2011-03-09 14:16:43

by saeed bishara

Subject: Re: [PATCH] stable: sheevaplug-setup.c fix LED color name and add support for second LED This is a patch to the sheevaplug-setup.c file that fixes the color name of the existing health LED. That LED gpio 49 is green when off and blue when on. The pat

On Wed, Mar 9, 2011 at 3:27 PM, Robin Becker <[email protected]> wrote:
> From: replabrobin <[email protected]>
please use short subject for this commit, and move the description
into the commit description section
aslo, I would split this to two patches, one fixes the LED color name,
the second for adding the new LED.

>  static unsigned int sheevaplug_mpp_config[] __initdata = {
>        MPP29_GPIO,     /* USB Power Enable */
> -       MPP49_GPIO,     /* LED */
> +       MPP46_GPIO,     /* RED LED */
> +       MPP49_GPIO,     /* BLUE LED */
>        0
>  };
>
>  static unsigned int sheeva_esata_mpp_config[] __initdata = {
>        MPP29_GPIO,     /* USB Power Enable */
>        MPP44_GPIO,     /* SD Write Protect */
> +       MPP46_GPIO,     /* RED LED */
>        MPP47_GPIO,     /* SD Card Detect */
>        MPP49_GPIO,     /* LED Green */
please fix the comment as well