [io 0x6000-0x6fff]
[ 1.612877] pci 0000:00:1e.0: bridge window [mem 0xfce00000-0xfcefffff]
[ 1.619740] pci 0000:00:1e.0: bridge window [mem
0xfcd00000-0xfcdfffff 64bit pref]
[ 1.627625] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.634409] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.641198] pci 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.647991] pci 0000:02:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.654785] pci 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.661576] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.668360] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.675146] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.681932] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.688724] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.695510] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.702408] NET: Registered protocol family 2
[ 1.706878] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.714228] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 1.722087] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.728967] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.735662] TCP reno registered
[ 1.738882] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.744887] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.751427] RPC: Registered udp transport module.
[ 1.756216] RPC: Registered tcp transport module.
[ 1.760999] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.767620] pci 0000:03:00.0: Disabling L0s
[ 1.771882] pci 0000:03:00.1: Disabling L0s
[ 1.776209] Trying to unpack rootfs image as initramfs...
[ 1.781726] rootfs image is not initramfs (junk in compressed
archive); looks like an initrd
[ 1.799917] Freeing initrd memory: 8192k freed
[ 1.808487] microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
[ 1.814507] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
[ 1.820538] microcode: Microcode Update Driver: v2.00
<[email protected]>, Peter Oruba
[ 1.829477] Scanning for low memory corruption every 60 seconds
[ 1.835724] audit: initializing netlink socket (disabled)
[ 1.841220] type=2000 audit(1282648638.840:1): initialized
[ 1.855522] highmem bounce pool size: 64 pages
[ 1.860054] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.868521] VFS: Disk quotas dquot_6.5.2
[ 1.872622] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.879872] SGI XFS with security attributes, large block/inode
numbers, no debug enabled
[ 1.888629] msgmni has been set to 1741
[ 1.892770] cryptomgr_test used greatest stack depth: 7168 bytes left
[ 1.899300] cryptomgr_test used greatest stack depth: 6876 bytes left
[ 1.905939] alg: No test for stdrng (krng)
[ 1.910148] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 1.917685] io scheduler noop registered
[ 1.921691] io scheduler deadline registered
[ 1.926048] io scheduler cfq registered (default)
[ 1.932917] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.941411] ACPI: Power Button [PWRB]
[ 1.945209] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.952755] ACPI: Power Button [PWRF]
[ 1.956567] ACPI: Fan [FAN] (on)
[ 1.961796] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.967539] ACPI: Thermal Zone [THRM] (40 C)
[ 1.974064] Non-volatile memory driver v1.3
[ 1.978348] Linux agpgart interface v0.103
[ 1.982652] agpgart-intel 0000:00:00.0: Intel Q35 Chipset
[ 1.990216] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[ 2.004126] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.011085] [drm] Initialized drm 1.1.0 20060810
[ 2.015833] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.034603] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.041877] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
�[ 2.292134] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.542133] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.548534] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.554344] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.561413] brd: module loaded
[ 2.564652] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.571892] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.577396] scsi0 : ata_piix
[ 2.580455] scsi1 : ata_piix
[ 2.583914] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
[ 2.590964] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
[ 2.598026] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.605249] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.610741] scsi2 : ata_piix
[ 2.613778] scsi3 : ata_piix
[ 2.617173] ata3: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf100 irq 19
[ 2.624390] ata4: SATA max UDMA/133 cmd 0xf300 ctl 0xf200 bmdma 0xf108 irq 19
[ 2.631952] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
[ 2.639087] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.644944] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4
[ 2.650958] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 2.657065] e1000e 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.664769] e1000e 0000:04:00.0: Disabling ASPM L0s
[ 2.757327] e1000e 0000:04:00.0: eth0: (PCI Express:2.5GB/s:Width
x1) 00:02:b6:41:7e:a6
[ 2.765461] e1000e 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.772569] e1000e 0000:04:00.0: eth0: MAC: 3, PHY: 8, PBA No: ffffff-0ff
[ 2.779449] e1000e 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.787145] e1000e 0000:05:00.0: Disabling ASPM L0s
[ 2.880328] e1000e 0000:05:00.0: eth1: (PCI Express:2.5GB/s:Width
x1) 00:02:b6:41:7e:a7
[ 2.888467] e1000e 0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 2.895573] e1000e 0000:05:00.0: eth1: MAC: 3, PHY: 8, PBA No: ffffff-0ff
[ 2.902453] e1000e 0000:06:00.0: enabling device (0000 -> 0002)
[ 2.908455] e1000e 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.916191] e1000e 0000:06:00.0: Disabling ASPM L0s
[ 2.957798] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.963308] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.012553] e1000e 0000:06:00.0: eth2: (PCI Express:2.5GB/s:Width
x1) 00:02:b6:41:a3:d8
[ 3.020689] e1000e 0000:06:00.0: eth2: Intel(R) PRO/1000 Network Connection
[ 3.027805] e1000e 0000:06:00.0: eth2: MAC: 3, PHY: 8, PBA No: ffffff-0ff
[ 3.034687] e1000e 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.042419] e1000e 0000:07:00.0: Disabling ASPM L0s
[ 3.135558] e1000e 0000:07:00.0: eth3: (PCI Express:2.5GB/s:Width
x1) 00:02:b6:41:a3:d9
[ 3.143696] e1000e 0000:07:00.0: eth3: Intel(R) PRO/1000 Network Connection
[ 3.150809] e1000e 0000:07:00.0: eth3: MAC: 3, PHY: 8, PBA No: ffffff-0ff
[ 3.157694] e1000e 0000:08:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.165105] e1000e 0000:08:00.0: Disabling ASPM L0s
[ 3.219087] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 3.224846] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 3.230147] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 3.230172] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 3.271778] e1000e 0000:08:00.0: eth4: (PCI Express:2.5GB/s:Width
x1) 00:02:b6:41:a3:da
[ 3.279916] e1000e 0000:08:00.0: eth4: Intel(R) PRO/1000 Network Connection
[ 3.287029] e1000e 0000:08:00.0: eth4: MAC: 3, PHY: 8, PBA No: ffffff-0ff
[ 3.293914] e1000e 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.301328] e1000e 0000:09:00.0: Disabling ASPM L0s
[ 3.389785] e1000e 0000:09:00.0: eth5: (PCI Express:2.5GB/s:Width
x1) 00:02:b6:41:a3:db
[ 3.397921] e1000e 0000:09:00.0: eth5: Intel(R) PRO/1000 Network Connection
[ 3.405032] e1000e 0000:09:00.0: eth5: MAC: 3, PHY: 8, PBA No: ffffff-0ff
[ 3.411919] e1000e 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.419650] e1000e 0000:0a:00.0: Disabling ASPM L0s
[ 3.512585] e1000e 0000:0a:00.0: eth6: (PCI Express:2.5GB/s:Width
x1) 00:02:b6:41:a3:dc
[ 3.520717] e1000e 0000:0a:00.0: eth6: Intel(R) PRO/1000 Network Connection
[ 3.527830] e1000e 0000:0a:00.0: eth6: MAC: 3, PHY: 8, PBA No: ffffff-0ff
[ 3.534714] e1000e 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.542130] e1000e 0000:0b:00.0: Disabling ASPM L0s
[ 3.630797] e1000e 0000:0b:00.0: eth7: (PCI Express:2.5GB/s:Width
x1) 00:02:b6:41:a3:dd
[ 3.638930] e1000e 0000:0b:00.0: eth7: Intel(R) PRO/1000 Network Connection
[ 3.646043] e1000e 0000:0b:00.0: eth7: MAC: 3, PHY: 8, PBA No: ffffff-0ff
[ 3.652966] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 3.659144] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.664791] sky2: driver version 1.28
[ 3.668708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.675337] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.682559] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.687919] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 3.695475] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.703970] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 3.720004] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.725853] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.732721] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.740070] usb usb1: Product: EHCI Host Controller
[ 3.745022] usb usb1: Manufacturer: Linux 2.6.35.3from_scratch ehci_hcd
[ 3.751716] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.756502] hub 1-0:1.0: USB hub found
[ 3.760335] hub 1-0:1.0: 6 ports detected
[ 3.764510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.770807] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.777260] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.784478] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.789818] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 3.797347] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.802320] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[ 3.808170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.815037] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.822391] usb usb2: Product: UHCI Host Controller
[ 3.827343] usb usb2: Manufacturer: Linux 2.6.35.3from_scratch uhci_hcd
[ 3.834036] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.838822] hub 2-0:1.0: USB hub found
[ 3.842653] hub 2-0:1.0: 2 ports detected
[ 3.846800] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.854018] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.859357] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 3.866887] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.871859] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[ 3.877707] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.884573] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.891921] usb usb3: Product: UHCI Host Controller
[ 3.896873] usb usb3: Manufacturer: Linux 2.6.35.3from_scratch uhci_hcd
[ 3.903566] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.908359] hub 3-0:1.0: USB hub found
[ 3.912187] hub 3-0:1.0: 2 ports detected
[ 3.916335] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.923557] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.928900] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 3.936433] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.941415] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[ 3.947268] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.954139] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.961486] usb usb4: Product: UHCI Host Controller
[ 3.966442] usb usb4: Manufacturer: Linux 2.6.35.3from_scratch uhci_hcd
[ 3.973134] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.977913] hub 4-0:1.0: USB hub found
[ 3.983276] hub 4-0:1.0: 2 ports detected
[ 3.987466] Initializing USB Mass Storage driver...
[ 3.992458] usbcore: registered new interface driver usb-storage
[ 3.998542] USB Mass Storage support registered.
[ 4.003274] usbcore: registered new interface driver libusual
[ 4.009213] PNP: No PS/2 controller found. Probing ports directly.
[ 4.048550] Failed to disable AUX port, but continuing anyway... Is
this a SiS?
[ 4.055992] If AUX port is really absent please use the 'i8042.noaux' option.
[ 4.110011] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 4.234560] usb 1-5: New USB device found, idVendor=05e3, idProduct=0716
[ 4.241349] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 4.248566] usb 1-5: Product: USB Storage
[ 4.252658] usb 1-5: SerialNumber: 000000009715
[ 4.257902] scsi4 : usb-storage 1-5:1.0
[ 4.313092] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.318192] mice: PS/2 mouse device common for all mice
[ 4.323605] rtc_cmos 00:04: RTC can wake from S4
[ 4.328338] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.334543] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.341034] cpuidle: using governor ladder
[ 4.345213] cpuidle: using governor menu
[ 4.349593] usbcore: registered new interface driver hiddev
[ 4.355284] usbcore: registered new interface driver usbhid
[ 4.360933] usbhid: USB HID core driver
[ 4.364858] Netfilter messages via NETLINK v0.30.
[ 4.369922] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.375316] TCP cubic registered
[ 4.378946] Using IPI No-Shortcut mode
[ 4.382875] registered taskstats version 1
[ 4.387603] Magic number: 6:700:277
[ 4.391350] tty tty14: hash matches
[ 4.395073] RAMDISK: ext2 filesystem found at block 0
[ 4.400488] RAMDISK: Loading 8192KiB [1 disk] into ram disk... done.
[ 4.544485] ufs was compiled with read-only support, can't be
mounted as read-write
[ 4.552713] UDF-fs: No partition found (1)
[ 4.557200] List of all partitions:
[ 4.560959] No filesystem could mount root, tried: ext3 vfat msdos
iso9660 ufs udf xfs
[ 4.569812] Kernel panic - not syncing: VFS: Unable to mount root
fs on unknown-block(1,0)
[ 4.578730] Pid: 1, comm: swapper Not tainted 2.6.35.3from_scratch #1
[ 4.585709] Call Trace:
[ 4.588355] [<c14264b0>] ? printk+0xf/0x11
[ 4.592890] [<c1426435>] panic+0x55/0xc1
[ 4.597135] [<c1695ca1>] mount_block_root+0x163/0x172
[ 4.602595] [<c1002930>] ? sysenter_past_esp+0x4d/0x57
[ 4.608253] [<c1695d16>] mount_root+0x66/0x84
[ 4.613068] [<c1695e74>] prepare_namespace+0x140/0x167
[ 4.618740] [<c16953f1>] kernel_init+0x1ae/0x1bd
[ 4.623875] [<c1695243>] ? kernel_init+0x0/0x1bd
[ 4.628987] [<c1002eb6>] kernel_thread_helper+0x6/0x10
On Tue, 24 Aug 2010 15:58:38 +0200 Richard Hartmann wrote:
> As a follow-up, we restarted with a minimal confugiration from scratch and
> it boots. Please disregard the lacking root filesystem, that is of no concern
> to us atm. Note that there is one special char in the paste below. No idea
> where that is coming from.
>
> I will try to hunt down the option(s) that caused this, but if anyone has any
> suggestions...
I would try enabling CONFIG_DEVTMPFS and CONFIG_DEVTMPFS_MOUNT.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
On Tue, Aug 24, 2010 at 19:40, Randy Dunlap <[email protected]> wrote:
> I would try enabling CONFIG_DEVTMPFS and CONFIG_DEVTMPFS_MOUNT.
As neiter the working nor the broken config has this option enabled, I
don't know
how this will help with finding the combinations of config options that made the
kernel fail to boot. Unless I am missing something?
Thanks,
Richard
On 08/25/10 04:52, Richard Hartmann wrote:
> On Tue, Aug 24, 2010 at 19:40, Randy Dunlap <[email protected]> wrote:
>
>> I would try enabling CONFIG_DEVTMPFS and CONFIG_DEVTMPFS_MOUNT.
>
> As neiter the working nor the broken config has this option enabled, I
> don't know
> how this will help with finding the combinations of config options that made the
> kernel fail to boot. Unless I am missing something?
Is the "working" one the one that didn't find a root fs?
This could help with that, but I guess you said that wasn't a concern.
good luck on it.
--
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***