The OCFS2 developers have already done all of the hard work to allow
volumes larger than 16 TiB. But there is still a "sanity check" in
fs/ocfs2/super.c that prevents the mounting of such volumes, even when
the cluster size and journal options would allow it.
This patch replaces that sanity check with a more sophisticated one to
mount a huge volume provided that (a) it is addressable by the raw
word/address size of the system (borrowing a test from ext4); (b) the
volume is using JBD2; and (c) the JBD2_FEATURE_INCOMPAT_64BIT flag is
set on the journal.
I factored out the sanity check into its own function. I also moved it
from ocfs2_initialize_super() down to ocfs2_check_volume(); any earlier,
and the journal's flags have not been read from disk yet.
I have tested this patch on small volumes, huge volumes, and huge
volumes without 64-bit block support in the journal. All of them appear
to work or to fail gracefully, as appropriate.
Signed-off-by: Patrick LoPresti <[email protected]>
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 0eaa929..3db233d 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1991,6 +1991,47 @@ static int ocfs2_setup_osb_uuid(struct ocfs2_super *osb, const unsigned char *uu
return 0;
}
+/* Check to make sure entire volume is addressable on this system.
+ Requires osb_clusters_at_boot to be valid and for the journal to
+ have been read by jbd2_journal_load(). */
+static int ocfs2_check_addressable(struct ocfs2_super *osb)
+{
+ int status = 0;
+ u64 max_block =
+ ocfs2_clusters_to_blocks(osb->sb,
+ osb->osb_clusters_at_boot) - 1;
+
+ /* Absolute addressability check (borrowed from ext4/super.c) */
+ if ((max_block >
+ (sector_t)(~0LL) >> (osb->sb->s_blocksize_bits - 9)) ||
+ (max_block > (pgoff_t)(~0LL) >> (PAGE_CACHE_SHIFT -
+ osb->sb->s_blocksize_bits))) {
+ mlog(ML_ERROR, "Volume too large "
+ "to mount safely on this system");
+ status = -EFBIG;
+ goto out;
+ }
+
+ /* 32-bit block number is always OK. */
+ if (max_block <= (u32)~0UL)
+ goto out;
+
+ /* Volume is "huge", so see if our journal is new enough to
+ support it. */
+ if (!(OCFS2_HAS_COMPAT_FEATURE(osb->sb,
+ OCFS2_FEATURE_COMPAT_JBD2_SB) &&
+ jbd2_journal_check_used_features(osb->journal->j_journal, 0, 0,
+ JBD2_FEATURE_INCOMPAT_64BIT))) {
+ mlog(ML_ERROR, "The journal cannot address the entire volume. "
+ "Enable the 'block64' journal option with tunefs.ocfs2");
+ status = -EFBIG;
+ goto out;
+ }
+
+ out:
+ return status;
+}
+
static int ocfs2_initialize_super(struct super_block *sb,
struct buffer_head *bh,
int sector_size,
@@ -2215,14 +2256,6 @@ static int ocfs2_initialize_super(struct super_block *sb,
goto bail;
}
- if (ocfs2_clusters_to_blocks(osb->sb, le32_to_cpu(di->i_clusters) - 1)
- > (u32)~0UL) {
- mlog(ML_ERROR, "Volume might try to write to blocks beyond "
- "what jbd can address in 32 bits.\n");
- status = -EINVAL;
- goto bail;
- }
-
if (ocfs2_setup_osb_uuid(osb, di->id2.i_super.s_uuid,
sizeof(di->id2.i_super.s_uuid))) {
mlog(ML_ERROR, "Out of memory trying to setup our uuid.\n");
@@ -2404,6 +2437,12 @@ static int ocfs2_check_volume(struct ocfs2_super *osb)
goto finally;
}
+ /* Now that journal has been loaded, check to make sure entire
+ volume is addressable. */
+ status = ocfs2_check_addressable(osb);
+ if (status)
+ goto finally;
+
if (dirty) {
/* recover my local alloc if we didn't unmount cleanly. */
status = ocfs2_begin_local_alloc_recovery(osb,
[Added jbd2 Ccs. Sorry about the whole-patch-quote, but I want jbd2
folks to see what we're doing.]
On Tue, Jun 29, 2010 at 05:16:11PM -0700, Patrick J. LoPresti wrote:
> The OCFS2 developers have already done all of the hard work to allow
> volumes larger than 16 TiB. But there is still a "sanity check" in
> fs/ocfs2/super.c that prevents the mounting of such volumes, even when
> the cluster size and journal options would allow it.
>
> This patch replaces that sanity check with a more sophisticated one to
> mount a huge volume provided that (a) it is addressable by the raw
> word/address size of the system (borrowing a test from ext4); (b) the
> volume is using JBD2; and (c) the JBD2_FEATURE_INCOMPAT_64BIT flag is
> set on the journal.
>
> I factored out the sanity check into its own function. I also moved it
> from ocfs2_initialize_super() down to ocfs2_check_volume(); any earlier,
> and the journal's flags have not been read from disk yet.
>
> I have tested this patch on small volumes, huge volumes, and huge
> volumes without 64-bit block support in the journal. All of them appear
> to work or to fail gracefully, as appropriate.
>
> Signed-off-by: Patrick LoPresti <[email protected]>
>
>
> diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
> index 0eaa929..3db233d 100644
> --- a/fs/ocfs2/super.c
> +++ b/fs/ocfs2/super.c
> @@ -1991,6 +1991,47 @@ static int ocfs2_setup_osb_uuid(struct ocfs2_super *osb, const unsigned char *uu
> return 0;
> }
>
> +/* Check to make sure entire volume is addressable on this system.
> + Requires osb_clusters_at_boot to be valid and for the journal to
> + have been read by jbd2_journal_load(). */
> +static int ocfs2_check_addressable(struct ocfs2_super *osb)
> +{
> + int status = 0;
> + u64 max_block =
> + ocfs2_clusters_to_blocks(osb->sb,
> + osb->osb_clusters_at_boot) - 1;
> +
> + /* Absolute addressability check (borrowed from ext4/super.c) */
> + if ((max_block >
> + (sector_t)(~0LL) >> (osb->sb->s_blocksize_bits - 9)) ||
> + (max_block > (pgoff_t)(~0LL) >> (PAGE_CACHE_SHIFT -
> + osb->sb->s_blocksize_bits))) {
> + mlog(ML_ERROR, "Volume too large "
> + "to mount safely on this system");
> + status = -EFBIG;
> + goto out;
> + }
> +
> + /* 32-bit block number is always OK. */
> + if (max_block <= (u32)~0UL)
> + goto out;
> +
> + /* Volume is "huge", so see if our journal is new enough to
> + support it. */
> + if (!(OCFS2_HAS_COMPAT_FEATURE(osb->sb,
> + OCFS2_FEATURE_COMPAT_JBD2_SB) &&
> + jbd2_journal_check_used_features(osb->journal->j_journal, 0, 0,
> + JBD2_FEATURE_INCOMPAT_64BIT))) {
> + mlog(ML_ERROR, "The journal cannot address the entire volume. "
> + "Enable the 'block64' journal option with tunefs.ocfs2");
> + status = -EFBIG;
> + goto out;
> + }
> +
> + out:
> + return status;
> +}
> +
> static int ocfs2_initialize_super(struct super_block *sb,
> struct buffer_head *bh,
> int sector_size,
> @@ -2215,14 +2256,6 @@ static int ocfs2_initialize_super(struct super_block *sb,
> goto bail;
> }
>
> - if (ocfs2_clusters_to_blocks(osb->sb, le32_to_cpu(di->i_clusters) - 1)
> - > (u32)~0UL) {
> - mlog(ML_ERROR, "Volume might try to write to blocks beyond "
> - "what jbd can address in 32 bits.\n");
> - status = -EINVAL;
> - goto bail;
> - }
> -
> if (ocfs2_setup_osb_uuid(osb, di->id2.i_super.s_uuid,
> sizeof(di->id2.i_super.s_uuid))) {
> mlog(ML_ERROR, "Out of memory trying to setup our uuid.\n");
> @@ -2404,6 +2437,12 @@ static int ocfs2_check_volume(struct ocfs2_super *osb)
> goto finally;
> }
>
> + /* Now that journal has been loaded, check to make sure entire
> + volume is addressable. */
> + status = ocfs2_check_addressable(osb);
> + if (status)
> + goto finally;
> +
> if (dirty) {
> /* recover my local alloc if we didn't unmount cleanly. */
> status = ocfs2_begin_local_alloc_recovery(osb,
This is completely unsafe. Two reasons. First, you're checking
the journal features after ocfs2_journal_load() has done recovery. This
may or may not be safe; recovering a 32bit journal probably works even
on a 64bit filesystem, and we shouldn't see that combination in the
wild anyway. That's not so bad.
Far worse is that you might recover a 64bit journal before
you've checked the sector_t or pagecache limits. That's not acceptable.
I think the best solution is to check all the limits before you
load the journal. However, jbd2 doesn't quite let you do that yet.
Thus, I propose the following jbd2 patch. jbd2 people, what do you
think:
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index bc2ff59..7922d87 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -1365,6 +1365,8 @@ int jbd2_journal_check_used_features (journal_t
*journal,
if (!compat && !ro && !incompat)
return 1;
+ if (journal_get_superblock(journal))
+ return 0
if (journal->j_format_version == 1)
return 0;
If the jbd2 maintainers will allow this patch, you can put
together a two-change series that first modifies jbd2 and then adds
ocfs2_check_addressable() *before* ocfs2_journal_load().
Joel
--
Life's Little Instruction Book #314
"Never underestimate the power of forgiveness."
Joel Becker
Consulting Software Developer
Oracle
E-mail: [email protected]
Phone: (650) 506-8127
On Tue, Jul 6, 2010 at 1:04 PM, Joel Becker <[email protected]> wrote:
>
> Thus, I propose the following jbd2 patch. ?jbd2 people, what do you
> think:
>
> diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
> index bc2ff59..7922d87 100644
> --- a/fs/jbd2/journal.c
> +++ b/fs/jbd2/journal.c
> @@ -1365,6 +1365,8 @@ int jbd2_journal_check_used_features (journal_t
> *journal,
>
> ? ? ? ?if (!compat && !ro && !incompat)
> ? ? ? ? ? ? ? ?return 1;
> + ? ? ? if (journal_get_superblock(journal))
> + ? ? ? ? ? ? ? return 0
> ? ? ? ?if (journal->j_format_version == 1)
> ? ? ? ? ? ? ? ?return 0;
As an alternative, could jbd2_journal_init_inode() just call
journal_get_superblock() itself? That would naturally make the
feature bits valid as soon as the journal is initialized. It would
also preserve all error checking, instead of converting superblock
read errors into "this journal has no features".
JBD2 developers, please advise. OCFS2 needs to examine JBD2 journal
feature bits *before* the journal is recovered, which is not possible
at present. What is the best approach to fixing this?
Thanks.
- Pat