Add i.MX SCU SoC info driver to support i.MX8QXP SoC, introduce
driver dependency into Kconfig as CONFIG_IMX_SCU must be
selected to support i.MX SCU SoC driver, also need to use
platform driver model to make sure IMX_SCU driver is probed
before i.MX SCU SoC driver.
With this patch, SoC info can be read from sysfs:
i.mx8qxp-mek# cat /sys/devices/soc0/family
Freescale i.MX
i.mx8qxp-mek# cat /sys/devices/soc0/soc_id
0x2
i.mx8qxp-mek# cat /sys/devices/soc0/machine
Freescale i.MX8QXP MEK
i.mx8qxp-mek# cat /sys/devices/soc0/revision
1.1
Signed-off-by: Anson Huang <[email protected]>
---
Changes since V4:
- using extern struct of_root instead of searching it again from DT;
- add of_node_put() after "fsl,imx-scu" is found.
---
drivers/soc/imx/Kconfig | 9 +++
drivers/soc/imx/Makefile | 1 +
drivers/soc/imx/soc-imx-scu.c | 155 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 165 insertions(+)
create mode 100644 drivers/soc/imx/soc-imx-scu.c
diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index d80f899..cbc1a41 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -7,4 +7,13 @@ config IMX_GPCV2_PM_DOMAINS
select PM_GENERIC_DOMAINS
default y if SOC_IMX7D
+config IMX_SCU_SOC
+ bool "i.MX System Controller Unit SoC info support"
+ depends on IMX_SCU
+ select SOC_BUS
+ help
+ If you say yes here you get support for the NXP i.MX System
+ Controller Unit SoC info module, it will provide the SoC info
+ like SoC family, ID and revision etc.
+
endmenu
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
index d6b529e0..ddf343d 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
obj-$(CONFIG_ARCH_MXC) += soc-imx8.o
+obj-$(CONFIG_IMX_SCU_SOC) += soc-imx-scu.o
diff --git a/drivers/soc/imx/soc-imx-scu.c b/drivers/soc/imx/soc-imx-scu.c
new file mode 100644
index 0000000..17deb4e
--- /dev/null
+++ b/drivers/soc/imx/soc-imx-scu.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP.
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#define IMX_SCU_SOC_DRIVER_NAME "imx-scu-soc"
+
+static struct imx_sc_ipc *soc_ipc_handle;
+
+struct imx_sc_msg_misc_get_soc_id {
+ struct imx_sc_rpc_msg hdr;
+ union {
+ struct {
+ u32 control;
+ u16 resource;
+ } send;
+ struct {
+ u32 id;
+ u16 reserved;
+ } resp;
+ } data;
+} __packed;
+
+static u32 imx_scu_soc_id(void)
+{
+ struct imx_sc_msg_misc_get_soc_id msg;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ int ret;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_MISC;
+ hdr->func = IMX_SC_MISC_FUNC_GET_CONTROL;
+ hdr->size = 3;
+
+ msg.data.send.control = IMX_SC_C_ID;
+ msg.data.send.resource = IMX_SC_R_SYSTEM;
+
+ ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
+ if (ret) {
+ pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
+ /* return 0 means getting revision failed */
+ return 0;
+ }
+
+ return msg.data.resp.id;
+}
+
+static int imx_scu_soc_probe(struct platform_device *pdev)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ u32 id, val;
+ int ret;
+
+ /* wait i.MX SCU driver ready */
+ ret = imx_scu_get_handle(&soc_ipc_handle);
+ if (ret)
+ return ret;
+
+ soc_dev_attr = devm_kzalloc(&pdev->dev, sizeof(*soc_dev_attr),
+ GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Freescale i.MX";
+
+ ret = of_property_read_string(of_root,
+ "model",
+ &soc_dev_attr->machine);
+ if (ret)
+ return ret;
+
+ id = imx_scu_soc_id();
+
+ /* format soc_id value passed from SCU firmware */
+ val = id & 0x1f;
+ soc_dev_attr->soc_id = val ? kasprintf(GFP_KERNEL, "0x%x", val)
+ : "unknown";
+ if (!soc_dev_attr->soc_id)
+ return -ENOMEM;
+
+ /* format revision value passed from SCU firmware */
+ val = (id >> 5) & 0xf;
+ val = (((val >> 2) + 1) << 4) | (val & 0x3);
+ soc_dev_attr->revision = val ? kasprintf(GFP_KERNEL,
+ "%d.%d",
+ (val >> 4) & 0xf,
+ val & 0xf) : "unknown";
+ if (!soc_dev_attr->revision) {
+ ret = -ENOMEM;
+ goto free_soc_id;
+ }
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ ret = PTR_ERR(soc_dev);
+ goto free_revision;
+ }
+
+ return 0;
+
+free_revision:
+ kfree(soc_dev_attr->revision);
+free_soc_id:
+ kfree(soc_dev_attr->soc_id);
+ return ret;
+}
+
+static struct platform_driver imx_scu_soc_driver = {
+ .driver = {
+ .name = IMX_SCU_SOC_DRIVER_NAME,
+ },
+ .probe = imx_scu_soc_probe,
+};
+
+static int __init imx_scu_soc_init(void)
+{
+ struct platform_device *imx_scu_soc_pdev;
+ struct device_node *np;
+ int ret;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx-scu");
+ if (!np)
+ return -ENODEV;
+
+ of_node_put(np);
+
+ ret = platform_driver_register(&imx_scu_soc_driver);
+ if (ret)
+ return ret;
+
+ imx_scu_soc_pdev =
+ platform_device_register_simple(IMX_SCU_SOC_DRIVER_NAME,
+ -1,
+ NULL,
+ 0);
+ if (IS_ERR(imx_scu_soc_pdev)) {
+ ret = PTR_ERR(imx_scu_soc_pdev);
+ goto unreg_platform_driver;
+ }
+
+ return 0;
+
+unreg_platform_driver:
+ platform_driver_unregister(&imx_scu_soc_driver);
+ return ret;
+}
+device_initcall(imx_scu_soc_init);
--
2.7.4
This patch selects CONFIG_IMX_SCU_SOC by default to support
i.MX system controller unit SoC info driver.
Signed-off-by: Anson Huang <[email protected]>
---
No changes.
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 3a1b846..61be39b 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -693,6 +693,7 @@ CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_QCOM_GLINK_SMEM=m
CONFIG_RPMSG_QCOM_SMD=y
CONFIG_RASPBERRYPI_POWER=y
+CONFIG_IMX_SCU_SOC=y
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=y
CONFIG_QCOM_GLINK_SSR=m
--
2.7.4
On 19-05-22 06:23:31, Anson Huang wrote:
> Add i.MX SCU SoC info driver to support i.MX8QXP SoC, introduce
> driver dependency into Kconfig as CONFIG_IMX_SCU must be
> selected to support i.MX SCU SoC driver, also need to use
> platform driver model to make sure IMX_SCU driver is probed
> before i.MX SCU SoC driver.
>
> With this patch, SoC info can be read from sysfs:
>
> i.mx8qxp-mek# cat /sys/devices/soc0/family
> Freescale i.MX
>
> i.mx8qxp-mek# cat /sys/devices/soc0/soc_id
> 0x2
>
> i.mx8qxp-mek# cat /sys/devices/soc0/machine
> Freescale i.MX8QXP MEK
>
> i.mx8qxp-mek# cat /sys/devices/soc0/revision
> 1.1
>
> Signed-off-by: Anson Huang <[email protected]>
For the entire series:
Reviewed-by: Abel Vesa <[email protected]>
> ---
> Changes since V4:
> - using extern struct of_root instead of searching it again from DT;
> - add of_node_put() after "fsl,imx-scu" is found.
> ---
> drivers/soc/imx/Kconfig | 9 +++
> drivers/soc/imx/Makefile | 1 +
> drivers/soc/imx/soc-imx-scu.c | 155 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 165 insertions(+)
> create mode 100644 drivers/soc/imx/soc-imx-scu.c
>
> diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
> index d80f899..cbc1a41 100644
> --- a/drivers/soc/imx/Kconfig
> +++ b/drivers/soc/imx/Kconfig
> @@ -7,4 +7,13 @@ config IMX_GPCV2_PM_DOMAINS
> select PM_GENERIC_DOMAINS
> default y if SOC_IMX7D
>
> +config IMX_SCU_SOC
> + bool "i.MX System Controller Unit SoC info support"
> + depends on IMX_SCU
> + select SOC_BUS
> + help
> + If you say yes here you get support for the NXP i.MX System
> + Controller Unit SoC info module, it will provide the SoC info
> + like SoC family, ID and revision etc.
> +
> endmenu
> diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
> index d6b529e0..ddf343d 100644
> --- a/drivers/soc/imx/Makefile
> +++ b/drivers/soc/imx/Makefile
> @@ -1,3 +1,4 @@
> obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
> obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
> obj-$(CONFIG_ARCH_MXC) += soc-imx8.o
> +obj-$(CONFIG_IMX_SCU_SOC) += soc-imx-scu.o
> diff --git a/drivers/soc/imx/soc-imx-scu.c b/drivers/soc/imx/soc-imx-scu.c
> new file mode 100644
> index 0000000..17deb4e
> --- /dev/null
> +++ b/drivers/soc/imx/soc-imx-scu.c
> @@ -0,0 +1,155 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2019 NXP.
> + */
> +
> +#include <dt-bindings/firmware/imx/rsrc.h>
> +#include <linux/firmware/imx/sci.h>
> +#include <linux/slab.h>
> +#include <linux/sys_soc.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +
> +#define IMX_SCU_SOC_DRIVER_NAME "imx-scu-soc"
> +
> +static struct imx_sc_ipc *soc_ipc_handle;
> +
> +struct imx_sc_msg_misc_get_soc_id {
> + struct imx_sc_rpc_msg hdr;
> + union {
> + struct {
> + u32 control;
> + u16 resource;
> + } send;
> + struct {
> + u32 id;
> + u16 reserved;
> + } resp;
> + } data;
> +} __packed;
> +
> +static u32 imx_scu_soc_id(void)
> +{
> + struct imx_sc_msg_misc_get_soc_id msg;
> + struct imx_sc_rpc_msg *hdr = &msg.hdr;
> + int ret;
> +
> + hdr->ver = IMX_SC_RPC_VERSION;
> + hdr->svc = IMX_SC_RPC_SVC_MISC;
> + hdr->func = IMX_SC_MISC_FUNC_GET_CONTROL;
> + hdr->size = 3;
> +
> + msg.data.send.control = IMX_SC_C_ID;
> + msg.data.send.resource = IMX_SC_R_SYSTEM;
> +
> + ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
> + if (ret) {
> + pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
> + /* return 0 means getting revision failed */
> + return 0;
> + }
> +
> + return msg.data.resp.id;
> +}
> +
> +static int imx_scu_soc_probe(struct platform_device *pdev)
> +{
> + struct soc_device_attribute *soc_dev_attr;
> + struct soc_device *soc_dev;
> + u32 id, val;
> + int ret;
> +
> + /* wait i.MX SCU driver ready */
> + ret = imx_scu_get_handle(&soc_ipc_handle);
> + if (ret)
> + return ret;
> +
> + soc_dev_attr = devm_kzalloc(&pdev->dev, sizeof(*soc_dev_attr),
> + GFP_KERNEL);
> + if (!soc_dev_attr)
> + return -ENOMEM;
> +
> + soc_dev_attr->family = "Freescale i.MX";
> +
> + ret = of_property_read_string(of_root,
> + "model",
> + &soc_dev_attr->machine);
> + if (ret)
> + return ret;
> +
> + id = imx_scu_soc_id();
> +
> + /* format soc_id value passed from SCU firmware */
> + val = id & 0x1f;
> + soc_dev_attr->soc_id = val ? kasprintf(GFP_KERNEL, "0x%x", val)
> + : "unknown";
> + if (!soc_dev_attr->soc_id)
> + return -ENOMEM;
> +
> + /* format revision value passed from SCU firmware */
> + val = (id >> 5) & 0xf;
> + val = (((val >> 2) + 1) << 4) | (val & 0x3);
> + soc_dev_attr->revision = val ? kasprintf(GFP_KERNEL,
> + "%d.%d",
> + (val >> 4) & 0xf,
> + val & 0xf) : "unknown";
> + if (!soc_dev_attr->revision) {
> + ret = -ENOMEM;
> + goto free_soc_id;
> + }
> +
> + soc_dev = soc_device_register(soc_dev_attr);
> + if (IS_ERR(soc_dev)) {
> + ret = PTR_ERR(soc_dev);
> + goto free_revision;
> + }
> +
> + return 0;
> +
> +free_revision:
> + kfree(soc_dev_attr->revision);
> +free_soc_id:
> + kfree(soc_dev_attr->soc_id);
> + return ret;
> +}
> +
> +static struct platform_driver imx_scu_soc_driver = {
> + .driver = {
> + .name = IMX_SCU_SOC_DRIVER_NAME,
> + },
> + .probe = imx_scu_soc_probe,
> +};
> +
> +static int __init imx_scu_soc_init(void)
> +{
> + struct platform_device *imx_scu_soc_pdev;
> + struct device_node *np;
> + int ret;
> +
> + np = of_find_compatible_node(NULL, NULL, "fsl,imx-scu");
> + if (!np)
> + return -ENODEV;
> +
> + of_node_put(np);
> +
> + ret = platform_driver_register(&imx_scu_soc_driver);
> + if (ret)
> + return ret;
> +
> + imx_scu_soc_pdev =
> + platform_device_register_simple(IMX_SCU_SOC_DRIVER_NAME,
> + -1,
> + NULL,
> + 0);
> + if (IS_ERR(imx_scu_soc_pdev)) {
> + ret = PTR_ERR(imx_scu_soc_pdev);
> + goto unreg_platform_driver;
> + }
> +
> + return 0;
> +
> +unreg_platform_driver:
> + platform_driver_unregister(&imx_scu_soc_driver);
> + return ret;
> +}
> +device_initcall(imx_scu_soc_init);
> --
> 2.7.4
>
> From: Anson Huang
> Sent: Wednesday, May 22, 2019 2:24 PM
>
> Add i.MX SCU SoC info driver to support i.MX8QXP SoC, introduce driver
> dependency into Kconfig as CONFIG_IMX_SCU must be selected to support
> i.MX SCU SoC driver, also need to use platform driver model to make sure
> IMX_SCU driver is probed before i.MX SCU SoC driver.
>
> With this patch, SoC info can be read from sysfs:
>
> i.mx8qxp-mek# cat /sys/devices/soc0/family Freescale i.MX
>
> i.mx8qxp-mek# cat /sys/devices/soc0/soc_id
> 0x2
>
> i.mx8qxp-mek# cat /sys/devices/soc0/machine Freescale i.MX8QXP MEK
>
> i.mx8qxp-mek# cat /sys/devices/soc0/revision
> 1.1
>
> Signed-off-by: Anson Huang <[email protected]>
A few minor comments below,
Otherwise:
Dong Aisheng <[email protected]>
> ---
> Changes since V4:
> - using extern struct of_root instead of searching it again from DT;
> - add of_node_put() after "fsl,imx-scu" is found.
> ---
> drivers/soc/imx/Kconfig | 9 +++
> drivers/soc/imx/Makefile | 1 +
> drivers/soc/imx/soc-imx-scu.c | 155
> ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 165 insertions(+)
> create mode 100644 drivers/soc/imx/soc-imx-scu.c
>
> diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig index
> d80f899..cbc1a41 100644
> --- a/drivers/soc/imx/Kconfig
> +++ b/drivers/soc/imx/Kconfig
> @@ -7,4 +7,13 @@ config IMX_GPCV2_PM_DOMAINS
> select PM_GENERIC_DOMAINS
> default y if SOC_IMX7D
>
> +config IMX_SCU_SOC
> + bool "i.MX System Controller Unit SoC info support"
> + depends on IMX_SCU
> + select SOC_BUS
> + help
> + If you say yes here you get support for the NXP i.MX System
> + Controller Unit SoC info module, it will provide the SoC info
> + like SoC family, ID and revision etc.
> +
> endmenu
> diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile index
> d6b529e0..ddf343d 100644
> --- a/drivers/soc/imx/Makefile
> +++ b/drivers/soc/imx/Makefile
> @@ -1,3 +1,4 @@
> obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
> obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
> obj-$(CONFIG_ARCH_MXC) += soc-imx8.o
> +obj-$(CONFIG_IMX_SCU_SOC) += soc-imx-scu.o
> diff --git a/drivers/soc/imx/soc-imx-scu.c b/drivers/soc/imx/soc-imx-scu.c new
> file mode 100644 index 0000000..17deb4e
> --- /dev/null
> +++ b/drivers/soc/imx/soc-imx-scu.c
> @@ -0,0 +1,155 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2019 NXP.
> + */
> +
> +#include <dt-bindings/firmware/imx/rsrc.h> #include
> +<linux/firmware/imx/sci.h> #include <linux/slab.h> #include
> +<linux/sys_soc.h> #include <linux/platform_device.h> #include
> +<linux/of.h>
> +
> +#define IMX_SCU_SOC_DRIVER_NAME "imx-scu-soc"
> +
> +static struct imx_sc_ipc *soc_ipc_handle;
> +
> +struct imx_sc_msg_misc_get_soc_id {
> + struct imx_sc_rpc_msg hdr;
> + union {
> + struct {
> + u32 control;
> + u16 resource;
> + } send;
Please follow the exist naming conversion to avoid a diverge if no specific reasons.
s/send/req
BTW, sub structures also needs packed and better add an explicit __packed
As I'm not sure whether GCC will always generate no padding for ARM64 platforms
For above structures.
> + struct {
> + u32 id;
> + u16 reserved;
What's reserved member for?
> + } resp;
> + } data;
> +} __packed;
> +
> +static u32 imx_scu_soc_id(void)
> +{
> + struct imx_sc_msg_misc_get_soc_id msg;
> + struct imx_sc_rpc_msg *hdr = &msg.hdr;
> + int ret;
> +
> + hdr->ver = IMX_SC_RPC_VERSION;
> + hdr->svc = IMX_SC_RPC_SVC_MISC;
> + hdr->func = IMX_SC_MISC_FUNC_GET_CONTROL;
> + hdr->size = 3;
> +
> + msg.data.send.control = IMX_SC_C_ID;
> + msg.data.send.resource = IMX_SC_R_SYSTEM;
> +
> + ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
> + if (ret) {
> + pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
> + /* return 0 means getting revision failed */
> + return 0;
> + }
> +
> + return msg.data.resp.id;
> +}
> +
> +static int imx_scu_soc_probe(struct platform_device *pdev) {
> + struct soc_device_attribute *soc_dev_attr;
> + struct soc_device *soc_dev;
> + u32 id, val;
> + int ret;
> +
> + /* wait i.MX SCU driver ready */
Nitpick: remove this unnecessary line
> + ret = imx_scu_get_handle(&soc_ipc_handle);
> + if (ret)
> + return ret;
> +
> + soc_dev_attr = devm_kzalloc(&pdev->dev, sizeof(*soc_dev_attr),
> + GFP_KERNEL);
> + if (!soc_dev_attr)
> + return -ENOMEM;
> +
> + soc_dev_attr->family = "Freescale i.MX";
> +
> + ret = of_property_read_string(of_root,
> + "model",
> + &soc_dev_attr->machine);
> + if (ret)
> + return ret;
> +
> + id = imx_scu_soc_id();
> +
> + /* format soc_id value passed from SCU firmware */
> + val = id & 0x1f;
> + soc_dev_attr->soc_id = val ? kasprintf(GFP_KERNEL, "0x%x", val)
> + : "unknown";
> + if (!soc_dev_attr->soc_id)
> + return -ENOMEM;
> +
> + /* format revision value passed from SCU firmware */
> + val = (id >> 5) & 0xf;
> + val = (((val >> 2) + 1) << 4) | (val & 0x3);
> + soc_dev_attr->revision = val ? kasprintf(GFP_KERNEL,
> + "%d.%d",
> + (val >> 4) & 0xf,
> + val & 0xf) : "unknown";
> + if (!soc_dev_attr->revision) {
> + ret = -ENOMEM;
> + goto free_soc_id;
> + }
> +
> + soc_dev = soc_device_register(soc_dev_attr);
> + if (IS_ERR(soc_dev)) {
> + ret = PTR_ERR(soc_dev);
> + goto free_revision;
> + }
> +
> + return 0;
> +
> +free_revision:
> + kfree(soc_dev_attr->revision);
> +free_soc_id:
> + kfree(soc_dev_attr->soc_id);
> + return ret;
> +}
> +
> +static struct platform_driver imx_scu_soc_driver = {
> + .driver = {
> + .name = IMX_SCU_SOC_DRIVER_NAME,
> + },
> + .probe = imx_scu_soc_probe,
> +};
> +
> +static int __init imx_scu_soc_init(void) {
> + struct platform_device *imx_scu_soc_pdev;
> + struct device_node *np;
> + int ret;
> +
> + np = of_find_compatible_node(NULL, NULL, "fsl,imx-scu");
> + if (!np)
> + return -ENODEV;
> +
> + of_node_put(np);
> +
> + ret = platform_driver_register(&imx_scu_soc_driver);
> + if (ret)
> + return ret;
> +
> + imx_scu_soc_pdev =
> + platform_device_register_simple(IMX_SCU_SOC_DRIVER_NAME,
> + -1,
> + NULL,
> + 0);
[...]
> + if (IS_ERR(imx_scu_soc_pdev)) {
> + ret = PTR_ERR(imx_scu_soc_pdev);
> + goto unreg_platform_driver;
> + }
> +
> + return 0;
> +
> +unreg_platform_driver:
> + platform_driver_unregister(&imx_scu_soc_driver);
> + return ret;
> +}
This could be simplied with 3 lines:
If (IS_ERR(pdev))
Platform_driver_unregsiter(xxx)
Return PTR_ERR_OR_ZERO(pdev)
Regards
Dong Aisheng
> +device_initcall(imx_scu_soc_init);
> --
> 2.7.4
> From: Anson Huang
> Sent: Wednesday, May 22, 2019 2:24 PM
>
> This patch selects CONFIG_IMX_SCU_SOC by default to support i.MX system
> controller unit SoC info driver.
>
> Signed-off-by: Anson Huang <[email protected]>
Reviewed-by: Dong Aisheng <[email protected]>
Regards
Dong Aisheng