SHARPSL_LOCOMO doesn't exist in Kconfig, therefore removing all
references for it from the source code.
Signed-off-by: Christoph Egger <[email protected]>
---
arch/arm/mach-sa1100/include/mach/irqs.h | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index 8c8845b..123c6c9 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -77,8 +77,6 @@
*/
#ifdef CONFIG_SA1111
#define NR_IRQS (IRQ_BOARD_END + 55)
-#elif defined(CONFIG_SHARPSL_LOCOMO)
-#define NR_IRQS (IRQ_BOARD_START + 4)
#else
#define NR_IRQS (IRQ_BOARD_START)
#endif
--
1.7.0.4
Christoph Egger wrote:
> SHARPSL_LOCOMO doesn't exist in Kconfig, therefore removing all
> references for it from the source code.
Hmmm. Shouldn't this be instead just SHARP_LOCOMO?
>
> Signed-off-by: Christoph Egger <[email protected]> ---
--
With best wishes
Dmitry
On Wed, Jun 30, 2010 at 11:55 PM, Christoph Egger <[email protected]> wrote:
> SHARPSL_LOCOMO doesn't exist in Kconfig, therefore removing all
> references for it from the source code.
>
A good catch, though SHARPSL_LOCOMO has be changed to SHARP_LOCOMO
later, so a better fix would be the name change only.
> Signed-off-by: Christoph Egger <[email protected]>
> ---
> arch/arm/mach-sa1100/include/mach/irqs.h | 2 --
> 1 files changed, 0 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
> index 8c8845b..123c6c9 100644
> --- a/arch/arm/mach-sa1100/include/mach/irqs.h
> +++ b/arch/arm/mach-sa1100/include/mach/irqs.h
> @@ -77,8 +77,6 @@
> */
> #ifdef CONFIG_SA1111
> #define NR_IRQS (IRQ_BOARD_END + 55)
> -#elif defined(CONFIG_SHARPSL_LOCOMO)
> -#define NR_IRQS (IRQ_BOARD_START + 4)
> #else
> #define NR_IRQS (IRQ_BOARD_START)
> #endif
> --
> 1.7.0.4
>
>
On Thu, Jul 01, 2010 at 10:34:13AM +0800, Eric Miao wrote:
> On Wed, Jun 30, 2010 at 11:55 PM, Christoph Egger <[email protected]> wrote:
> > SHARPSL_LOCOMO doesn't exist in Kconfig, therefore removing all
> > references for it from the source code.
> >
>
> A good catch, though SHARPSL_LOCOMO has be changed to SHARP_LOCOMO
> later, so a better fix would be the name change only.
Hi! Updated patch below
----
From: Christoph Egger <[email protected]>
Date: Wed, 30 Jun 2010 12:36:20 +0200
Subject: [PATCH 06/33] Replacing dead SHARPSL_LOCOMO with SHARP_LOCOMO
SHARP_LOCOMO doesn't exist in Kconfig, therefore replacing all
references for it with SHARP_LOCOMO in the source code.
Signed-off-by: Christoph Egger <[email protected]>
---
arch/arm/mach-sa1100/include/mach/irqs.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index 8c8845b..d18f21a 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -77,7 +77,7 @@
*/
#ifdef CONFIG_SA1111
#define NR_IRQS (IRQ_BOARD_END + 55)
-#elif defined(CONFIG_SHARPSL_LOCOMO)
+#elif defined(CONFIG_SHARP_LOCOMO)
#define NR_IRQS (IRQ_BOARD_START + 4)
#else
#define NR_IRQS (IRQ_BOARD_START)
--
1.7.0.4
On Thu, Jul 1, 2010 at 9:23 PM, Christoph Egger <[email protected]> wrote:
> On Thu, Jul 01, 2010 at 10:34:13AM +0800, Eric Miao wrote:
>> On Wed, Jun 30, 2010 at 11:55 PM, Christoph Egger <[email protected]> wrote:
>> > SHARPSL_LOCOMO doesn't exist in Kconfig, therefore removing all
>> > references for it from the source code.
>> >
>>
>> A good catch, though SHARPSL_LOCOMO has be changed to SHARP_LOCOMO
>> later, so a better fix would be the name change only.
>
> Hi! Updated patch below
>
> ----
> From: Christoph Egger <[email protected]>
> Date: Wed, 30 Jun 2010 12:36:20 +0200
> Subject: [PATCH 06/33] Replacing dead SHARPSL_LOCOMO with SHARP_LOCOMO
>
> SHARP_LOCOMO doesn't exist in Kconfig, therefore replacing all
> references for it with SHARP_LOCOMO in the source code.
>
> Signed-off-by: Christoph Egger <[email protected]>
Acked-by: Eric Miao <[email protected]>
> ---
> arch/arm/mach-sa1100/include/mach/irqs.h | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
> index 8c8845b..d18f21a 100644
> --- a/arch/arm/mach-sa1100/include/mach/irqs.h
> +++ b/arch/arm/mach-sa1100/include/mach/irqs.h
> @@ -77,7 +77,7 @@
> */
> #ifdef CONFIG_SA1111
> #define NR_IRQS (IRQ_BOARD_END + 55)
> -#elif defined(CONFIG_SHARPSL_LOCOMO)
> +#elif defined(CONFIG_SHARP_LOCOMO)
> #define NR_IRQS (IRQ_BOARD_START + 4)
> #else
> #define NR_IRQS (IRQ_BOARD_START)
> --
> 1.7.0.4
>
>
>
On Thu, Jul 1, 2010 at 10:40 PM, Eric Miao <[email protected]> wrote:
> On Thu, Jul 1, 2010 at 9:23 PM, Christoph Egger <[email protected]> wrote:
>> On Thu, Jul 01, 2010 at 10:34:13AM +0800, Eric Miao wrote:
>>> On Wed, Jun 30, 2010 at 11:55 PM, Christoph Egger <[email protected]> wrote:
>>> > SHARPSL_LOCOMO doesn't exist in Kconfig, therefore removing all
>>> > references for it from the source code.
>>> >
>>>
>>> A good catch, though SHARPSL_LOCOMO has be changed to SHARP_LOCOMO
>>> later, so a better fix would be the name change only.
>>
>> Hi! Updated patch below
>>
>> ----
>> From: Christoph Egger <[email protected]>
>> Date: Wed, 30 Jun 2010 12:36:20 +0200
>> Subject: [PATCH 06/33] Replacing dead SHARPSL_LOCOMO with SHARP_LOCOMO
>>
>> SHARP_LOCOMO doesn't exist in Kconfig, therefore replacing all
>> references for it with SHARP_LOCOMO in the source code.
>>
>> Signed-off-by: Christoph Egger <[email protected]>
>
> Acked-by: Eric Miao <[email protected]>
>
Applied.